Multiple Software Versions Question

Rookie question here.  My organization recently purchased a new copy of InDesign CS6 for me and one other employee.  We did NOT purchase Creative Cloud subscriptions, but hard copy licenses.  The software is working great and we love your product.  The problem we are having is in regards to other people in our organization trying to open our newly created InDesign Documents (CS6) with their older version of the software (CS5).  We do NOT have the option to upgrade the CS5 software licenses, so what are our options for those employees with CS5 to be able to view and edit documents created in CS6?  I'm assuming there is a way to save the CS6 documents as older versions, correct?  We all operate Windows PC's.  I greatly appreciate your help.

@Todd – the only way saving back is exporting to IDML from CS6 and open the IDML in CS5.
If this is a reliable workflow is questionable. You have to proofread the opened IDML in CS5. I recommend to export to PDF from CS6 as well and compare the PDF with the opend IDML in CS5.
Uwe

Similar Messages

  • Software Version Question

    I'm a bit lost by the whole issue of the software version, and could do with some explanation.
    I understand the latest version of the software/firmware for the N82 is 20.something, wheras mine is 10.0.046. Running software updater says mine is the latest version.
    Why is this? Is it possible to install a more recent version somehow?
    Only reason I ask is that I have been having some unpleasant stability issues with my N82, and am hoping a more up to date software/firmware will fix some of it.

    Still on the subject of clueless front-line staff, I had an enlightening experience with T-Mobile's yesterday.
    I had 3 queries, none of which were dealt with swiftly and precisely.
    Firstly, I asked whether video calls were included in my contract. There's no indication either way in the literature I found so I suppose you have to assume that they're not. It took the girl about 5 minutes to find the information and get back to me. Even then, she couldn't give me the cost and had to go off for another 2 or 3 minutes to get that information.
    Secondly, if you go to this page it clearly shows that France (where I have many contacts having lived there for ¼ century) is not one of the countries where mobile users can be sent picture messages. I asked what plans there were, if any, to increase the number of networks to which it is possible to send picture messages. The girl was adamant that the person to whom I was trying to send the MMS had incorrect settings in their phone. Then she thought I wanted to know the cost of sending an MMS.
    Finally, I wanted the network unlock code for my phone (so that I can use it with non-T-Mobile SIMs). To start with, she was adamant that it was the PUK code that I was after. Then she thought it was the network migration code. Only after explaining in easy-to-understand, monosyllabic terms what this mysterious code I was after would be used for did she realize what I wanted.
    Some people really shouldn't be in the positions they occupy...
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • My Acrobat 8 Pro is failing to print to a pdf from multiple software.  I get an error message that a repair fixes but only for a little while.  Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a

    My Acrobat 8 Pro is failing to print to a pdf from multiple software.  I get an error message that a repair fixes but only for a little while.  Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a way to buy a valid serial number and then 8 stops working again.  I’d be happy if the 8 I paid for worked right or I could get 9 for a small cost but I cannot afford $450 or $20/month.  I need a permanent solution that I should be already paid for with 8 pro.

    After multiple repair procedures with reboot in AA8 I was eventually able to restore the printing to pdf function from various software.  However I have again lost my Acrobat tab in Outlook 2007.  I need that back, but today an even bigger problem arose.  AA8 has stopped printing to fax.  It faxes a blank page.  The only fax printing option is “Microsoft Shared Fax Driver”.  My fax software is “Windows Fax and Scan” and it was working fine just a couple weeks ago.  My OS is Windows 7 Professional.
    I have tried doing the updates you referred to but I get error messages like these:
    “No qualifying products found to apply this update, or update has been already applied”
    or
    “The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program.  Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.”

  • IPOD Nano - software version 1.0.4 - questions

    How do I transfer songs from my old Ipod with software version 1.0.4?
    how can I purchase songs from Itunes for my Ipod on this version 1.0.4?

    1. Use the Transfer Purchases function in iTunes.
    2. Purchase them normally.
    (79485)

  • Query design question: multiple plan versions in single column

    I have a standard financial statement query with current month "Actual" restricted to Value Type 10 and current month "Plan" using Value Type 20.  This scenario is repeated for year-to-date Actual and Plan along with $ and % variance calculations.   Until recently we were only loading plan version so I had no reason to restrict the plan to version 0 Actual/Plan.
    We are now loading an alternate plan version, Version 1, and I would like to report both versions in the same query.  I though I could just bring in "Version" as a Free Characteristic to easily switch between version 0 and 1 but that didn't work as expected. 
    With "Version" as a filter item my Plan amount will report both plan versions combined which is fine and when "Version" is filtered to the alternate version 1 Plan correctly displays the alternate amount, in both cases Actual is unchanged and displays correctly.   The problem is when I change the filter to just show Version 0 which is defined as "Actual/Plan".  When version 0 is selected the Plan amount displays correctly but ALL Actual values disappear.
    No Version filter set = Actual/Plan and Plan Version 1 combined correctly.   Actual displays correctly.
    Filter set to 1 and 0  = Actual/Plan and Plan Version 1 combined correctly.   Actual displays correctly.
    Filter set to 1 = Plan Version 1 only.  Actual displays correctly.
    Filter set to 0 = Plan Version 0 only.  No actual data is displayed.
    Is there a better way of displaying multiple plan versions in a query or will I have to add additional columns for each plan version?
    Thanks for the ideas,
    Jeff

    Thanks Amit that was the help I needed.
    I added "Version" to every actual Key Figure and made each a Constant Selection.  I also added Version as a Free Characteristic of the query for a filter.
    By adding Version to each Key Figure no matter which plan version I select in the Version filter Actual data alway remains correct and just my Plan column changes to show the plan version I selected.
    Thanks for your help,
    Jeff
    Edited by: Jeff Mayfield on Nov 11, 2009 11:51 PM

  • When trying to load multiple language versions of an ibook onto my iPad only the first document loads

    We have a sales tool that we have created for one of our clients in iBooks Author. They need the iBook creating in various languages.
    We need to be able to supply the multiple versions of the same document (in the different languages) to our client and they need to be able to install the different versions onto their iPads. And they want the options of having multiple language versions on the same iPads.
    We have already created two language versions of the document (a US English and an International English version).
    The two documents have different file names, (although they are based on the same document). We have just changed the spelling of some words accordingly. (And we will be producing other language variants based on the master file).
    We export the two documents via the File > Export > iBooks option. Then we are using Dropbox to upload the two files. The files are then accessed via the Dropbox App on the iPad.
    We can download the first document (International English) onto the iPad and view it as normal, but when we try and then download the other document (US English) it downloads in the Dropbox App, but when you click on view in iBooks it opens the first (International English) document into iBooks.
    You can only appear to have one version of the document installed at any one time. If you delete the first one you can then load the second one fine, but not both at the same time. If the file names are different it must be getting the identity of the document from somewhere else.
    This has only started happening since using iBooks Author 2.
    Can anyone offer any suggestions please. I've tried changing the version number in the option on export, but this doesn't seem to affect the result.
    Thanks in advance for any suggestions
    John

    Further to my earlier post we have now completed a test by saving our original document as a template, then creating a new document from the template, making necessary changes and saving as a new file. We can now upload the two separate versions to our iPad.
    You cannot "duplicate" the file in any way, either by the File > Duplicate method from within iBooks Author or by simply Duplicating the original .iba file in the Finder, as this will cause the problem outlined above. By Duplicating you are obviously also duplicating this "hidden metadata" which is stored somewhere within the file which iBooks on the iPad is using to identify the documents. So unless Apple update the software to allow us to change that metadata we are stuck to using the Templates route. (Didn't have this problem on the last version of iBooks Author).
    This works for what we are trying to do, which is create different language variants of the same book.
    Working from Templates is probably the correct way to do it anyway, but might not necessarily be right for everyone.
    Working in iBooks Author is proving to be a rather testing experience. You certainly need the patience of a Saint. Not sure it's of the standard we expect from Apple, but then I guess, as they are giving it away "free", they think they don't have to offer any support for it.
    I think I would prefer to pay a fee for it and have a support route from Apple, rather than rely on a community of equally frustrated users who are all playing guinea pig and simply sharing their workarounds for a half baked product.
    Good luck to everyone!!! 

  • Can JWS be used as a multiple Java version management tool?

    WinNT4 WKS with JRE 1.3.1 - 1.4.2 loaded on it using IExplorer or Netscape.
    We don't have a need for the JWS download features because our clients (and their applications) remain static for the most part. However, we do require multiple JRE version support because our customers have written class/objet "fixes" (mostly for text rendering) and these fixes break if you try and run the application on a different version of Java from which it was written. Basically, we can't have a default JRE on each machine and hope that it will work with all customer applications. So we will load all necessary Java components on our workstations (in this case JRE versions 1.3.1 - 1.4.2). I know that browsers can be forced to load with a specific Plug-in version (providing it exists on the machine) through Object & Embed tags in the HTML and that standalone apps can be directed to the correct Java directory path. My question is, can JWS automatically identify the Java requirements of our customers applications and act simply as a multi-version management tool to provide the right JRE/Plug-In for either standalone or browser applications? Keeping in mind that all the JREs will be loaded on the workstions and it won't need to download any components from some site.
    I've noticed that JWS identifies all JREs loaded on a machine in the Java tab so I'm wondering if it can "switch" the environment as needed for each application.
    Does anyone know if I can use JWS in the scenario I described above? Thanks!

    JWS can manage the multiple JREs installed if you run the application through a .jnlp. This can not "switch" the default JRE. It runs the application specified in the .jnlp using the requested version specified in the .jnlp.
    JWS does not apply to applets. You should use the object tags as you mentioned below.
    ...can JWS automatically identify the Java requirements of our customers applications
    No. You must determine this and setup the .jnlp appropriately.

  • Software versions on fieldpoint controller

    I was updating my cFP 2120 with the newer software versions (because I'm having some problems with communication via Datasocket and logos, which I'm going to post in the Labview forum, and thought this might help), updating all software versions to that of my PC.  Too late, I noticed that I updated the Labview RealTime to version 8.0 from version 7.1 but I am only running LV 7.1 both on my realtime app and on my PC.  Now when I try to set my LV target to my cFP I get the error: "Access denied: LabVIEW RT communication protocol version mismatch."  I'm assuming it's because of the 8.0/7.1 descrepancy.   So I tried to go back to LabView RealTime 7.1 on the cFP but when I do that it gives me the error: "Cannot process install because other dependencies are required: LabView RealTime 8.0."  I think I'm trapped in a circle!
    So my most basic question is, How do I go back to the way it was?
    My other question is, is there somewhere to get a list of the most current versions of the software that should be installed and are compatible with LV 7.1?  The ones that I need to know are the ones installed on the cFP controller (the list that appears when you right-click on Software and choose Add/Remove software):
    Datasocket for LabVIEW Real-time - 4.3 or 4.2?
    FieldPoint drivers - 5.1.2 or 5.1.0?
    FieldPoint VI Manager - 4.0.0 or 3.1.0?
    LabVIEW RealTime - 7.1 or 8.0?
    NI-IrDA RT - 1.0.2 or 1.0.1? (I don't even know what this is)
    NI-Serial RT - 2.5.6 is OK?
    NI-VISA - 3.4.1 or 3.3.1 or 3.2?
    NI-Watchdog - 2.1.4 is OK?
    I also have a Network Variable Engine and a Variable Client Support but neither are installed on the cFP - don't know if they should be.
    In general I'm using Fieldpoint 5.0, I'm assuming this is OK for LV 7.1??
    Thanks for any insight.

    Hi !
    I’m new on FP platform and I have quite the same problem :
    on my controller (2120) :
    fieldpoint drivers 5.1.2
    fieldpoint Vi manager 4.0.0
    real time 8.0
    ... (see the attached image)
    this set-up was made by my predecessor (gone forever with the coding computer)
    for some obscure reasons and now my boss ask me to make some modification on
    the code, so I tried to deploy a new version on the FP and of course there is a
    version compatibility problem with versions installed on my computer
    I have tried both LV 8.0, 8.2, LV real time 8.0, 8.2
    I need LV and LV RT 8.2 to open the project and I was unable to export it to a
    previous version (8.0)
    real time 8.0 seems to be needed by the controller (instead of 7.1) but when I
    try to deploy I think 8.2 is used by my computer
    the LV code deployed on the controller works fine but we need to add some fonctionalities, I was thinking of re-inteall all the compatible versions but my boss doesn’t want me to modify the software installed on the controller because
    in case of a problem we have a production problem ... so I can just do watever I want with my computer
    in he's memories a NI guy is came few months ago to make some modification on
    the coding computer (gone) but there is no information about what does he made…
    is there is a way to get off this shit ?
    sorry for my
    poor english
    matthieu
    Attachments:
    max.png ‏11 KB

  • My computer crashed and I need to reset up my phone.  Iphone 3 running software Version 4.2.1

    My computer crashed and I need to reset up my phone.  I do not have a backup.  Iphone 3 running software Version 4.2.1
    After researching this, I understand that I will need to reload iTunes on a new computer, deactivate the prior computer and authorize the new computer with iTunes. I can then restore any apps and music purchased through iTunes. (Insert Question 1 Here.) Then Sync the phone with the new account, taking care to do it manually so as not to overwrite the information on the phone.  This should restore the apps and music to my phone. (Insert Question 2 Here.) This process will not restore photos (Insert Question 3 Here.) I would like to over write my current phone calendar (start fresh remove all appointments) and have it sync with a different iTunes.  (Insert Question 4 Here) .
    Am I forgetting anything or misunderstanding anything?   Thank You!
    Question 1:  Apple help states that you can download previous purchases directly to phone with iOS4.3.3.  Then later states that iOS 5 or later is required for iPhone (CDMA Model).  ON this page http://support.apple.com/kb/HT2519  I am still running Version 4.2.1 on my iPhone 3. Will this cause difficulty with restoring apps and music (purchased through iTunes) to my phone? 
    Question 2:  What happens to data stored in the apps within the phone?  Like password information stored in Splash ID, Files Stored in Air Sharing, or photos stored in a separate app (not the standard photo library)?
    Question 3:  Will the photos in my iPhone standard library be deleted when I sync?  Does anyone know of a way to save them other than emailing them to the computer, prior to syncing?
    Question 4:  Is it possible to have my calendar and contacts sync at my office computer and have the other items sync to my personal home computer?  How does that affect my restore process? I want to ensure the contacts are NOT deleted, but I want the calendar to be overwritten and start fresh.

    The software update process does not touch any user data or settings. Fact is, merely updating your software should not have deleted your contacts. Something else is going on here. First of all, the only signed firmware available for your phone is iOS 4.3. So, how were you able to update to iOS 4.2.1, since that is no longer available from Apple? First thing done when you update software is an iPhone backup. Included in that backup are your contacts. Connect your phone, iTunes running, DO NOT SYNC, right-click your phone in the left device pane & select "Restore from Backup". Select the backup made when you started to update your phone. Note: this will also install iOS 4.3 on your phone.

  • I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps?

    I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps? I know I can get it by itunes but there are a few problems as below:
    1. I have jailed break my iphone and I never purchased any apps from itunes
    2. I have some important infomation saved in one of the apps called "awesome notes". How can I get it back? Is it store inside my computer? if so, how can i restore?
    3. I am using window 7
    I sincerely hope you guys can help me.
    Regards,
    Stephen Hong

    alrite. I have made my mistake. I should not jail break my iphone. So if I purchase my apps again from itunes is that mean mean my data will be back?
    I hope you guys can giv me some support here since I am Apple genuine buyer. I could be wrong last time and now I turn over a new leaf and learn a lesson.
    Please noted that I can always create new account to ask for the same questions without mention about "jailbreak" if I want to but obviously I won't do that. Please provide me your support! Thank you!

  • I have an I Pod Nano and would get messages to update my software.   In my I Tunes I have 1,900 songs but after the updates it will only sync 933 songs.  My current software version is 1.0.2.  What am I doing wrong or is it something in the software.  I h

    I have an I Pod Nano and would get messages to update my software.  In my I Tunes I have 1,900 songs but after the updates it will only sync 933 songs.  My current software version is 1.0.2.  What am I doing wrong or is it something in the software.  I have not done anything different in my I Tunes and all songs are checked.  Could someone please help or advise me what to do?

    Thank you Gail, but not to be ignorant but can I send you a print screen on what I am looking at.  I will try am explain what I see: I hooked up my I Pod Clicked on Music checked Sync Music 1909 Songs select Playlist, Artists, albums, and genres checked Include music videos Playlists checked 50's Music checked 70's Music checked 80's Music checked 90's Music checked 2000 Music checked 2010 Music   These are songs that I downloaded onto my I Tunes.  I bought me a new computer but when my data was transferred from old computer to new computer a lot of my songs on my hard drive were lost, but they were able to save all my songs on I tunes.  My I Pod is still connected Clicked on "On this Ipod" Music 938  Songs 2.2 days So my question to you is if I have 1,909 songs on my ITunes how come only 938 transferred to my IPod.  I checked my IPod and it shows only 938 songs transferred.  This did not happen before until I Tunes asked me if I wanted to update to a newer version.  Last month I did have all my 1,909 songs on my I Pod.  I hope this explains what I am asking

  • Receiver Determination when multiple Product Versions / identical namespace

    Hi,
    How would the receiver determination be done when we have multiple product versions with identical namespaces and interface names ?
    During development, when we do a release transfer to another product version, the namespaces and interface names remain same as the current objects.
    How would XI resolve the correct interface in this case ?
    thanks,
    Manish

    The XI does not care about the application systems. When a message is received by the application, it knows, what to do with the messages.
    The receiver could be an RFC call, an IDOC, an Abap Proxy, here the correlation between interface and Abap code is unique.
    The receiver could be a File, or JMS adapter, here the correlation  between interface and communication channel is unique as well.
    You might reuse IDOCs or RFCs or in rare situations other interfaces in different software components and install them for the same application system. But you can only generate proxies from one interface.
    Regards
    Stefan

  • What has been updated in each new software version...

    I just updated my N95 8GB firmware to 30.0.0.18. My previous version was 20.0.016. It sounds like huge step when main number has increased from 20 to 30.
    However in the software update news page, which the main topic in this discussion area "TOP questions about Software Updates - start here" refers to eg. http://europe.nokia.com/A4577225 only has a few sentences about the new features of new firmware version. (and actually only for version 30.0.0.15, see news subtitle "Nokia N95 software version 30.0.015 released " ).
    I'd like to read more about the new features of 30.0.0.18 or 30.0.0.15.
    In general, is there a site, where new features or improventmens of the firmware versions are documented?
    br: zimi

    Nokia considers changelogs to be confidential information and does not release them to the public.
    If you see any such information, it is leaked information and should therefore be treated with circumspection.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Multiple Production Versions in Subcontracting Inforecord

    Hi Gurus - I have a question on how to assign multiple production versions in Sub-contracting Inforecord?
    I heard this functionality is available in ECC 6.0 is that true? If so how can I assign multiple production versions? What happens after we CIF across to APO? Any help is highly appreciated.
    Thanks and regards,
    Murali.

    Murali - Its possible to use multiple PV in sub contracting.
    Settings in ERP :
    1. In CFC9 activate the - Transfer multiple selection of PDS indicator. When you select this indicator, the system allows you to select several productions versions in the integration model; it also creates a Production Process Model (PPM) or Production Data Structure (PDS) for each production version in SAP SCM
    2. Assign the PV's to the subcontracting info record through -  Logistics  - Central Functions  - Supply Chain Planning Interface - Core Interface - Advanced Planner and Optimizer - Environment  - Data Transfer  -Assign Multiple Production Versions
    3. When you select the integration model parameters for PDS, you have selected PP/DS Subcontracting as the PDS Type value. Similarly, for PPM, you have selected Subcontracting PPM as the Type of PPM value.
    Subcontracting with multiple production versions is supported. However, the integration with an SAP ERP system requires at least SAP ERP 2005 with Enhancement Pack 03.
    Rgds
    Valavan

  • LWAPP to CAPWAP across different software versions. ?

    Hi guys,
    I was wondering if someone could clarify what happens when you have controllers live on two different software versions..
    We have 4 controllers.. 2 on version 4.2, which APs currently register to with LWAPP and 2 new ones on version 7..
    On WCS, I have moved an AP currrently registered on a version 4.2 controller and reassigned it to the newer controller ( ver 7 ).
    The AP then reboots and I can see in the event logs that it comes back up on LWAPP after resolving the entry CISCO-LWAPP-CONTROLLER.
    On WCS, the AP shows as registered back on the old Controller ( ver 4.2 ) but the Primary and Secondary Controllers are still pointing to newer ones ( ver7 )..
    According to the Cisco document, the transfer from LWAPP to CAPWAP should be seemless, so is this a problem migrating across different software versions. ?   Will the AP sort itself out eventually.
    If I console into the AP and statically assign the new controller IP address, this forces the AP to download the newer software version ( after multiple auto reboots ) and it comes up on CAPWAP.. This shows that the path between the AP and controller is ok..
    Ideally, Im hoping that I can simply reassign our current APs to the new controller ( and onto CAPWAP ) rather than having to console into all our remote APs and statically reconfigure them.. Not fun !!.
    Any advice would be appreciated..
    Thanks.
    Jon.

    Hi Nicolas,
    Thanks for the reply..
    Yes I agree that, once on version 7 it will perform a lookup for " cisco-capwap-controller ".. I forgot to say in my original post that I had already check this and it does resolve correctly to the two newer controller IPs.. If I console into the AP and manually define the newer controller IP address, it all goes through sucessfully and I can see the discovery and correct registration process in the logs
    So we know that it kind of works but Im hoping that there is a simplier solution from within WCS where I can do all this remotely, rather than consoling into every AP locally.
    Your suggestion of inputting the new controller IPs in WCS instead of the names sounds good however, it needs to be on version 7 first to be able to do this ? As you say, there is a field for this in version 4.2.... Looks like there is a bit of chicken and egg going on here !!.
    Any other ideas or thoughts would be appreciated.
    Many thanks.
    Jon.

Maybe you are looking for