Step 2 in the Note 727998 - Complete Replacement of Service Definitions
Hi all ,
I follow this note to replacement of service definitions in my solution manager system.
In the step2, i have some questions in the following actions:
SDCCN:
Delete any task 'Maintenance Package' in the 'To do' tab.
Ensure that no connection to SAP is maintained in:
SDCCN-> Goto -> Settings -> Task specific -> RFC destinations.
This means that only NONE exist in the table ?
Ensure that connection 'NONE' is maintained, and that the 'master' flag is set.
Create a new periodic task 'Maintenance Package'.
If only one RFC 'NONE' in RFC destinations, when i create new task 'Maintenance Package'
it will show "No destination to SAP or a master SAP Solution Man", even if i have set the NONE to master SAP solution Manager".
Please give advices.
BR
Wu
Just create SDCC_OSS, it can work fine.
Similar Messages
-
I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?
The 2nd generation can not be upgraded beyond 4.2.1.
-
Notes are blank in Outlook 2013 after updating the note in IOS 8
The setup:
On my computer, Windows 7 and Outlook 2013 (Exchange 2013 on the server side).
I create a new note and close it. I can open it, modify it, and everything works as expected.
On my iPhone 6 with IOS 8.0.2, I go into the same note. Everything looks fine. If I modify it and close it, I can open it and everything looks fine.
Now the issue...When I go back to Outlook on my PC and open the same note (subject/title shows in the list view), the note is completely blank.
So, I go back to my phone and everything still looks ok. If I type in the now blank note on the PC, it overwrites the old note contents.
To make all this even stranger, if I log into OWA, the note is there and works fine through this entire process (well, until I overwrite the contents). But, in OWA, it seems to strip out the subject on certain saves.
I tried all this on another laptop I have lying around and get the same results. I tried a new profile. I tried safe mode. All the same.
This leads me to believe that Outlook 2013 has issues displaying notes. If OWA has the correct info, then the server has the correct info.
Does anyone else have this issue or can try to replicate the issue? Any suggestions on fixing it?
(Original post
here)See if you are hitting the issue mentioned in the article -> http://support2.microsoft.com/kb/2980834/en-us?sd=rss&spid=16662&wa=wsignin1.0
If yes, the fix is with Exchange Server 2013 CU6.
============
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Restart a step in a Job Chain when complete
Hi,
I want to restart a step when complete but I don't see where I can choose how many times I want to restart.
I see the Final Status Handlers : restart step on complete, but this restart the step unlimitedly.
Could someone help, please ?
Re.
Clement.You can create a precondition expression on the step next to the restart on completed to limit the amount of restarts:
'=stepIterations <= 3' to restart the step 3 times.
Regards Gerben -
After making a note in a non wifi environment the note dissappears completely after connecting the Macbook Air to the internet again?
What kind of server are you using to sync Notes, if not iCloud?
-
Hi. I have lost several pages of notes in the iPad notes application on the iPad2. I have read that there may be a way to recover them via an email account, but the posts reference Gmail. My email account is Yahoo. Has anyone successfully recovered mysteriously disappearing notes on the iPad 2 via Yahoo mail? Thanks in advance.
You should be able to recover notes from a backup, if you backup the iPad, but try this first and see if the notes reappear.
Quit the Notes app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
'Not running in a hosted service or the Development Fabric' exception on deployed Worker role
We are getting this exception after a worker role has been operating fine in production for several weeks. Once this exception starts getting reported, it will keep getting it every time the worker role tries to access anything with the Diagnostics:
Not running in a hosted service or the Development Fabric
Note that the role is full trust, and as I mentioned this in in production on the Azure servers, NOT in debug. The worker role itself does some dynamic compilation, for which it needs to start a new AppDomain. It appears that the exception is
coming from the spawned AppDomain when it occurs. The exception itself is triggered on a simple Trace.TraceInformation call.
What could cause this?
What can we do to recover from this?We are getting this exception after a worker role has been operating fine in production for several weeks. Once this exception starts getting reported, it will keep getting it every time the worker role tries to access anything with the Diagnostics:
Not running in a hosted service or the Development Fabric
Note that the role is full trust, and as I mentioned this in in production on the Azure servers, NOT in debug. The worker role itself does some dynamic compilation, for which it needs to start a new AppDomain. It appears that the exception is
coming from the spawned AppDomain when it occurs. The exception itself is triggered on a simple Trace.TraceInformation call.
What could cause this?
What can we do to recover from this?
Hi,
I have tested this situation in Windows Azure platform and i can not reproduce your exception message, my test code in follwoing MSDN samples and i deploy it in Production status.
The MSDN article (include Appdomain code snippets)
http://msdn.microsoft.com/en-us/library/system.appdomain.aspx .
Base on my understand, the "Not running in a hosted service or the Development Fabric" error message occur when Azure Emulator or Azure development fabirc, because you create a new appdomain in WorkRole, and it may cause permission errors, a similar
posts by my research:
https://social.msdn.microsoft.com/Forums/en-US/windowsazuretroubleshooting/thread/50987285-58ac-484e-b604-725fe01a3325
If you still have some problems, please inform me. Thank you.
Please mark the replies as answers if they help or unmark if not. If you have any feedback about my replies, please contact
[email protected]
Microsoft One Code Framework -
Is there a telephone number for live help? I would like to talk to a live person. Shiva on the chat line gave me a link that as no longer in use.
I believe Phone Support is only provided for Cloud inquiries. You should identify the version of Photoshop Elements you are looking for. Here are links for the available downloads...
PSE 12 Trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PSE 7, 8, 9 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 7: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml/comment-page-1#comment-2174
Photoshop/Premiere Elements 8: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
Photoshop/Premiere Elements 9: http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
Photoshop/Premiere Elements 10: http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Photoshop/Premiere Elements 11: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
Photoshop/Premiere Elements 12: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html -
I have down loaded a track which was initially missing 1min 30 seconds. iTunes enabled me to reload the rack which is now complete on the PC. However, syncing with my Ipad2 does not seem to replace the incomplete version with the full version. Can anyone out there help?
Thanks SThanks for the response. Unfortunately, I've un-checked the track and re-synced the Ipad as suggested, but then re-checking and re-syncing han no effect. The track is still missing the final minute and a half or so. I've tried it twice, but the effect is the same.
Any other ideas? Would un-checking the entire music collection and staring again work, or is that a road to disaster? -
HT204406 My iTunes Match will not complete Step 3 of the uploading process. Many songs are "waiting"
My iTunes Match will not complete Step 3 of the uploading process. I have over 700 "items" designated as "waiting." I have restarted multiple times but it stalls at this point.
I've been reading all these comments about how match is not working and people are having problems uploading all their songs. My problem is more basic than that. When I open iTunes I immediately get the spinning color disc of death and I can't do anything at all. I can't go to the store. I can't listen to a song. I can't do anything. I just tried to sync my iPod. I pugged it into my computer, iTunes started up, looked like it was going to sync, then the spinning disc again. So forget match; I can't do anything, nada, nothing. I even tried to send my iTunes application to trash, but I got a message saying I couldn't do that because it was needed for OS X. Talk about a do loop, this is unbelievable.
Is anyone else having the problem I am having? -
Hi all,
Installed WAIK on server 2008 R2 64 bit. I'm setting up some boot images, and am having a real hard time getting drivers to integrate into the driver store in the boot images.
What I'm finding is that when adding drivers to the boot image the gui hangs part way through over 50% of the time using Dell 760 or HP NX9420 drivers extracted to pull out the inf files. It's really flakey and will work after a couple of attempts and when the wind is right.
The main problem is that when the process fails the image is left open, so using dism to list mounted images and then umount the open images is the only way to try again.
However, some images won't unmount and the unmount process displays the following:
C:\Windows\system32>dism /get-mountedwiminfo
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Mounted images:
Mount Dir : C:\Users\davros\AppData\Local\Temp\~$WDSMGMT.000
Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
wim
Image Index : 2
Mounted Read/Write : Yes
Status : Invalid
The operation completed successfully.
C:\Windows\system32>dism /unmount-wim /mountdir:C:\Users\davros\AppData\Local\Te
mp\~$WDSMGMT.000 /discard
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
wim
Image Index : 2
Unmounting image
[==========================100.0%==========================]
Error: 0xc1420117
The directory could not be completely unmounted. This is usually due to applica
tions that still have files opened within the mount directory. Close these file
s and unmount again to complete the unmount process.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Using process explorer shows no running processes that have the files open and the dism.log file shows:
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:75 - CWimImage::Unmount(hr:0xc1420117)
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1068 - CWimManager::InternalOpUnmount(hr:0xc1420117)
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0xc1420117)
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 Error executing command - CWimManager::InternalExecuteCmd(hr:0xc1420117)
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0xc1420117)
2009-12-16 11:49:35, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2009-12-16 11:49:35, Info DISM DISM.EXE:
2009-12-16 11:49:35, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2009-12-16 11:49:35, Info DISM DISM.EXE:
2009-12-16 11:49:35, Info DISM DISM Image Session: PID=5580 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
Rebooting the server clears the lock, but it's really becoming a joke, as I can create a boot image with the drivers, but then going back into add another driver causes the gui to not respond.
Any suggestions gratefully accepted. - Matt.Hi all,
had same problem unmounting the wim file using Windows 7 Pro 32bit.
My solution was: Checking for "wrong" Dism.exe
Preparing a WinPE I followed the steps in the help of AIK. I ran the
copype.cmd batch. When it was finished, it said that it added something
to the path environment variable. It was clear that it did so in order
to find the tools needed for the further steps. As long as everything
worked, I didn't give it a second thought. Then I could not unmount the
WIM.
I looked at the PATH variable: NO entry pointed to the directory where
dism.exe was in. (In my case that would have been
c:\program files\windows aik\tools\x86\servicing
Magically, dism.exe started from everywhere though.
Doing a dir c:\dism.exe /s /a showed I had a Dism.exe in
c:\windows\system32, as well. This one has a file size different from
the correct one. Obviously I had started this one (because PATH points
there).
Starting the correct dism.exe let me unmount the WIM without problems.
Regards,
Robert -
Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).
-
Display burn in - Apple does not want to replace the LCD
Recently my iMac 24” LCD display began to have “screen burn ins“ or image persistence on the LCD. I have done extensive online research about the issue, I tried setting my screensaver to pure white and running the apple screensaver to resolve the issue. I did not use my computer any more extensively than any of my other macs, so the image burn in came as a surprise to me this early in the Mac’s life span. I understand that the issue exists, and would not surprise me if my computer was several years old and it was never turned off. I will have to argue that the “screen burn in” happened too early for my iMac.
I took my iMac to an Apple store and waited to speak with a Genius and have a diagnosis. After the Genius ran his diagnosis he said that I am out of warranty, however he agreed with me that it was too early for something like this to happen. He proposed that my LCD screen would be replaced, and said that he would give me a break and make a “one time warranty exception and not charge me for the new LCD and replacement based on the circumstance.” The genius placed an order for an LCD panel for my iMac, printed out the work order and shook my hand, I was extremely grateful thanked the Genius for making such an exception.
After leaving my iMac in the store for repairs for 5 days, with excitement and anticipation I picked up my iMac which was claimed to be “fixed”. I got home opened up the box and plugged in the iMac and the first thing that I noticed was a dead pixel that I recognized from the old LCD, what are the odds of the new display having a dead pixel in the exact same spot? I called back to the apple store with my repair number at hand and confirmed that my LCD was never replaced.
I thought to myself, maybe they fixed it, but just to be safe I used the computer until I noticed nothing changed the “burn in issue” is still here. So I created a background image in photoshop to purposely leave on for an hour as proof of the problem. I called back to the apple store early in the morning and talked with the technical center, the girl on the phone said “I remember your mac” I thought we had it fixed. I asked to make sure that the LCD that was ordered for the sole purpose of fixing the burn in issue which I had was still at the store, it was confirmed that it was.
I came by the apple store and a different Genius looked at my computer, saw the excessive burn in. He ran the “Flurry” Screen saver, which helped remove the current burn in but was still not fully removed. He then told me that they would not replace the LCD, and that I should set my screen saver to every 5 minutes and lower the brightness to reduce the load on the screen. I argued that even if I can get rid of the problem after running the screensaver for at least an hour, the burn in just keeps coming back, and fast too.
I came home setup the screensaver settings and began using my machine, not using it for even more than an hour I saw the burn ins from the store and some new ones that came from my doc, and finder window and shadow lines distorting the entire screen, almost making it look like mud lines.
I took a few pictures with a DSL camera at the highest resolution, but I am not sure if this shows enough to really show:
Doc burned in:
#1 http://dl.dropbox.com/u/1477936/apple/DSC_0751.jpg (need to make it 100% to see)
#2 http://dl.dropbox.com/u/1477936/apple/DSC_0754.jpg (need to make it 100% to see)
Does any one know what I should do now?Welcome to the Apple Discussions!
I think that regardless that this was a different Genius, the Apple Store has made a commitment to you to repair the iMac out of warranty and should honor this commitment. I would go back to the Apple Store and speak directly to the Store Manager with your original paperwork in hand for the repair that was not completed.
Should you not receive satisfaction from the Store Manager then I would call Apple Care and immediately ask to have your call escalated to a Customer Care representative. Explain the issue to the rep and ask for their assistance in receiving the repair commitment originally made to you by the Apple Store.
Have all necessary paperwork for the committed repair at hand during your phone conversation. Take notes. Get the name and the position of each person to whom you speak. Speak firmly but politely. Do not get angry or make any threats. The minute you mention a lawyer or any other such threat the conversation will be over and Apple will fall back on the fact the Mac is out of warranty and any opportunity of getting a repair will likely be gone.
Dah•veed -
The operation could not be completed because an item with the name xyz already exists
I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
anyone know the cause, or at least a fix?If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
For some other possible solutions, see:
operation can't be completed because an...: Apple Support Communities -
The operation could not be completed because there is not enough space on the destination disk
I have 124Gig of space left on my HD, when I try to export my movie i get this error "The operation could not be completed because there is not enough space on the destination disk" I have read some of the threads went in and deleted the iMovie Preference file but no luck.. any Ideas? Thanks!
You need the System DVDs that originally came w/the computer in order to troubleshoot. All Macs prior to & including ML came w/System DVDs.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.
Maybe you are looking for
-
Windows borked my external drive's partition map
I have two partitions on my 1 TB external drive, a ~750 GB HFS+ partition full of huge files (games, iTunes, etc.) and a 150 GB NTFS partition for Steam games (derp TF2 derp). The hard drive was originally in GPT, but now is in MBR due to Windows bei
-
Smartview Addin upgrade and APS
We are on EPM 11.1.2.600 and APS version is 11.1.2.102 as is the Smartview addin. Business is looking at the feature set in later releases of the Smartview addin, specifically Smart Query and some of the VBA extensions of later versions. We are curre
-
How to identify and remove duplicate plugin effects from AE cs5 please?
hello, i installed some trial plug in effects for AE and PPRO cs5 cycore, boris, trapcode the PPRo went great however, with the AE i get notices that multiple instances of 'such and such' effect is installed more than one time...there's about 15 that
-
The DVD I burned from my camera to a DVD+R will play in my DVD player on my Mac. However, when I try to play it with Quicktime - it plays two seconds of the video w/o sound or I get error message -1401. This is driving me insane. I have MPEG-2 and th
-
My iPad Air crashed after updating latest iOS software. After resetting the system, Pages, Numbers and Keynotes are not available. How do I get the apps back into my iPad?