Multiple TOCs for One Project

Is it possible to split the topics in one help project into
two toc (hhc) files? I have a master project that merges about 53
chm files. Some of the slave projects are rather large and over the
years have had several types of information added to them. The
information in the projects are related to each other, but they
need to be organized separately in the master TOC. Splitting the
projects themselves is not a good solution. I would like to have
multiple hhc files for the projects so that the topics can easily
be inserted in their logical place in the master TOC.

Hi,
I am TW working jointly with another TW on a huge multifirm
project for a same client. He is well versed in RH, while I am a
beginner (with using RH) not with TW. He and I each produce large
parts of what will be merged into a single huge context sensitive
.chm file. Having experimented a bit with possibilities such as the
ones you are exploring, I thought we could use it for our project.
But the other TW felt we would have problems down the road.
Just to confirm what John says. But then, I also am not
adding anything positive by way of solution. Hope somebody else
reacts to these two successive negative answers, and comes up with
help for you.
Daniel Garneau, CTM, CL
Technical Writer, Canada

Similar Messages

  • Using multiple harddrives for one project

    I'm about to purchase a new iMac and Final Cut Studio, and I have a question about harddrive setup. Currently, I have two external 320 GB harddrives I'm planning on using, and the iMac will come with an internal drive of 320 GB. This should be enough space to fit the estimated 468 GB of footage I'll have (36 hrs * 13 GB/hr for HDV is my calculation), but I've heard that there can be problems splitting a project across multiple harddrives. Should I upgrade the internal harddrive on the iMac to 750 GB so I can fit the project all on one drive?
    Thanks very much!

    Listen to what David said,
    don't use your internal disk as scratch disk, it will slow down your system, put it at an unnecessary risk .
    Are your drives FW connected or USB? If the case is the latter use your drives as back up drives and for more efficiency get at least FW400 drives and in the future do take into consideration bigger drives, 320 GB when editing video on a regular basis is peanuts.
    Here some suggestions:
    http://www.CalDigit.com/index.asp
    http://www.dulcesystems.com/html/products.html
    http://www.g-technology.com/Products/Products.cfm

  • Can you use multiple TOCs in one project at different times?

    I am new to RoboHelp and I have version 11. The premise is that I have inserted a map of the United States and I have placed and image map for each state to direct them to the individual state's topic I have created. But I want to customize each state's table of contents. Is that possible? If so how is it done? Any help is much appreciated.
    Thank you.

    Can we step back and clarify what you mean by customising each state's TOC?
    The image map takes the user to a topic for that state. If the project is set to keep the topics synchronised to their position in the TOC, the user will see what you have set up in that states chapter.
    What is it that you want to happen that is not provided by that?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Multiple plant in one project

    Dear PS gurus!
    Want to know that can we create one project having multiple plant, if yes ? how we will do costing?How to customize?
    plz let me know the concept.
    Ansar

    you can have multiple plants in one project
    there is no customising for this - the plant would be set up as part of enterpise customising
    the costing will be based on the WBS object assigned
    for eg you can have a project where some work is carried out in plant A and some work in plant B - projects can be cross plant the cost will be assigned to the WBS based on the actual postings but the WBS can have different plant assignments

  • Multiple Billings for Single Project

    Hi Gurus,
    Is there any possibility to do multiple billings for one contract / one project from Project Level.
    How can we perform for Milestone / RRB?  I appreciate with possible steps / process.
    Regards
    Naveen

    Hi Naveen,
    If i understood your query correctly, yes it is possible to do multiple billings for a single project, rather a single sales order.
    As far as Milestone/RRB process is concerned, i would suggest you to go through SAP Help or search the forum. The query is very basic in nature and i am sure you will find the required answers in SAP Help.
    You can revert with more specific queries once you are done with SAP Help.
    Regards,
    Gokul

  • Can you have multiple users for one account?

    Can you have multiple users for one account? if so how do you set it up.
    We are using it for our department and it would be great to see who created what form instead of it being all one name.

    Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
    More information on how to share :
    http://forums.adobe.com/docs/DOC-2462
    Information on how to copy a forms to a different account :
    http://forums.adobe.com/docs/DOC-1390
    Hope this helps
    Gen

  • How do i scan multiple pages for one attachment

    I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

    Hi dagda24,
    You can scan multiple pages into a single document with the scan to PDF option.  Use the following steps to do so:
    1.  Open MP Navigator.
    2.  Click One Clcik.
    3.  Click Save to PC.
    4.  Change the File Type from PDF to PDF (multiple pages).
    5.  Make any other changes as needed, then click scan.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How to open multiple sessions for one user?

    Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
    When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 1
    update my_table set col1 = 0 where row_id = 1
    select col1 from my_table where row_id = 1
    -- shows result is 0and then enter into the second worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
    I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
    Re: Help with Procedure
    Edited by: tem on Apr 18, 2012 6:44 AM

    Thanks Jim,
    Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
    This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
    I don't see an option for "Worksheet".
    UPDATE:
    OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
    select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
    Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
    Edited by: tem on Apr 18, 2012 8:00 AM

  • Multiple Values For one Condition in Choose From List

    I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

    Hi,
    Check this thread
    How to set a Multiple condition in a single CFL
    Hope that helps,
    Vasu Natari.

  • Multiple Labels for One Order

    Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

    Hi Aj
    Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
    I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
    I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
    PLease confirm your thoughts.
    Regards
    Jai

  • Multiple currency for one vendor

    Hi,
    Is there any way to have multiple currency for one Vendor?

    Hi Siva,
    Yes, It is possible to maintain multiple currency for one vendor. How ? The procedure as follows.
    During vendor creation using T-code XK01 and currency enter input data screen select Extra option on the top of the screen click and display  'Add Purchasing Data'  option click opened new screen and give input data plant, tick mark of the option Data retent.at plant level allowed and tick for OK.
    After that, you have enter multiple currency for the same vendor during vendor creation time, then you will create PO using T-code ME21N the currency field you have fill as you required currency by default first currency of vendor created will be display.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Multiple choose for one parameter

    Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
    Select ....
    where ....
    content.style IN (:p_style)
    (content.style is a column in table "content", and "p_style" is a bind variable)
    i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
    Li

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
    Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
    Select ....
    where ....
    content.style IN (:p_style)
    (content.style is a column in table "content", and "p_style" is a bind variable)
    i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
    Li<HR></BLOCKQUOTE>
    you can do that by flowing the stap
    at first you will write a select statement
    select ...
    From ...
    where Style (colomn name) = &style1
    then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
    then you write in after parameter form trigger...
    IF :P_style = 'All' then
    :style1 := null;
    Else :style1 := 'and style (style means your column name) = :P_style;
    end if;
    null

  • Multiple Vendors for one Document Number in BW

    Hello All,
    We are getting Multiple Vendors for one document in BW. In R/3, standard table and RSA3, we are able to see correct vendor where as when it is coming into BW it is showing incorrect vendor in PSA and Data Target.
    All issues are coming for Process Key 1 only.
    *For Example:*
    Document: 9400000007
    Schedule Line:1
    Doc Item: 1
    Vendor:
    0010019229 - Incorrect Vendor
    0010018962 - Correct Vendor
    Committed Quantity: 0
    Doc Type:
    ZNB
    ZNPP
    Process Key: 1
    Not sure how to upload screen shot.
    Please suggest.
    Thanks,
    Vijay

    Hi ,
    Are you loading for the first time ? If yes have you checked Transaction BF11 settings.
    Regards
    Rahul Bindroo

  • Multiple payers for one sold to party

    Hi All,
    Can we have multiple payers for one sold to party?
    Thanks

    Hi
    Yes, you can have multiple PAYER for one Sold-to-party (only in the Customer master).
    This Partner relationship is maintained in two places. They are,
    > Customer master ( sales area data > partner function tab )
    > Sales documents (at Header level and Item level)
    In Customer master data, you can have multiple partners ( e.g, multiple Payers) for one Partner function( e.g, SH,BP,PY).
    But in Sales document, you can have only one Partner for one Partner function.
    So, you can have only in Customer master data multiple pertners. So, first create the different Payers through XD01 ,choosing Account group "Payer".
    Then assign all those PAYERS  in the master data of the Sold-to-party by going in the change mode XD02 and save it.
    When you create the Billing document, system will give a pop-up of those list of Payers and you have to choose one . You can have only one Payer in one Billing document.

  • Project Report for One Project Using Excel

    Hi,
    Is is possible to create a report for one project using excel?
    I want to create a pdp with an Excel Viewer web part and have the following tabs with data specific to the one project.
    1. Cover
    2. Issues
    3. Risks
    4. Deliverables
    I tried passing the ProjUid to an Excel doc via the Excel Query Filter Web Part and was able to filter the Issues lists only but don't know if its possible to filter out the other tabs by using the same paramater. Is this possible?
    I have not looked at Odata but was wondering if it was possible to pass a paramater to the odata query and still have the spreadsheet work in a web view in SharePoint?

    Hi,
    I'd say that as far as you promote the Proj UID field as a filter in all sheets of your Excel workbook, using the Excel
    Query Filter Web Part should work fine. But testing it should be easy, since you already did half of the work.
    See excellent article from Andrew on this topic:
    http://azlav.umtblog.com/2012/12/05/filtering-excel-webparts-in-office-365-part-2/
    http://azlav.umtblog.com/2012/07/03/creating-a-project-resource-list-in-a-pdp/
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

Maybe you are looking for