Multiple users identified when only one on the machine - me

I am experiencing very slow internet communication and when trying to download latest App from Apple the guidance tells me that I need to shut down 'multiple users' when I am the only user shown on our machine. We did suffer a power cut a few days ago when the computer was being used. Would this 'upset' the system into thinking that it is still in use by the 'other user(s)' - is it possible to 'reset' to in effect clear this - I am using TimeMachine.
Normally I get good but not brilliant internet response but since the power cut we do seem to be running very slow - well that's out anaylis so far but any other suggestions as to how to get back to normal would be welcome.
I have run MacKeeper to see if it can find anything untoward.
Rodney

Hi Rodney
Let me address your issues in reverse order.
First, Mackeeper is extremely bad software, and is very often the cause of slow Macs. My recommendation is that you uninstall it immediately, and see if that improves your speed.
http://help.mackeeper.zeobit.com/Manual/GettingStarted/UninstallingMacKeeper.htm l
Next, can you describe what "app" you are downloading from Apple? Is it a software update?
How much hard drive space do you have available? Click cmd-i on your Macintosh HD shortcut and look at the "available" value.
It would be helpful if you could include your version of OS X in your profile. You say "iOS 7" which is iPhone/iPad software, not Mac software.
Matt

Similar Messages

New Jabber user cannot see (only) one of the added buddies

Running ichat server, just a handful of OD users. OD is on the same machine as Ichat server. Nothing is limiting the use of Ichat by any of the OD users. Server G5 10.4.9, Clients managed Intel Imacs 10.4.9
Added a new user.
New user can add buddies in the Jabber List.
New user can see all but 1 of them in the List.
One of the buddies, lets say UserX, can see the new user in her Jabber List.
No matter what we have tried from within Ichat the new user cannot see UserX.
Both users are members of the same groups and have matching access abilities.
Any suggestions. Thanks for looking at this.

New user can see all but 1 of them in the List.
If I understand it this correctly, 'new user' can see all other buddies except one. And all the other users can see this buddy.
Lets call the new user "userX" and the one they cannot see "userY" and lets call your ichat server "jabber.myserver.com"
The configuration files for users buddylist is stored in the spool di rectorywhich you can find at /var/jabber/spool/. In there you will find a directory the matches the name of your ichat server. For me that is jabber.clayford.com. In this directory you will find one xml file for eash user of ichat server. Their file name is the OD logon name for the server.
Stop the ichat server service and make back up of any files you edit before you start.
Open the file for "userX.xml" In this file you will see some xml code that starts <item jid='[email protected]' subscription='xxxxxx'>. there will be a number of them, one for each buddy.
Mke sure the xxxxxx is the word 'both' [with the quotes] and if the text ask='subscribe' exists in that line before the >,remove it. So that definition should now be: <item jid='[email protected]' subscription='both'>.
Save the file and now open the file userY.xml and check that the item <item jid='[email protected]' subscription='both'> exists.
Restart the ichat server and the problem should be fixed...

Have multiple users but want only one iphoto library...

How do I set up my accounts so that there is only 1 iphoto library on the machine?
I don't want to worry about whether pictures were downloaded from camera by me or my husband.
Thanks in advance.

If you have an external drive, put the library there and use Get Info to "Ignore ownership on this volume." You will each have equal access to the library.
If you don't have an external drive, you can do the same thing with a partition.

Why does the Error: 500 SC_INTERNAL_SERVER_ERROR appear when multiple users access my JSPs but does not occur when only one user accesses my JSPs?

When multiple users run my JSP application, why do some users get an Error: 500 SC_INTERNAL_SERVER_ERROR for certain JSP pages with the error message No such file or directory. The JSP listed on the Error 500 page varies and is not always the same. When only one user runs my JSP application, the problem does not occur?
The database connection is held when the user logs in or accesses certain parts of the JSP and then is immediately released. No connections to the database are held.
We are using Solaris 8 with MU_6 plus recommended patches.
Enterprise Ultra 250
iAS 6 SP 3

Is anything showing up in the KXS or KJS logs?
It sounds like you might having some kind of thread safety issue with your code. Either that or your guess about running out of database connections.

Add multiple users to a certain database in the SQL server in one go

I wonder if there is any method to add multiple users to a certain database in the SQL server in one go and without using transact code.
I can add a single user to a certain database “Q” for example by right click on the user “U1” for example then properties then in user mapping tab select
the database “Q”, so there should be a method to add multiple users ( U1,U2,U3…) to this database?
Best Regards,
Ahmad

Many thanks Visakh16,
I can do this using the below script, but what I am searching for is do to this without any scripting.
USE TestDatabase; --Make sure you have the right database
DECLARE @sql VARCHAR(MAX) = '';
SELECT @sql = @sql + 'CREATE USER ' + name + ' FOR LOGIN ' + name + ';
' +
'GRANT CREATE TABLE, CREATE PROCEDURE, CREATE VIEW, VIEW DEFINITION TO ' + name + ';
FROM sys.server_principals p
WHERE p.type in ('S','U') -- SQL Logins and Windows Login. Do not change!
and p.name in ('U1','U2','U3'); -- List of names to add. alter to suit
PRINT @sql; -- Show the statements being executed in the messages pane
EXEC(@sql); -- Run the statements that have been built
Thanks,
Ahmad

Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
GB

Restricting the user to access only one view in or database

A user wants to create a database link , so that he can view one of our views. We want to restrict permission, so that he can access only that view, and not any of our tables. What is the best way to proceed?
Thanks in advance,
Gayatri

Pl do not post duplicate threads - Restricting the user to access only one view in or database

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

An external hyperlink should handoff to Safari and leave iBooks.
If that's not happening, perhaps there is something misconfigured on your iPad? Have you manually confirmed those links work in Safari on your iPad?

Is it possible to enable to VSS with 6500 chassis when only one chassis have the WISM ?

is it possible to enable to VSS with 6500 chassis when only one chassis have the WISM ?

thank you very much for the reply, that mean both the chassis no need to have the same modules installed on both the chassis .

Snow Leopard brand new iMac, several user accounts: some Safari pages show aaaaaa instead of text for only one of the users

Snow Leopard brand new iMac, several user accounts: some Safari pages show AAAAAAAAAA instead of tex, but for only one of the users

Check out this thread. https://discussions.apple.com/message/11938010#11938010

Spry menu bar -- only one of the submenus of a drop down set works.

I created a spry drop-down menu bar for navigation within my site for a special event (on October 19). Most items have only one filie (e.g., tickets) but some of the items (e.g., Historic Homes) have up to 8 sub-items.
I renamed the spry file. I defined all my menu and sub menu items using the dialog box. I styled the bar for both basic state and "hover."
So far, so good.
I then created multiple new pages by using "Save As" (the original menu bar file)-- substituting appropriate text to to make the additional item and sub item files.
But when I link it all up and test it, only ONE of the submenus work. The menu disappears from the other sub menu pages when I navigate to them. Users can't get back to the original menu choices..
This is the first time with a Spry Menu bar.
Can you help?
Susan

Without seeing your code, I'm guessing your lists and sub-lists are not properly coded. Check your HTML & CSS with the validation tools below:
Code validation tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Seeing multiple iPhoto libraries when I click on the iPhoto icon in the dock?

I can't figure out why I am seeing multiple iPhoto libraries when I click on the iPhoto icon in my dock. I am running Lion on an early 2008 MacBook Pro (4 GB RAM), and when I click and hold on the iPhoto icon in the dock, it brings up a dialog box. From top to bottom, this is what I see:
iPhoto Library
iPhoto LIbrary
iPhoto Library
Options
Show Recents
Open
I can't figure out why it shows three iPhoto libraries when I only have one on my computer. I've tried deleting the icon from the dock and then putting it back in the dock, but it still shows three libraries for some reason. If I search for iPhoto in spotlight search or in finder, it only shows one iPhoto (in the applications folder). Any help on how to resolve this weird issue would be much appreciated!

I have the same issue. I see four iPhoto libraries when I right click on the iPhoto icon in the dock, but I only actually have two libraries. The other two simply do not exist on my computer. And when I click on the libraries that do not exist, obviously nothing happens. In the image, only the bottom two libraries are actual photo libraries. The top two do not exist.
I have relaunched Finder, restarted the computer, and even restored the entire computer from my Time Machine backup. Nothing changes. No matter what I try, the non existent iPhoto libraries continue to be present when I right click the iPhoto icon in the dock. BTW, there are only two iPhoto libraries in the pictures folder.
This is very frustrating and annoying.

Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?

Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?
IPads and iPod Touches don't seem to have the same media copying restriction that my iPhone has. My main computer is at home. I have music at home and at work and sometimes I like to add it to my iPhone from work. I can do this no problem using my iPad or my iPod touch, but when it comes to my iPhone, I can only copy music to it from my main computer.
Why would the iPhone have this restriction but not the other two devices?
ps. Where's my "add currently playing song to playlist" button? I can't even find a third-party music app with this feature.

Because...!
I've no idea why either.
Although it isn't normally possible to sync an iPod/iPad/iPhone with two computers (or manually manage an iPhone from more than one) it can be achieved if all computers have copies of the self same library. See Re: how do i sync on a second laptop without the data on my iPhone 5 being erased?
tt2

PLS-00103: Encountered the symbol "SELECT" when expecting one of the follow

Can any one tell me why I an getting compile error in Trigger with the following code (see below for the error message). Error is indicated in the IF statement Select clause.
Code:
-- AUdit Code Begin
-- Note: Ony for those tables having 'AUDIT' UDP
-- Value set to 'T'
IF (Select Count(*) From DBConfiguration
Where ConfigurationCode = 'AUDIT' AND
ConfigurationValue = 'T') > 0 THEN
WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
:old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
:old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
:old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
End;
WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
:old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
End;
WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
:old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
:old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
:old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
:old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
End;
WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
End;
End if;
-- Audit End
Error:
95/5 PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternativ
97/39 PLS-00103: Encountered the symbol ")" when expecting one of the following:
* & - + ; / at for mod remainder rem <an exponent (**)> and
or group having intersect minus order start union where
connect || multiset

Here is the code:
-- AUdit Code Begin
-- Note: Ony for those tables having 'AUDIT' UDP
-- Value set to 'T'
IF (Select Count(DBConfigurationValue) From DBConfiguration
Where DBConfigurationCode = 'AUDIT' AND
DBConfigurationValue = 'T') > 0 THEN
WHEN (:new.WORKREQUESTSTATUS <> :old.WORKREQUESTSTATUS)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSTATUS',
:old.WORKREQUESTSTATUS,:new.WORKREQUESTSTATUS,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCE <> :old.WORKREQUESTSOURCE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCE',
:old.WORKREQUESTSOURCE,:new.WORKREQUESTSOURCE,:new.UserId)
End;
WHEN (:new.WORKREQUESTSOURCEID <> :old.WORKREQUESTSOURCEID)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTSOURCEID',
:old.WORKREQUESTSOURCEID,:new.WORKREQUESTSOURCEID,:new.UserId)
End;
WHEN (:new.WORKREQUESTDESC <> :old.WORKREQUESTDESC)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDESC',
:old.WORKREQUESTDESC,:new.WORKREQUESTDESC,:new.UserId)
End;
WHEN (:new.WORKREQUESTDATE <> :old.WORKREQUESTDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTDATE',
CAST(:old.WORKREQUESTDATE AS varchar2(256)),CAST(:new.WORKREQUESTDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTOWNER <> :old.WORKREQUESTOWNER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTOWNER',
:old.WORKREQUESTOWNER,:new.WORKREQUESTOWNER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPCODE <> :old.WORKREQUESTAPPCODE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPCODE',
:old.WORKREQUESTAPPCODE,:new.WORKREQUESTAPPCODE,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPROVER <> :old.WORKREQUESTAPPROVER)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPROVER',
:old.WORKREQUESTAPPROVER,:new.WORKREQUESTAPPROVER,:new.UserId)
End;
WHEN (:new.WORKREQUESTAPPDATE <> :old.WORKREQUESTAPPDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTAPPDATE',
CAST(:old.WORKREQUESTAPPDATE AS varchar2(256)),CAST(:new.WORKREQUESTAPPDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.WORKREQUESTCOMMENT <> :old.WORKREQUESTCOMMENT)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'WORKREQUESTCOMMENT',
:old.WORKREQUESTCOMMENT,:new.WORKREQUESTCOMMENT,:new.UserId)
End;
WHEN (:new.CLOSEDATE <> :old.CLOSEDATE)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'CLOSEDATE',
CAST(:old.CLOSEDATE AS varchar2(256)),CAST(:new.CLOSEDATE AS varchar2(256)),:new.UserId)
End;
WHEN (:new.ANALYTEKEY <> :old.ANALYTEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'ANALYTEKEY',
CAST(:old.ANALYTEKEY AS varchar2(256)),CAST(:new.ANALYTEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.SUBPURPOSEKEY <> :old.SUBPURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'SUBPURPOSEKEY',
CAST(:old.SUBPURPOSEKEY AS varchar2(256)),CAST(:new.SUBPURPOSEKEY AS varchar2(256)),:new.UserId)
End;
WHEN (:new.PURPOSEKEY <> :old.PURPOSEKEY)
Begin
Insert INTO ADAMChangeAudit (ADAMChangeAuditKey,AuditTable,AuditRecordKey,AuditColumnName,AuditOldValue,AuditNewValue,AuditUser)
VALUES(ADAMChangeAuditKey.NextValue,'WORKREQUEST',:new.WORKREQUESTKEY,'PURPOSEKEY',
CAST(:old.PURPOSEKEY AS varchar2(256)),CAST(:new.PURPOSEKEY AS varchar2(256)),:new.UserId)
End;
End if;

PLS-00103: Encountered the symbol "" when expecting one of the following:

Hi I am creating trigger using CFQUERY tag of cold fusion on oracle..
<CFQUERY DATASOURCE="CRM">
create or replace trigger AWC_ACCESSROLESID_TRI
before insert on AWC_ACCESSROLES
for each row
begin
select AWC_ACCESSROLESID_SEQ.nextval into :new.AR_ID from dual;
end;
</CFQUERY>
But the created trigger is not compiled, it is giving the following error
"Line # = 1 Column # = 6 Error Text = PLS-00103: Encountered the symbol "" when expecting one of the following: begin case declare exit for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge <a single-quoted SQL string> pipe The symbol "" was ignored."
If I edit that trigger in enterprose manager console by pressing space and compile that, it is working fine with out any error. If i run the above statement in sql *plus, It is working fine with out any error.
Can you please tell me why this is happening if i run it using cfquery tag and also the possible solutions.
Thanks in advance,
Vinod

So it works in Enterprise manager. It works in SQL*Plus. It doesn't work in CFQUERY. Sounds to me like a ColdFusion problem rather than an Oracle problem to be honest. Aren't there any ColdFusion support resources?
Cheers, APC

Multiple users identified when only one on the machine - me

Similar Messages

Maybe you are looking for