BADI "COPCMESSAGECONTROL" , only one active implementation ?

Hi,
I'd like to do a custom implementation of the BADI "COPCMESSAGECONTROL", eg
"Z_COPCMESSAGECONTROL".
For this BADI there's a SAP hint, that only one active implementation is allowed.
Cause in our system there's already an active SAP implementation "/CWM/MESSAGE_CK" I don't know,
if I can activate my custom "Z_COPCMESSAGECONTROL" implementation in addition to the SAP implementation.
Any Ideas ? Many thanks in advance !
Regards
Olaf

If you look at the BADI definition in SE18, you'll find that the 'multiple use' flag is NOT set meaning by default this BADI can only be implemented once.
Therefore if you need to add custom coding to this BADI implementation either you add it to the implemented methods (modification) or you deactivate the standard BADI and implement your own BADI by copying the standard coding and adding yours to it (also a modification, but you would have your coding in a Z-class).
However whenever you copy standard SAP code into a custom peogram or class any notes that SAP releases which makes changes to that BADI implementation will not be applied to your Z-copy!
Hope that helps,
Michael

Similar Messages

How to visually (!) remove "sequence" frame with only one activity inside?

Due to previous manipulations it could happen, that there are sequences (=visual sequences frame)
which contain only one activity.
These sequence frames are needless.
Ok, I could remove them directly in source code.
But is there a way to remove them visually WITHOUT removing then inner activity as well?
Peter

If I would have to do that, I will drag the activity outside the sequence and delete the sequence.

Only one active call in queue

After smooth with wizard create application on ccx 5.0(2) everything was going well except thing that I can have only one call at queue. For next call I get busy signal until call in queue was terminate or answered.

You need a bigger port pool (group). I haven't played with UCCX for a while, but with IPIVR you had to configure both the number of ports and the size of the Media Control Group.
Check your settings.
Maybe you have one configured to match the number of ports you want - probably up to your licence - (corresponding to the number of concurrent calls in the IVR getting treatment or in queue) but not the other. Easy mistake to make back then.
Regards,
Geoff

I get duplicate e-mails having only one active address

IF I RECEIVE AN E-MAIL TWICE HOW DO I DROP ONE OF THEM FROM MY E-MAIL MESSAGES?

hello,
d_fisher meant Shift + trackball.
Alt + Trackball = Page up / Page down.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Multiple active implementations for filter value EXEC_METHODCALL_PPF

Hi,
I have created an implementation for the EXEC_METHODCALL_PPF badi which is triggered from an action in a transaction.It is working fine in the development system but while transporting it to the quality system I am getting the following error.
Multiple active implementations for filter value EXEC_METHODCALL_PPF definition
Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
AFTER_IMP_SXCI belongs to package SECE
The errors affect the following components:
BC-DWB-CEX (Customer Enhancements)
When i refer to the documentation of the error message it says....
Multiple active implementations for filter value EXEC_METHODCALL_PPF definition
Message no. ENHANCEMENT474
Diagnosis
There are multiple active implementations of the same business add-in definition, even though this is not allowed.
System Response
This is not correct and should not occur.
Procedure
Deactivate the implementations active for this BAdI definition one by one until there is only one active implementation left.
You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve these conflicts systematically.
But I am apprehensive if deactivating all the standard implemenatations of the badi will create any problem.Please can any one suggest as to how to resolve this issue....
Any help would be highly appreciated.

Hello,
Please check the following suggestions
a) go to se18 -> enter your definition name and see if "Multiple" call check box is ticked in Quality
b)compare your transports since some objects in development may not have found it's way to the quality server
c)Please see if for the same definition,for different filter values...implementations are done...if so,is multiple checkbox marked? in quality also?if you have multiple implementations with the check box not marked..the message conveys u cannot have multiple implementations of the same badi....
d)also check if the filter being passed to the BADI is ok
Hope it was useful in some way
Reward if helpful
Regards
Byju

Multiple active implementation

Hi,
For a badi, can be multiple active implementations?
if yes how can I do that?
Thanks.
deniz.

Hi We have a rquirement for doing this
Can you please clarify me
Can I do multiple badi implimentation for std Badi (bbp_WF....)
my requirement this I need to do for   same business object BUs2121
1. For company code   As01 I need to use different logic for Schopping Cart work flow
2. For cmpany code   As 35   I need to use differen logic for Schopping Car Work flow
Can you please provide me the docuemnts if any to do this.
Sekhar

Check active implementation in badi

Hi Expert,
Pl's let me know how to I check active implementation in badi in ECC6.0.
I have tried to find the solution by using call function 'SXC_EXIT_CHECK_ACTIVE' , as used in previous version of the server.
But this is not helping me out.
Kindly let me know if there exists a way to check the active implementations in badi.
Tx
Kshitija

Can you not do this from SE19? If you know the BADI definition name just do an F4 on the implementation, and put in the definition name, and select Active Only option, and you should see the list.
Albert

Am i the only one who when trying to enter the code for creative cloud activation ?

I give up,i have been trying to activate a 3 month subscription for CS6 from Staples and every time i try the code it will not work. I have used the chat live and spent about 3 hours already going nowhere. I do not like talking on the phone to some help desk overseas and the only thing i think left to do is to return the junk.

I tried all that and even took a picture of the numbers and blew them up so a blind person could read them and had 3 others read them off. A simple way to fix the problem is get someone on Adobes staff to find a font that most people can read from whatever product the stick it to.
John McDonough
Date: Wed, 1 Aug 2012 18:33:58 -0600
From: [email protected]
To: [email protected]
Subject: Am i the only one who when trying to enter the code for creative cloud activation ?
    Re: Am i the only one who when trying to enter the code for creative cloud activation ?
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey John,
Not sure if it helps or not, but I know sometimes with codes like that its really hard to tell certain characters apart, O - like in Oscar versus 0 - number and number 1 versus lowercase L like in Lima.
Might test entering it both ways if you have any suspect characters?
-Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4592955#4592955
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4592955#4592955. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Design Problem : How to design/code a java client which is deployed to all the machines in a cluster and make sure that only one of the java client is active

          hi ,
          I have to design a java client (which is basically a JMS message listener)which
          is deplloyed to all the servers in the cluster. But as these are message listeners,
          i want only one of the instance to be active at a time.
          If the server on which the client is active goes down , I want the second server
          to start listening to messages.
          How do i design this ? Also is there a public api for multicasting that we can
          use ?
          Anybody has an idea on how to go about this..
          Thanks
          nisha


Hi Nisha,
          Failover message listeners? Sounds like you want MDBs, which are deployed on all nodes in a
          cluster. If your JMS destination is a queue, then only one MDB will pick up the message. And just
          like any other ejb service, MDBs failover.
          Gene
          "Nisha" <[email protected]> wrote in message news:[email protected]..
          hi ,
          I have to design a java client (which is basically a JMS message listener)which
          is deplloyed to all the servers in the cluster. But as these are message listeners,
          i want only one of the instance to be active at a time.
          If the server on which the client is active goes down , I want the second server
          to start listening to messages.
          How do i design this ? Also is there a public api for multicasting that we can
          use ?
          Anybody has an idea on how to go about this..
          Thanks
          nisha

Activating only one function-exit in a multiple function-exit in CMOD

Dear All,
I am using customer-exit for doing validation in PO during saving. I am using EXIT EXIT_SAPMM06E_012 under enhancement
MM06E005. The code is working fine. The problem is that when I am activating the screen all the components under that enhancements are getting activated. There are 10 function-exits, 6 screen-exits and 2 incude tables. I have not added any new screen or done custom include. I only want to activate EXIT_SAPMM06E_012, rest I want to deactivate. It is giving a dump in production server when we are trying to create a contract as it is looking for a screen 0211 which we have not created.
Regards
D. Mallick

am using customer-exit for doing validation in PO during saving. I am using EXIT EXIT_SAPMM06E_012 under enhancement
MM06E005. The code is working fine. The problem is that when I am activating the screen all the components under that enhancements are getting activated. There are 10 function-exits, 6 screen-exits and 2 incude tables. I have not added any new screen or done custom include. I only want to activate EXIT_SAPMM06E_012, rest I want to deactivate. It is giving a dump in production server when we are trying to create a contract as it is looking for a screen 0211 which we have not created.
HI ,
You can activate only one function exit EXIT_SAPMM06E_012, But you must and should create below empty screen and active Using SE51.
SAPLXM06                       0101
SAPLXM06                       0111
SAPLXM06                       0201
SAPLXM06                       0211
SAPLXM06                       0301
SAPLXM06                       0311
Thanks & Regards
Sudheer Madisetty

I have problem with my iphone,i activate him with my apple id but i give him a resset and now don't whanna recognize my apple id,this phone wha activated with my apple id,i am the first and only one propert

i have problem with my iphone,i activate him with my apple id but i give him a resset and now don't whanna recognize my apple id,this phone wha activated with my apple id,i am the first and only one propert

my imei is 356955067431598 iphone 6 space grey 16gb

Why I cannot enter an "Activity Type" for a trip with only one destination?

Hello experts,
Doing a travel expense the user must specify the type of activity (u201CAu201D, u201COu201D or u201CSu201D) that the trip expense is involved, but this option itu2019s only available when the trip has more than one destination (inside the table u201CAdditional Destinationsu201D):
[Screen Shot # 1|http://img145.imageshack.us/img145/1789/acttype.jpg]
[Screen Shot # 2|http://img404.imageshack.us/img404/8812/ptk05.jpg]
When I make a travel expense report, the field activity does not
appear, only on additional destination. Why cannot I enter an activity
type for the first destination, only for additional destination?
I think that the system should allow to enter an activity on general
trip data.
Thanks on advance
Edited by: Luiz Victor Santos on Apr 20, 2010 10:55 PM

Hi,
Sorry I gave you the customizing entry for transaction PR05 and not for TRIP.
So, go there :
Tx FITVFELD.
--> Your Trip Provision Variant. --> Trip Schema --> Travel Manager (Travel Expenses Only) --> General Trip Data --> Trip Itinerary
The Field "Trip Activity Type - PTK05_N-KZTKT " should have the parameters "Field Is Visible" and "Field ready for input" checked.
As you can see, the entry point is in "Trip itinerary" Subscreen and not in "General Trip Data Subscreen".
This means that unfortunately the Trip Activity Type is not available in the subscreen General Trip Data.
If I do like this in my test system, in the TRIP tx I can see that the field Activity Type appears also in the subscreen "Mileage and Per Diem Reimbursement". So If I enter my activity type here, then it populates the value in my first destination (in Trip Itinerary) even if I have only one destination.
Hope this help ;o)
Regards,
Christophe

Problem Activating--Am I the Only One?

So I got my iPhone, went through the activation process via iTunes and I thought all was well. Except that it won't make a call. I figured I screwed something up. Called Verizon. Apparently, the number assigned to my iPhone, which is in my paperwork that came with the phone, is not in Verizon's system. It is floating around, not assigned to anyone. It's a "glitch" and the tech support guy said I'm not the only one although I'm not seeing anything on this message board remotely similar to my problem. Tech support is working on it and they were VERY responsive. They said the pre-order process was something they've never done before and causing some issues for some people. I've waited this long for an iPhone. I can wait until they get it figured out. Right now, it is a fully functional iPod touch! Anyone else having activation issues?

My iphone4 wouldn't activate after I did the i tunes sinc. I was directed to call customer support for activation. I tried to do the activation from the verizon site, but no go. The fix was simple for me. All id numbers were correct. I had to turn off old phone and reboot my iphone4, For 45 min on the phone, that's what fixed it. Pretty simple. It seems this is new for customer support, so they are taking a long time, as they read their instruction manual. It was a pleasant experience, though, just took a long time. I give them a 5 star for effort. Lol. For why it didn't sinc the first time. I have no idea. It should have, but didn't. Tell me it wasn't just to turn my old phone off. Lol.

Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

I've never had any problems with mine ever. The only freeze I've had was from a file I recorded on tivo, cut commericals out in movie maker and then re-encoded to the lowest possible bit rate that that zens nati've resolution supports. Try turning your sensitivity in the touch pad down. Sometimes if you have it up to high you may have a chance of doing that (although I have only had slow response, instead of a freeze by doing that).
You also have to compare to all of the other products out there: Ipod and Zune are a lot worse with pathetic little problems (annoyances). I didn't pay for tech support?

Libretto W100: only one touch screen is active

hy ..
please help me,,
I have a toshiba libretto, but only one is active touchscreen ..
it's my new toshiba libretto reinstall the windows 7 ..
please help me ..
ridho

Sorry mate but could you please provide more details?
As I understood your original post, you have installed new Windows 7 system on this Libretto W100 device. Right?
Now the question: did you install the essential Toshiba software?
On the Toshiba EU driver page you can find drivers and tools for Libretto W100.
The +Libretto Software v 1.0.22.00+ is an essential part and its strongly recommended to install this part!

BADI "COPCMESSAGECONTROL" , only one active implementation ?

Similar Messages

Maybe you are looking for