Multiple reports on one page; loading in background

Hey everybody,
i have a lot of reports on one page so that it takes a long time to load this page. Is there any possibility to just load one or two reports and the rest after the first report is shown or that the reports are loaded in the background?
thx to everybody,
dt

dt,
Interesting question... It is possible. Get started by looking over Karl's example of a report pull via Ajax here:
http://apex.oracle.com/pls/otn/f?p=11933:48
You would just set the code to pull the reports onload without jQuery or when ready with jQuery.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
You can reward this reply by marking it as either Helpful or Correct ;-)

Similar Messages

  • Multiple ALV reports on one page

    How to display multiple ALV reports on one page.

    this done by this code....
    *& Report  ZPR_02
    REPORT  ZPR_02.
    TYPE-POOLS: SLIS.
    Tables Declaration.
    TABLES: MARA.
    *Internal tables and data declaration.
    DATA: BEGIN OF IT_MARA OCCURS 0,
            MATNR LIKE MARA-MATNR,
            MTART LIKE MARA-MTART,
            MBRSH LIKE MARA-MBRSH,
          END OF IT_MARA,
          BEGIN OF IT_MARC OCCURS 0,
            MATNR LIKE MARC-MATNR,
            WERKS LIKE MARC-WERKS,
            EKGRP LIKE MARC-EKGRP,
          END OF IT_MARC,
          BEGIN OF IT_MARD OCCURS 0,
            MATNR LIKE MARD-MATNR,
            WERKS LIKE MARD-WERKS,
            LGORT LIKE MARD-LGORT,
            LABST LIKE MARD-LABST,
          END OF IT_MARD.
    DATA: WA_FIELD_CAT TYPE SLIS_FIELDCAT_ALV,
          IT_FIELD_CAT1 TYPE SLIS_T_FIELDCAT_ALV,
          IT_FIELD_CAT2 TYPE SLIS_T_FIELDCAT_ALV,
          IT_FIELD_CAT3 TYPE SLIS_T_FIELDCAT_ALV,
          WA_KEYINFO TYPE SLIS_KEYINFO_ALV,
          IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
          IT_EVENTS1    TYPE SLIS_T_EVENT WITH HEADER LINE,
          IT_EVENTS2    TYPE SLIS_T_EVENT WITH HEADER LINE,
          IT_EVENTS3    TYPE SLIS_T_EVENT WITH HEADER LINE.
    *Selection Screen.
    SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
    *Start Of selection.
    START-OF-SELECTION.
    *Selecting the data.
      PERFORM SELECT_DATA.
    *Populating the field catelogue.
      PERFORM BUILD_FIELD_CAT.
    *Displaying the final output.
      PERFORM DISPLY_OUTPUT.
    *&      Form  Select_data
          Selecting the data.
    FORM SELECT_DATA .
      SELECT MATNR
             MTART
             MBRSH FROM MARA
           INTO TABLE IT_MARA
           WHERE MATNR IN S_MATNR.
      IF NOT IT_MARA[] IS INITIAL.
        SELECT MATNR
               WERKS
               EKGRP FROM MARC
             INTO TABLE IT_MARC
             FOR ALL ENTRIES IN IT_MARA
             WHERE MATNR EQ IT_MARA-MATNR.
      ENDIF.
      IF NOT IT_MARC[] IS INITIAL.
        SELECT MATNR
               WERKS
               LGORT
               LABST FROM MARD
             INTO TABLE IT_MARD
             FOR ALL ENTRIES IN IT_MARC
             WHERE MATNR = IT_MARC-MATNR
             AND   WERKS = IT_MARC-WERKS.
      ENDIF.
    ENDFORM.                    " Select_data
    *&      Form  Build_field_cat
         Populating the field catelogue.
    FORM BUILD_FIELD_CAT .
      DEFINE M_FIELDCAT1.
        WA_FIELD_CAT-TABNAME = &1.
        WA_FIELD_CAT-FIELDNAME = &2.
        WA_FIELD_CAT-SELTEXT_L = &3.
        APPEND WA_FIELD_CAT TO IT_FIELD_CAT1.
      END-OF-DEFINITION.
      DEFINE M_FIELDCAT2.
        WA_FIELD_CAT-TABNAME = &1.
        WA_FIELD_CAT-FIELDNAME = &2.
        WA_FIELD_CAT-SELTEXT_L = &3.
        APPEND WA_FIELD_CAT TO IT_FIELD_CAT2.
      END-OF-DEFINITION.
      DEFINE M_FIELDCAT3.
        WA_FIELD_CAT-TABNAME = &1.
        WA_FIELD_CAT-FIELDNAME = &2.
        WA_FIELD_CAT-SELTEXT_L = &3.
        APPEND WA_FIELD_CAT TO IT_FIELD_CAT3.
      END-OF-DEFINITION.
      M_FIELDCAT1 'MARA' 'MATNR' 'Material No'.
      M_FIELDCAT1 'MARA' 'MTART' 'Material type'.
      M_FIELDCAT1 'MARA' 'MBRSH' 'Industry Sector'.
      M_FIELDCAT2 'MARC' 'MATNR' 'Material No'.
      M_FIELDCAT2 'MARC' 'WERKS' 'Plant'.
      M_FIELDCAT2 'MARC' 'EKGRP' 'Purchasing Group'.
      M_FIELDCAT3 'MARD' 'MATNR' 'Material No'.
      M_FIELDCAT3 'MARD' 'WERKS' 'Plant'.
      M_FIELDCAT3 'MARD' 'LGORT' 'Storage Loc'.
      M_FIELDCAT3 'MARD' 'LABST' 'Valued Stock'.
      IT_EVENTS1-NAME  =  'TOP_OF_PAGE'.
      IT_EVENTS1-FORM  =  'F_TOP_OF_PAGE_ONE'.
      APPEND IT_EVENTS1.
      CLEAR IT_EVENTS1.
      IT_EVENTS2-NAME  =  'TOP_OF_PAGE'.
      IT_EVENTS2-FORM  =  'F_TOP_OF_PAGE_TWO'.
      APPEND IT_EVENTS2.
      CLEAR IT_EVENTS2.
      IT_EVENTS3-NAME  =  'TOP_OF_PAGE'.
      IT_EVENTS3-FORM  =  'F_TOP_OF_PAGE_THREE'.
      APPEND IT_EVENTS3.
      CLEAR IT_EVENTS3.
    ENDFORM.                    " Build_field_cat
    *&      Form  disply_output
         Displaying the final output.
    FORM DISPLY_OUTPUT .
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
        EXPORTING
          I_CALLBACK_PROGRAM = SY-REPID.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
        EXPORTING
          IS_LAYOUT                        = IT_LAYOUT
          IT_FIELDCAT                      = IT_FIELD_CAT1[]
          I_TABNAME                        = 'IT_MARA'
          IT_EVENTS                        = IT_EVENTS1[]
      IT_SORT                          = IT_SORT
      I_TEXT                           = ' '
        TABLES
          T_OUTTAB                         = IT_MARA     .
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
        EXPORTING
          IS_LAYOUT                        = IT_LAYOUT
          IT_FIELDCAT                      = IT_FIELD_CAT2[]
          I_TABNAME                        = 'IT_MARC'
          IT_EVENTS                        = IT_EVENTS2[]
      IT_SORT                          = IT_SORT
      I_TEXT                           = ' '
        TABLES
          T_OUTTAB                         = IT_MARC    .
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
        EXPORTING
          IS_LAYOUT                        = IT_LAYOUT
          IT_FIELDCAT                      = IT_FIELD_CAT3[]
          I_TABNAME                        = 'IT_MARD'
          IT_EVENTS                        = IT_EVENTS3[]
      IT_SORT                          = IT_SORT
      I_TEXT                           = ' '
        TABLES
          T_OUTTAB                         = IT_MARD    .
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK             = ' '
      IS_PRINT                      = IS_PRINT
      I_SCREEN_START_COLUMN         = 0
      I_SCREEN_START_LINE           = 0
      I_SCREEN_END_COLUMN           = 0
      I_SCREEN_END_LINE             = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER       = E_EXIT_CAUSED_BY_CALLER
      ES_EXIT_CAUSED_BY_USER        = ES_EXIT_CAUSED_BY_USER
    EXCEPTIONS
      PROGRAM_ERROR                 = 1
      OTHERS                        = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " disply_output
    *&      Form  top_of_page_one
          text
    FORM F_TOP_OF_PAGE_ONE.
      WRITE: / 'Header details (MARA)'.
    ENDFORM.                    "top_of_page_one
    *&      Form  top_of_page_one
          text
    FORM F_TOP_OF_PAGE_TWO.
      WRITE: / 'Item details (MARC)'.
    ENDFORM.                    "top_of_page_one
    *&      Form  top_of_page_one
          text
    FORM F_TOP_OF_PAGE_THREE.
      WRITE: / 'Item details (MARD)'.
    ENDFORM.                    "top_of_page_one
    regards,
    venkat.

  • Multiple Reports inside one Single Report

    Post Author: maximus85
    CA Forum: Crystal Reports
    Hi....I'm having this problem of having multiple reports inside one single report. Basically what i wanted to built is a Dashboard that contains 4 main subjects:i)Sales   -    Contains graph that can be drill down for further detailsii)Internal Process   -  Contains tables that can be drill downiii)Profit/Lossiv)HRAs far as i know, since all four are of different fact table data, they cannot be all thrown inside one single report to be built on. So i came out with using subreports instead for each components and then finally putting them all together as subreport inside the main report(Dashboard).However, i just realized that by doing that, whenever i clicked on the reports that i wanted to drill down with, it will prompt that particular report that i clicked into a new page, and then from there only i can perform drill down.Is there anyway to enable me to straight away drill down the Sales and Internal Process reports from the main reports(Dashboard) instead of having to click twice as that will be unnecessary right?Or mayb if there's another better ways to do what I have to do? Please do advise and suggest......Thanks alot.......

    hi chack,
    doesnt matter or preferrably both, as long as i can export all the reports in 1 page into 1 excel, or 1 pdf.

  • Download multiple reports in one hit

    I am just wondering if there anyway to have apex to download multiple reports with one button?
    The normal way I deal with reports is create the query within shared components, and then create a button on a page that links to the print URL of the report. What I am wondering if there is anyway to have a button that will download all reports in one go?
    Thanks for help in advance,
    Trent

    Trent,
    Let's say you have two Report Queries, Employee and Department then if you want them to download with single button click
    Set button target as URL
    In URL section
    javascript:download_reports();In page HTML Header
    <script type="text/javascript">
    function download_reports()
    window.open('f?p='+'&APP_ID.'+':0:'+'&SESSION.'+':PRINT_REPORT=Employee');
    window.open('f?p='+'&APP_ID.'+':0:'+'&SESSION.'+':PRINT_REPORT=Department');
    </script>Regards,
    Hari

  • More than one updatable report on one page.

    I hope someone can help me with this.
    I've spend a long time looking for the best way to do this but keep running into APEX constraints.
    My problem is that I have two tables;
    1) an 'object' table with static attributes (that can change value but keep no history).
    2) an 'object attributes' table with attributes that can change over time (i.e. keep a history).
    Some of the attributes are optional and some mandatory irrespective of whether they are static or timestamped.
    I want to design a screen that shows both tables on one page - preferably both updatable on the same screen.
    Selecting/clicking a row in the top table (object) will select the appropriate object attribute rows in the table below (I've got that covered - no help needed there).
    If I create a new object record I also need to create an initial object attributes record.
    This first initial attributes record cannot be deleted while the object exists.
    The start date of the object itself and its first object attributes record should remain in sync.
    I cannot separate the object table and attributes tables on different pages as all static and timestamped attributes form one collection that needs to be visible and maintainable from one screen.
    The problem is APEX will not allow more than one updatable (or interactive) report on one page.
    I need a solution where both tables are maintained in a uniform way for the user.
    Not, for instance, one table an updatable report and the other a report with detail form.
    Anybody struggle with a similar problem and found a solution to this problem?
    Any pointers are most welcome.
    Ruud.
    PS. I have a joined view on both tables with an INSTEAD trigger that can process insert/update/delete's on the combined data however I would not like to use that if I can avoid it. It would mean a repetition of static attributes in the one updatable report.

    Andy,
    Apologies for the late reply - Forums have been out for a while :-(
    Thanks for the suggestion. I've had a look at Denes' example and
    at least now I know it is possible.
    I've asked for access to his workspace but have not been given that
    yet so can't look at the details yet but I can make some educated
    guesses as to how it was done.
    I will give it a try.
    I'm still not certain whether having 2 updatable tabular reports is the
    right way to go though....
    Currently I'm working on a page with 2 navigator reports - one for selecting
    the object and another to select the start date of the timestamped attributes.
    Next to that I have an updatable detail form that shows the selected object
    and attributes as one whole set using the joined view I mentioned earlier.
    Inserts, updates & deletes are then done in the form.
    Ruud.

  • IBooks Author: in exported file, one page loads very slowly...

    iBooks Author: in exported file, one page loads very slowly and drags when scrolling through pages, almost stopping the scroll.  I have never seen this problem before with photo pages.  Normally they scroll just as smoothly as text pages.
    I have tried rebuilding the page with more compressed files to no avail.  The image files used on the page are not any bigger than others I have used previously without any problem.
    I have tried restarting my iBook.
    I am using a template that I have modified quite a bit.  The templates currently offered by Apple and third parties are not even close to what I am looking for in terms of layout, so I have to rip almost everything out of the page and start with a blank page, most of the time.  I tried modyfying the layouts to save time and then saved as a new template.  Apple really needs to add a module to create your own template at the beginning of a project.  Or they need to create one very open template, without much on the pages.

    I finally solved the problem by using an unmodified template. I would still like to know how my modifications to the other template caused the problem, but for now it remains a mystery.  Thanks for your ideas.
    Next I will try modifying the template without saving it as a template (merely saving it as a file) to see if I can get away with my modifications.  Also I will make fewer modifications.
    Slowly but surely I am learning this program by trial and error.  Each time I try a few formatting variations, output an iBooks file, and open it on my iPad.  I have probably done 20 of these tests, so far.  Once I work out every detail of the design and structure, I will build the final book.  I am lucky to have a beautiful PDF of the hardcover version, generously provided by my publisher.  This not only sets a high bar for me, but also allows me to use some of their design elements via screen capture.
    iBooks Author has great potential, but I along way to go to get there. One feature I would really like to see in the next update: the ability to add a hidden caption to a photo.  The reader would tap the image and the caption would appear. Tap again and it disappears.

  • Matrix report in one page

    hello dear,
    i have a matrix report with three frames with the directions:
    1-down
    2-acroos
    3-down
    the problem is that the 2nd frame expanded so some data goes to another pages
    i want to show whole report in one page only.
    please guide me
    thanks

    There isn't any way to do this. Reports breaks up across page boundaries and doesn't continue attempting to fit another part of the matrix on the same page.

  • Add to Multiple Tables from One Page

    Hello,
    I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
    ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
         Error      Unable to process row of table IDD_ID_DATA.
    So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
    So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
    I am new to APEX so any help would be greatly appreciated!

    UPDATE:
    I received an email from the APEX Support Team:
    "The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
    In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
    I have been playing around with PL/SQL code and the end result is this:
    begin
         INSERT INTO table1
         VALUES(
              :P2_Item_Field1,
              :P2_Item_Field2);
         INSERT INTO table2
         VALUES(
              :P2_Item_Field1,
              :P2_Item_Field2);
    end;
    I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

  • I need an idea how to place multiple videos on one page

    Multiple videos on one page in Muse neded for a video portfolio..
    Anyone got a great idea how this can be done please. (or direct me to a tutorial link - doing one is all I can find)
    I am happy with either embedded or Menu linked on objects to videos.
    Youtube is hosting the videos
    I just cant find any way to put hyperlinks or urls in objects and I can not find a way to make small video players in Muse.
    If I scale the container ..things go very weird. eg the video goes tiny and into a corner.
    I feel like I am working with half a tool box!!!
    I cant even find a template where this has been done.
    Any help is appreciated. Thanx.

    That works perfectly thank you.
    Now I am wondering if I can have a single "viewer" that will play any selected video from a button , a menu or other trigger?
    Info for others if required. :  The You tube ID required in the widget setting is not the URL.  Its an alpha/numeric obtained from part of the YT embedding code.
    example - the bold underlined section
    <iframe width="720" height="405" src="//www.youtube.com/embed/w6ZcCOCihuY" frameborder="0" allowfullscreen></iframe>

  • Printing multiple photos onto one page

    Sorry, fairly new to PSE9!
    Have a group of photos I need to print to actual size (3cm x 4cm) to go into a photo frame.  They are all cropped and ready to go but there doesn't seem to be an option to print multiple images onto one page at a custom size?  A contact sheet only gives me the option for the number of columns and picture package doesn't give any such option either as far as I can see!  I'm sure I must be missing something here!
    Any help much appreciated!  Don't want to waste photo paper printing each small photo individually!

    http://www.elementsvillage.com/forums/showthread.php?p=206785#post206785
    Post #6 in this thread provides standard directions.

  • Update multiple records on one page php/mysql

    Hi folks,
    I am trying to adapt a page to offer the option to update multiple records on one page.
    The intention is to edit FAQ categories which are contained in a table with just two fields - the category and an id.
    The page lists each categories in a form with a submit button which is then repeated for each record in the recordset.
    Unfortunately my plan didn't work and only the first record updates as intended.
    Can anyone suggest how I can make it work?
    Here's the code I have so far.
    ************** The Update Code *****************
    $editFormAction = $_SERVER['PHP_SELF'];
    if (isset($_SERVER['QUERY_STRING'])) {
      $editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
    if (!isset($mm_abort_edit) || !$mm_abort_edit) {
    if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
      $updateSQL = sprintf("UPDATE faq_categories SET category=%s WHERE id=%s",
                           GetSQLValueString($_POST['category'], "text"),
                           GetSQLValueString($_POST['id'], "int"));
      mysql_select_db($database_con_mysite, $con_mysite);
      $Result1 = mysql_query($updateSQL, $con_mysite) or die(mysql_error());
      $updateGoTo = "faq-category-edit.php
      if (isset($_SERVER['QUERY_STRING'])) {
        $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
        $updateGoTo .= $_SERVER['QUERY_STRING'];
      header(sprintf("Location: %s", $updateGoTo));
    ************** Update Code Ends *****************
    ************** The Form *****************
    <form name="frm_editcategory" id="frm_editcategory" method="POST" action="<?php echo $editFormAction; ?>">
      <?php do { ?>
    <fieldset>
              <input name="id" type="hidden" value="<?php echo $row_rs_faqcategory['id']; ?>" />
              <input name="category" type="text" class="formrightcolumn"  value="<?php echo $row_rs_faqcategory['category']; ?>" />
              <input name="save" type="submit" class="submitbutton" id="save" value="save" />
    </fieldset>
              <input type="hidden" name="MM_update" value="form1" />
       <?php } while ($row_rs_faqcategory = mysql_fetch_assoc($rs_faqcategory)); ?>
    </form>
    ************** The Form Ends *****************
    Cheers
    Dave

    What does debugging tell you? What's the value of each of the variables? Did you try using regular echo statements to monitor what's going on? That's what I always do whenever I am stuck in my PHP coding.

  • Two tabular reports on one page

    Hello,
    I've a page with master an two different detail regions.
    For both detail regions I need a tabular form.
    The first is no problem. Because the second one cannot be created automatically by ApEx I created the region with the buttons (other names) and the processes manually.
    When I press the button "add" in the second tabular report region the empty column is added to the first tabular report region. The same problem I have with the "Delete" button.
    Is there generally no possibility to place two tabular reports on one page?
    Thanks in advance
    Regards
    Ulrike

    I have a similar need, where I would like to display two reports within different regions on the same page. Both reports would be linked to a Form, such that the desired row could be edited. If the user clicks on a row within region A then it would go to one form for editing that row, and if the user clicks on a row within region B then it would go to a seperate Form for editing.
    I wondered if I could use two "Forms with Reports" and then create a third page that references these to pages through an I-Frame. Hopefully, when I clicked on a row within the I-FRAME everything would navigate to the proper form with the proper row. Is this feasible, or is there a better approach that I should consider?

  • Two Updateable Reports On One Page

    I have 2 updateable reports on one page and two update procedures (one for each report)
    Each procedure is linked to a different button and calls a different procedure in the database
    My question is how to tell the page procedure, which report it should look at ?
    Gus

    My twp page processes are
    Process 1
    DECLARE
       v_Row number;
    v_upd number;
      v_count_failed     number := 0;
      v_count_updated    number := 0;
      v_count_failed2    number := 0;
      v_count_updated2   number := 0;
      v_count_total      number := 0;
    BEGIN
       FOR i IN 1 .. apex_application.g_f02.COUNT
       LOOP
         p_vrpapx.pr_p_upd_correlation (
            apex_application.g_f04 (i), --p_geokey
            apex_application.g_f08 (i), --p_PRIMARYMATKEY
            apex_application.g_f03 (i), --p_DEPMATKEY
            apex_application.g_f16 (i), --p_PROMOKEY
            --to_date(apex_application.g_f11 (i),'DD.MM.YYYY'), --p_STATCALCDAY
            apex_application.g_f11 (i),
            apex_application.g_f06 (i), --p_DOBJECTID
            apex_application.g_f05 (i), --p_POBJECTID
            apex_application.g_f17 (i), --p_USERCORFACTOR
            apex_application.g_fcs (i), --checksum
            v_count_failed,
            v_count_updated
        v_count_total := v_count_total + 1;
        v_count_failed2 := v_count_failed2 + v_count_failed;
        v_count_updated2 := v_count_updated2 + v_count_updated;
        if not apex_application.g_f16 (i) ='ALL'
          then
          v_upd:=p_vrpapx.fn_3_p_update_conv
          apex_application.g_f16 (i), --p_PROMOKEY
          apex_application.g_f08 (i), --p_PRIMARYMATKEY
          apex_application.g_f03 (i), --p_DEPMATKEY :P3_OM,
          apex_application.g_f04 (i), --p_geokey :F140_GEOKEY,
          nvl(apex_application.g_f17 (i),to_number(apex_application.g_f12 (i))), --p_USERCORFACTOR --corfactor
          :F140_PLNO, --pi_plno
          apex_application.g_f15 (i) --primaryscale
        end if;
        --reset variables
        v_count_failed  := 0;
        v_count_updated   := 0;
      end loop;
      :P3_COUNT_FAILED := v_count_failed2;
      :P3_COUNT_UPDATED := v_count_updated2;
    END;Process 2
    DECLARE
      v_count_failed     number := 0;
      v_count_updated    number := 0;
      v_count_failed2    number := 0;
      v_count_updated2   number := 0;
      v_count_total      number := 0;
    BEGIN
       FOR i IN 1 .. apex_application.g_f02.COUNT
       LOOP
         p_vrpapx.pr_3_p_upd_forcast(
            apex_application.g_f04 (i), --p_clocid
            apex_application.g_f05 (i), --p_siid
            apex_application.g_f06 (i), --p_clocfcstversionid
            apex_application.g_f07 (i), --p_clocfcstcalid
            --to_number(apex_application.g_f12 (i)), --p_qtyuser
           -- nvl(apex_application.g_f12 (i), 0), --p_qtyuser
            apex_application.g_f12 (i), --p_qtyuser
           apex_application.g_fcs (i), --p_checksum
            v_count_failed,
            v_count_updated     
        v_count_total := v_count_total + 1;
        v_count_failed2 := v_count_failed2 + v_count_failed;
        v_count_updated2 := v_count_updated2 + v_count_updated;
        --reset variables
        v_count_failed  := 0;
        v_count_updated   := 0;
      end loop;
      :P3_COUNT_FAILED_FORECAST  := v_count_failed2;
      :P3_COUNT_UPDATED_FORECAST := v_count_updated2;
    END;What I mean is that if I update a column in my first report and click update (button linked to process 1).
    How to link the code from process 1 so it uses report 1.
    Gus

  • Print multiple photos on one page to printer

    I am new to macs, and I can't figure out (using iphoto 11) how to just print multiple photos on one piece of 8 1/2 X 11 paper in my own printer at home. I want to choose the size of each picture (like one 4X6 and two wallets on one page. How do I do this? it seems I can only print one pic per page when I use the print function in iphoto. Please help! If i can't do this basic thing I feel like I just wasted a couple thousand dollars on a really expensive piece of junk.

    This is a detailed set of instructions I made for my mother to use. Hope it helps.
    To print single or multiple photos in iPhoto
    Open iPhoto
    If photo(s) are not already in iPhoto then dragand drop into iPhoto
    Locate photo(s)
    Select (highlight) photo(s)
    Click File
    Click Print
    New window pops up
    Select border type on left side (standard, etc.)
    Select Print Size at bottom right (2x3, 3x5,etc.)
    Click Customize
    New window opens
    On bottom right are new icons
    IGNORE Print settings -are the options you chose in steps 7a, b & c
    IGNORE Themes - is thesame as step 7a
    IGNORE Background –ignore in most cases
    IGNORE Borders –default is 1 (use default in most cases)
    Layout (select 1 or 3 in most cases)
    1is horizontal photo
    IGNORE 2 is horizontal photo with text below
    3is vertical photo
    IGNORE 4 is vertical photo with text below
    SettingsClickon Photos per page
    If you want only 1 copy of each photo you selectedon each page then choose Single photo per page
    If you want 2, 3 or 4 different photos on eachpage then choose Multiple photos per page
    If you want many copies of the same photo oneach page then choose Multiple of the same photo per page
    ClickPrint on the bottom right
    Newwindow pops up
    If the arrow (triangle) to the right is pointingdown click it so it points up and displays additional options
    Choose number of copies (pages to print)
    ClickPrint

  • How to display all rows in the report in one page in Oracle APEX 3.2

    Friends -
    We are using Oracle Applications Express 3.2 on oracle database 10.2.0.5 on solaris environment.
    One of our report contains total no of rows 50000. when we ran report by default it is showing 15 and i can go search and change display no of rows to different numbers and click go.
    My question is it possible to display all 50000 rows during first time report launching without going to change rows. Is there any option that we can set how many number of rows that we can display during report design.
    Please advise
    VSH

    Hello VSH,
    >> My question is it possible to display all 50000 rows during first time report launching without going to change rows
    As vee pointed out it is possible, however the question you need to ask yourself is is it wise?
    Bear in mind that displaying 50,000 rows on a single HTML page means a lot of code that must be loaded by the client browser all at once. What it will do to your page loading time? Browser memory? Network bandwidth? Also, do you really believe that it is effective to let an end user look for a specific row among 50,000 rows?
    Regards,
    Arie.
    &diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
    &diams; Author of Oracle Application Express 3.2 – The Essentials and More

Maybe you are looking for