Sending the fault message payload to sender using BPM.

I have the scenario where BPM splits a file into multiple record and each record calls webservice.
For a successfull call a success response is generated by web service . For a failed transaction a fault message is sent back which needs to be delivered to the sender's mail ID.
I am not able send the fault message payload which contains the error message details to sender ..
Please suggest what can be done for such a scenario. Is there any way by which error details can be sent to sender?
Edited by: trisha.b on Nov 28, 2010 7:23 PM
Edited by: trisha.b on Nov 28, 2010 7:29 PM

Hi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil

Similar Messages

The Air Drop Icon is not available. Cannot send or receive messages from anyone not using Messenger.

I have checked to see that my iPad is using the latest software available and it is. I have followed on-line directions to access Air Drop, but I do not have the Icon for it anywhere.
I am not able to send or receive messages to anyone not using Messenger. Thee Apple page says I should be able to.
Any help appreciated.

Yes, it is 2 questions.
My iPad is Model MC763LL/A - I hope that is the answer! I do have Blue Tooth on. I am not connected to WiFi, but am on Cellular Data here. That should not have a bearing on the icon being loaded, should it?

BPM synchronous send step - Fault message extraction

Hello Experts,
I am developing a BPM with Asynch RFC -> synch Webservice -> Asynch RFC scenario.
I have defined fault message in the synchronous interface used in the send step for web service, and also defined
exception branch where an alert is thrown.
In the alert, i want to send the fault text from the fault message. How can i do that??
Thanks

Hi Mona,
SOAP adapter doesnt support fault messages.
check stephan's reply @ How catch the SOAP Fault Message ?
> SOAP adapter does not support fault message.
> Any fault is treated as error.
> fault messages are only supported for XI messages (ABAP or Java proxies) and RFCs.
Fault message handling is not possible inside BPM.

ALSB 3 roll back a transaction without sending a fault message

Hi,
I have a proxy service exposed as a web service, which has some operations that call some tuxedo systems, do some transformation of the data, etc.
When any of it's operations is invoked I have to build an XML reply in both success AND error cases. The difference between both is a response code, if the call to the backend tuxedo system responded with a stream that starts with OK then everything is fine and I build the reply and send it back, but if an error ocurred it will send back an stream that starts with ER followed by an error code, with which I will have to build the SAME XML but using this error code and send it back to the client instead as a "successful" invocation instead of sending a SOAP fault message. Also I need to roll back the whole transaction in that error case. The system works like that and it can't be changed, we are building this proxy service based on a WSDL file given to us by the partner company that invokes our service and there's lots of other clients that do it in the same way. The problem is that I haven't found a way to roll back the transaction without making the proxy service send a fault message that the client system won't understand. The "Raise error" and "Reply with failure" do roll back the transaction but both send a fault message. Is there a way to answer "successfully" to the client but make an explicit rollback?

Hi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil

Correct and re-send the error messages in PI

Hi everyone,
Today when iam monitoring my PI i found error like some objects missing in the que, I toublshooted it by using inbount xml payload and found the error and cunsulted the user he asked me to correct and re-send the error messages. as iam really new to PI monitoring i really dont know how to correct and re-send the error messages in PI, can any one please help me with it.
Thanks in advance

When you send the messages from RWB-->Component Monitoring ->Integration Engine>test message, runtime parameters like Sender System, Receiver system, Adapter specific message attributes won't carry any values. If you are using any of these paramters in the mapping step,, the mapping will fail.
I think in your case, RFC look up would have been configured based on Sender Business system/Service. but when you send message from RWB, the value for this field is empty. So that is why it is failing as the message cannot find the business system and communication channel.
If you use the sender file name, server name or any other parameters in the message mapping, then message will fail in the message mapping step. That is the major set back in RWB-->Test message.
Reasons:
1)We post messages directly into pipeline step message mapping.
2)The previous pipeline steps are ignored when post messages from RWB such as Receiver determination, routing etc
3)Receiver determination step is responsible to send Sender/Receiver values into the mapping step.
Hope i have clarified your questions

Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeep

Hi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep

What to do?? -What to do?? - I just updated my iTunes to ver 11.2.1 because of the annoying messages they keep sending out. Now I can't play the movies and TV series I've purchased and were watchable before - This movie can be played only on displays that

What to do?? - I just updated my iTunes to ver 11.2.1 because of the annoying messages they keep sending out.
Now I can't play the movies and TV series I've purchased and were watchable before.
Comes up with "This movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection)."
The cheek of the matter is everytime I tried to get Apple support it comes up with a request for me to pay $54 for their support package, to fix a problem I didn't have until I complied to one of their update requests.
End of Rant!!! - Anyone know how to fix please?

Well, I wonder about all the responses...:)
Anyhow, I wound up "fixing" the problem by using the System Restore disks for the Mini. It's now running Tiger 10.4.11 (with all updates) and I copied my iTunes library over. It all works now. <shrug> I have no idea what the problem was, and I'm a bit leery of upgrading it to Leopard, so I think I'll just leave well enough alone.
Richard

Fault message in synchronous send step in BPM

Hi,
When executing a synchronous send step in BPM it is possible to handle application errors (fault messages) with an exception branch. But how do you get hold of the actual data in the Fault message(faultText, faultURL, faultDetail etc) for further processing (mapping)?
Kind regards Johan

Johan,
u have to define another container element in integration process.
For that container element an Async Abstract interface has to created with falult message as the message.
Do u have the fault message defined already...
Also go through this thread.
Fault message handling in BPM
-Naveen.

"Failed to Send the HTTP Message..." - HTTPSupport problem

Hello,
We're having a few difficulties when the HTTPServer in UDS5.0.3 running on Solaris 8. Basically, we have a pair of MS .NET servers using some XML Webservices that we reside on the UDS server.
The symptoms of the problem are that a lot of "Failed to send the HTTP message..." messages are being seen in the log for the partition that contains instances of the HTTPServer. The reason given is a UsageException on the ExternalConnection - stating that the "Object is not open for I/O so it cannot be read or written" (ExternalConnection::Write at 1). This only occurs when a HTTP Response is to be sent back to the .NET server.
Unfortunately, this exception appears to be occurring somewhere within the code held in the HTTPSupport library, so we can't easily trace the error. Worse still, we don't actually know what's causing the error.
Does the error indicate a problem with comms between our UDS HTTPServer and the .NET servers? We've also noticed a large number of socket connections being left in a state of CLOSE_WAIT when this error occurs (which eventually block the port altogether resulting in the HTTPServer instances becoming unresponsive).
As far as I can tell, the Solaris TCP/IP settings are all at the OS default.
Many thanks for any assistance,
Jason Bridgen.

Hi Gordon,
The problem was solved, the customer changed his ip adress on the server and it's OK now!
Thank you !!
Hilla.

Can we send the same message two different recievers with sequence

Hi,
i am sending the same message to two different receviers without using BPM.
now i require to send with sequence.is it possible without BPM?

Hey
There are two options for this
First one is to use Wait step in BPM as other experts suggested.
Second one is a dirty way around,what you can do is send the second message to a dummy receiver first(may be a file on your XI server),then design one bypass scenario which will pick up the file after a specified time interval(give the poling interval you want).
i would go for BPM coz its pretty straight forward,but in case you want to avoid BPM then u can use the second approach
for bypass scenario,have a look at the following
How to send any data (even binary) through XI, without using the Integration Repository

How to send the same message to two SMTP servers

hi,
I need to send a message to two different SMTP servers.
I want to avoid the creation of new MimeMessage with a new Session.
the only way I've found was to keep a reference to the Properties instance that was used in the Session creation, and modify its "mail.smtp.host" property.
Is there another way? I must be missing something.
thanks,
ofer

hi,
I've already found the solution, so I'll post it here.
first I'll explain the purpose:
I needed to send the same message to a normal email server, and (for some of the recipients) to a special SMTP server that is on a different machine.
the following code demonstrate the solution.
thanks for your help.
ofer
----------code---------------
public class MultipleSendTest {
private final static Session server1 = createSession("somesmtp_server.com");
private final static Session _server2 = createSession("another_smtp_server.com");
public static void main(String args[]) throws Exception {
//create the message
MimeMessage m = new MimeMessage(_server1);
m.setText("body text");
m.addRecipients(Message.RecipientType.TO, "[email protected]");
m.setFrom(new InternetAddress("[email protected]"));
//send
send(m, _server1);
send(m, _server2);
private static void send(MimeMessage message, Session session) {
//for logging only
String host = session.getProperty("mail.smtp.host");
try {
Transport transport = session.getTransport("smtp");
transport.connect();
transport.sendMessage(message, message.getAllRecipients());
System.out.println("sent to " + host);
transport.close();
} catch (MessagingException e) {
System.out.println("failed to send to " + host);
private static Session createSession(String host) {
Properties properties = new Properties();
properties.setProperty("mail.smtp.host", host);
return Session.getInstance(properties);
----------code---------------

How can I set up iMessage to ensure the text messages people are sending me arrive both on my computer AND on my iPhone as well?

How can I set up iMessage to ensure the text messages people are sending me arrive both on my computer AND on my iPhone as well?

Use the same ID in Settings > Messages > Send & Receive on both devices and have people use that ID. Your iPhone number would be a good choice.

Zipping multple files and sending the Zipped folder to target location using Biztalk

Hi all,
I have requirement like
Seperate Xml files will be coming as incoming message to Biztalk
Biztalk need to send a zipped folder contining all these xml to target location
any link or component i can use to meet this requiremant plese help
regards,
Vineeth

Create or use the publicly available custom component for unzipping the received message and for send use another component to replace all attachments of a multi-part message
(multiple parts to multiple files to zip) for its zipped equivalent. If not multiple message use any zipping API to zip the multiple
files to zip file and send the zipped file in send port.
BizTalk Pipeline Custom Component Message Unzippper
Zip Files in a Custom Pipeline Component
Multi-Part Message Attachments Zipper Pipeline Component
BizTalk Multipart Message Attachments Zipper is a pipeline component
List of custom Pipeline component you can use
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
CRM Advisor

Send the same message to two receivers with some time difference..

Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .P

Hi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury

Sending the fault message payload to sender using BPM.

Similar Messages

Maybe you are looking for