Multiple service definitions
hi,
i'm working on a prototype in which i want to consume a vended web service. when
i generate the control from the vended wsdl, in the design view of my web service
in workshop, i get a message: "WARNING: test/some.wsdl Line 0, Col 0: WSDL contains
more then one service. Using "SomeService". so unfortunately it appears that
i can not interop with the service without having to go and use client gen for
each service that i need to consume. i looked at the wsdl spec and it appears
that multiple service elements are possible. i would appreciate any recommendations.
thanks,
sean
Hi Dimitri
Here is roughly how the Receiver Determination and Interface Determination objects would look like:-
Receiver Determination
It should be NOT operation specific - either set the SWCV to blank or set the checkbox for "Not Operation Specific". This is because your root node is always <Envelope> (due to the "Do not use SOAP envelope" setting) so it cannot dynamically determine the Operation.
Interface Determination
Here should also be not Operation specific - so set the SWCV to blank.
Similar to the first step, operation cannot be dynamically determined due to root node being always <Envelope>. Therefore use Conditions to select the correct operation mapping and receiver interface/operation.
The condition should be based on the existence of the Xpath of the sender operation, example from Mark's reply above:-
Condition 1 - /p1:Envelope/p1:Body/p2:SenderOperation1_MT EX
Condition 2 - /p1:Envelope/p1:Body/p2:SenderOperation2_MT EX
Then in your OM_Mapping1, you would map from SenderOperation1 to ReceiverOperation1. You can include the XSLT as one of the steps in the OM to retrieve the SOAP header details.
Hope this will be useful.
Rgds
Eng Swee
Similar Messages
-
Multiple ResourceBundle definitions with the same name
I created a new web application project with JSF support using Netbeans 5.5Beta. The new project has a simple welcomeJSF page that I did not modify. The only modifications I did is adding a CustomMessages.properties file under com.mywebsite.resourcs and adding the following entry to faces-config.xml:
<application>
<resource-bundle>
<base-name>com.mywebsite.resources.CustomMessages</base-name>
<var>BundleOne</var>
</resource-bundle>
<locale-config>
<default-locale>en</default-locale>
</locale-config>
</application>Now when I right click welcomeJSF and select Run File, the follow error is added to the log file of SJSAS PE9:
Message ID:
WebModule[/WebApplication1]Exception sending context initialized event to listener instance of class com.sun.faces.config.GlassFishConfigureListener javax.faces.FacesException
Complete Message
Can't parse configuration file: jndi:/server/WebApplication1/WEB-INF/faces-config.xml: Error at line 14 column 27: Error at (14, 27: Multiple ResourceBundle definitions with the same name: BundleOne.
at com.sun.faces.config.ConfigureListener.parse(ConfigureListener.java:1751)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:524)
at com.sun.faces.config.GlassFishConfigureListener.contextInitialized(GlassFishConfigureListener.java:47)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4236)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4760)
at com.sun.enterprise.web.WebModule.start(WebModule.java:292)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:833)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:817)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:659)
at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1468)
at com.sun.enterprise.web.WebContainer.loadWebModule(WebContainer.java:1133)
at com.sun.enterprise.server.WebModuleDeployEventListener.moduleDeployed(WebModuleDeployEventListener.java:171)
at com.sun.enterprise.server.WebModuleDeployEventListener.moduleDeployed(WebModuleDeployEventListener.java:275)
at com.sun.enterprise.admin.event.AdminEventMulticaster.invokeModuleDeployEventListener(AdminEventMulticaster.java:954)
at com.sun.enterprise.admin.event.AdminEventMulticaster.handleModuleDeployEvent(AdminEventMulticaster.java:941)
at com.sun.enterprise.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:448)
at com.sun.enterprise.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:160)
at com.sun.enterprise.admin.server.core.DeploymentNotificationHelper.multicastEvent(DeploymentNotificationHelper.java:296)
at com.sun.enterprise.deployment.phasing.DeploymentServiceUtils.multicastEvent(DeploymentServiceUtils.java:203)
at com.sun.enterprise.deployment.phasing.ServerDeploymentTarget.sendStartEvent(ServerDeploymentTarget.java:285)
at com.sun.enterprise.deployment.phasing.ApplicationStartPhase.runPhase(ApplicationStartPhase.java:119)
at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:95)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:871)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.start(PEDeploymentService.java:541)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.start(PEDeploymentService.java:585)
at com.sun.enterprise.admin.mbeans.ApplicationsConfigMBean.start(ApplicationsConfigMBean.java:719)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.admin.MBeanHelper.invokeOperationInBean(MBeanHelper.java:353)
at com.sun.enterprise.admin.MBeanHelper.invokeOperationInBean(MBeanHelper.java:336)
at com.sun.enterprise.admin.config.BaseConfigMBean.invoke(BaseConfigMBean.java:448)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at sun.reflect.GeneratedMethodAccessor23.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.enterprise.admin.util.proxy.ProxyClass.invoke(ProxyClass.java:77)
at $Proxy1.invoke(Unknown Source)
at com.sun.enterprise.admin.server.core.jmx.SunoneInterceptor.invoke(SunoneInterceptor.java:297)
at com.sun.enterprise.admin.jmx.remote.server.callers.InvokeCaller.call(InvokeCaller.java:56)
at com.sun.enterprise.admin.jmx.remote.server.MBeanServerRequestHandler.handle(MBeanServerRequestHandler.java:142)
at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.processRequest(RemoteJmxConnectorServlet.java:109)
at com.sun.enterprise.admin.jmx.remote.server.servlet.RemoteJmxConnectorServlet.doPost(RemoteJmxConnectorServlet.java:180)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)Go ahead and doubt if it makes you feel superior.
For others:
If your pom has this:
<dependency>
<groupId>javax.faces</groupId>
<artifactId>jsf-api</artifactId>
<version>${jsf.version}</version>
</dependency>
<dependency>
<groupId>javax.faces</groupId>
<artifactId>jsf-impl</artifactId>
<version>${jsf.version}</version>
</dependency>
where jsf.version = 1.2, change jsf.version to 1.2_10 -
How to use ZendAMF with multiple services?
I followed Mihai Corlan's tutorial (http://corlan.org/2008/11/13/flex-and-php-remoting-with-zend-amf/) to create a remote service with Zend AMF, and it works great.
But, I can't figure out how to use multiple RemoteObjects. I keep getting the infamous:
faultCode:Client.Error.DeliveryInDoubt faultString:'Channel disconnected' faultDetail:'Channel disconnected
before an acknowledgement was received'
I set up my second RemoteObject the same way that I set up my first one. But, I can't get it to work.
Any suggestions? Has anyone seen examples of multiple services being used?
Thank you!
-LaxmidiI made a stupid php error.
If you can do a single remote, you can do multiple ones. It's straightforward.
-Laxmidi -
Create service definition failed while creating a Web Service
Guru,
I am trying to develop a Web Service in ECC 6.0 SR3, AIX 5.3+Oracle 10g.
The followings are my steps:
1. Create function module, e.g. Z_RFC_DEMO
2. Activate this function module and also try to run it. It's working.
3. Then use SE37, Utilities -> More Utilities -> Create Web Service -> From the Function Module, and filles what it really needs to fill. After clicking the complete button, it reports "No Vendor Specified".
4. From SE80, when activate the Service Definition manually, it reports the same error.
Is there any body can help me to solve this problem?
Thanks Advance.Guy,
Thanks for your reply.
This problem has been solved. Since I haven't turned on everything that to use transaction SOAMANAGER needs. After complete the switch-on works, the problem never happens again.
Thanks again. -
Solution Manager does not get service definitions from SAP in self diagnosi
Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
RussHi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi -
Multiple Service Products in Service Order ?
Hi,
I have the follg business process:
A customer sends, say, 1000 Pieces of a Product A for repair. Problem in each Piece may be different - some may require just cleaning, some may require Parts replacement etc., which is known only after carrying out the repair.
The Customer has fixed Service Charges based on the nature of repair undertaken (level of repair) and Parts consumed.
I have created Service Products (Mat Type DIEN) for each level of repair. I created Repair Order (Type RAS) and inwarded the 1000 Pieces.
Should we have Service Order for each Piece i.e., 1000 Service Orders ? Or is it possible to enter multiple Service Products and Qty ?
Thanks.
RajHi Prasanth,
The level of Repair (Service Product) is determined based on 'Action Code (code to denote the action taken to rectify the problem in the Product)'. It is also imperative that the Technician should be allowed to select only those Components / Parts allowed for the Service Product.
Action carried out to repair is codified and is known only after repair. Hence segregating qty for each Service Product in the Repair Order itself is not possible here.
Is there a better approach to handle this business process ?
Raj -
PO With respect to realse order with Multiple Item and Multiple Services
Dear Guru,
I am having Issues with BAPI_PO_CREATE1 which i am not able to resolve.
I am Trying to create a PO with Multiple Line (such as line item 10, 20, 30, 40 )
and Each line item should contain multiple services in its service line item (such as 10, 20 30, 40)
The Import parameters i have defined for
POHEADER is as below:
COMP_CODE 1000
DOC_TYPE RO
CREATED_BY SAIFUR
PURCH_ORG 1000
PUR_GROUP 102
CURRENCY INR
DOC_DATE 05.12.2009
AGREEMENT 4700014635
The Import parameters i have defined for
POHEADERX is as below:
COMP_CODE X
DOC_TYPE X
CREATED_BY X
PURCH_ORG X
PUR_GROUP X
CURRENCY X
DOC_DATE X
AGREEMENT X
The Table Parameter I have Defiend For 1st line item
in POITEM is as below :
PO_ITEM 00010
SHORT_TEXT HIRING OF COMPUTER / LAPTOP
PLANT 078
TRACKINGNO ITEM1
QUANTITY 1.000
ITEM_CAT 9
ACCTASSCAT U
AGREEMENT 4700014635
AGMT_ITEM 00010
PREQ_NAME 127562_B
PERIOD_IND_EXPIRATION_DATE D
PCKG_NO 0000000001
The Table Parameter I have Defiend For 2nd line item
in POITEM is as below :
PO_ITEM 00020
SHORT_TEXT HIRING OF LCD
PLANT 078
TRACKINGNO ITEM2
QUANTITY 1.000
ITEM_CAT 9
ACCTASSCAT U
AGREEMENT 4700014635
AGMT_ITEM 00020
PREQ_NAME 127562_B
PERIOD_IND_EXPIRATION_DATE D
PCKG_NO 0000000000The Table Parameter I have Defiend For 1st line item
in POSCHEDULE is as below :
PO_ITEM 00010
SCHED_LINE 0001
DEL_DATCAT_EXT D
DELIVERY_DATE 05.12.2009
QUANTITY 1.000
The Table Parameter I have Defiend For 2nd line item
in POSCHEDULE is as below :
PO_ITEM 00020
SCHED_LINE 0002
DEL_DATCAT_EXT D
DELIVERY_DATE 05.12.2009
QUANTITY 1.000
The Table Parameter I have Defiend For 1st line item
in POSCHEDULEX is as below :
PO_ITEM 00010
SCHED_LINE 0001
DEL_DATCAT_EXT X
DELIVERY_DATE X
QUANTITY X
The Table Parameter I have Defiend For 2nd line item
in POSCHEDULEX is as below :
PO_ITEM 00020
SCHED_LINE 0002
DEL_DATCAT_EXT X
DELIVERY_DATE X
QUANTITY X
The Table Parameter I have Defiend For 1st and 2nd line item
in POSERVICES is as below :
PCKG_NO LINE_NO EXT_LINE SUBPCKG_NO QUANTITY BAS GR_PRICE SHORT_TEXT
1 1 0 2 0 0 HIRING OF COMPUTER / LAPTOP
2 2 10 0 1 EA 700 PENTIUM COM WITH COL MON & NETWORK COM
2 3 20 0 1 EA 350 INKJET PRINTER(BLACK&WHITE AND COLOUR)
2 4 30 0 1 EA 325 SCANNER COLOUR
5 5 0 5 0 0 HIRING OF LCD
5 6 10 0 1 HR 400 LCD HIRING PER HOUR
5 7 20 0 2 HR 200 FOR EVERY ADDITIONAL HOUR -
BAPI_PO_CREATE1 for Multiple service line items
Hi Exports,
I am using BAPI_PO_CREATE1 to create service PO. I am facing problem when each line item(ebelp) has multiple service line items. I am unable to map multiple service line items to a single line item (ebelp) properly.
Can anyone help.
Regards,
KiranHi ,
I am able to create service PO when only one service line item is there.
If multiple service line items are there. then i have to put the below code with in the loop.
here i am facing the probelm.
w_poservices-pckg_no = g_pckg.
w_poservices-line_no = g_pckg.
w_poservices-outl_ind = c_x.
w_poservices-subpckg_no = g_pckg + 1.
w_poservices-service = w_sdata-srvpos.
w_poservices-short_text = w_idata-ktext1.
w_poservices-quantity = w_idata-menge.
w_poservices-base_uom = w_idata-meins.
w_poservices-gr_price = w_idata-tbtwr.
w_poservices-matl_group = w_idata-matkl.
APPEND w_poservices TO i_poservices.
CLEAR: w_poservices.
w_poservices-pckg_no = g_pckg + 1.
w_poservices-line_no = g_pckg + 1.
w_poservices-ext_line = 0000000010.
w_poservices-outl_ind = c_x.
w_poservices-subpckg_no = g_pckg + 2.
w_poservices-service = w_sdata-srvpos.
w_poservices-short_text = w_sdata-ktext1.
w_poservices-quantity = w_sdata-menge.
w_poservices-base_uom = w_sdata-meins.
w_poservices-gr_price = w_sdata-tbtwr.
w_poservices-matl_group = w_idata-matkl.
APPEND w_poservices TO i_poservices.
CLEAR: w_poservices.
w_posrvaccessvalues-pckg_no = g_pckg + 1.
w_posrvaccessvalues-line_no = g_pckg + 1.
w_posrvaccessvalues-serno_line = 01.
w_posrvaccessvalues-serial_no = 01.
w_posrvaccessvalues-quantity = w_idata-menge.
APPEND w_posrvaccessvalues TO i_posrvaccessvalues.
thank you.
Regards,
Kiran -
Service PO with Multiple service Line Items
Hi,
i am working on Service Po Creation by using BAPI BAPI_PO_CREAT1. I am able to create service for multiple line items but the problem is single line item my have multiple service line items in that case my object is not working. Can any one suggest solution for this.Here i am attachng what i written logic
T_POITEM-PCKG_NO = V_PACKNO.
T_POSERVICE-PCKG_NO = V_PACKNO. "'0000000001'.
T_POSERVICE-LINE_NO = V_LINENO. "'0000000001'.
T_POSERVICE-OUTL_IND = 'X'.
T_POSERVICE-EXT_LINE = '0'. "V_EXTLIN. "'0'.
T_POSERVICE-OUTL_LEVEL = '0'. "V_EXTOUT. "'0'.
T_POSERVICE-SUBPCKG_NO = V_PACKNO + 1. "'0000000003'. "(Dummy No.)
T_POSERVICE-QUANTITY = ITAB-SERV_QUANTITY.
T_POSERVICE-BASE_UOM = ITAB-BASE_UOM.
T_POSERVICE-PRICE_UNIT = '1'.
T_POSERVICE-GR_PRICE = ITAB-GR_PRICE.
T_POSERVICE-SHORT_TEXT = ITAB-SERV_TEXT. "'SERVICE TEST'.
APPEND T_POSERVICE.
V_LINENO = V_LINENO + 1.
* V_PACKNO = V_SUBPACKNO.
T_POSERVICE-PCKG_NO = V_PACKNO + 1.
T_POSERVICE-LINE_NO = V_LINENO.
T_POSERVICE-EXT_LINE = V_EXTLIN + 10. "'0'.
T_POSERVICE-OUTL_LEVEL = '0'. "V_EXTOUT. "'0'.
T_POSERVICE-OUTL_IND = SPACE.
T_POSERVICE-QUANTITY = ITAB-SERV_QUANTITY.
T_POSERVICE-SUBPCKG_NO = '0000000000'.
T_POSERVICE-BASE_UOM = ITAB-BASE_UOM.
T_POSERVICE-PRICE_UNIT = '1'.
T_POSERVICE-GR_PRICE = ITAB-GR_PRICE.
T_POSERVICE-SHORT_TEXT = ITAB-SERV_TEXT. "'SERVICE 1'.
T_POSERVICE-PLN_PCKG = V_PACKNO + 1.
T_POSERVICE-PLN_LINE = V_LINENO.
* T_POSERVICE-MATL_GROUP = '0082'.
APPEND T_POSERVICE.
* SET PCKG_NO AS SUB_PCKG_NO IN TABLE POSRVACCESSVALUES THIS:
T_POSERVALUE-PCKG_NO = V_PACKNO + 1. "'0000000003'.
T_POSERVALUE-LINE_NO = V_LINENO.
T_POSERVALUE-SERNO_LINE = '01'. "'01'.
T_POSERVALUE-SERIAL_NO = '01'. " '01'.
T_POSERVALUE-QUANTITY = ITAB-SERV_QUANTITY. "'10.000'.
APPEND T_POSERVALUE.by following instructions in 420332 note.
-
Multiple Service Entry Sheet For PO Line Items and One GR Document
Dear All,
We have just migrated from ECC 5.0 System to ECC 6.0 System. We are facing a problem while processing service entry sheets and the GR against them. The scenario is:
1. We create a maintenance plan
2. Upon saving the Maintenance Plan, a Purchase Requisition (PR) is generated
3. The PR's are combined into one Purchase Order
4. Against the Purchase Orders, multiple service entry sheets are created
In ECC 5.0 System, we used to accept the service entry sheets and only one material document used to get generated as GR document. But now in ECC 6.0, we observe that with the same configuration, individual material documents are getting generated for individual service entry sheets. Is there a configuration in ECC 5.0, that enables clubbing of service entry sheet items in one GR document?
Your help will be sincerely appreciated.
Thanks and Sincere Regards,
AmitabhaHi,
If this can be of help I can report the list of the programs that
are executed:
Before the popup "FUNCTION POPUP_TO_CONFIRM_STEP" appeares in ML81N,
following programs are executed:
5 FUNCTION POPUP_TO_CONFIRM_STEP SAPLSPO1
4 FORM SELECTION_CHANGED_PO SAPLMLSR
3 FORM FCODE_SEL_PO SAPLMLSR
2 FORM FCODE SAPLMLSR
1 MODULE (PAI) FCODE SAPLMLSR
Unfortunately at this time it is not planned to change the current
functionality.
Regards,
Edit -
Configuring multiple services in a single instance database
Dear All,
I would like to create multiple service names for a single instance oracle database (10.2.0.3 on IBM - AIX 6.1). I tried searching on the net, reading documentation, and also on the metalink but couldn't find anything relevant to single instance database.
Say I have two users, userA and userB, for which I would like to use two services (ServA and ServB) to connect to the same single instance database.
Any help in this direction is appreciated.
RegardsOracle Lover3 wrote:
Thanks for your quick solution.
By the time you answered I was able to locate it in the documentation. I have tested it and its working perfectly. Here's the documenation link.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams188.htm#i1133481
It is very hard to believe you didn't find this in the documentation, and my suspicion is you didn't search for it at all.It is very hard to believe that you don't trust others and end up in suspicion. I wish you were sitting next to me while I was searching for the link/document.It is because the vast majority of doc questions are asked by people who don't read the docs at all.
Now, I'm curious about your requirement. While it can be done, it is pretty unusual. That always leads me to want to step back from the technical question and ask What business problem is this solving? -
Step 2 in the Note 727998 - Complete Replacement of Service Definitions
Hi all ,
I follow this note to replacement of service definitions in my solution manager system.
In the step2, i have some questions in the following actions:
SDCCN:
Delete any task 'Maintenance Package' in the 'To do' tab.
Ensure that no connection to SAP is maintained in:
SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
This means that only NONE exist in the table ?
Ensure that connection 'NONE' is maintained, and that the 'master' flag is set.
Create a new periodic task 'Maintenance Package'.
If only one RFC 'NONE' in RFC destinations, when i create new task 'Maintenance Package'
it will show "No destination to SAP or a master SAP Solution Man", even if i have set the NONE to master SAP solution Manager".
Please give advices.
BR
WuJust create SDCC_OSS, it can work fine.
-
Percentage wise Confirmation for Multiple Service line items
Hi,
Percentage wise Confirmation for Multiple Service line items
During doing service entry sheet am able to do % wise confirmaion from
Menu -> Entry Sheet -> Create -> With Planned Service -> Enter Percent.
But this works only for single line item the first line.
If we have multiple line items & if i give 10%, It calculates 10% for
all items.
We want Line wise % confirmation can be given as % confirmation will differ from
line to line.
Thanks
ShashankDear ,
This percentage is a header data i.e applicable for all service items
F1 help clearly says
Percentage quantity to be adopted
Use
If you wish to adopt the planned services from the purchase order, you
can enter an additional percentage in this field in order to have that
percentage adopted instead of the total quantity shown in the purchase
order.
Example:
Quantity specified.............Quantity to be adopted:.............Quantity specified "
in purchase order:....................... 10 %..................................entry sheet:
Service 1.......100 pc ................................................................10 pc
Service 2.......200 m ............................................................... 20 m
Service 3. .....30 h ................................................................. 3 h
Edited by: redriver on Jan 22, 2012 6:50 AM -
How do I set a multiple Services Dashboard?
Hello!
I'm on Oracle EM11g setting up some systems and services. I was reading this doc page and saw that awesome dashboard to see multiple services at the same time. However, I don't understand how can I set up a dashboard like that, plus the photo shows its from EM 10g so I'm not sure if I'm running in circles for something I can't accomplish in 11g.
Cheers,
NockHi Nock,
It's certainly something you can accomplish in 11g, the reports can be accessed/created and edited from the information publisher reports option in your main menu. documentation for it can be found here: Information Publisher
R, Jurgen -
ISG does not send Access-Request to download service definition
Hi guys,
I got these configs on my ISG and when I see the packets between AAA and ISG router, there's no access-request for downloading the service definition!
policy-map type control PPPoE_MAIN_POLICY
class type control always event session-start
10 authenticate aaa list PPPoE_AUTHE
15 authorize aaa list PPPoE_AUTHO password cisco identifier source-ip-address
20 service local
class type control always event service-start
5 collect identifier source-ip-address
10 service permit
20 service-policy type service identifier service-name
30 log-session-state
class type control always event account-logon
service-policy type control PPPoE_MAIN_POLICY
And here's the picture of Access-Accept with bunch of specified not-cached services
Any idea I appreciate it in advance.Hi,
Could you share your full config? It would be good to check your AAA config since that will influence how service profiles are downloaded.
Also, could you briefly explain the goal of your config? Do you simply want to apply services "SRV_INTERNET_PRIMARY" and "SR_INTERNET_128K_5G" via autosevice?
Regards
Maybe you are looking for
-
Need help about PDF conversion
I have red words in a text box using publisher. How come the text show up as black after PDF conversion in Adobe?
-
One of our reports has lots of text in some rows. I import the data, adjust the row width and ask the text to wrap, which automatically sets the row height appropriately. When I save, close, and open that spreadsheet, the width is still the same and
-
How do i get the license of Adobe Illustrator CS5 from my hold PC?
i migrated my Pc from WinXP to Win7 (i have two different HD with the O.S). My question is, how do i get the license of Abode Illustrator CS5 from my hold PC(hard disk with WinXP)? Thanks
-
Implementing Badi: BADI_MAT_CUST_SCR
Hello Experts! I'm trying to insert customer defined fields in material component in CJ20N. I'm implementing Badi: BADI_MAT_CUST_SCR. Customer tab appeared. But next I have some problem: i need to extended 2 methods GET_SCREEN_DETAILS and GET_CUST_FE
-
Since the Quicksilvers don't have an Audio In Port I'd like to know how I could import Audio (analog in this case) to my Quicksilver. Any suggestions would be much appreciated. Thanx. LC III, PM 7600/120, PM 9600/350, G4 Quicksilver/867 Mac OS 9.2.