Multiple sender - Using BPM

Hi,
I have 4 file senders to send message of same structure to BPM to process it.
There is no corelation between the messages.
But I am wondering, will it work, if I add multiple receivers using fork step and initiating each one as 'start process'?
Can we have multiple receivers in BPM with any corelation?
Please advice
Thanks,
Karthik
Edited by: Karthik Kaveriselvan on May 31, 2009 10:10 AM

But we need not bundle the messages.
agreed....but since the messages are coming from different sources and if you need to collsct the messages separately you will need to define correlation
As you mentioned that the messages have the same structure...check if you can cheat the BPM and use the following concept...not sure whether it will work...give it a try:
http://help.sap.com/saphelp_nw70/helpdata/EN/08/16163ff8519a06e10000000a114084/content.htm
The only reason of having two senders in the same BPM, the way these messages to be treated are same.
could not make what you exactly mean by the above statement.
Regards,
Abhishek.

Similar Messages

File to RFC with multiple records using BPM Scenario Error...!!!

Hello Guru's,
I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
Can any one tell me what mistake would i have done.
Thanks in advance.

Hi,
There is one similar discussion I found,
FTP TO RFC using BPM
Thanks
Swarup

** How to deliver multiple files using BPM (From RFC output)

Hi Friends,
I am doing File-RFC-File scenario using BPM. I am using BAPI_SFLIGHT_GETLIST as my RFC (Standard RFC). If we execute this RFC, it will return the results in tables form. Assume that, the inputs to RFC is like below.
FromCountryKey : US
FromCity: NEW YORK
ToCountryKey: DE
ToCity: FRANKFURT.
The outputs from the RFC is like below.
26 Entries
CAR
CONN
FLDATE
AIR
AIR
DEPTIME
SEATSMAX
SEATSOCC
|
DL
0106
19.05.2008
JFK
FRA
19:35:00
280
266
UA
3516
20.05.2008
JFK
FRA
16:20:00
380
364
LH
0401
23.05.2008
JFK
FRA
18:30:00
220
209
LH
0401
28.05.2008
JFK
FRA
18:30:00
220
208
UA
3516
28.05.2008
JFK
FRA
16:20:00
380
367
DL
0106
16.06.2008
JFK
FRA
19:35:00
280
261
UA
3516
17.06.2008
JFK
FRA
16:20:00
380
357
LH
0401
20.06.2008
JFK
FRA
18:30:00
220
213
DL
0106
14.07.2008
JFK
FRA
19:35:00
280
1
UA
3516
15.07.2008
JFK
FRA
16:20:00
380
86
LH
0401
18.07.2008
JFK
FRA
18:30:00
220
123
DL
0106
11.08.2008
JFK
FRA
19:35:00
280
56
UA
3516
12.08.2008
JFK
FRA
16:20:00
380
67
LH
0401
15.08.2008
JFK
FRA
18:30:00
220
114
DL
0106
08.09.2008
JFK
FRA
19:35:00
280
0
UA
3516
09.09.2008
JFK
FRA
16:20:00
380
164
LH
0401
12.09.2008
JFK
FRA
18:30:00
220
64
DL
0106
06.10.2008
JFK
FRA
19:35:00
280
80
UA
3516
07.10.2008
JFK
FRA
16:20:00
380
8
LH
0401
10.10.2008
JFK
FRA
18:30:00
220
16
DL
0106
03.11.2008
JFK
FRA
19:35:00
280
11
UA
3516
04.11.2008
JFK
FRA
16:20:00
380
33
LH
0401
07.11.2008
JFK
FRA
18:30:00
220
53
DL
0106
01.12.2008
JFK
FRA
19:35:00
280
0
UA
3516
02.12.2008
JFK
FRA
16:20:00
380
45
LH
0401
05.12.2008
JFK
FRA
18:30:00
220
25
|
We need to create output file for each record. In this case, the system should generate 26 output files.
I imported the RFC and created the required interfaces and designed BPM also.
Start --> Receive step --> Synchronous Send --> Asynchronous Send
But, I stuck in how to deliver each record to the output file from BPM.
Any idea, friends. (like using BPM Multi-line option. or 'Receiver From' property in the Send Step)
Kindly help me friends to solve this issue.
Thanking you.
Kind Regards,
Jeg P.

Hi
You can do it by creating one another message interface having structure same as your table.
What you have to do is create a mapping in such a way that for each record in table one message(newly created) must be created.
Use that mapping in an interface mapping, remember occurence of target message should be 0..Unbounded both in message mapping and interface mapping.
Now create one single line message and one multiline message in BPM for newly created message.Use transformation step with new interface mapping, mention source(RFC response) and target message(use multiline element of new message) for the transformation step.
Use send step inside a block,set block mode to "forEach", and attach new message to that send step.
Use multiline and single element of new message in the property window of block.
Now your BPM will look like
Start ---> Receiver ---> Synchronous send ---> Transformation ---> Block ---> Async Send(within block)
I think in this way you can implement what you want.
Regards
Sami
Reward points if helpful.

Processing of multiple messages Using BPM

Hello everybody,
I am pretty much a newbie to this XI technology. I am currently testing a File to File scenario Concerning BPM. The source file contains multiple messages in an XML structure. How can each of these XML messages be posted as individual files? I have reffered to this <a href="/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi on BPM as a guideline; but here the number of messages are restricted and I want to dynamically determine how many messages are contained in the XML file. Anybody has any idea how to achieve this?
Thanks and Warm Regards,

Hello,
The blog you mentioned is for cutting one file into 2 files.
I think you need to use the "ParForEach" step in the BPM. This step is used to loop on a multiple line message and create a single message in one branch. Then you can add a send step in this branch and end only one message.
See the Flight Demo :
http://help.sap.com/saphelp_nw04/helpdata/en/5a/cede3fc6c6ec06e10000000a1550b0/frameset.htm
Object in IR :
BASIS -> http://sap.com/xi/XI/Demo/Agency -> BPM -> MultipleFlightBookingCoordination
Regards,
Chris

Sending the fault message payload to sender using BPM.

I have the scenario where BPM splits a file into multiple record and each record calls webservice.
For a successfull call a success response is generated by web service . For a failed transaction a fault message is sent back which needs to be delivered to the sender's mail ID.
I am not able send the fault message payload which contains the error message details to sender ..
Please suggest what can be done for such a scenario. Is there any way by which error details can be sent to sender?
Edited by: trisha.b on Nov 28, 2010 7:23 PM
Edited by: trisha.b on Nov 28, 2010 7:29 PM

Hi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil

Collecting and bundling messages from multiple interfaces using BPM

Hi friends,
I am currently working on bpmpatternmultilf(without condition).
In my source i have 3 messages having same message type.
Message type:
ID
Overall no
In the source i am placing 3 files like
message1.txt ID 100 Overall no 200
message2.txt ID 100 Overall no 300
message3.txt ID 100 Overall no 400.
I have used correlation element as ID.
But in the target file I am getting the result as ID 100 Overall no 200.
Overall no 300 and 400 are not present?
I understand that the messages are not getting collected and bundled?
Please help me out on this.
Thank you in advance

Hi, deepak:
To collect the message of same message interface, if you know that all the files will exist for a while,
and next bundle of file will come to the folder after a period of time saying 30 minutes.
You can have your receive step, followed by container operator to append individal messages to multi-line elements.You will need deadline block, put timeout to saying 10 minutes.
This to say that you collect all the messages in 10 minutes, and put them in multi-line elements, now you collected all the messages with different ID.
Next you need to design you multi-mapping, since your message is based on ID, you multi-mapping is m:n
Eventually, you will need transformation step to call the multi-mapping, map the multi-line elements to n target messages. Your final send step send n files to your target system.
Regards.
Liang

Collecting multiple idocs using BPM

Hi,
I have a scenario where idocs sent from R/3 system are collected in Xi and posted as a single message in the file. We have done all the configurations both in XI and R/3 pertaining IDOC.
When we trigger an idoc in the R/3 system,we are able to see the message that IDOC has been sent to XI system. But we are unable to see any of the message transfers in SXMB_MONI.
(In simple words our interfaces are not getting triggered.)
Could anyone help us in rectifying the problem?
Thanks & Regards,
Vishnu.

When you trigger the IDOC from R/3
--Did u complete the configuration part of sending the IDOC to XI, have you created the TRFC POrt in R/3, cross check the RFC dest which you are using here is pointing to Right Xi box?
Your configration looks fine for atleast to take IDOC in XI, rest i am not sure at this point.
---No errors in the SM58 on R/3?
---IDOC metadata is loaded in XI? do u c any entry in the IDX5?
--Is your IS been configured wth the tracle level parameters, if yes set it to 3 value
--is runitme paramter LOGGING, LOGGING_PROPOGATION,LOGGING_SYNC present in SXMB_ADM?
if you have these then atleast you should c an entry in SXMB_MONI with with either sucessfull or failed state.
More importanatly the LS name of the R/3 is according to standards what SAP says in SLD?
Edited by: Nisar Khan on Feb 28, 2008 11:00 AM

File to RFC Multiline using BPM

Hi Experts,
I am working on File To RFC Multiple Records using BPM. I am getting the below error. When i am activating Integration Process. I got the error as Element should not return Multiline Value. So i have changed the Message Mapping Occurance in Signature Tab to O to Unbounded. I am getting the below error in SXMB_MONI. Please check and guide me how to proceed further.
Regards,
GIRIDHAR
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Giridhar,
Check below thread:
BPE_ADAPTER UNKNOWN_MESSAGE
Regards,
Krupa

Send multiple records to rfc without using BPM

Dear Experts,
Could you please help on the following scenario.
I need to send multiple customer master data records from a file to rfc without using BPM.
The following is the mapping i am using
source Target( RFC)
====== =============
Tree occurance type Tree occurance
cust_mt 1..1
 customer 0..unbound -
> ztest_cust( rfc ) 1..1
 cname 1..1 -
> cname 0..1
 cno 1..1 -
> cno 0..1
 bank -
> bank 0..1
 item : 0..unbound
 code -
> code 0..1
 name -
> name 0..1
 location -
> location 0..1
1. Multiple banks possible for one customer
2. Multiple customers possible in datafile from mdm
Problem 1:Only one customer record from file is being sent to RFC thouth many records are in the file, the second, third .. and so on records not being sent to rfc.
Problem 2:
if add o.. unbound for the rfc occurance, <messages>,<message1> tags are getting added in message mapping, and no single customer record sent to rfc..
Your help is rewarded with good points.
Appreciate your help.
Thanks.
sravya.

Hi VJ,
Thank you for the immediate reply.
one more thing, when i tried to change the occurences of ztest_cust( rfc) to 0..unbound,
I am not seeing the occurances updated in the imported rfc structure.
The following is the wsdl for rfc, could you please help me to add occurances 0..unbound.
Thanks a lot.
sraya.
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:rfc="urn:sap-com:document:sap:rfc:functions" name="ZTEST_CUST" targetNamespace="urn:sap-com:document:sap:rfc:functions">
 <wsdl:documentation>
 test for mdm
 </wsdl:documentation>
 <wsdl:types>
 <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions">
 <xsd:element name="ZTEST_CUST">
 <xsd:complexType>
 <xsd:all>
 <xsd:element name="CNAME" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="10" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="CNO" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="10" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="BANK" minOccurs="0">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="item" type="ZST_CUST" minOccurs="0" maxOccurs="unbounded" />
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:all>
 </xsd:complexType>
 </xsd:element>
 <xsd:element name="ZTEST_CUST.Response">
 <xsd:complexType>
 <xsd:all>
 <xsd:element name="BANK" minOccurs="0">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="item" type="ZST_CUST" minOccurs="0" maxOccurs="unbounded" />
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:all>
 </xsd:complexType>
 </xsd:element>
 <xsd:complexType name="ZST_CUST">
 <xsd:sequence>
 <xsd:element name="CODE" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="60" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="NAME" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="60" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="LOCATION" minOccurs="0">
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="60" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
 </xsd:schema>
 </wsdl:types>
 <wsdl:message name="ZTEST_CUST.Input">
 <wsdl:part name="parameters" element="rfc:ZTEST_CUST" />
 </wsdl:message>
 <wsdl:message name="ZTEST_CUST.Output">
 <wsdl:part name="parameters" element="rfc:ZTEST_CUST.Response" />
 </wsdl:message>
 <wsdl:portType name="ZTEST_CUST.PortType">
 <wsdl:operation name="ZTEST_CUST">
 <wsdl:input message="rfc:ZTEST_CUST.Input" />
 <wsdl:output message="rfc:ZTEST_CUST.Output" />
 </wsdl:operation>
 </wsdl:portType>
 <wsdl:binding name="ZTEST_CUST.SAPBinding" type="rfc:ZTEST_CUST.PortType">
 <rfc:binding style="rfc" />
 <rfc:type name="ZST_CUST">
 <ifr:container xmlns:ifr="urn:sap-com:ifr:v2:metamodel" xmlns:xlink="http://www.w3.org/1999/xlink">
 <ifr:descriptor>
 <ifr:description language="EN">
 test
 </ifr:description>
 </ifr:descriptor>
 <ifr:properties>
 <ifr:sourceSystem />
 <ifr:sourceClient>
 020
 </ifr:sourceClient>
 <ifr:release>
 640
 </ifr:release>
 <ifr:category>
 structure
 </ifr:category>
 <ifr:unicode1>
 true
 </ifr:unicode1>
 <ifr:unicode2>
 true
 </ifr:unicode2>
 <ifr:isFlatStructure>
 true
 </ifr:isFlatStructure>
 </ifr:properties>
 <ifr:definition>
 <ifr:internalLength1>
 180
 </ifr:internalLength1>
 <ifr:internalLength2>
 360
 </ifr:internalLength2>
 <ifr:fields>
 <ifr:field name="CODE" category="simple">
 <ifr:descriptor />
 <ifr:properties>
 <ifr:helpValuesSupported>
 false
 </ifr:helpValuesSupported>
 <ifr:offset1>
 0
 </ifr:offset1>
 <ifr:offset2>
 0
 </ifr:offset2>
 </ifr:properties>
 <ifr:definition>
 <ifr:scalarType>
 <ifr:definition>
 <ifr:type>
 CHAR
 </ifr:type>
 <ifr:abapType>
 C
 </ifr:abapType>
 <ifr:length>
 60
 </ifr:length>
 <ifr:internalLength1>
 60
 </ifr:internalLength1>
 <ifr:internalLength2>
 120
 </ifr:internalLength2>
 <ifr:decimals>
 0
 </ifr:decimals>
 </ifr:definition>
 </ifr:scalarType>
 </ifr:definition>
 </ifr:field>
 <ifr:field name="NAME" category="simple">
 <ifr:descriptor />
 <ifr:properties>
 <ifr:helpValuesSupported>
 false
 </ifr:helpValuesSupported>
 <ifr:offset1>
 60
 </ifr:offset1>
 <ifr:offset2>
 120
 </ifr:offset2>
 </ifr:properties>
 <ifr:definition>
 <ifr:scalarType>
 <ifr:definition>
 <ifr:type>
 CHAR
 </ifr:type>
 <ifr:abapType>
 C
 </ifr:abapType>
 <ifr:length>
 60
 </ifr:length>
 <ifr:internalLength1>
 60
 </ifr:internalLength1>
 <ifr:internalLength2>
 120
 </ifr:internalLength2>
 <ifr:decimals>
 0
 </ifr:decimals>
 </ifr:definition>
 </ifr:scalarType>
 </ifr:definition>
 </ifr:field>
 <ifr:field name="LOCATION" category="simple">
 <ifr:descriptor />
 <ifr:properties>
 <ifr:helpValuesSupported>
 false
 </ifr:helpValuesSupported>
 <ifr:offset1>
 120
 </ifr:offset1>
 <ifr:offset2>
 240
 </ifr:offset2>
 </ifr:properties>
 <ifr:definition>
 <ifr:scalarType>
 <ifr:definition>
 <ifr:type>
 CHAR
 </ifr:type>
 <ifr:abapType>
 C
 </ifr:abapType>
 <ifr:length>
 60
 </ifr:length>
 <ifr:internalLength1>
 60
 </ifr:internalLength1>
 <ifr:internalLength2>
 120
 </ifr:internalLength2>
 <ifr:decimals>
 0
 </ifr:decimals>
 </ifr:definition>
 </ifr:scalarType>
 </ifr:definition>
 </ifr:field>
 </ifr:fields>
 </ifr:definition>
 </ifr:container>
 </rfc:type>
 <wsdl:operation name="ZTEST_CUST">
 <ifr:container xmlns:ifr="urn:sap-com:ifr:v2:metamodel" xmlns:xlink="http://www.w3.org/1999/xlink">
 <ifr:descriptor>
 <ifr:description language="EN">
 test for mdm
 </ifr:description>
 </ifr:descriptor>
 <ifr:properties>
 <ifr:sourceSystem />
 <ifr:sourceClient>
 020
 </ifr:sourceClient>
 <ifr:release>
 640
 </ifr:release>
 <ifr:package>
 $TMP
 </ifr:package>
 <ifr:akhNode />
 <ifr:released>
 external
 </ifr:released>
 <ifr:outbound>
 false
 </ifr:outbound>
 <ifr:synchronous>
 true
 </ifr:synchronous>
 <ifr:asynchronous>
 false
 </ifr:asynchronous>
 <ifr:unicode1>
 true
 </ifr:unicode1>
 <ifr:unicode2>
 true
 </ifr:unicode2>
 </ifr:properties>
 <ifr:definition>
 <ifr:parameters>
 <ifr:parameter name="CNAME">
 <ifr:descriptor>
 <ifr:description language="EN">
 Character Field Length = 10
 </ifr:description>
 </ifr:descriptor>
 <ifr:definition>
 <ifr:scalarType name="CHAR10">
 <ifr:properties>
 <ifr:helpValuesSupported>
 false
 </ifr:helpValuesSupported>
 <ifr:fixedValuesListDefined>
 false
 </ifr:fixedValuesListDefined>
 <ifr:mixedCaseSupported>
 false
 </ifr:mixedCaseSupported>
 <ifr:signedNumber>
 false
 </ifr:signedNumber>
 </ifr:properties>
 <ifr:definition>
 <ifr:type>
 CHAR
 </ifr:type>
 <ifr:abapType>
 C
 </ifr:abapType>
 <ifr:length>
 10
 </ifr:length>
 <ifr:internalLength1>
 10
 </ifr:internalLength1>
 <ifr:internalLength2>
 20
 </ifr:internalLength2>
 <ifr:decimals>
 0
 </ifr:decimals>
 <ifr:outputLength>
 10
 </ifr:outputLength>
 </ifr:definition>
 </ifr:scalarType>
 </ifr:definition>
 <ifr:properties>
 <ifr:direction>
 in
 </ifr:direction>
 <ifr:class>
 import
 </ifr:class>
 <ifr:type>
 scalar
 </ifr:type>
 <ifr:optional>
 true
 </ifr:optional>
 <ifr:basedOnDictionaryReference>
 true
 </ifr:basedOnDictionaryReference>
 </ifr:properties>
 </ifr:parameter>
 <ifr:parameter name="CNO">
 <ifr:descriptor>
 <ifr:description language="EN">
 Character Field Length = 10
 </ifr:description>
 </ifr:descriptor>
 <ifr:definition>
 <ifr:scalarType name="CHAR10">
 <ifr:properties>
 <ifr:helpValuesSupported>
 false
 </ifr:helpValuesSupported>
 <ifr:fixedValuesListDefined>
 false
 </ifr:fixedValuesListDefined>
 <ifr:mixedCaseSupported>
 false
 </ifr:mixedCaseSupported>
 <ifr:signedNumber>
 false
 </ifr:signedNumber>
 </ifr:properties>
 <ifr:definition>
 <ifr:type>
 CHAR
 </ifr:type>
 <ifr:abapType>
 C
 </ifr:abapType>
 <ifr:length>
 10
 </ifr:length>
 <ifr:internalLength1>
 10
 </ifr:internalLength1>
 <ifr:internalLength2>
 20
 </ifr:internalLength2>
 <ifr:decimals>
 0
 </ifr:decimals>
 <ifr:outputLength>
 10
 </ifr:outputLength>
 </ifr:definition>
 </ifr:scalarType>
 </ifr:definition>
 <ifr:properties>
 <ifr:direction>
 in
 </ifr:direction>
 <ifr:class>
 import
 </ifr:class>
 <ifr:type>
 scalar
 </ifr:type>
 <ifr:optional>
 true
 </ifr:optional>
 <ifr:basedOnDictionaryReference>
 true
 </ifr:basedOnDictionaryReference>
 </ifr:properties>
 </ifr:parameter>
 <ifr:parameter name="BANK">
 <ifr:descriptor>
 <ifr:description language="EN">
 test bank type
 </ifr:description>
 </ifr:descriptor>
 <ifr:definition>
 <ifr:complexType xmlns:xlink="http://www.w3.org/1999/xlink" name="ZST_CUST" type="structure" xlink:role="type" xlink:href="/Content?TYPE=type&NAME=ZST_CUST" />
 </ifr:definition>
 <ifr:properties>
 <ifr:direction>
 inout
 </ifr:direction>
 <ifr:class>
 tables
 </ifr:class>
 <ifr:type>
 structure
 </ifr:type>
 <ifr:optional>
 true
 </ifr:optional>
 <ifr:basedOnDictionaryReference>
 true
 </ifr:basedOnDictionaryReference>
 </ifr:properties>
 </ifr:parameter>
 </ifr:parameters>
 </ifr:definition>
 </ifr:container>
 </wsdl:operation>
 </wsdl:binding>
</wsdl:definitions>

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

1:N mapping without using BPM -- IDOC to multiple files

Hi all,
I am facing a problem while sending multiple files,
I need to send files ( File1, File2 or FIle3) ...
I was able to successfully send the first 2 files and along with it the 3rd file is being created without any data... How to stop this file( either file2 or file 3 should be created) in creating..
I have done the sceanrio like this, )ALL the source and target files are XSD's imported)
In the Message Mapping Messages Tab
Source is AFS_DELVRY03 occurence is 1,
Target files
rootI8 occurence is 1,
rootI9 occurence is 0...1,
rootIB occurence is 0...1
I have done all the maping part , problem is all 3 files are being created(eventhough 2nd or 3rd has no data) , I need rootIB, either rootI9 or rootIB based on condition,
So any one has done the similar scenario, If please suggest me how to hadnle so that only 2nd or 3rd file should be created,
In Interface Determination i have selected the extended option also...
Should i do any specific handling in the Configuration part or should i create more than one mapping?..
U r suggestions are welcome and will be rewarded with points,
Regards,
sridhar

Venu,
Using a BPM, you can do the mapping / Split as needed and then send the files individually, using a Sens Step as needed. There are multiple ways in which this can be done with a BPM.
But, for a solution without a BPM, as the requirement is such that only 2 of the 3 target messages need to be created, multimapping would not work and the need for conditional routing occurs.So, this would require additional mappings.
The solution is either use a BPM or do the logic using Conditional Routing. Ofcourse the second solution requires 3 mapping programs , but you are avoiding a BPM which can cause a perfromance bottle neck.
If perfromance cannot become a bottle neck, then using BPM would make much more sense , but again it all boils down to the exact requirements and the feasibilty of the solutions!
Regards,
Bhavesh

Multiple IDocs to File using BPM

Hi All,
I have configured a scenario of multiple IDocs to file using BPM. In this scenario while I am triggering IDoc from R/3 system it is sent to the external program. I am getting in the status record of WE05 as IDoc is sent to an external system with status code 03. But I am unable to view the same message in moni of the XI system.
Also I have checked the ALE settings on both the sender and receiver side and it is fine.
Also in SM58 nothing is there in queue.
Can anyone solve this issue of mine?
Cheers,
Neethu.

Hi,
in many cases it's a problem with the RFC connection. You should try an authorization test in SM59 of the R/3 system.
This might also be useful:
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Patrick

One sender n multiple receiver for BPM

Hi,
In BPM ( one sender to Multpli receivers ( file to IDOC ) i need to split the incoming message as per message content to multiple receivers,can we achive such scenario without using BPM?if yes how? if not why?
Thanks in advance.

Ginger
Without using BPM, it is also possible:
There are two type of splitting scenario:
1. One type of source message split to multiple messages of same type:
In this scenario, it is very easy to handle multiple receivers, you just need to add additional receivers (without conditions) in your receiver determination
2. One type of source message split to messages of different types:
In this scenario, there are two sub scenarios: the first sub-scenario just have one receiver, and second sub-scenario have multiple receivers. In your case, it seems that you have second sub-scenario:
You can also have just one receiver determination, you can add mutiple receivers in your receiver list,based on XPATH conditions, to judge one unique node for each type of message, e.g. /MT_MyMsg/Root/Resource using operator "EX", it means exists.
Hope this give you some idea.
Liang

Sending email to multiple address using Utl_Smtp

Hi,
I want to send email to multiple address using the Utl_Smtp feature.
When I am sending email to one email address in the To:Field it works fine.However, when I send
to multiple address I am getting the below error.I am using a table(Email_test) to store all email id.
Error report:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at line 48
29279. 00000 - "SMTP permanent error: %s"
*Cause: A SMTP permanent error occurred.
*Action: Correct the error and retry the SMTP operation.
I am trying two options both ways I am getting error
Option 1:
Selecting two email id indivually in the select query as below
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
Option 2:
Is there a way to use option
select email into v_Recipient1 from Email_test where Key_name='U4';
===========================================================
Create table Script
===========================================================
create table Email_test (Email varchar2(100),Key_name varchar2(10));
insert into Email_test values ('[email protected]','U1');
insert into Email_test values ('[email protected]','U2');
insert into Email_test values ('[email protected]','U3')
insert into Email_test values ('[email protected];[email protected];[email protected]','U4');
select * from Email_test
[email protected] U1
[email protected] U2
[email protected] U3
[email protected];[email protected];[email protected] U4
select * from Email_test where Key_name in ('U1','U2','U3')
[email protected] U1
[email protected] U2
[email protected] U3
select * from Email_test where Key_name='U4'
[email protected];[email protected];[email protected]
=======================================================
PL/SQL Block
===========================================================
declare
v_From VARCHAR2(80) := '[email protected]';
v_cc VARCHAR2(80);
v_Recipient VARCHAR2(80) ;
v_Recipient1 VARCHAR2(80) ;
v_Recipient2 VARCHAR2(80) ;
v_Subject VARCHAR2(80);
v_Mail_Host VARCHAR2(50);
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
begin
--Mail Host name
select VALUE into v_Mail_Host from Server_info where server_name = 'SMTPServer';
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
--for CC
select email into v_cc from Email_test where Key_name='U3';
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_cc); -- To CC recepient
utl_smtp.Rcpt(v_Mail_Conn, v_BCC); To BCC recepient
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'Cc: ' || v_cc || crlf ||
'Content-Type: text/html;' ||crlf ||
--'Hello this is a test email');
crlf || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf );
utl_smtp.Quit(v_mail_conn);
end;
Any suggestion how to approach this issue.
Thank you

Simple Mail Transfer Protocol RFC 5321 specifications.
 RCPT TO:<forward-path> [ SP <rcpt-parameters> ] <CRLF>
 The first or only argument to this command includes a forward-path
 (normally a mailbox and domain, always surrounded by ">" and "<"
 brackets) identifying one recipient.In other words, you can only define a SINGLE mailbox address at a time. Multiple addresses requires multiple repeats of this command verb, once per maibox.
Do not confuse this and the To: tag line in the Mime header that contains a comma delimited list of recipients. That tag line can contain anything - it is not parsed, not checked, and not verified as matching the actual recipient mailboxes as specified via the RCPT TO verb.

How can I send a message to multiple contacts using "groups".

How can I send a message to multiple contacts using "groups".
It was easy on my sony ericssonn....do i need to download an app?

There is no group send option like you are looking for.
To send to a group you have to pick each person you want to send to and send as a group that way. Then don't delete that SMS thread and you can reuse it again later.
As for an app, well SMS works via your carrier and the OS, not something an App can do unless the app send the data to them (a third party) and then they relay it to the carrier. Do you really want to be sending your SMS to some 3rd party first?

Multiple sender - Using BPM

Similar Messages

Maybe you are looking for