Multiple track (or region) selection for mass editing and deleting.

My project has multiple tracks, and it is too long. So I'd like to be able to select multiple tracks and then remove regions across multiple tracks in one move rather than having to delete regions track by track, and then moving them back to close the gap (which is a time consuming pain)
Is this possible?
Many thanks

http://www.bulletsandbones.com/GB/GBFAQ.html#selectmultipleregions

Similar Messages

Regarding SELECT FOR ALL ENTRIES AND DELETE ADJACENT DUPLICATES

Hi,
i got few doubts.....
    1) Is it necessary to DELETE ADJACENT DUPLICATES when we perform a SELECT FOR ALL ENTRIES ? because for all entries itself eliminates the duplicate entries?
   2) Wat Sy-subrc returns after a SELECT FOR ALL ENTRIES statement?
   I found some code where these are used
           SORT ITAB[] BY NEWKO[].
          DELETE ADJACENT DUPLICATES FORM ITAB[].
SELECT buknr
               kunnr
FORM KNB1
    into table ITAB_KNB1
FOR ALL ENTRIES IN ITAB
    where kunnr eq itab-newko.
Regards.
Maehsh.

Hi Mahesh,
To be more specific, first you should delete "adjacent duplicates" using the sorting key ( here : NEWKO ), if Itab contains other fields.
SORT ITAB[] BY NEWKO[].
DELETE ADJACENT DUPLICATES FORM ITAB COMPARING NEWKO.
You can delete or not the duplicates, but, you must know that if you don't delete them in the Itab, you will retrieve them in the ITAB_KNB1.
Concerning the return code, it works like for the "SELECT" ( 0 = entries found / 4 = no entrie found )
=> One more thing, it's better check :
Check not ITab[] is initial
because, if the Itab is empty, you'll retrieve all the record of KNB1 !
Hope this helps,
Erwan.
Message was edited by:
        Erwan LE BRUN

Create Separate Views for New,Edit and Display forms in Infopath

Hi,
I need to create a separate views for New, Edit and Display forms in infopath.
For ex : I need a Submit Button on Display form and not in New/Edit forms.
I tried, but i amnot able to get the changes.
Regards, Shreyas R S

I just validated my approach in a 2013 farm, this is precisely how it's done!
Step 1) List > Display Form
Step 2) Change the View within the Web Part Properties. In your screenshot it looks like you simply went to View Item on the single item, which is not the direction I gave =P.
**Assuming you've already created the multiple views within InfoPath, this allows you to set them up as distinct defaults for New, Edit and Display, let's make that clear. If you are not even to the point of having separate views, that is just in InfoPath,
Page Design tab, far left, New View button

How to set up a server for PPro editing (and AE finishing)?

Hello everyone,
I may be a bit offtopic with this question, but at the same time it's really related to PPro.
I never worked in any post-house facility, and I come from a very indy background, so I never had a chance to see any edit suite hook up to a server.
I am wondering how great it is, how it could help our projects? And also what are the basics to know, the stuff to avoid when you're a newbie like me (in term of server network settings)?
Right now, we're running 3 Mac Pros to edit our projects. They are all connected through Gigabit ethernet.
Our workflow involves that all Mac have the entire footage in there own drives. We're using the network only when importing new content to copy it on the 2 other Machines.
We found out that if we use Mac #1 to open a PPro project contained within Mac #2 drives (as well as the footage), it's okay but the performances are not as great as opening a project in its own drives.
So we try to copy (move) the projects in the right Mac before to work on it. Of course, everytime, we have to relink everything if we don't want Mac #1 to read the footage from Mac #2…
When it come to big projects, with lots of Red footage, it is a pain, and we usually end up using only one master machine for the edit, and it's only when it comes to finish in AE that we really start to split the project onto the 3 platforms.
So this is where the idea of a server comes in mind. Mac #1 would work on a project A, then when moving to work on project B, Mac #2 could open project A and keep working on it - no relink: the project AND the footage are all on the server.
That is my basic idea. Sound simple, but really I have no idea if it really works. Is it something I can really do on a server?
How the server really helps to keep the performance? If I see PPro's performance lowering down when accessing projects and footage from our actual simple network, is it going to be better accessing the same datas from a dedicated server.
I'm looking at the Mac Mini server with Lion Server. What Lion Server does that Lion OS doesn't do already?
I know, it sounds like completely newbie questions, but I honestly have no idea.
Can a Mac Mini with Lion Server serve the 3 Macs running Snow leopard? Or do we need to update them?
My idea is to use Pegasus thunderbolts for storage drives, plugged in the Mac Mini, then plug all the 3 Mac into the Mac Mini, with what I believe should be Gigabit Ethernet…
Am I right? A least a bit? What did I miss?
Thanks in advance for sharing your knowledge guys
Julien

If you are going DIY route, this is your only option: http://magazine.creativecow.net/article/build-your-own-affordable-san-that-iworksi
However that probably won't work with RED footage.

Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Yes.
Can one also print wirelessly with an old HP C6280 printer?
Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

What preset MacBook pro would be better for video editing and eventually college?, What preset MacBook pro would be better for video editing and eventually college?

Hi,
I am thinking about getting a MacBook Pro. My current computer is very very old and can not be used. I would like to use it for video editing and eventually to use when I go to college. I want to get one of the preset 13 inch MBPs. I do not know which one will be better for my purposes. Could anyone please help me??

Any computer made today, Windows or Mac, will be MILES ahead of what you are now using.
Raw CPU speed is not the total benchmark of a computer. Look at it this way. A 2.6GHz CPU made today is much faster then a 2.6GHz CPU made just a few years ago, like 3 years ago. the difference between a 2.6 and a 2.9GHz CPU is 3 tens of 1 GHz, 300MHz. The percentage difference is about 8-9 percent (.08-.09). Back when CPUs were listed in MHz, 120, 300, 600, if you have a 300MHz CPU and you replaced it with one that was 300MHz faster that was a Big Jump. You doubled the computing power. Today 300MHz, .3GHz, is next to nothing. Especially for the price jump.
Note that when you make the switch you will either need to update your program, that means Re-Buying most of them, to work on the Mac OS or install a version of Windows in either a Boot Camp partition, Dual booting the Mac, or into a Virtual Machine software program to run the Windows version of those program.
If you decide on a Mac buy the BASE model that is offered for the CPU speed you want. The RAM and hard drive can be upgraded by you for much less then what Apple charges for those upgrades. With the hard drive if you upgrade it to a larger and faster drive, Apple supplies 5400RPM drives, like a 7200RPM drive you get to Keep the original drive to use in any way you like. Like an external drive.

I am 12 and want a 13 inch Macbook for video editing and stuff I cannot do on my iPad.

I need a Macbook for video editing and stuff I cannot do on my iPad (flash web browsing, iMovie or Final Cut Pro for YouTube, small games, photoshop, Reaktor 5, etc). I was thinking of buying the MacBook Air 13" refurbished intel core i5 for $999. I can pay up to $1,300 so I was thinking of getting the 13" MacBook Pro with retina display refurbished intel core i5 for $1,260. But then I couldn't buy many accessories or AppleCare. I do not really want to buy the non-retina MacBook Pro because it is not as portable and I am only 12 but I don't know much about how heavy it is because there is no apple store where I live but this is why I came here. So which MacBook should I buy? (I am probably going to wait until the new MacBooks in June 2013)

Hilary:
Welcome to Apple Discussions.
Congratulations on your upcoming graduation and the really wonderful gift you anticipate from your parents. Unfortunately, I am unable to give you information about upcoming Apple products or promotions, as I honestly don't know.
All my purchased music, and games, and videos, etc are on the computer I am currently using. Is there a way to transfer all of it to my new MacBook I will be receiving?
If the computer you are currently using is a Mac, yes, it can be transferred. One of the difficulties with the new MacBook is that it does not have any firewire ports, which will make networking a bit of a pain, but it can be done. Post back after you have your new computer with specs and we will give you directions on how to do it.
And are they going to make a new Macbook? So should I wait?
While I do not have any specific information about upcoming products, it is fairly certain that Apple will be coming out with new products. Of course this is a continuing process so you can be waiting for a long time. I would, personally, go ahead and get one now, and that should certainly see you through college. By then who know what wonderful products will be available!
Please do post back with further questions or comments, if you have any.
cornelius

Using an External Hard Drive for iMovie Editing and Burning to DVD

Between iPhoto, iTunes and other applications I am rapidly running out of hard drive space on my 2003 iMac. Because of this, I recently purchased a Lacie 250 GB Firewire external hard drive and was hoping to use it for iMovie editing and buring of DVDs, because of the large amount of disk drive space video eats up. Is it it possible to "load" iMovie and iDVD to the external drive and edit/burn videos on that drive? If not, is there some other way to use that external drive in this process? Thanks in advance for any assistance that can be provided.

Scooper
see my reply to Trollus, just posted:
That's how I do all my stuff now - via external lacie 'brick' drive. The only trick is when you begin your iMovie project, hit save immediately after creating the new project, and save the project file in an appropriately named folder on the external hard drive (don't call it 'Movies' as it'll be confused with your Powerbook's movies folder). Then as you import all your clips from your movie camera, they will be written to the external drive, rather than you G4's drive. Very handy.
I do all my iMovie and iDVD stuff via the external Lacie drive - the FireWire 400 interface is quick enough (ie never had skipped clips, etc). I also save all iDVD finished projects as disc images on the external drive and burn DVDs from those at slow speed via Disc Utility. No coasters...:-)
Greetings from Canberra
Dave
iBook G4 Mac OS X (10.4.8)

I would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

i would like to make an upgrade from creative suite cs5 to cs6 what is the price for student edition and what i have to do, i do not found in your website price

There are no upgrades for student editions. You simply buy a fresh license at the discounted price.
Mylenium

What is the best Apple notebook for video editing and pro music creation?

What is the best Apple notebook for video editing and pro music creation?
I know I could opt for the most expensive and probably get what I want that way, but I´m not made of money, so what are your suggestions for minimum criteria and which would you recommend?

MacBooks Pro are great Macs with a good hardware, so all of them will work for the use you want, but I think that you want the biggest display possible because of your uses. In this case, it has to be a 15-inch non-Retina MacBook Pro, with the settings you want. Note that, after buying the Mac, you can upgrade the HDD and memory without voiding the warranty, so you are free to install as much memory and the HDD size you want after buying it. It's my opinion, but you are free to do whatever you think it's better

Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

You are asking two different questiions:
1. What's a good photo editor? Answer to that here is probably obvious.
2. What's a good desktop publishing/page layout program for creating PDF files for production? Answer, not PSE. It's a photo editor, not a page layout program.

I don't know what to order. I want PS for photo editing and some composting. I don't do any website work or sharing yet. I have been using elements for a few years and also have Lightroom 5 on my desktop. I don't want to spend $1000s for a bunch of stuff

I don't know what to order. I want PS for photo editing and some composting. I don't do any website work or sharing yet. I have been using elements for a few years and also have Lightroom 5 on my desktop. I don't want to spend $1000s for a bunch of stuff I don't use. Any advice on what to buy?

Well, there is a whole world of free or affordable software out there like GIMP, PDPaint and similar. Otherwise if you want to stick with Adobe stuff signing up for the CC photography program would be the most cost-efficient way...
Mylenium

What's the best App for downloading, editing and saving Microsoft Excel spreadsheets please?

What's the best App for downloading, editing and saving Microsoft Excel spreadsheets please?

You can have a look at Quickoffice
http://i1224.photobucket.com/albums/ee374/Diavonex/74fb0e85.jpg

Any BAPI available for mass creation/change/delete for dependency net

Hi guys,
Any BAPI available for mass creation/change/delete for constraints in dependency net. I mean any uploading option in mass for creation, change and delete.
Regds
Regds

Hi,
Check if the below FM's meet your need:
CAMA_CNET_CONSTRAINT_MAINTAIN
CAMA_CONSTRAINT_NET_MAINTAIN
CAMA_DEPENDENCY_MAINTAIN
Regards,
Vivek

After upgrading to OS 8.1.3 on iphone 5, suddenly all contacts have facetime and ring on both my ipad and iphone. Went to Contacts and Facetime to Edit and delete, but no field to do so. How can I delete Facetime from all these contacts?

After upgrading to OS 8 on my iphone 5, suddenly all my contacts had Facetime capabilities. I only want to FT with a few people Unwanted FT calls now ring on both my iphone and ipad. I tried to edit and delete FT capabilities in both Contacts and Facetime icon, but there is no field to delete for this. How do I delete Factime from my contacts list? thanks for any help with this.

Hi Ingo 2711,
Thank you for your suggestion. I backup on itunes. I went to itunes, deleted syncing my contacts, then re-synced them. But the Facetime capability option continues to be there on most (not all, for some curious reason) of my contacts. I am not sure I posed my question correctly. I want to be able to FT with my family, so don't want to delete the FT capability totally from my iphone and ipad. But I don't want all these other iphone calls from various contacts to ring on my ipad as FT calls. I want a way to select with whom I have FT capabilities. Any further suggestions? Thanks much, trekpal

Multiple track (or region) selection for mass editing and deleting.

Similar Messages

Maybe you are looking for