Multiple source one target !

HI,
any hint are welcome
I have about 40 sources databeses with the same schema .I need to replicate all data from this databases to one target databases in one schema tables . It is posible using advacenced replciation to do that and what are other possible solution .
Thank,
Mirel

Yes you can use replication but there has to be something unique, like primary key.

Similar Messages

  • Merge multiple source table dates and to one target table

    The requirement is to merge multiple source tables (each table has a set of start and end date) to one target table with one set of start and end date and contain the date relevant column values from each source table.  Payment source tablestart dateend datepayemnt1/1/201512/31/2015301/1/201612/31/999960Position source tablestart dateend dateposition1/1/201512/31/2016101/1/201712/31/999920Target tablestart dateend datepayemntposition1/1/201512/31/201530101/1/201612/31/201660101/1/201712/31/99996020 What transformation(s) will be best to use to handle this requirement? Thanks, Lei

    Thanks Karen,
    that was exactly what i was hoping for.
    Maybe it could be made easier/less confusing if the Mapping Workbench just made you choose a target table. But maybe this is not usefull if the table contains two foreign keys to the same table. Or maybe this should just be put somewhere in the documentation.
    Regards,
    Robert
    Hi Donald,
    fortunately i'm my own DBA so i don't have any problems ;-). However i'm certainly interested in the reasons for not having such a conditional foreign key.
    However actually the foreign key isn't conditional, the condition is that either the field (using the FK) must be filled, or a free-format field. The reasoning for this is that we have a list of known towns and if the addres is local a town from that list must be chosen. If the addres is outside the country a town can just be typed in (no list).
    Concerning the agrregate, all fields are always used. There are no neediness flags anywhere. The aggregate contains three fields which are mapping as direct (two fields) or a One-to-one (the FK). All 'parents' all contains these three fields.
    Regards,
    Robert

  • Mapping multiple source value to one target value in value mapping

    Hello experts,
    In my scenario, i need to map more than one source value to one target value in value mapping. Like:
    1        TenderPickup
    2        TenderLoan
    7        TenderPickup
    101     TenderPickup
    102     TenderLoan
    107     TenderPickup
    But when I enter the same target value for the second time and try to save it, it gives me an error saying value mapping already exists.
    But this should logically be allowed. How can this be done. Please provide a solution.
    Thanks,
    Yash

    Hi Prabhu,
    When i right click on the target field, it gives me only 3 options:
    1) Insert Row
    2) Delete Value Mapping
    3) Value Mapping in all agencies
    I dont see nay option for duplicating rows.
    What I hae done is in ID i clicked on TOOLS and then VALUE MAPPING. I checked the option "Value Mapping Agencies" and gave my source and target agencies detials. Then i clicked on DISPLY and in the next page I have 3 columns - Value for <source agency>, Value for <target agency> and Group name.
    When I give duplicate values in the column Vlaue for <target agency>, it doesnt allow me to and if i right click in this column, i get the above mentioend options.
    Please point out where i m going wrong.
    Thanks,
    Yash

  • Best Practive - One mapping reading multiple source files

    I want to develop a solution for one single mapping reading multiple similar source files that are stored on different directories on my OWB server. I want to be able to determine on runtime of my mapping from what location to load the source file from.
    Example:
    Mapping: Load_test_data
    source file 1: c:\input\loc1\test.dat
    source file 1: c:\input\loc2\test.dat
    When I run the mapping I would like to use an input parameter specifying the location loc1 or loc2. I would also like to use this input parameter in my mapping to populate one column in my target table with the value of this input parameter. This design would make it possible to dynamically load source files from different directories and also being able to see after loading where the data came from.
    Questions:
    - Is there a way to create such a design
    - If not, what alternative would be appropriate.
    Thanks in advance for the feedback

    Thanks for the feedback. Unfortunately I do not use workflow together with my OWB.
    I now indeed specified the file name and file location in the configuration of my mapping. However I am not able to change then upon executing the mapping. Data file name and file location are empty and greyed out when I execute my mapping. It always takes the values I specified in the configuration of my mapping
    What I would like to do is specify the location upon runtime when I execute my mapping, but I don't know if this is possible. In addition I'd also want to use the data file location as an input parameter for one of the columns I populated in my target table.
    Then in the end I would be able to use one mapping and read multiple sources files from different locations and also be able to check in the end where the data was loaded from.
    Hope you can give me some more feedback on how to set this up in OWB.
    Many Thanks!
    data file name parameter to ma

  • Transform data from multiple sources to single target in bpel 10.13.1.0

    Hi,
    I need to transform data from mulitple sources to single target schema.
    Please any one can give some idea.
    Regards
    janardhan

    We are gone a other way merge multiple information into one target.
    First we have created a wrapper variable with the structure of the target variable that we want use in the transformation.
    With a assign element we filled the wrapper variable with information from the inputvariable of the bpel process and some addtional information.
    Then we called in the transformation the wrapper variable as source and the target variable as target.
    We have used that way in some bpel process and it works for us.
    Within Oracle SOA Suite 11g, there is the mediator component that does simply routing
    and transformation functionality within a composite (SCA).
    That's all, I hope that help.
    Michael

  • One Target for multiple items

    Does anyone know how to set up a drag and drop activity where
    you can have 1 target that multiple items get dragged to? For
    example, an activity where you would drag multiple images into a
    trash can.
    I've tried, and it seems like once one items goes into the
    target, nothing else works because its going on top of the first
    item.
    TIA!!!

    OK, I'm having trouble again. I need multiple items to drag
    to one target. I'm putting all my actionscript in the same frame,
    and here's how it looks:
    stop();
    name_mc.onPress = function():Void {
    this.startDrag(true);
    name_mc.onRelease = function():Void {
    this.stopDrag();
    if (eval(this._droptarget) == safe_mc) {
    this.swapDepths(this._parent.getNextHighestDepth());
    this.removeMovieClip();
    address_mc.onPress = function():Void {
    this.startDrag(true);
    address_mc.onRelease = function():Void {
    this.stopDrag();
    if (eval(this._droptarget) == safe_mc) {
    this.swapDepths(this._parent.getNextHighestDepth());
    this.removeMovieClip();
    And I'm getting the following error message:
    **Error** Scene=Recap, layer=actions, frame=1:Line 21:
    Statement block must be terminated by '}'
    address_mc.onRelease = function():Void {
    **Error** Scene=Recap, layer=actions, frame=1:Line 27: Syntax
    error.
    Total ActionScript Errors: 2 Reported Errors: 2
    Do you know what I'm doing wrong?

  • Mapping Multiple Source fields to Single Target Fields with differnt Values

    Hello Friends,
    I am having a senario  where I have to mapped multiple fileds from source str. to same Idoc Fields with ( differnt default values )
    E.g Source Str.
    - ShopNO
    - OrderTyp
    Has to mapped to Idoc Str E1EDK14-Orgid.
    E.g Mapping:
    So when ShopNo will mapped to E1EDK14-Orgid the default value should be "MOP" & E1EDK14-Qualf should be 019
    and when OrderType will be mapped to E1EDK14-Orgid the default value should be "STD" & E1EDK14-Qualf should be 012
    So I tried of using node "UseOneAsMany".....but there I cant define the vaule of field orgid, and seconly how to specify the values of field Qualf?
    Do i need to write my own specify function ? or I can sovle this issue using standard avaiable functions ?
    Regards,

    Hi Ravi,
    Thanks for your reply....
    I am facing following problem... when I try to duplicate the segment and do mapping....... and then when I save, I got following error msg:
    The source or target structure has been changed or could not be found in the Integration Repository. The mapping definition contains elements or attributes that do not exist in the changed structure. The relevant entries will be deleted
    Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KSCHL. Skipping mapping
    Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KRATE. Skipping mapping
    Any suggestion ?
    in other words, when I do duplicate it creates me the segment, but when I save it, it gets disappered .........
    Regards,
    Edited by: Shah H on Oct 26, 2009 3:17 PM

  • Multiple source values to single target in value mapping

    Hi Experts,
    I have to acheive below thing using value mapping.
    Source                        Target
    ABC                            111
    CBA                            111
    XYZ                             222
    ZYX                             222
    When I am trying to do this in ID, It is not allowing me.
    Is there a way to do this?
    Regards,
    Prasad

    Source            Target
      ABC               111
      CBA               111
      XYZ               222
      ZYX               222
    For the above source and target you have to create 2 value mapping groups.
    In more detail I want to say is,
    1. Just create your value mapping by using Source & target Agency & Schema.
    2. Create your first value mapping group which will return the traget value as '111'.
    3. Create your second value mapping group within the same  Agency & Schema which will return you '222'.
    While creating it If get any warning just ignore it..
    Note: You can add multiple value mapping groups if you have different outputs for different sources.
    Regards,
    Sarvesh

  • Open Hub - Data from multiple sources to single target

    Hello,
    I am using Open Hub to send the data from SAP BI to Flat files. I have a requirement where I want to create a single destination from multiple sources. In other words in BI we have different tables for attributes and text. I would like to combine the data from attributes  and text into a single file. For eg. I want to have material attributes and text in the same single file as output.
    Is this possible in Open Hub? If yes could you please help me to understand the process.
    Thanks,
    KK

    Hi,
    1. Create the Info Spoke and activate it
    2. Change it and go to transformation
    3. Check the box InfoSpoke with Transf. Using BAdI
    4. You are asked if you want to generate the spoke. Say yes & Simply set some texts and activate here, then return.
    5. You can now change the target structure. Simply create a Z structure with all the attributs & text field in it in the SE11 and enter it here.
    6. Double click on BAdI implementation & then double click again on "TRANSFORM" method of the implementation. It will take you to method  
    "IF_EX_OPENHUB_TRANSFORM~TRANSFORM"
    7. Write a code to select & fill the text field & map other filed with the attribute fields.
    Example:
    ZEMPLOYEE_ATTR_STRU - Target Structure for InfoSpoke EMPLOYEE_ATTR
    EMPLOYEE     /BI0/OIEMPLOYEE     NUMC     8     0     Employee
    DATETO     /BI0/OIDATETO     DATS     8     0     Valid to
    DATEFROM     /BI0/OIDATEFROM     DATS     8     0     Valid from
    COMP_CODE     /BI0/OICOMP_CODE     CHAR     4     0     Company code
    CO_MST_AR     /BI0/OICO_MST_AR     CHAR     4     0     Controlling Area of Master Cost Center
    HRPOSITION     /BI0/OIHRPOSITION     NUMC     8     0     Position
    MAST_CCTR     /BI0/OIMAST_CCTR     CHAR     10     0     Master Cost Center
    TXTMD     RSTXTMD     CHAR     40     0     Medium description
    Note: Text and attribute are in same structure.

  • Creating multiple source systems one logical system

    Hi,
    The requirement is to create two source systems using same logical name and different RFC connections to ECC?
    We wanted to do some regular activities using one source system and some drill down activities using different source system.
    I am getting error when I try to create second source system "source system already exist"
    Please advice.
    Thanks.

    Hi,
    I dont think it is possible to create multiple source systems in a sinle logical client. You have to create multiple clients and you can connect to BI system by different RFCs.
    Hope this helps.....
    Regards,
    Suman

  • Can you drag several sources to one target?

    Hi,
    I am using Captivate 8 and I have a drag and drop set up. Can you drag several sources (correct answers) into one target? Or does each source have to have its own target?
    Thanks,
    Kristen

    Yes, you can. Check out the demos here by Dr.Pooja Jaisingh.
    Adobe Captivate Help | Drag-and-drop interaction
    Sreekanth

  • Load into single target table frm multiple source table in single interfac

    Hi
    I have four source table and a single target table.
    I need to move data from either of these tables into a target table , and we have to decide the source table based on user input.
    Example :
    Lets say there are four tables A,B,C,D and one target table T.
    If user input says A
    then the data from table A will move to table T
    And again , if the user says table C then data from table C will move to table T.
    And we have to create only one interface for achieving this in oracle Data Integrator ( ODI ).
    You can take assumptions in source and target table.

    Hi ,
    In ODI 11g , there are new feature callled dataset. It allows to use UNION , MINUS etc.
    Google it , you will get many tutorials on Dataset. check the link
    http://www.rittmanmead.com/2011/06/odi-11g-new-mapping-and-interface-features-part-1/
    In your case , you can provide filter conditions on your tables i.e.
    Say My target table is EMPLOYEE , My source tables are EMPLOYEE and DEPARTMENT
    INSERT INTO EMPLOYEE(CUSTOMER_ID , CUSTOMER_NAME) SELECT CUSTOMER_ID , CUSTOMER_NAME from employee where 'EMPLOYEE' = :EMP
    UNION DEPARTMENT_ID , DEPARTMENT_NAME from departments where 'DEPARTMENT' = :EMP ;
    Just pasted the Screenshots on following page : http://oracoholic.blogspot.in/ . Have a look
    Edited by: user8427112 on Jan 8, 2013 11:04 AM

  • Multiple source and single target

    Hi,
    I have 3 users in informatica and i wanted to find out tablespace size in gb and mb
    SELECT
         '$$TABLESPACE_NAME',
         SYSDATE,
    SUM(BYTES) / 1024 / 1024 / 1024 size_in_gb,
         SUM(BYTES) / 1024 / 1024 size_in_mb     
    FROM user_segments
    WHERE tablespace_name like '%$$TABLESPACE_NAME%'
    i confugred this wf and it has 3 session task and each session task confugured with one user but in wf connection details i can able to add only 1 parameter i.e. dbconnection_oltlp and dbconnecion_olap
    so what is happening it is reading size for one user only i.e. for dbconnection_oltlp and dbconnecion_olap.what about remaining users.i.e. remaining session task is getting failed
    i.e. dbConneciton_olap2
    thanks
    Chinu

    Hi
    I have 3 different session task in one workflow and each of them have different source now i want the parameters should generate automatically in paramaeters tab of DAC
    because when i am adding above query in informatica it is reading only one connection which confugured in task i.e. is not reading remaing 2 sources
    i.e. dbconnection_oltp and dbconnection_olap---session--1--reading it because confugred in task confugrtion of DAC)
    dbconnection_oltp1 and dbconnection_olap1---session-2(different source and target-not hitting to this connection)
    etc
    thanks
    chinu
    Edited by: Chinu on Aug 4, 2011 9:05 PM
    Edited by: Chinu on Aug 4, 2011 9:08 PM

  • Transparent Partion with three sources and one target- Need quick response

    I am creating transparent partion with three sources and one target.What will be the impact of this on retrieval and how can I improve retrieval.
    Thanks,

    transparent partion
    1:network load will be heavy
    2:transparent partion allows user to manipulate or edit or delete at will ,from the user to target
    and also from target u can update it back to respective databases
    3: disk usage will be high
    [email protected]

  • Collect multiple type of idocs in one target message

    Hi,
    I want to collect several idocs (WP_PLU, WP_EAN) on one target message (FILE), group by partner.
    I known it's possible to to that using BPM but, because of performance reason, i can't use this option.
    There is another way to do it?
    Thanks,
    Carme.

    Hi ,
    Other than BPM you can do but it will be complex.
    Then you drop all the IDOC XML  file in a folder.
    And then pick up all the file using file adapter.
    File adapter can support attachments in Sender File adapter (NFS)
    you can use additional Files option - http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
    one file will come as a main payload otheres will come as an attachment.
    Then in mapping you need read those attchment from input data and map it to target.
    Check this link: /people/samuel.chandrasekaran2/blog/2008/10/06/xi-mail-adapter-dynamically-building-attachment-and-message-body-content-using-a-simple-udf
    Also this thread Attachment in Java mapping
    http://help.sap.com/javadocs/pi/SP3/xpi/com/sap/aii/mapping/api/Attachment.html

Maybe you are looking for