Multiple Tables in Pages

I am trying to set up a template which will use multiple tables. The first couple of tables (4Rx3C; 11Rx3C) work fine. The 4x3 table is across the top and the 11x3 table is on the left hand side of the page below it. I would like to add two more tables each below the 4x3 and to the right of the 11x3. It seems like I can add one without issue, but in trying to add the second, it hides behind one of the existing tables OR goes to next page. I cannot drag it without it returning to its starting position. Maybe Pages isn't the vehicle to do this, but I really don't want to do InDesign because... (well, I just don't)
Thanks for any help.

It's your duty to define the tables dimensions so that they may fit in a single page.
It may also be useful to define the tables as floating, not as inline (the default setting).
For details, read the Pages User Guide which you may download from the Help User Guide.
Yvan KOENIG (VALLAURIS, France) samedi 19 septembre 2009 17:46:29

Similar Messages

  • Javascript code to enable an ADD button to create duplicate tables and pages for multiple entries

    I am using Adobe XI Pro. I have created a multi-page fillable pdf questionnaire that I want to make interactive to the user. Within each page, I have multiple tables that can have ADD buttons to duplicate the table if the client wants more than one test. I would like this table to insert directly below the previous table and they may be able to add upto 5 of these table.
    I also have a couple pages in the questionnaire that require duplication for multiple samples. Eg. One page per sample, and I may have upto 10 samples. I would like the javascript to have an ADD button and then add each page behind the previous related sheet (Original and duplicates together)
    I am not a javascript coder so I would need some examples and a walk through. I did take some developer courses in engineering but it has been almost two decades
    I have search on several forums and cannot find a good resource so I appreciate the help.
    Sincerely
    Tara

    Some of what you want to do can be done using template features and a bit of JavaScript, but if your users will be using Reader, version 11 will be required. You can dynamically add new pages, but adding new tables to existing pages with reflow of content that comes after is not possible with a form created in Acrobat. If you have access to Adobe's LiveCycle Designer form creation software, you can create what's known as a dynamic XFA form that can do all of what you want. You can ask in the LiveCycle Designer forum for more information: http://forums.adobe.com/community/livecycle/livecycle_modules_and_development_tools/livecy cle_designer_es?view=discussions

  • Mailmerge pages with numbers multiple tables

    How can I create a mailmerge with Pages and Numbers where in the numbers document multiple tables are used (in sepeare worksheets).
    It works ok, if I have one table in one document, but as soon as I add another worksheet or table then I am not able to select a table when merging. In the example videos it is included, but the only thing I can find is that I should use 1 table in 1 doc.
    I use the formatting rules for one headerrow and no headercolumn.
    Regards, Linda

    As far as I know, the merge tool doesn't create 10 documents when the Numbers table contain 10 rows of datas.
    It create a single document embedding 10 customized versions of the original document as you may see on this screenshot.
    Yvan KOENIG (VALLAURIS, France) dimanche 18 septembre 2011 16:08:41
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Add to Multiple Tables from One Page

    Hello,
    I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
    ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
         Error      Unable to process row of table IDD_ID_DATA.
    So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
    So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
    I am new to APEX so any help would be greatly appreciated!

    UPDATE:
    I received an email from the APEX Support Team:
    "The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
    In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
    I have been playing around with PL/SQL code and the end result is this:
    begin
         INSERT INTO table1
         VALUES(
              :P2_Item_Field1,
              :P2_Item_Field2);
         INSERT INTO table2
         VALUES(
              :P2_Item_Field1,
              :P2_Item_Field2);
    end;
    I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

  • Showing data in multiple tables  for a page in smartforms

    Hello freinds,
    I am creating a smartform in which i have to show data which are different
    tables .
    i mean to multiple tables needed for showing dat their corresponding continuous data
    and amount of data is also not fixed for table .
    what is the solution  .
    kindly suggest me with elaborated steps  .
    Thanks & Regards
    Digvijay Rai

    Hi Digvijay,
    Yes it is possible to show multiple table's data in a continues manner.
    In smartform onlt the Main window could be extended according to the table length i.e if the data in a table exceeds the main window height, it is continued in the next page.
    So you can declare as multiple tables in the main window.
    for example if u have 3 internal  table which r needed to be printed in a continues manner u can declare 3 tables in a main window which would be printed one after the other in a continues manner.
    Regards,
    Akash Rana

  • Apply percentage upcharge - multiple tables, multiple pages

    Creating a price book with multiple tables on multiple pages. When it comes time for a price increase, can I apply a percentage (for instance, 3%) upcharge to all or specific tables in the book? Is there an easy way to do this?

    Why not have one location that has the percent increase you wish to use, then refer a column next to the original Price with "Marked up price" that uses the original price times the one cell that has your percent in it. This way you have one location to type in the increase, and it reflects on all tables.
    If you want only specific tables at one time, but want to choose, then create a check list that you check off which tables get the price increase. In the "Marked up price" columns, you then put an IF statement that will show original only if its box in unchecked in the list table.
    Jason

  • Table Overflow - Page Break - Multiple tables in Body page in Adobe forms

    Hi,
    I have to do a payslip in Adobe forms. I am using only Adobe for print forms.
    Please redirect me to correct category if this is wrong category.
    I am customizing standard form PYXXFO_SAP_PAYSLIP_IN01. (payslip for india through hrforms)
    The standard form is entirely positional. So, if the contents of the table overflow, they are overwritten on the contents below.
    So, I have to make corrections to adjust the payslip for table overflows.
    My changes:
    1. There are total 8 tables in form. I created content areas for each of them and assigned the subforms/tables to those content areas.
    2. I converted the body page from positional to flowed, and applied the related pagebreak settings.
    The problem I am facing:
    When the earnings table overflows, the rest of the content is displayed on second page, in a continuous manner.
    eg.
    The structure of the form is:
    Header details
    earnings table   deductions table   form16 table
    Other tables
    leave details
    now, if the earnings table overflows -
    page 1:
    Header details
    earnings table (page break)
    Page2:
    (continued)earnings table
    page3:
    (continued)earnings table   deductions table   form16 table
    Other tables
    leave details
    In this, the deduction table and form16 table is shown on 3rd page. I wish to show them on the first page as they have not overflown.
    I am sure, I am missing something very small, but I am unable to understand what.
    I tried all the possible combinations.
    Does the main subform needs to be "positional"?
    They way I expect it is:
    page 1:
    Header details
    earnings table (page break)    deductions table   form16 table
    Other tables
    leave details
    Page2:
    {Header details - It would be great if I could have this}
    (continued)earnings table
    page3:
    {Header details}
    (continued)earnings table
    Also, If this is successful, I would like to apply the same feature to rest 6-7 tables.
    Edited by: chinmay kulkarni on Aug 17, 2011 3:04 PM

    This was a duplicate question.
    Kindly remove this thread if possible.
    The solution for this thread is as follows:
    I was sort of hoping that there should be some standard functionality available for this, it being Adobe, but there is not.
    So, I had to run a work around. Quite a lengthy one.
    What the problem was:
    I needed to print around 4-5 tables adjacent to each other in single page and in verticals. What Adobe does is: it fills 1st table, then 2nd then 3rd and so on. So, if there is a page break due to large entries in the adobe, the contents breaks with rest of the tables being blank, but the content being filled sequentially.
    What I did was:
    I created a grand table with the structure having all the tables embedded in it. eg.
    data: begin of grand_table occrs 0,
    table_A type table_a_table_type,
    table_B type table_b_table_type,
    table_c type table_c_table_type,
    end of grand_table.
    Hence, I could include all the data in a one single grand table, and put the data in sequential manner.

  • "Failed to open the connection" problem related to multiple tables in the report?

    Post Author: Gadow
    CA Forum: Data Connectivity and SQL
    System specifics:
    Web environment using ASP.Net 2.0 (from Visual Studio 2005 Professional)
    Crystal Reports 2008, v. 12.0.0.549, Full
    We have set up the following method for displaying reports via our website:
    User is sent to a report-specific page. The user is given some filtering options specific to the report that will be viewed. When the user has specified the data filters, the user clicks a button.
    The page wraps up the report parameters -- selection query, formula values, report location, the name to be displayed, etc. -- into a class which gets put into the Session object.
    The page redirects to DisplayReport.aspx. ALL reports redirect to this page.
    DisplayReport.aspx retrieves the report parameters from Session. A ReportDocument object is created and loaded, then set with the data from the parameters class.
    A ConnectionInfo object is created and set with the relevant log on credentials. All of the reports draw from the same database, so the connection information is hard-coded as the same for all reports. The page then iterates through all of the tables in the Database.Tables collection of the ReportDocument and calls ApplyLogOnInfo to each table using the ConnectionInfo object.
    The page is rendered and the user gets the filtered report.
    We currently have seven reports. Five reports work fine and display the correctly filtered data with no error messages. Two reports generate a Failed to open the connection error and do not display. I have verified that the queries being sent to DisplayReport.aspx are valid, and as I said the connection information itself is hard-coded in the one page that displays the reports and this is identical to all reports.
    The five reports that do work all have a single data table, either an actual database table or a single view. The two reports that do not work all have multiple tables. As far as I can tell, this is the only difference between the sets; all seven reports are based on the same DSN and I have verified the database on all of the reports. All of the reports were written using Crystal Reports 8, and all of the reports display fine in a Windows app I wrote some years ago using Crystal Reports 8. Again, the only difference between those reports that do work and those that do not is the number of tables used in the report: one table or view in the reports that display, more than one table (tables only, none use views) in the reports that do not display.
    As for the code I am using, below are the relevant methods. The function MakeConnectionInfo simply parses out the components of a standard SQL connection string into a ConnectionInfo object. DisplayedReport is the ID of the CrystalReportViewer on the page.Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs)
            Dim o As Object = Session("ReportParams")
            Dim ReportURL As String = ""
            'Verify that there is a ReportParameters object
            If o Is Nothing OrElse o.GetType IsNot GetType(ReportParameters) Then 'Redirect to the error page
                Response.Redirect("/errors/MissingReport.aspx")
            End If
            ReportParams = CType(o, ReportParameters)
            'Verify that the report exists
            ReportURL = "/Reports/ReportFiles/" + ReportParams.ReportName
            ReportPath = Server.MapPath(ReportURL)
            If Not File.Exists(ReportPath) Then
                Response.Redirect("/errors/MissingReport.aspx?Report=" + ReportParams.ReportTitle)
            End If
            InitializeReport()       
        End Sub
        Protected Sub InitializeReport()
            Dim RD As New ReportDocument
            Dim CI As ConnectionInfo = MakeConnectionInfo(DB_Bonus)
            Dim RPF As CrystalDecisions.Shared.ParameterField = Nothing
            RD.Load(ReportPath)
            If ReportParams.SelectString <> "" Then
                Dim Adapt As New SqlDataAdapter(ReportParams.SelectString, DB_Bonus)
                Dim DS As New Data.DataSet
                Adapt.Fill(DS)
                RD.SetDataSource(DS.Tables(0))
            End If
            For Each kvp As KeyValuePair(Of String, String) In ReportParams.Formulas
                Dim FFD As FormulaFieldDefinition = Nothing
                Try
                    FFD = RD.DataDefinition.FormulaFields(kvp.Key)
                Catch ex As Exception
                    'Do nothing
                End Try
                If FFD IsNot Nothing Then
                    Select Case FFD.ValueType
                        Case FieldValueType.DateField, FieldValueType.DateTimeField
                            If IsDate(kvp.Value) Then
                                FFD.Text = String.Format("Date()", Convert.ToDateTime(kvp.Value).ToString("yyyy, MM, dd"))
                            Else
                                FFD.Text = "Date(1960, 01, 01)"
                            End If
                        Case FieldValueType.StringField
                            FFD.Text = String.Format("""""", kvp.Value)
                        Case Else
                            'For now, treat these as if they were strings. If things blow up here,
                            'we will need to add the appropriate formatting for the field type.
                            FFD.Text = String.Format("""""", kvp.Value)
                    End Select
                End If
            Next
            For Each T As CrystalDecisions.CrystalReports.Engine.Table In RD.Database.Tables
                Dim TLI As TableLogOnInfo = T.LogOnInfo
                TLI.ConnectionInfo = CI
                T.ApplyLogOnInfo(TLI)
            Next
            DisplayedReport.ReportSource = RD
        End Sub
    Does this approach not work with reports containing multiple tables, or is there something I'm missing? Any meaningful suggestions would be much appreciated.

    Dear Dixit,
    Please refer to the Crystal report landing page to get the details
    information about the support for crystal report issues.
    Please use the following thread to post your questions related to
    crystal report.
    SAP Business One and Crystal Reports
    Regards,
    Rakesh Pati
    SAP Business One Forum Team.

  • Multiple tables with the possibility of multiple records in each table

    Post Author: viper
    CA Forum: .NET
    Hi
    I have been trying for a few days now to come up with a CR solution to displaying data from multiple tables.  These tables, in some cases, have more then one record that needs to be displayed.  This is basically what I am trying to do.....
    I am developing a .net web application(vb) using vs2005 and an oracle 10g backend.  There is a data entry part of the site that users will enter data related to a property.  Other users will be able to search these records and have a list of records returned based on the search criteria.  The user then can click on one of these records to view a pop up CR report containing all the data related to that one property.  The PropID is passed to the pop up page and is used in the WHERE clause of my SQL statement to bring back only one property.  This data can come from as many as 18 tables if all the fields have been entered for this property.  I have tried many different solutions to get the data from multiple tables...and have had some that were close to what I need.  The best one I have will display data from multiple tables but only one record per table.....which doesn't work in my case since some of the tables have more then one record per table.
    Is there anybody that has had success in setting up similar reports?
    Does anybody know how I could use the "Group Expert" to group by the tables in my application?  I can only figure out how to group within a single table.
    It would be great if I could group by table....then just display the record(s) in each table that had the same PropID.  I am not sure if the pdf export would show all the data in that situation but it would be worth a try.  If fact...maybe I could create a new table called MyTables and just add two colums like MyTableID and MyTableName.  Then add all the table names to MyTables that I want to see in the report and add the associated MyTableID value to each table as a new column.  I could then group by MyTableID and PropID.  Just guessing here.
    Any ideas would be appreciated.

    Post Author: quafto
    CA Forum: .NET
    Your query is not too clear so I'll do my best to answer it broadly.
    You mentioned that you have a .NET web application where your users enter data on one screen and then may retrieve it on another. If the data is written in real time to a database then you can create a standard Crystal Report by adding multiple tables. The tables should be linked together using the primary and foreign keys in order to optimize the database query and give you a speedy report. Using unlinked tables is not recommended and requires the report engine to index the tables (it is quite slow).
    You also mentioned you have a "PropID" to be used in a WHERE clause. This is a great place to use a parameter in your report. This parameter can then be used in your record selection formula inside Crystal Reports. The report engine will actually create the WHERE clause for you based on the parameter value. This is helpful because it allows you to simply concentrate on your code rather than keeping track of SQL queries.
    Now, what Crystal does not do well with is uncertainty. When you design a report with X number of tables the report engine expects X number of tables to be available at processing time. You should not surprise the print engine with more or less tables because you could end up with processing errors or incorrect data. You may need to design multiple reports for specific circumstances.
    Regarding the group expert question. I'm not sure how you would/could use the group expert to group a table? A table is a collection of fields and cannot be compared to another table without a complex algorithm. The group expert is used to group and sort records based on a field in the report. Have a look at the group expert section of the help file for more information.
    Hopefully my comments have given you a few ideas.

  • In ADF how can i insert data in multiple table if they have foreign key

    I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
    Thnak you very much.

    Hello,
    Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
    1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
    2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
    3> i made that association composite by clicking the checkbox
    4> i created 2 VO from 2 EO.
    5> put those VO in Application Module.
    6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
    Now what to do please?

  • Adding Sum Totals from Multiple Tables in A single Document

    Hello All,
    I'm having trouble adding sum totals from multiple tables I've created in a Pages 09 doc. I putting together a spreadsheet for cost projections for a house remodel. I created tables for each room of the house. At the bottom of the document I'd like to have another table that takes the totals from each individual room and adds them up. Problem appears to be that each table has the same x/y axis labels so row and column numbers/letters are repeated so the final table can't quantify thing correctly.
    Any easy solutions? I can't find anything that's helped in my search efforts.
    Thanks,
    Josefis

    Jerry,
    Thanks for the feedback. I thought that might be the case. And you were correct to assume I was more comfortable in Pages. I'm halfway through converting everything to numbers. In the end it will work great too. Just some different formatting/design choices to be made as numbers doesn't appear to be as versatile in the same way pages is with design. So far it looks pretty good though.
    Thanks again,
    Josefis

  • Context index can't be used in complicated multiple tables join?

    hello
    thank you for view this page.
    i have a comlicated sql :
    SELECT count(*)
    from
    ((app_AssetBasicInfo left join app_AssetBasicInfoExt on
    app_AssetBasicInfo.id=app_AssetBasicInfoExt.id) left join
    (app_AssetCustominfo1 left join app_AssetCustominfoExt1 on
    app_AssetCustominfo1.id=app_AssetCustominfoExt1.id) on
    app_AssetBasicInfo.id=app_AssetCustominfo1.id) WHERE
    app_AssetBasicInfo.CategoryID=1 AND Del_tag=0 and contains(description,'department')>0;
    the table app_AssetBasicInfo and app_AssetBasicInfoExt have multiple columns and large recoord size. i create a context index on app_assetbasicinfoext(description) which description is 4000 varchar2.
    but the sql doesn't use context index. i suspect that the complicated multiple table join can't use context index? does it correct?
    thanks very much!

    Could you please post an explain plan? I'm not quite sure what is the issue.

  • Multiple table of contents in one document

    I would like to create multiple table of contents in one document. It would look something like the layout below. Each of the documents is a standalone FrameMaker file. Is this possible? I'm wracking my brain for ideas. Thank you!
    Salome
    TABLE OF CONTENTS
    Group 1 Program
    Document: Alligator
    Document: Bear
    Document: Camel
    Document: Deer
    Document: Eagle
    Group 2  Program
    Document: Fish
    Document: Giraffe
    Document: Hippopotamus
    Document: Iguana
    Document: Jaguar

    lawrence,
    Pages will only accommodate one TOC, I'm sorry to say. The others will have to be generated manually.
    -Dennis

  • Multiple tables and templates in a main window

    Hi,
    Is it possible to have multiple tables and templates in a main window of a smartform?
    If so then how they are positioned in the main window? Means which table to come first and which to be the next?
    Thanks in advance.........
    Prinan

    Hi!
    both tables and templates can be printed any number of times ina  main window.
    The tables as in sequence are printed...after ending with the first it gets on to the another.
    If u want to print it under some cdonditions you can do it using the condition tabs.As per it is a main window the dats gets flowing to the next page so as the order goes thae data goes on printed.
    Regards.

  • Multiple Table of Contents

    I am using Captivate 5 and I am creating a course which will essentially contain 3 different version inside of it, I'm wonderign if it is possible to have multiple Tables of Contents within a single course?
    Thanks!

    I ran into a similar issue. Mine was a broad topic with "subchapters", for want of a better term. I wanted my users to be able to jump around within topics as needed and the simple TOC didn't cut it. Plus I had several slides during my simulation that were about 1 sec in length so I had several slides named "Cont." on the TOC...not very pretty. My workaround was to create my subchapters as separate projects and then pulled them all together in the aggregator. It wasn't perfect but it was close. I've added the ability to create sub-TOCs to the feature request page. Maybe I should bribe the Captivate developers with cookies???

Maybe you are looking for