Project Report for One Project Using Excel

Hi,
Is is possible to create a report for one project using excel?
I want to create a pdp with an Excel Viewer web part and have the following tabs with data specific to the one project.
1. Cover
2. Issues
3. Risks
4. Deliverables
I tried passing the ProjUid to an Excel doc via the Excel Query Filter Web Part and was able to filter the Issues lists only but don't know if its possible to filter out the other tabs by using the same paramater. Is this possible?
I have not looked at Odata but was wondering if it was possible to pass a paramater to the odata query and still have the spreadsheet work in a web view in SharePoint?

Hi,
I'd say that as far as you promote the Proj UID field as a filter in all sheets of your Excel workbook, using the Excel
Query Filter Web Part should work fine. But testing it should be easy, since you already did half of the work.
See excellent article from Andrew on this topic:
http://azlav.umtblog.com/2012/12/05/filtering-excel-webparts-in-office-365-part-2/
http://azlav.umtblog.com/2012/07/03/creating-a-project-resource-list-in-a-pdp/
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

  • Interactive Reports for Marketing Campaigns using HANA

    Dear Experts,
    We are Implementing Interactive Reports for Marketing Campaigns using HANA Hence, I request you all to help with the Config Steps  / any documents that help.
    Your Help is really appreciated.
    Thanks In advance
    Satish

    David,
    There are several drawbacks with the standard functionality that you will encounter:
    -  SAPconnect only supports HTTP url posting or RFC destination setup (which means you need a third party server program)
    -  The mail forms do not impose a limitation on the length of messages
    -  Target groups do not check if the person has a mobile number.
    If you look at SMS gateway providers they normally allow use via web service or SMPP.  If you plan on doing "bulk" campaigns where you will generate multi-thousand messages a month then you need to use one of these options.  SMPP is a binary protocol that is way too complicated for a business application to implement.  So web services is your best bet.
    If we used mostly standard CRM functionaliy we would do the following for SMS:
    -  Use the segment builder to handle our target groups
    -  Use the personalized mail functionality
    -  Use the open channel exits for segment execution to handle the communication to SMS gateway.
    Now keep in mind that for SMS campaigns this is going to be cubersome, and not going to provide all the mobile marketing functionality you need.  It still appears that even for CRM 52/2007 that mobile marketing is not really fully addressed in the solution with several major gaps.
    We ended up going down a custom route, because the segment builder was not-user friendly and unstable in CRM 40 and the mail form technology did not meet our needs for sending messages and creating template based scenarios.  We still make use of the CRM business partner master for the distribution.
    If you have any further questions on doing SMS campaigns with CRM, please let me know.  This is one area where I have spent some extensive research.  If you are looking for SMS gateway providers in the US, I can also provide some names based on our previous research.
    Thank you,
    Stephen

  • Dump while running a stock report for one year

    hi experts,
                        i'm getting  dump error while running a stock summary report for one year
            the error is as follows:
      A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the
       exception
      condition "CNTL_ERROR".
    regards,
    andrews.

    Hi Andrew,
    Did you try running the report for a smaller period of maybe a month. Check for any authorisation related issues.
    The dump has a lot of detailed and valuable information about the error. If feasible, post the dump data for further analysis.
    Regards,
    Pranav.
    Edited by: Pranav Mandelia on Sep 6, 2011 2:07 PM

  • Is there a limit to how many pages i can have for one website using muse/business catalyst?

    is there a limit to how many pages i can have for one website using muse/business catalyst?

    Thank you. I've been searching everywhere and I couldn't find anything the mentioned it. I appreciate the feedback!

  • Has anyone used more than one event for one project?

    Hi,
    I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it.  I waited to see if I would get used to it.  But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'.  The separation of the media and projects creates more problems than solutions with my workflow.
    The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same.  The new Event and Project system adds complexity to organization and archiving.  I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly.  I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
    Has anyone out there used more than 1 Event for 1 Project?  Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project.  I don't need to use the media from multiple Events for the same Project.  And I've never used it for a reason.  I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project.  I think we should bring back the connection between Events and Projects in a meaningful way. 
    This is a throw back to the older days, but that's not always a bad thing.  Let us keep our projects, or timelines, in the Events folder.  Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section.  Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
    Thanks,
    - David

    My original fear was that FCPX was just going to be iMovie Pro... It so is not!
    People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows.  For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder.  I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
    But that's me.
    Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
    Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
    By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.]  You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

  • Using multiple harddrives for one project

    I'm about to purchase a new iMac and Final Cut Studio, and I have a question about harddrive setup. Currently, I have two external 320 GB harddrives I'm planning on using, and the iMac will come with an internal drive of 320 GB. This should be enough space to fit the estimated 468 GB of footage I'll have (36 hrs * 13 GB/hr for HDV is my calculation), but I've heard that there can be problems splitting a project across multiple harddrives. Should I upgrade the internal harddrive on the iMac to 750 GB so I can fit the project all on one drive?
    Thanks very much!

    Listen to what David said,
    don't use your internal disk as scratch disk, it will slow down your system, put it at an unnecessary risk .
    Are your drives FW connected or USB? If the case is the latter use your drives as back up drives and for more efficiency get at least FW400 drives and in the future do take into consideration bigger drives, 320 GB when editing video on a regular basis is peanuts.
    Here some suggestions:
    http://www.CalDigit.com/index.asp
    http://www.dulcesystems.com/html/products.html
    http://www.g-technology.com/Products/Products.cfm

  • SD report for school project

    Hi Experts,
    Please may I get some guidance, I have a course work project as I am studying BW and I need to produce a report for a SD case.  The report needs to show the following:
    Characteristics
    Sales Organization
    Delivery Date (From/To)
    Shipping Point
    Sales District
    Vehicle Route
    Vendor/haulier
    Key Figures
    Delivered Qty (Volume)
    Delivered Qty (Weight)
    Delivered Qty (SKU)
    Shipment Cost Value
    I am taking the following steps to find the above:
    1.  In R/3 > SD look at datasources to find the fields required.
    2. Once datasources have been identified to transfer to BW and activate the business content
    3. Identify the cubes used by the datasource (AWB>Infosource and look at dataflow for the datasources I found containing required fields).
    For any GAP analysis identified I will provide field, table and user exit for ABAP programmer.
    Are these the correct steps?  Have I missed anything?  Also could someone please provide a template document I can use to write up the requirements as a blue print?
    Thanks for your help in advance, I will award points for help.
    Vic Kumar Manni

    Yes thank you, I was looking at all the datasources in SD so thanks for point me to these ones.
    As a starting point is it helful to look at Christopher Solomon tables and check for fields in SE11?
    Also, any tips for report layout/ blue print?
    Thanks,
    Vic
    Edited by: vic manni on May 27, 2008 6:02 PM

  • Single project report for Plan values, Budget values,commitments & actual

    Hi experts,
    Highly appreciated if any experts can let me know report which can be used to view Plan values, Budget values , commitments & actual values for each and every WBS levels for given project.
    I need one report to view all mentioned fields.
    Kind regards,
    Sam Lesha.

    Dear Amit,
    TX lot for your helpful  quick answer, I checked the report, it's fine and i need to clear one more thing .
    when i select Std profile as PS infor profile there i could find plan version 0 & 1. would it be  pssible to know how i can add one more plan versions to this.
    Tx in advance,
    Reg,
    Sam Lesha

  • Multiple TOCs for One Project

    Is it possible to split the topics in one help project into
    two toc (hhc) files? I have a master project that merges about 53
    chm files. Some of the slave projects are rather large and over the
    years have had several types of information added to them. The
    information in the projects are related to each other, but they
    need to be organized separately in the master TOC. Splitting the
    projects themselves is not a good solution. I would like to have
    multiple hhc files for the projects so that the topics can easily
    be inserted in their logical place in the master TOC.

    Hi,
    I am TW working jointly with another TW on a huge multifirm
    project for a same client. He is well versed in RH, while I am a
    beginner (with using RH) not with TW. He and I each produce large
    parts of what will be merged into a single huge context sensitive
    .chm file. Having experimented a bit with possibilities such as the
    ones you are exploring, I thought we could use it for our project.
    But the other TW felt we would have problems down the road.
    Just to confirm what John says. But then, I also am not
    adding anything positive by way of solution. Hope somebody else
    reacts to these two successive negative answers, and comes up with
    help for you.
    Daniel Garneau, CTM, CL
    Technical Writer, Canada

  • How to generate a project report for a BPM project in Oracle Jdeveloper 11g

    Hi,
    Till Oracle 10g we can generate a project report by right clicking on project name in BPM studio project navigator.
    Is this facility available with Jdeveloper 11g for BPM project as I am not able to generate the report.
    If this is possible than please let me know how can i generate.
    Thanks
    GG

    Hi there,
    I would also like to know when the Project Report functionality will be available for 11g.
    My client have several BA's who are crying out for documentation and exported diagrams, which are exactly what the Project Report features provided.
    Any ideas if it will come back?
    Cheers,
    Chris

  • Cost report for the project

    Hi,
    Which report will show the material cost, Equipment cost, Resources cost & Activity cost for the Project.
    Prashant

    Hi,
    If you need actual cost, then CJI3 should be OK.
    Kind regards, Aleksandra

  • Profit & loss reports for a project in PS

    Hi,
    does anybody know how to calculate profit & loss for a project and which reports show this?
    Thanks
    Long

    Hi,
    I run OPUR and saw some entries there, but while while selecting the the database profile for that particular report I don't know how to "go to change DB Profile"
    can you show me step by step to to this
    Thank you
    Long nguyen

  • Multiple Project Scheduling for the project at a same time

    Hi Experts,
    Is it possible to schedule multiple projects together at a same time. As my client is having more than 5 customer project running all together and he wants to schedule all the projects together so that there is no dates overlapping for similar activities for multiple project. As the activities are dependent on labour and machine and at one particular time the resource could be devoted either on one activity of the project.
    I look forward for your revert
    Thanks and Regards
    Simon

    Hi
    One more thing, when i am changing the dates of the activity due to delay from customer end, then where can i see the comparison of old dates and new dates.. though i can see the report in CJ29 but when i change the date in the activity then in the report it shows new date in the new and old date column and does not display the old date in report in the old date column..
    Please let me know if i need to do any configuration for that
    Regards
    Simon

  • Manual creation of Project Site for a project is taking old project site template.

    Dear All,
    I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
    For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
    But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
    Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
    Example to get the issue in an easy way:
    ProjectA:
    Project Site: http://epm/pwa/ProjectA
    Issue List:
    Column: Category [data type as Choice: Cat1, Cat2, Cat3]
    Have saved 1 project site as a template and associated with an EPT with the following changes:
    Column: Category [data type as Choice: Choice1, Choice2, Choice3]
    Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
    So, it should take the modifications in the project site.
    But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
    Regards,
    Shravan

    Dear Guillaume,
    Thanks for your response.
    Please seem my comments inline:
    Which Project Server version do you use?
    PS 2010
    It is working well and as expected for all projects except for 1 specific project?
    Yes. It is working well for other projects except 1 project.
    Has this project something particular?
    Nope. It is similar as other projects.
    How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
    First I have modified 1 of the project site and saved that site as a template.
    Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
    Regards,
    Shravan

  • Purchasing report for one time vendor

    Hi,
    I am using ECC 6.0
    What standard report is available to display purchase order, GR and invoice belonging to one time vendor (CPD account group) ?
    Thanks for your help.
    Kind regards,
    Yann

    Special GL transactions (like down payments) are not allowed for one-time vendors.  Please refer to the following SAP Note.
    https://service.sap.com/sap/support/notes/19638

Maybe you are looking for