Multiple problems with PC Suite 6.80 and bluetooth

After several frustrating hours with a spiral of problems, I hope someone can see a way to get this (rubbish) PC Suite software working with my 6230i phone. - System is XP SP2 on a Dell Inspiron 8600 with bluetooth built in. - Syncing with Lotus Notes 6.5 - PC Suite version I'm attempting to get working is 6.80.22 (latest as of 9/6/2006) Started with PC Suite 4.88 installed (for a 6310i phone - was trying to find a way to move contacts). This software however, had stopped working for this phone.... Day 1 - Installed PC Suite 6.8.22 (as well as 4.88) and after while got this working (sort of) - at least I got the Sync function to work OK (not the contacts list however for example) Day 2 - updated an address on PC and on phone and tried to Sync - alwasy just sat there trying to connect - nothing has changed since yesterday. (selected two way updated in advanced properties) (several hours of wasted life on a sunny evening later) Read all the stuff on this board I could and decided that problem might be because the System Info showed that I had Widcomm and Microsoft bluetooth installed. So: 1. uninstalled 4.88 version 2. Didn't read instructions carefully enough so didn't uninstall 6.80.22 3. ran the Nokia PC Suite Cleaner 3.3 (selected Other - said Yes to deleting .exe, no to deleting .dll's - wouldn't have got this if 6.80.22 was uninstalled) 4. installed 6.80.22 - tried 3 times and kept getting an error about missing components in the .msi file. Downloaded new copy, reinstall - same message, try once more, suddenly install works without error! 5. Try to connect to phone - now get error saying "no available connection type" - i.e bluetooth not working. - check System Info - "no supported bluetooth Stack" is listed. (Had both Widcomm and MS before) - check I CAN connect to the phone using e.g. bluetooth icon on and using say the "Audio gateway" function - so bluetooth IS installed OK - just PC Suite doesn't recognise. 6. Uninstalled PC Suite 6.80.22 7. Ran Nokia PC Suite Cleaner 3.3, selecting "other" 8. Install PC Suite 6.80.22 9. Try to connect - exactly the same problem as before. 10. Try to activate MS bluetooth - using CP-> System-> hardware-> device manager-> bluetooth devices-> properties -> driver -> update driver as suggested elsewhere but find that after “bluetooth devices” I have to select “Dell TrueMobile Bluetooth Module” befpre driver-> update driver (which tells me that it is updated – though at least twice before I have found newer drivers after being given this message) 11. Go to bed after 6 wasted hours. (sorry if there is no formatting in this - there was when I typed it, but the preview shows none and I can't seem to add any spaces,lines etc) Thanks Andrew

Hi Manta
After a downward spiral where the BT stopped working at some point during an install/uninstall, so i tried to follow some of the guides to sort out removing Microsoft BT and only having Widcomm - however at almost every turn there were problems, error messages not anticipated etc. to the point where nothing worked....
Eventually thought to go back to a XP restore point which got the BT working again. (Microsoft and Widcomm drivers are both installed as before).
Then had to run PC suite 4.88 to remove (kept getting error messgaes by doing it from add/remove in ctrl panel) and then had to reinstall PC suite 6.80-22 and removing it also gave unanticipated error messages.
Did as you suggest and ran the cleaner through every stage (requiring 4 or so "installs" of this software and 3 reboots if you do as the software tells you..)
Reinstalled and it almost seems to work as well as it did when I first installed it - apart from now I can't sync my calendar - get a message about the server being down even though it clearly isn't as I can use my email and calender though the Notes client without a problem...
Dodgy PC suite software again??
(I've also noticed that if you have tried to sync and it fails and then you try again, it pretends to have done a sync but in fact as long as the fail message is on the phone screen this will lock it out from another sync function...though this is not clear on the PC)
If you or anyone else has any idea about the server connection failure message I'd appreciate hearing about it - and I'll go and have a look throught the boards to see if anyone else has seen this.
CHeers
Andrew

Similar Messages

Problem with the connection wi fi and bluetooth

I can not activate the box for "wi fi" and the box "bluetooth" in my device, when I activate the "check" my device removes it…
My device is 9800 torch…can you tell me why is the problem..??
Can send me a answer to my e mail [personal information removed] Thanks

Try this -
When you device is POWERED ON, remove the battery for a minute, and then reinsert the battery. This make a reboot to your device which resolves minor issues with the BlackBerry device.
And then try connecting Wi-Fi or Bluetooth.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Problems between Pc suite 6.8 and Bluetooth connec...

regards from Mexico!!
this is my first post here, after read several post kind related I still have following error :
When trying to connect to PC suite I get this message:
"cannot use the connection type. check all the needed hardware, software and drivers are available"
I have made all fixes for Win XP SP2 (I can sync my iPAQ 2415 with active sync)
have dell laptop latitude D610
using belkin f8t001 V2 bt driver 1.4.2.10
Nokia Pc suite ver 6.80.20 (uninstalled/installed again)
I’m able to get OBEX file transfer from my BT places with 6230
I have the com6 as bt serial port
What am I dong wrong?????
Your comments and help will be appreciated!!
Tnks

hi 6230mx
have a look at the No Available Connection Type topic in this section
There are only 10 types of people in this world. Those who understand binary and those who don't

Having multiple problems with script - NTFS Permissions and AD Groups

Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!

I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though.

Multiple problems with Mail

Here is the setup:
iMac Intel running 10.4.8
Mail 2.1.1
seperate user accounts, each with their own email address
email is valornet.com (local ISP), set up to download to Mail
Multiple problems with one of the user accounts (not affecting the others):
1. Multiple copies in the inbox of the same message. These are brand new, not a week old as some other threads have mentioned. When I go to Preferences/Accounts/Advanced I have already clicked the "Remove Now" button, also the "Remove copy from server..." is checked.
2. Mail will not stop retrieving new mail. The circle thing next to the Inbox on the left just keeps spinning, and spinning, and spinning...
3. Cannot quit Mail. Have to go in Activity Monitor and Force Quit.
4. My trash folder is gone.
If anyone can help me clean up this mess, I would appreciate it.

Verify/repair the startup disk (not just
permissions), as described here:
Th
e Repair functions of Disk Utility: what's it all
about?
Minor bitmap problem needed fixing; fixed.
Go to Apple Menu > System Preferences >
Network, choose Network Port
Configurations from the Show popup menu,
and make sure that the configuration used to connect
to Internet appears at the top of the list.
It was showing Bluetooth first and ethernet 2nd; I moved ethernet to the top.
In Mail, open Window > Activity Viewer. What
do you see Mail doing there? Actually, you may be
able to avoid having to force quit Mail by canceling
whatever it’s doing (by clicking on the red stop icon
of the activity).
"Fetching new mail
Fetching 5 of 5: updates on buses - Haskell Middle School"
blue bar is moving, red stop icon is bright. I clicked on the stop icon and it "grayed out" but Mail did not stop the spinning circle next to the inbox. Still had to force quit.
What are your Mail > Preferences > Accounts >
Mailbox Behaviors > Trash settings?
Trash can is back! One problem solved...
Do you have any Mail plug-ins or any system utilities
that could interfere with Mail? In the Finder, go to
each of the following folders (if they exist). What
do you see there?
/Library/InputManagers/
~/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/Mail/Bundles/
None of the above folders exist.
In the user's ~/Library/Mail/ folder (the user with the problems), she has:
DefaultCounts
Envelope Index
LSMMap2
MessageRules.plist
MessageRules.plist.backup
OpenedAttachments.plist
SmartMailboxes.plist
and the following folders:
Mailboxes
[email protected]
Signatures
The Mailboxes folder has two more folders inside:
Deleted Messages.mbox
Outbox.mbox
The POP-... folder has the following folders inside:
Deleted Messages.mbox
Drafts.mbox
INBOX.mbox
Sent Messages.mbox
and one file:
MessageUidsAlreadyDownloaded2
Incidentally, I now have 9 copies of the same email in my inbox and 7 copies of another. They are multiplying like rabbits!
Thanks for your help so far.
17" iMac (intel) Mac OS X (10.4.8)

Multiple problems with PSE10 Organizer

I have Photoshop Elements 10 that I am using with Windows XP with Service Pack 3, a Pentium 4 CPU with 3 GHz, 2 GB of RAM and 48.6 GB of free disk space. I have had multiple problems with Organizer since I started using it.
When I first got PSE10, I imported 8 years of my photos into one catalog in Organizer. I'm not sure how many images were included in this catalog but from what I've read, there's no limit to the number of images that can be placed in a catalog.
Question: Is there any limit to the number of images that can be put into one catalog?
Catalog A
Problem 1) People recognition didn't work. When I tried to find people for tagging, the feature didn't work. After researching the problem online, I found that others who had the same problem solved it by rebuilding the catalog a few hundred images at a time. I deleted the original catalog with all of my images and created a new catalog with just 800 images from this year. Then, people recognition worked, and I was able to tag people. The only other feature that I have used in Catalog A is that I have edited a few images to improve exposure. I have not rated images, stacked them, renamed them or created albums. With this catalog, the Organizer and the Editor still work together so when I select a photo in Organizer to fix, the Editor opens up with the photo for editing like it is supposed to do.
Catalog B
I created another catalog that had about 900 different images from a European tour. I deleted some of those images so there are now 760 images in this catalog. At first, all the Organizer features seemed to work fine in this catalog. I was able to pull photos from Organizer to fix in the Editor. I rated all the images, stacked and renamed some photos and created several albums under an album category.
Problem 2) A couple of days ago, the Organizer and the Editor stopped working together. Now, when I select a photo in Organizer and click on Fix, Edit, the Editor window comes up but the photo does not appear in Editor. The only way I can get an image into Editor is to pull it directly into Editor. Then, when I want to save it as a Version Set I have to choose File> Organize Open File in order to save the image as a version set.
Question: How do I get the Organizer & Editor to work together again?
Problem 3) The Exif data has disappeared on quite a few of the images in Catalog B even though the Complete radio button is highlighted under the Properties panel. Some of those images were never edited or re-saved.
Question: How do I get the Exif data back into Properties.
Problem 4) Yellow question marks continue to appear on the top left of some images even though these images have not been moved. The Organizer searches for the "missing file" and finds it quickly but why is it "missing"? I have gone through the albums in this catalog, completed the missing file searches on all the images so that no yellow question marks appear and when I go back to the catalog the next time I find the yellow question marks are there again!
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Problem 5) When I re-opened Catalog A with the general 2012 images, I got a message that my watched folder had new photos to import. When I clicked on ok, the next window brought up 3 photos that were already in Catalog B of my European tour that were taken in September. Somehow, the Date Created and the Dated modified had been changed from 9/12 to 11/12 so the Organizer thought they were new images when they were not.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Both Catalogs
All of the images in both catalogs show creation dates that are later than the date modified, (example: date created of 6/12 and a date modified of 3/12).
Question: How is it possible that the date created is later than the date modified?

Hey Paysonite,
A lot of questions hmm!!! Let me try to answer few of them.
Question: Is there any limit to the number of images that can be put into one catalog?
Ans: No, you can import as many images in catalog you want. Just to add, as the size of catalog grows, Organizer's perfromance will be affected.
Question: Why does Organizer think the files are missing? Why isn't the file location remaining the same?
Ans: As you mentioned in your comments, you have deleted some files (i assume from explorer). But these deleted files are still present in Organizer. Since the deletion happened outside the organizer, so Organizer is unaware of the deletion. So when organizer tries to read the files (which were deleted), Organizer is unable to find then and thus thinks that files are missing.
Questions: Shouldn't the Date Created remain constant? The Date Created does not seem to represent the date the picture was taken, so what does that date represent? How can I keep the date created from being changed?
Ans: Date created represents the date on which the files was created on your files system (or into OS). It is not date when the images was shot (actual shot date is Date time Original in Organizer).
Question: How is it possible that the date created is later than the date modified?
Ans: A simple way to do it is-Suppose you have an image which was brought/copied on July (i am explaining this with the help of month only. Assume date to be 1st and year to 2012). Now change the system date to August. Edit this image in Editor (without creating a version set for easy illustration). Now date created is July and date modified is Aug.
Copy this fine on flash drive/pen drive. Delete the original file from windows. Change the system date to Sept. Now copy the file in windows and see its properties. It has Date created as Sept and date modified as Aug, which answers you question.
I am unable to fully understand your remaining questions. Please elaborate.
Also please let me know if you need more info with above answers.
~Andromeda

Multiple Problems with Toshiba Satellite A505-S6980 laptop??

Hi,
We purchased the Toshiba Satellite A505-S6980 laptop at Best Buy about a week ago. However, we seem to be having multiple problems with it, that I wouldn't have expected from a brand new Toshiba.
Problems:
Whenever I'm in Mozilla Firefox browser, it crashes 90% of the time. Firefox was always my favorite on our previous computer, and still is, I just can't use it because it continually crashes.
In Outlook, whenever I try to open a message or reply, or basically any general command, it pops up an error message that says, "Could not install the custom actions," and then does whatever I'd wanted it too. It's a pain, as we do a lot of email and calendar through Outlook.
In Outlook, when I tried to import our Contacts, it says that we do not have the appropriate permissions to access the files. We are the only user account on this computer. We don't do seperate ones for each family member; we just turn on the PC.
It seems to me like the internet crawls on this computer. Every time we try to play a video (e.g. ABC, CNN, Youtube), it won't buffer. It just stops and starts all throughout the video about every 3 seconds. HUGE nuisance. We watch a lot of videos.
Minor issue: In Firefox, before it has crashed that is, on my old computer I used to be able to type "cnet" without the quotes into the address bar, and it would take me to www.cnet.com. If it couldn't find the page, it would take me to my default search engine's page (Yahoo) with the search results. On this one, if I type anything into the address bar (like search terms/keywords) it bring up search results with a My Start Incredimail search engine. I want my Yahoo search engine, and I want it to find the page if it can.
I cannot seem to get the Aero Flick (I think) to work. That was one of the main things I was looking forward to, but I can't figure out how to do it.
It seems to me like the Windows Explorer freezes a lot.
There have been multiple times when I'm typing that the keys don't work. Like I would have to press the A key about 10 times to get it to show up on the screen once. It's hit and miss and doesn't do it all of the time.
This isn't a problem - just a question. Is it best to leave the computer plugged in all of the time if it's stationary? Or once it's fully charged, should I unplug it and let the power run down, and then re-charge it?
**CLARIFICATION: It's not Outlook Express, it's Microsoft Office Outlook 2007. The one that you have to pay for. Surely it works with 7, considering it's Microsoft?!?!
If you can help me answer any of these problems/questions, I would really appreciate it.
Have a safe and Merry Christmas!

Yes, everything was fine with Firefox. However, I have uninstalled it, and am just using Internet Explorer for now.
Thanks for battery info...
I'm well within the return window, but overall really like the laptop. I've put a lot of time into it, and just want it to work right if possible.
Thanks for the info.
ScottinFla wrote:Concerning Firefox, have you checked your add-on list for any faulty plug-ins or extensions? Try disabling them and see what happens. Also, that search engine you mentioned may have somehow been installed on your machine. Have you checked the "Manage search engines..." window available from the search bar? Check your add-ons as well. You could always reinstall Firefox from scratch.
As for the battery, it may not be best to continually run down the battery - followed by a long charge. Once a month or so should be fine. Otherwise, just try to give the battery some exercise every now and then.
Are you still within the return window? Your unit may have a bad install, some bad RAM, or...
I have the same model and it works just fine.

Problem with installing Photoshop elements 9 and adobe support advisor

Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
cpsid_82829s5 Missing installation file bootstrapper error occured
with this code for a support from adobe 00-67325-032018052012
I unistalled it and retried, but nothing.
Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
Thank you

In the error message it doesn't tell me
"Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
Messaggio originale----
Da: [email protected]
Data: 18/05/2012 22.20
A: "Questionlady"<[email protected]>
Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor? If so can you please list each step and the result of those steps. This will allow us to best advise you on your next steps.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with a nokia 5310 xpress and a bluetooth

i have problem with a nokia 5310 xpress and a bluetooth!i can transfer anything from my phone to pc with or without pc suite! but when i want to transfer files from pc to phone i doesen"t work! with pcsuite soethings work but very slow! i want to transfer files witout pcsuite !
the blue tooth adapter it is dongle and it the software that i use is BlueSoleil 2.6.08
CAn anyone help me?

I'm having bigger problems...
the screen goes all white and off after a lil while....
Not even the vendor could do anything....

Intermittent problem with PC Suite - no text is di...

I have an intermittent problem with PC Suite - every so often it will stop displaying any text.
For eaxmple, right-click on the task bar icon gives a list of icons for backup, messages, sync etc., but the text is missing. Also, the 'tool-tips' in the application itself are empty grey boxes.
Restarting PC Suite solves the problem for a while, but it always comes back.
The main problem is that when it gets in this state, incoming call alerts don't show the name/number.
Has anyone else had this and managed to sort it.
I'm running PC Suite 7.1.40.6 on a Lenovo ThinkPad T61p running Windows XP SP3. The phone is a 6230i connected via Bluetooth.
Thanks.
Alan.

Yes the Support line directed me to try a different USB port, with no luck.
Also looked for the connection in windows device manager>>nothing appeared except the computers ports...
[quote]Hi, Here is something what you could try to do: 1. Uinstall Nokia PC Suite 6.82.22 (or 6.7 or 6.8x) and restart PC. 2. Go to Windows' Control Panel and open "Add or Remove Programs" application. 3. If there are "PC Connectivity Solution" (or "Nokia PC Connectivity Solution" and/or "Nokia Connectivity Cable driver", uninstall those and restart PC. 4. Install PC Suite 6.82.22 and restart PC. If problem happen again: 1. Go to Windows' Control Panel and open "Add or Remove Programs" application. 3. Select "PC Connectivity Solution", click "Change" and then "Repair". 4. After Repair, restart PC. And if no help again: Save RegPCSuiteComponents.bat file to C:\Program Files\PC Connectivity Solution\ folder. Then go that folder and run it (double-click that file). After that restart PC. Does any of those help you?? [/quote]
I've tried your 1st & 2nd suggestions....but I can't find the "connectivity solution" folder you mention (and being a complete noob (!) I don't know what a .bat file is (nor how to use it lol)
In fact I can't find PC Suite anywhere in the program files. I REALLY think that it wasn't installed OK....it should not have taken less than one second to download if it took 1 3/4 hrs initially

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

Contact iTunes Store Support.

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Multiple problems with PC Suite 6.80 and bluetooth

Similar Messages

Maybe you are looking for