Two tabular reports on one page
Hello,
I've a page with master an two different detail regions.
For both detail regions I need a tabular form.
The first is no problem. Because the second one cannot be created automatically by ApEx I created the region with the buttons (other names) and the processes manually.
When I press the button "add" in the second tabular report region the empty column is added to the first tabular report region. The same problem I have with the "Delete" button.
Is there generally no possibility to place two tabular reports on one page?
Thanks in advance
Regards
Ulrike
I have a similar need, where I would like to display two reports within different regions on the same page. Both reports would be linked to a Form, such that the desired row could be edited. If the user clicks on a row within region A then it would go to one form for editing that row, and if the user clicks on a row within region B then it would go to a seperate Form for editing.
I wondered if I could use two "Forms with Reports" and then create a third page that references these to pages through an I-Frame. Hopefully, when I clicked on a row within the I-FRAME everything would navigate to the proper form with the proper row. Is this feasible, or is there a better approach that I should consider?
Similar Messages
-
Two Updateable Reports On One Page
I have 2 updateable reports on one page and two update procedures (one for each report)
Each procedure is linked to a different button and calls a different procedure in the database
My question is how to tell the page procedure, which report it should look at ?
GusMy twp page processes are
Process 1
DECLARE
v_Row number;
v_upd number;
v_count_failed number := 0;
v_count_updated number := 0;
v_count_failed2 number := 0;
v_count_updated2 number := 0;
v_count_total number := 0;
BEGIN
FOR i IN 1 .. apex_application.g_f02.COUNT
LOOP
p_vrpapx.pr_p_upd_correlation (
apex_application.g_f04 (i), --p_geokey
apex_application.g_f08 (i), --p_PRIMARYMATKEY
apex_application.g_f03 (i), --p_DEPMATKEY
apex_application.g_f16 (i), --p_PROMOKEY
--to_date(apex_application.g_f11 (i),'DD.MM.YYYY'), --p_STATCALCDAY
apex_application.g_f11 (i),
apex_application.g_f06 (i), --p_DOBJECTID
apex_application.g_f05 (i), --p_POBJECTID
apex_application.g_f17 (i), --p_USERCORFACTOR
apex_application.g_fcs (i), --checksum
v_count_failed,
v_count_updated
v_count_total := v_count_total + 1;
v_count_failed2 := v_count_failed2 + v_count_failed;
v_count_updated2 := v_count_updated2 + v_count_updated;
if not apex_application.g_f16 (i) ='ALL'
then
v_upd:=p_vrpapx.fn_3_p_update_conv
apex_application.g_f16 (i), --p_PROMOKEY
apex_application.g_f08 (i), --p_PRIMARYMATKEY
apex_application.g_f03 (i), --p_DEPMATKEY :P3_OM,
apex_application.g_f04 (i), --p_geokey :F140_GEOKEY,
nvl(apex_application.g_f17 (i),to_number(apex_application.g_f12 (i))), --p_USERCORFACTOR --corfactor
:F140_PLNO, --pi_plno
apex_application.g_f15 (i) --primaryscale
end if;
--reset variables
v_count_failed := 0;
v_count_updated := 0;
end loop;
:P3_COUNT_FAILED := v_count_failed2;
:P3_COUNT_UPDATED := v_count_updated2;
END;Process 2
DECLARE
v_count_failed number := 0;
v_count_updated number := 0;
v_count_failed2 number := 0;
v_count_updated2 number := 0;
v_count_total number := 0;
BEGIN
FOR i IN 1 .. apex_application.g_f02.COUNT
LOOP
p_vrpapx.pr_3_p_upd_forcast(
apex_application.g_f04 (i), --p_clocid
apex_application.g_f05 (i), --p_siid
apex_application.g_f06 (i), --p_clocfcstversionid
apex_application.g_f07 (i), --p_clocfcstcalid
--to_number(apex_application.g_f12 (i)), --p_qtyuser
-- nvl(apex_application.g_f12 (i), 0), --p_qtyuser
apex_application.g_f12 (i), --p_qtyuser
apex_application.g_fcs (i), --p_checksum
v_count_failed,
v_count_updated
v_count_total := v_count_total + 1;
v_count_failed2 := v_count_failed2 + v_count_failed;
v_count_updated2 := v_count_updated2 + v_count_updated;
--reset variables
v_count_failed := 0;
v_count_updated := 0;
end loop;
:P3_COUNT_FAILED_FORECAST := v_count_failed2;
:P3_COUNT_UPDATED_FORECAST := v_count_updated2;
END;What I mean is that if I update a column in my first report and click update (button linked to process 1).
How to link the code from process 1 so it uses report 1.
Gus -
More than one updatable report on one page.
I hope someone can help me with this.
I've spend a long time looking for the best way to do this but keep running into APEX constraints.
My problem is that I have two tables;
1) an 'object' table with static attributes (that can change value but keep no history).
2) an 'object attributes' table with attributes that can change over time (i.e. keep a history).
Some of the attributes are optional and some mandatory irrespective of whether they are static or timestamped.
I want to design a screen that shows both tables on one page - preferably both updatable on the same screen.
Selecting/clicking a row in the top table (object) will select the appropriate object attribute rows in the table below (I've got that covered - no help needed there).
If I create a new object record I also need to create an initial object attributes record.
This first initial attributes record cannot be deleted while the object exists.
The start date of the object itself and its first object attributes record should remain in sync.
I cannot separate the object table and attributes tables on different pages as all static and timestamped attributes form one collection that needs to be visible and maintainable from one screen.
The problem is APEX will not allow more than one updatable (or interactive) report on one page.
I need a solution where both tables are maintained in a uniform way for the user.
Not, for instance, one table an updatable report and the other a report with detail form.
Anybody struggle with a similar problem and found a solution to this problem?
Any pointers are most welcome.
Ruud.
PS. I have a joined view on both tables with an INSTEAD trigger that can process insert/update/delete's on the combined data however I would not like to use that if I can avoid it. It would mean a repetition of static attributes in the one updatable report.Andy,
Apologies for the late reply - Forums have been out for a while :-(
Thanks for the suggestion. I've had a look at Denes' example and
at least now I know it is possible.
I've asked for access to his workspace but have not been given that
yet so can't look at the details yet but I can make some educated
guesses as to how it was done.
I will give it a try.
I'm still not certain whether having 2 updatable tabular reports is the
right way to go though....
Currently I'm working on a page with 2 navigator reports - one for selecting
the object and another to select the start date of the timestamped attributes.
Next to that I have an updatable detail form that shows the selected object
and attributes as one whole set using the joined view I mentioned earlier.
Inserts, updates & deletes are then done in the form.
Ruud. -
Multiple reports on one page; loading in background
Hey everybody,
i have a lot of reports on one page so that it takes a long time to load this page. Is there any possibility to just load one or two reports and the rest after the first report is shown or that the reports are loaded in the background?
thx to everybody,
dtdt,
Interesting question... It is possible. Get started by looking over Karl's example of a report pull via Ajax here:
http://apex.oracle.com/pls/otn/f?p=11933:48
You would just set the code to pull the reports onload without jQuery or when ready with jQuery.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
You can reward this reply by marking it as either Helpful or Correct ;-) -
hello dear,
i have a matrix report with three frames with the directions:
1-down
2-acroos
3-down
the problem is that the 2nd frame expanded so some data goes to another pages
i want to show whole report in one page only.
please guide me
thanksThere isn't any way to do this. Reports breaks up across page boundaries and doesn't continue attempting to fit another part of the matrix on the same page.
-
Can we add more than one interative report in one page
Hi all,
Can i add two interactive reports in one report region.
RegardsHi Raoul,
I want it because of this thread of mine
Changing report dynamically
If i get solution for the above mentioned thread of mine then i wont have to use two interactive report
well my Apex version is Application Express 3.1.2.00.02
can i use two interactive report in this? I want the condional only. I mean one at one time.
Regards -
Is it possible to combine two pivot report into one ?..
Is it possible to combine two pivot report into one ?..
Then trying to display a chart or table result.Thanks for the reply.
Let me explain it briefly. I am creating a Report 1 based on one fitler condition and second report is created based on second filter condition.
I have similar column (time periods) in the both report. Then measure column has to combine and show as single report.
This is my requirement. -
Hello Gurus,
I have a pre-printed stationary that has two same sections in one page with a space in between.
I did develop a template having one section on it.
On the pre-printed form the first section data appears fine but the second section starts immediately and so they shift above.
If I use a little space on template before the group ends it works fine for the first page but the second page starts with that extra space i used.
how to get this solved.
Thanks,
sguptaHi Gupta,
I have the same issue. I have a check template where I am printing two sections in the same page. AP check template where the invoice part and the check part are duplicated which means i will have the invoice-check(copy) and then invoice-check(original) in the same template. but the limiting lines per page doesnt work in this template. the copy part keeps on printing until it finishes since i did not mention page break after it, as there is original part below it.
Any other workaround options. so we cannot have a duplicate and original of the invoice & check in the same template and control the no of lines printed for each section.
Thanks -
Multiple ALV reports on one page
How to display multiple ALV reports on one page.
this done by this code....
*& Report ZPR_02
REPORT ZPR_02.
TYPE-POOLS: SLIS.
Tables Declaration.
TABLES: MARA.
*Internal tables and data declaration.
DATA: BEGIN OF IT_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
END OF IT_MARA,
BEGIN OF IT_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
EKGRP LIKE MARC-EKGRP,
END OF IT_MARC,
BEGIN OF IT_MARD OCCURS 0,
MATNR LIKE MARD-MATNR,
WERKS LIKE MARD-WERKS,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
END OF IT_MARD.
DATA: WA_FIELD_CAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELD_CAT1 TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELD_CAT2 TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELD_CAT3 TYPE SLIS_T_FIELDCAT_ALV,
WA_KEYINFO TYPE SLIS_KEYINFO_ALV,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS1 TYPE SLIS_T_EVENT WITH HEADER LINE,
IT_EVENTS2 TYPE SLIS_T_EVENT WITH HEADER LINE,
IT_EVENTS3 TYPE SLIS_T_EVENT WITH HEADER LINE.
*Selection Screen.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
*Start Of selection.
START-OF-SELECTION.
*Selecting the data.
PERFORM SELECT_DATA.
*Populating the field catelogue.
PERFORM BUILD_FIELD_CAT.
*Displaying the final output.
PERFORM DISPLY_OUTPUT.
*& Form Select_data
Selecting the data.
FORM SELECT_DATA .
SELECT MATNR
MTART
MBRSH FROM MARA
INTO TABLE IT_MARA
WHERE MATNR IN S_MATNR.
IF NOT IT_MARA[] IS INITIAL.
SELECT MATNR
WERKS
EKGRP FROM MARC
INTO TABLE IT_MARC
FOR ALL ENTRIES IN IT_MARA
WHERE MATNR EQ IT_MARA-MATNR.
ENDIF.
IF NOT IT_MARC[] IS INITIAL.
SELECT MATNR
WERKS
LGORT
LABST FROM MARD
INTO TABLE IT_MARD
FOR ALL ENTRIES IN IT_MARC
WHERE MATNR = IT_MARC-MATNR
AND WERKS = IT_MARC-WERKS.
ENDIF.
ENDFORM. " Select_data
*& Form Build_field_cat
Populating the field catelogue.
FORM BUILD_FIELD_CAT .
DEFINE M_FIELDCAT1.
WA_FIELD_CAT-TABNAME = &1.
WA_FIELD_CAT-FIELDNAME = &2.
WA_FIELD_CAT-SELTEXT_L = &3.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT1.
END-OF-DEFINITION.
DEFINE M_FIELDCAT2.
WA_FIELD_CAT-TABNAME = &1.
WA_FIELD_CAT-FIELDNAME = &2.
WA_FIELD_CAT-SELTEXT_L = &3.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT2.
END-OF-DEFINITION.
DEFINE M_FIELDCAT3.
WA_FIELD_CAT-TABNAME = &1.
WA_FIELD_CAT-FIELDNAME = &2.
WA_FIELD_CAT-SELTEXT_L = &3.
APPEND WA_FIELD_CAT TO IT_FIELD_CAT3.
END-OF-DEFINITION.
M_FIELDCAT1 'MARA' 'MATNR' 'Material No'.
M_FIELDCAT1 'MARA' 'MTART' 'Material type'.
M_FIELDCAT1 'MARA' 'MBRSH' 'Industry Sector'.
M_FIELDCAT2 'MARC' 'MATNR' 'Material No'.
M_FIELDCAT2 'MARC' 'WERKS' 'Plant'.
M_FIELDCAT2 'MARC' 'EKGRP' 'Purchasing Group'.
M_FIELDCAT3 'MARD' 'MATNR' 'Material No'.
M_FIELDCAT3 'MARD' 'WERKS' 'Plant'.
M_FIELDCAT3 'MARD' 'LGORT' 'Storage Loc'.
M_FIELDCAT3 'MARD' 'LABST' 'Valued Stock'.
IT_EVENTS1-NAME = 'TOP_OF_PAGE'.
IT_EVENTS1-FORM = 'F_TOP_OF_PAGE_ONE'.
APPEND IT_EVENTS1.
CLEAR IT_EVENTS1.
IT_EVENTS2-NAME = 'TOP_OF_PAGE'.
IT_EVENTS2-FORM = 'F_TOP_OF_PAGE_TWO'.
APPEND IT_EVENTS2.
CLEAR IT_EVENTS2.
IT_EVENTS3-NAME = 'TOP_OF_PAGE'.
IT_EVENTS3-FORM = 'F_TOP_OF_PAGE_THREE'.
APPEND IT_EVENTS3.
CLEAR IT_EVENTS3.
ENDFORM. " Build_field_cat
*& Form disply_output
Displaying the final output.
FORM DISPLY_OUTPUT .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELD_CAT1[]
I_TABNAME = 'IT_MARA'
IT_EVENTS = IT_EVENTS1[]
IT_SORT = IT_SORT
I_TEXT = ' '
TABLES
T_OUTTAB = IT_MARA .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELD_CAT2[]
I_TABNAME = 'IT_MARC'
IT_EVENTS = IT_EVENTS2[]
IT_SORT = IT_SORT
I_TEXT = ' '
TABLES
T_OUTTAB = IT_MARC .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELD_CAT3[]
I_TABNAME = 'IT_MARD'
IT_EVENTS = IT_EVENTS3[]
IT_SORT = IT_SORT
I_TEXT = ' '
TABLES
T_OUTTAB = IT_MARD .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
IS_PRINT = IS_PRINT
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER = E_EXIT_CAUSED_BY_CALLER
ES_EXIT_CAUSED_BY_USER = ES_EXIT_CAUSED_BY_USER
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " disply_output
*& Form top_of_page_one
text
FORM F_TOP_OF_PAGE_ONE.
WRITE: / 'Header details (MARA)'.
ENDFORM. "top_of_page_one
*& Form top_of_page_one
text
FORM F_TOP_OF_PAGE_TWO.
WRITE: / 'Item details (MARC)'.
ENDFORM. "top_of_page_one
*& Form top_of_page_one
text
FORM F_TOP_OF_PAGE_THREE.
WRITE: / 'Item details (MARD)'.
ENDFORM. "top_of_page_one
regards,
venkat. -
How to update when i have two updateable report on single page
Hi,
I've two updateable report created using pl/sql procedure. I really don't know how to update both reports at the same time. I report contains only one row and second one contains multiple rows.
For the second one, i use
FOR i IN 1..HTMLDB_APPLICATION.G_F01.COUNT
LOOP
UPDATE table
SET col3=HTMLDB_APPLICATION.G_F03(i),
col4=HTMLDB_APPLICATION.G_F04(i)
WHERE col1=HTMLDB_APPLICATION.G_F01(i) and
col2=HTMLDB_APPLICATION.G_F02(i);
end loop;
how to update the 1st report. Please help mewhen you use the htmldb_item api to render form elements to your pages, those values end up in the htmldb_application.g_fNN arrays. i'm not sure how you defined your first report region, but you seem to be populating the g_f01 through g_f04 arrays with your second. if that's the case, try populating g_f05 with your first region. a query region like...
select htmldb_item.text(5,ename) from emp
...would do it. you should then be able to access those submitted values in the htmldb_application.g_f05 array.
hope this helps,
raj -
Two BI Reports in one WEBI Report ?
Hi Guys
i have 2 BI sales reports in BEX Query Designer. One shows the Summary of Sales in a month and the Other shows the Details of the Sales. The USers want to see both the Reports in WEBI on one page as one report. they want the summary report to show on the top part of the page and the Detail part on the bottom of the same page.
is this possible ?
if so what will happen to the two selection menus for each report in WEBI. both BI reports have a selection menu. will they show up as one selections menu in the WEBI report?if you have the same text for the prompts into the selection lists for your Bex queries, i think Webi will merge them into one promots, im not sure, but i think it will be merged
but make sure that they have the same prompt text
good luck -
How to show all the rows of a report in one page
My report has 30 rows, by default it just show 15 rows. I want to show all the rows just in one page, without cliking link or arrow to see the left.
In the Layout and Pagination:
Report Template: template: 15. Standard Report (PPR)
Pagination Scheme: Row Ranges X to Y (no pagination)
Display Position: Bottom - Right
Number of Rows: 1000
Number of Rows (item) 1000
Maximum Row Count: 1000
How to fix it?
Thanks.
JenOk, I think I got it. I needed to blank out Number of Rows(item), Maximum row count and only populate Number of Rows. I was sure I did that before and it didnt work.
Do you think that the Sessions in Apex can cause unexpected results? I have found that when I make changes I have to log all the way out of Apex, close my browser and reopen everything to ensure that my change took. Does anyone else have this issue? I can move this into a different thread if need be.
Thx! -
How can you have two link styles on one page?
I have one style (formatted link style) for internal links in
my footer but I want a different style for the external links in my
mainContent. Is it possible to have two different "styles" of links
on one page? I tried creating a new set for the mainContent links
and being positioned underneath my footer link's styles, the "new"
mainContent link styles overrode the footer link style. Is there
another way of going about this?
Thanks anyone, JulieJulie:
> I'm just not code savvy.
As long as you permit yourself to offer this argument, you
will struggle
with Dreamweaver. If you are serious and want to improve, you
will have to
overcome your code-phobia.
What is in these two files?
> <link href="css/area.css" rel="stylesheet"
type="text/css" />
> <link href="css/footlinks.css" rel="stylesheet"
type="text/css"
> media="screen"
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Rock Artist" <[email protected]> wrote in
message
news:[email protected]...
> Murray, I was just looking over my code and noticed the
links in my footer
> are
> styled, in the first place, by a class I created in my
main.css (for all
> of my
> pages) called ".webdis" (nickname for webmaster and
disclaimer). I do see
> my
> link format style in the head of this document but am I
supposed to see it
> where the footer is (in the code)?
>
> If you look at the first external link (the only one I
have attached a
> link to
> so far):
> </p>
> <p class="contentlinx"><a href="
http://www.hotsprings.org/">Hot
> Springs
> Convention & Visitor's Bureau</a><br
/>
>
http://www.hotsprings.org/<br
/>
> </p>
>
> It took on same style as my footer links. I'm a little
frustrated, it just
> seems like it should be so simple. I'm ready to launch
this thing tonight
> and
> this is the only "little" thing I have left to do. I
hate to cheat and
> make
> each one of these site links a graphic and link it as a
graphic, but I am
> so
> ready to get this thing up.
>
> I'm just not code savvy. I am going to attach my code to
this reply and
> maybe
> you can tell me what I'm doing wrong. Thanks, Julie
>
>
>
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" />
> <title>Area Interests</title>
>
> <link href="css/main.css" rel="stylesheet"
type="text/css" />
> <style type="text/css">
> <!--
> .contentlinx {
> font-family: Arial, Helvetica, sans-serif;
> font-size: 14px;
> color: #336600;
> }
> -->
> </style>
> <link href="css/area.css" rel="stylesheet"
type="text/css" />
> <link href="css/footlinks.css" rel="stylesheet"
type="text/css"
> media="screen"
> />
> </head>
>
> <body>
> <div id="wrapper">
> <div id="header"></div>
> <div id="sidebar">
> <p align="center"><a
href="index.html"><img
> src="images/vert_nav_bar/home_button.jpg"
alt="navigation button to home"
> width="155" height="50" /></a><a
href="property.html"><img
> src="images/vert_nav_bar/property_button.jpg"
alt="navigation button for
> property" width="155" height="50" /></a><a
href="maps.html"><img
> src="images/vert_nav_bar/maps_button.jpg"
alt="navigation button for maps"
> width="155" height="50" /></a><a
href="gallery.html"><img
> src="images/vert_nav_bar/gallery_button.jpg"
alt="navigation button for
> photo
> gallery" width="155" height="75" /></a><a
href="gallery.html"><img
> src="images/vert_nav_bar/area_button.jpg"
alt="navigation button for area
> interests" width="155" height="75" /></a><a
href="contact.html"><img
> src="images/vert_nav_bar/contact_button.jpg"
alt="navigation button for
> contact
> us" width="155" height="75" /></a></p>
> <div id="sidephoto"><img
src="images/tree_flower.jpg" alt="garvan tree
> flower" width="145" height="275" /></div>
> </div>
> <div id="header2">
> <h2 class="style2">AREA INTERESTS</h2>
> </div>
> <div class="proptext" id="content">
> <p>HOT SPRINGS NATIONAL PARK, ARKANSAS</p>
> <div id="photofeature"><img
src="images/garvin_stream.jpg" alt="garvan
> gardens" width="275" height="218" /></div>
> <p align="left">America's first resort, also
referred to as "The
> Spa
> City", Hot Springs definitely has a pulse
> of its own. Visit the sites below to find out why this
is one of
> the
> most popular vacation destinations in the South.
Featuring world famous
> natural
> hot springs, historic bathhouse row, and thoroughbred
horse racing at
> Oaklawn
> Park. The perfect place to relax, the perfect place for
adventure, Hot
> Springs
> provides a year-round opportunity for outdoor
recreation, world-class bass
> fishing and fabulous water sport activities, hiking,
horseback riding and
> quartz crystal hunting. In fact, take a day trip to
Murfreesboro to the
> Crater
> of Diamonds State Park, the only diamond-producing site
in the world that
> is
> open to the public and try your hand at diamond hunting
or searching for
> 40
> other types of semi-precious stones, rocks and minerals.
Garvan Woodland
> Gardens, a 210 acre forested peninsula jutting into Lake
Hamilton with a
> showcase of floral landscapes, streams and waterfalls,
is a "must
> see". Hot Springs has a strong art community as
well. Enjoy artist's
> galleries, film-making events and musical venues all
over town. Did I
> mention
> historical architecture? There is too much to mention
here about this
> wonderful
> city, please see for yourself by visiting the local
sites below to see
> what's
> happening in and around town.<br />
> </p>
> <p class="contentlinx"><a href="
http://www.hotsprings.org/">Hot
> Springs
> Convention & Visitor's Bureau</a><br
/>
>
http://www.hotsprings.org/<br
/>
> </p>
> <p class="contentlinx">Facts About Hot
Springs<br />
>
http://www.hotsprings.org/media_room/news-detail.asp?news_id=9</p>
> <p class="contentlinx">City of Hot Springs<br
/>
>
http://cityhs.net/</p>
> <p><span class="contentlinx">The Greater Hot
Springs Chamber of
> Commerce<br />
>
http://www.hotspringschamber.com/</span><br
/>
> </p>
> </div>
> <div id="footer">
> <p><span
>
class="webdis">WEBMASTER | &
> nbsp;<a
href="disclaimer.html">DISCLAIMER</a></span></p>
> </div>
> </div>
> </body>
> </html>
> -
Display two main reports in one
Post Author: BSong
CA Forum: Crystal Reports
I am try to display both Customer Invoice and Payment reports in one report for a chosen Customer. Since neither Invoice nor Payment should be sub report, how do I combine them together in one report two sections? Is this possible? I am pretty new working with Crystal Report. Could anyone help me on this?
Thanks,BillPost Author: BSong
CA Forum: Crystal Reports
Thanks for your replay.
But how do I link the two if they use two separate datasource? and each has its own prompt. Could you explain.
Thanks,Bill -
AJAX calling report from one page to another not Reseting Pagination
I have links on one page that when clicked are calling a report on another page and loading it in a DIV with AJAX. The problem I am having is that the reports on the 2nd page are built dynamicly depending on the link you click. If you are viewing lines 16-30 and go to a report that only has like 5 lines, you get the Need to Reset Pagination error.
Invalid set of rows requested, the source data of the report has been modified.Reset Pagination>
In the htmldb_Get line, I thought you could set it to reset pagination when it fires. The AJAX is below. Does the RP need to be somewere else? or am I just missing something...
function doReport(pC,pM) {
document.getElementById('report_drop').innerHTML = 'Loading Page...';
var tableRow = document.getElementById('reports');
tableRow.style.display = 'block';
var get = new htmldb_Get(null,$x('pFlowId').value,'RP',2);
get.add('P2_CODE',pC)
get.add('P2_MPC',pM);
gReturn = get.get(null,'<clip>','</clip>');
get = null;
$x('report_drop').innerHTML = gReturn;
init_htmlPPRReport($x('report_drop').getElementsByTagName('DIV')[0].id.replace('report',''));
return;
}So from what I understand the line below should be resetting this
var get = new htmldb_Get(null,$x('pFlowId').value,'RP',2); Edited by: Matt.Smith on Jul 18, 2011 12:08 PMHi,
Source setting for that form page item P1_COUNTRY is
Source Used:"Only when current value in the session state is null"
Source Type: Static Assignment.Since i build this form along with report.
Is im missing something.
Regards,
Mini
Maybe you are looking for
-
Getting Error while importing catalog xml
Hi , i am new to ATG. I am getting the below error when i tried to import the xml. D:\ATG\ATG9.0\home>bin\startSQLRepository -m DynamusicB2C -import ..\DynamusicB2C\config\dynamusic\DynamusicB2CData.xml -repository /atg/commerce/catalog/ProductCatalo
-
/3 Gb switch, Windows Server 2003 and no imagecfg.exe!
The Imagecfg tool is not provided in the support toolkit for Windows Server 2003. How do I then implement the /3 Gb switch for oracle.exe and tnslsnr.exe as has been recommended in Metalink notes 116076.1 and 46001.1? Also does this not appear a bit
-
Which FM to use to change the PO number in an Invoice Document with status = 3
Hi Experts, My requirement is to change the PO number in an Invoice Document. The Document Status (RBSTAT ) is 3. I tried with 'BAPI_INCOMINGINVOICE_CHANGE' but its not working instead showing a message 'Further processing of document not possible
-
How to copy a document from one CM Repository to another CM Repository?
I am trying to build a UI Command that similiar to the standard "Delete" UICommand, but the only thing is before the document get deleted in the current repository (say Default - it is a CM Repository with fsdb mode), it create a copy in another arc
-
E6 - Mail for Exchange-invalid credentials
Hi, need some help.... After configuring my nokia E6 for Exchange mail I keep receiving a message "mail for exchange-invalid credentials". I've checked all my credentials en configuration: they are correct. I have tried the configurations on a Nokia