Multiple select list for one field in form
Friends,
I have a form , which is having many fields. One of the field are day/date. In this field i have to take 3 dropdown lists. like one for date, one for day and another for year. I have created three lov's for the day,date and year but for the field day/date i am able to apply only one lov. Any way so that i can display all the three lov for one field
example
day/date: day -- (dropdown list)
date -- (dropdown list)
year -- (dropdown list)
thanks in advance
adi
Edited by: Adi's on Feb 16, 2010 11:46 PM
Edited by: Adi's on Feb 16, 2010 11:47 PM
Edited by: Adi's on Feb 16, 2010 11:52 PM
nope, I just gave u an example to combime day , date and year fields in one select list, it does not matter whether they are in one table or multiple table and you dont require to create any tables for this, I assumed your lov for day / date / year are dynamic not static.
Regards,
Shijesh
Similar Messages
-
"Key and Text" values in variable selection list for a field
Hi,
we have created the variable for the one of the navigation attributes of the "0customer" field .
for the customer field in BEX settings we are having "Text" as display.
for the navigation field in BEX settings we are having "Key" as display.
while running the reports in the variable selection list for some reports we having both KEY and text for selection and for others only text are displayed,
we have checked the BEX settings in field and query level there are same.
Please help us here.Check the setting again in the Query level and then maku sure you save it. Come out of the query and then re-open the query and execute, you can see the chages in the output.
-
How to use select statement for one field
I want to fetch the data from table and only one field , the below code i written is correct or not , because only for one field i used endselct if i am not giving endselect it is showing error. Please suggest me.
DATA : SBELN TYPE VBAK-VBELN.
parameters : s_vbeln type vbak-vbeln.
select vbeln from vbak into sbeln
where vbeln = P_VBELN.
endselect.Hi ,
As because you want single field but not single record so SELECT SINGLE is not correct .
You need to create a internal table with the field of VBELN.
Then you need to fetch the records from the VBELN field of table VBAK.
Try this code --
DATA : t_itab like table of VBAK-VBELN.
parameters : s_vbeln type vbak-vbeln.
select vbeln from vbak into table t_itab
where vbeln = s_VBELN.
Regards
Pinaki -
Multiple-Selection List Box Values in Multiple Columns
I am using InfoPath 2010 with SharePoint 2013. I have a form with a multiple-selection list box which has A LOT of choices. Instead of displaying all the choices in one column, is it possible to display the values of my list box in several
columns?Hi Andrea,
I agree with Brij, one multiple-selection list box is associated with one list field, we cannot use the one multiple selection list box value for other multiple selection list boxes, we need to create multiple choices for each multiple-selection list box
control in InfoPath form.
Thanks
Daniel Yang
TechNet Community Support -
Cascading select list issue in a tabular form
hello,
how can i implement cascading select list for filtering my tabular form report results.
Like i want to have the cascading select list above the tabualr form report such that when i select the value and try to click a button, my tabular form report should filter the report based on the select list value.
i want to have three select list items above my report - and these select list are dependent on one other - tats why i want to make them cascading select list.
can anyone help me out with cascading select list.
thanks.Thank you so much for the quick response saved my life!.
For future reference let examples of the use of APEX_UTIL.SAVEKEY_VC2 and APEX_UTIL.KEYVAL_VC2
This is the query of the Tabular Form
SELECT den.cod_encuesta,
den.cod_det_encuesta,
den.cod_pregunta,
pre.nombre_pregunta,
den.respuesta,
den.observaciones,
APEX_UTIL.SAVEKEY_VC2(den.cod_pregunta) codpreg
FROM enc_det_encuesta den, enc_pregunta pre
WHERE den.cod_pregunta = pre.cod_pregunta
AND den.cod_encuesta = :P6_COD_ENCUESTAThis is the query "Select list"
SELECT nombre_respuesta, cod_respuesta
FROM enc_respuesta
WHERE cod_pregunta = APEX_UTIL.KEYVAL_VC2regards
Gerard -
Multiple Checkbox Values Into One Field
Hopefully someone can help me with this issue I'm having.
I'm trying to save the values of multiple selected checkboxes into one field separated by commas through ADDT's Insert Transaction code. I can do this easily with DW's standard insert record wizard by using the PHP implode() function but I haven't been able to figure it out with ADDT's code.
<form>
<input type="checkbox" value="1" name="program[]" /> Program One
<input type="checkbox" value="2" name="program[]" /> Program Two
<input type="checkbox" value="3" name="program[]" /> Program Three
<input type="checkbox" value="4" name="program[]" /> Program Four
</form>
THIS IS ADDT'S CODING
$ins_quoteManager->addColumn("programs", "STRING_TYPE", "POST", "programs");
THIS WORKS VIA DREAMWEAVER'S INSERT RECORD WIZARD
Original: GetSQLValueString($_POST['programs'], "text"),
Modified: GetSQLValueString(implode(',',$_POST['programs']), "text"),
Anyone know how to modify the ADDT code with the implode function to get this to work?Have you tried ADDT´s "comma-separated checkboxes" form control, which will also store the values into a field of your choice (and of course retrieve them from there on update record - pages) ? The only possible drawback might be, that the checkboxes can´t be defined statically, means that the array of value/label - pairs will be retrieved from another table by establishing an additional recordset.
Cheers,
Günter -
Hello there - Before I explain my issue, I would like to point out that I have reviewed some other discussions on selecting default values for multiple selection listbox. But my issue is specific and different, and not answered by any of the discussions
I visited.
I have a multiple selection list box (say for example all countries in the world as values), and I would like to pre-select or setup multiple default values (say five countries) based on some criteria that I query from MS SQL database table.
I know we can go to Data | Default Values option to setup one or many default values for multiple selection list box. When I enter the default values manually this works. I also right click the field under the Multiple-Selection List Box group, then select
Add another Value Below and set the Default Value for this field to setup multiple default values.
However, if I reference a field (either an infopath field or a field from SQL database) I am not able to setup multiple default values. Infopath automatically selects the last field I selected for all instances and in the end I am able to see only one
default value selected instead of many. How to fix this problem? Why would infopath allow multiple default values when we enter it manually but not when we reference some fields?
Please let me know if you need more info. Appreciate your help.
Thanks!Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not. -
I would like to be able to submit an Infopath form with a multiple selection list box in Sharepoint as multiple entries on a Sharepoint list.
For example, a user has to complete the following fields:
First Name:
Last Name:
Favorite Color (can select more than one):
[] Blue
[] Red
[] Yellow
[] Green
If the user picks blue AND red and submits the form, the Sharepoint list would feature TWO entries, both with their first and last names, but with different colors in the "Favorite Color" column.
Please let me know if there is a way to do this. Any guidance would be helpful!Hi redhotc,
According to your description, my understanding is that you want to set multiple default values for a multiple checkbox list in InfoPath form.
I did a test with SQL database table. I set three default values for the checkbox list by adding three values field under the group field(Data->Default values), each value field is for a default value. Then publish it to my SharePoint site, everything
was fine.Please have a try as the below link:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Note: if you are using SQL databse table, you may need to enable ‘Allow cross-domain data access for user form templates that use connection settings in a data connection file’ in CA. More information, please refer to:
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010customization.aspx?ID=418b9423-a96c-4e5e-91f9-6a1b010ebb69
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Value of Multiple-Selection List box is not appearing "calculated value" field of it
Hello,
We have created one selection list box using control "Multiple Selection List Box", where user can select one or more values.
We have created one view in InfoPath form, which have calculated value of fields(just showing purpose and printing purpose this view has ben created).
In this when we try to show calculated value of field is of Multiple Selection List Box, it's showing as "Off".
Could you please help us out.
Thanking you in advance.
Regards,
JayashriHi,
Thanks for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Set focus on item that selected in multiple-selection list box field in infopath
Hi
I have multiple-selection list box field in infopath that have for example 40 items. (I customize sharepoint list with infopath),then
publish infopath form in to sharepoint list. users want to add new item,when they selected or checked each item in multiple selection list box, after that automatically control focus on first item, but I want to focus remain on that item
I was selected. Why this happen?! I also set postback settings to “never” in multiple-selection list box properties. But didn’t work.
Thanks.Hi,
According to your post, my understanding is that you wanted to find several columns based on user selection of checkboxes in one of the Multiple-selection List Box.
I recommend to customize the form to concatenate values from choice field (with multiple values) into single line text box, and then hide the fields based on the text box value.
We can follow the steps as following:
Add a text box control(filed 3) on the form to hold the value selection in the multiple selection list box.
Set the default value for the text box control as
substring-after(eval(eval(Value, 'concat(., ";")'), ".."), ";")
(you need to change the ‘Value’ in the formula to your multiple selection list box name: filed1).
Add the conditional formatting on the flied: flied 3 does not contain value (you need to change the ‘Value’ in the formula to your multiple selection list box value.).
In addition, you can add Formatting action to hide the text box control.
Here are the result screenshots for you to take a look at:
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Checked some items of multiple-selection list box when form loaded in infopath
Hi
I customize sharepoint list with infopath. I have multiple-selection list box and want to checked some items of that automatically when form loaded. how can do this?
Thanks.Hi,
According to your description, my understanding is that you want to pre-select some items in the Multiple-Selection List Box.
I recommend to follow the steps below to achieve this goal:
Click Default Values under Data tab in InfoPath, expand the dataFields and navigate to the Multiple-Selection List Box field.
Set the Default Value of the Multiple-Selection List Box field.
Right click the field under the Multiple-Selection List Box group, then select Add another Value Below and set the Default Value for this field.
Repeat step3 based on the number of the items that you want to be pre-selected.
More information are provided in the link below:
http://www.bizsupportonline.net/infopath2010/pre-select-items-multiple-selection-list-box-infopath-2010.htm
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Add List box for one field in ALV GRID
Hi All,
I need to add drop down list box for one field in ALV Grid.
If any body knows, please help.
Thanks in advance.
Regards
MangleshHi,
Here is the ex where i have used for date parameter in the sel screen
type-pools: vrm.
data: name type vrm_id,
list type vrm_values,
value like line of list.
parameters : p_date like p_date2
as listbox visible length 15.
at selection-screen output.
name = 'P_DATE'.
value-key = '1'.
value-text = 'Today'.
append value to list.
value-key = '2'.
value-text = 'Last 7 days'.
append value to list.
value-key = '3'.
value-text = 'Last 30 days'.
append value to list.
value-key = '4'.
value-text = 'Last 90 days'.
append value to list.
value-key = '5'.
value-text = 'Last year'.
append value to list.
Call the ''VRM_SET_VALUES' to display the values in Listbox
call function 'VRM_SET_VALUES'
exporting
id = name
values = list.
at selection-screen.
if sy-ucomm = 'CLI1'.
sscrfields-ucomm = 'ONLI'(001).
endif.
if p_date = '1'.
p_date11 = sy-datum .
elseif p_date = '2'.
p_date11 = ( sy-datum - 7 ).
elseif p_date = '3'.
p_date11 = ( sy-datum - 30 ).
elseif p_date = '4'.
p_date11 = ( sy-datum - 90 ).
elseif p_date = '5'.
p_date11 = ( sy-datum - 365 ).
endif.
Hope this helps u..
Please reward points if useful.
Regards,
Sreenivas -
Multiple Select boxes in one form
Does anyone know if it is possible to have multiple select
boxes inside one form? I have six different select boxes that are
generated by six separate queries. The action page for all six
select boxes is the same so I just want one submit button so users
don't get confuse. I don't want to cluster up the page with submit
buttons but I may resort to that option.
My problem is the select boxes generate a number and when
that number is submitted I want to pass two other variables with it
to the action page. I tried putting a "Form" tag around the 6
select boxes. Inside each select box I tried to add an "Input
type="hidden"" and give thte name and values that I needed. That
worked for the first select box but when I tried the second select
box it used the hidden values for the first select box.
If anyone can help, I would greatly appreciate it. Or if you
have any other suggestions I am open to any.
ThanksPaross1,
I wasn't thinking about that and you gave me a great idea.
Here is how I changed my select boxes.
<cfform
action="Resolution_History.cfm?year=#year#&sessiontype=#sessiontype#&btype=res"
name="form">
<select name="SRINPUT">
<option value="">SR
<CFOUTPUT Query="findSR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HRINPUT">
<option value="">HR
<CFOUTPUT Query="findHR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SCRINPUT">
<option value="">SCR
<CFOUTPUT Query="findSCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<br>
<select name="HCRINPUT">
<option value="">HCR
<CFOUTPUT Query="findHCR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="SJRINPUT">
<option value="">SJR
<CFOUTPUT Query="findSJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<select name="HJRINPUT">
<option value="">HJR
<CFOUTPUT Query="findHJR"><Option
Value="#BILLNUMBER#">#BILLNUMBER#</cfoutput>
</select>
<INPUT TYPE="Submit" VALUE="Submit" alt="submit
button">
</cfform>
On the action page I need the below IF statement to work so
it will set the variables. It isn't working at this time. Its not
bringing the values of billnumber, houseorig or the billtype.
Do you have any thoughts? I know it is close. I need to set
all of the inputs to input4 to generate my queries.
<cfif form.srinput gt 0>
<cfset houseorig eq "s">
<cfset billtype eq "r">
<cfset srinput eq input4>
<cfelseif form.hrinput gt 0>
<cfset houseorig eq "h">
<cfset billtype eq "r">
<cfset hrinput eq input4>
<cfelseif form.scrinput gt 0>
<cfset houseorig eq "sc">
<cfset billtype eq "r">
<cfset scrinput eq input4>
<cfelseif form.hcrinput gt 0>
<cfset houseorig eq "hc">
<cfset billtype eq "r">
<cfset hcrinput eq input4>
<cfelseif form.sjrinput gt 0>
<cfset houseorig eq "sj">
<cfset billtype eq "r">
<cfset sjrinput eq input4>
<cfelse>
<cfset houseorig eq "hj">
<cfset billtype eq "r">
<cfset hjrinput eq input4>
</cfif> -
Multiple select options for an input field
Hi All,
We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
Please do let me know how to solve this.
Thanks & Regards,
Lavanya .Hi,
The requirement is : Suppose there is a input field PLANT.
If we give input for plant it gives related output.
Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
(Like we implement in ABAP)
Please do let me know how can this be implemented in BSP.
Thanks & Regards,
Lavanya.
Maybe you are looking for
-
How do I configure a proxy for all users via GPO on Server 2012 R2?
I would like to configure a proxy that applies to all users that log into our server running Server 2012 R2. I can manually set up the proxy (on an individual account basis) via Internet Options in Control Panel but this proxy needs to be configured
-
I cannot upgrade itunes in my MacBook air, why is that?
Can sombody tell me, why I can not upgrade itunes?
-
Can a middle school student qualify for Apple's education discount
I'm an 8th grader, going on high school soon, and I was wondering if a student in middle or high school can qualify for the Apple education discount?
-
BADI "COPCMESSAGECONTROL" , only one active implementation ?
Hi, I'd like to do a custom implementation of the BADI "COPCMESSAGECONTROL", eg "Z_COPCMESSAGECONTROL". For this BADI there's a SAP hint, that only one active implementation is allowed. Cause in our system there's already an active SAP implementation
-
Static again: methods vs direct access
Ok, I had the discussion about static some time ago. I made some tests and have another question about that, but this time it will be a long code included. Lets see: TestTest.java import java.io.*; public class TestTest public static void main(S