Multiple values for one key in hashtable k, v

So, I know that java.util.hashtable (as of Java 1.5) uses separate chaining to handle collisions. What I want to know is how to get a certain value somewhere in that bucket if they all share a common key? Javadoc says I have to search it sequentially but doesn't say how.

OK, there's a lot of confusion on here for such a short thread :-)
Firstly, HashMaps pick which "bucket" to store your object in based on the hash value of your object (see Object.hashCode()). However, the actual object equality test (applied to the keys during a search) is based on Object.equals(). Therefore which bucket your object is in is irrelevant - the bucketting concept is just used as a way of quickly locating a subset of all the keys in the map which might match your search value. There could very well be just a single bucket in a map and it wouldn't change its logical behaviour.
This statement: "any Map including Hashtable, can only have a single (key,value) pair" is poorly worded. What it should say is that for any given key, a map can only hold a single value.
Really, you don't need to think about the internal structure of maps (i.e. buckets, etc.).
If you want to store multiple values for any given key, then make your value a list (java.util.List) and store your multiple real values inside that list.

Similar Messages

Multiple Values For one Condition in Choose From List

I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

Hi,
Check this thread
How to set a Multiple condition in a single CFL
Hope that helps,
Vasu Natari.

Multiple values for one variable?

I've created my first set of variables (using Form Properties>Variables), tweeked some XML sourcecode and they're working .
What I'm now trying to figure out is how to have one variable that has 2 values that pop up in 2 different text fields.
Simple form at this point:
Item, Model and Service Tag.
The user selects the item from the drop down list and the Service Tag field is autopopulated from the variables I set.
How do I get the Model to appear based on the Item selection?
I tried putting the two values for one variable together but both values appear in the same field.
Variable info that works: Scan (variable) = MC3090BT (value)
I also need this particular variable to = Handheld scanner (try to ignore the redundancy).
I attempted to make MC3090BT as it's own variable with Handheld scanner as it's value, and add to the code below but it didn't work.
Here's some of the code if it helps:
<event activity="change" name="event__change">
               <script contentType="application/x-javascript">if(xfa.event.newText == "Handheld scanner"){
    servicetag.rawValue = scan.value;
}else if(xfa.event.newText == "Latitude X1"){
    servicetag.rawValue = X1.value;

Hi, I am trying to do the same thing..passing multiple values to receiving query variable through RRI. Right now if I assign a query variable of type multiple single values it does not take any value. It works only if I assign variable of type Single Value.
In my assignment details the sender query has Generic for type and * for selection type.
If any one knows how to pass multiple values to receiving RRI query, please give the details.
Thanks

Create URL with multiple values for one parameter

Post Author: cbamberg
CA Forum: General
While I have no problems to create the URL to open a report with a single value for a parameter from my Java application, I don't know how to format multiple values for a parameter when I want to pass the "&prompt0=" value. The values I want to pass are numbers, not strings.
Anyone can help?

Hi gayatri,
you need to select both the product id and custname.put a count on the prodid column and write a condition of count>1 and apply it.
Thanks
Hari

Need to concatonate multiple values for same key columns into one string

Hi...I'm attempting to use PL/SQL to read through a table containing more than one column value for a set of keys, and concatonate those values together into one string. For example, in the STUDENT table, for a STUDENT_ID there are multiple MAJORS_ACCOMPLISHED such as History, Biology and Mathematics. Each of the majors is stored in a different row with the same STUDENT_ID due to different faculty DEPARTMENT values.
I want to read through the table and write out a single row for the STUDENT_ID and
concatonate the values for MAJORS_ACCOMPLISHED. The next row should be another STUDENT_ID and the MAJORS ACCOMPLISHED for that student..etc.
I've hit a wall trying to use cursors and WHILE loops to get the results I want. I'm hoping someone may have run across this before and have a suggestion. Tks!!

I think you are looking for string aggregation.
The following are the replies posted by me in the forum recently on the same case.
they might help you.
Re: Concatenating multiple rows in a table - Very urgent - pls help
Re: Doubt in a query ( Urgent )
Re: How to remove words which consist of max 2 letters?
Re: output like Name1,Name2,Name3...

Multiple values for one UDF

Is there a way to select multiple options from a drop down for a single UDF? For example, define 10 valid values for a UDF and allow the user to select all 10?

Hi Katie,
you can create a user-defined table and fill it over "tools/user-defined windows". You can choose these table in "tools/user-defined fields" for your topic. In form you can dropdown the filled values or defining a new value. I'll hope it will help.
Excuse me, it's not the right answer to your question.
regards Stephan
Edited by: Stephan Poller on Nov 27, 2008 11:40 AM

How to get Multiple Values for a key from a session object?

Hi,
It might seem dumb but I am facing a problem here with the session object. I'll paste the session object's content from the netbeans "Local Variables" window for clarity -
Name Type Value
hsession StandardSessionFacade #66
session LWSFSession #69
inherited
attributes Hashtable #80
[0] Hashtable$Entry "cart"=>#115
key String "cart"
value DummyCart #115
item null
submit null
v Vector
[0] String Full Metal Jacket
[1] String As Good As It Gets
[2] String Tim
What I want is to get the values "Full Metal Jacket", "As Good As It Gets" and "Tim" from the session obejct?
The problem I am facing is that if I do a session.getAttribute("cart"), I'll get a single value in return. What will that value be? Will it be "item", "submit" or "v"? And if I want all the values in v above, how can I get them?
Thanks.

None of the above.
HttpSession.getAttribute() will return what you put into it using HttpSession.setAttribute(). In your case, it'll return an Object which you need to cast to DummyCart. Then you can access the data in DummyCart using the API of the DummyCart class.
hth

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

How to get one value from multiple duplication for a key figure field

Hi expert,
      I have a infoprovider, with following format:
        employee     hourly_rate   action_type count of action
     there are multiple rows for each employee, I want to create query as follows:
        employee     hourly_rate   action_type count of action
     in which hourly_rate is constant , only retriving one value from multiple rows for one employee, count of action should be summarized.
how to get this hourly_rate.
Many Thanks,

Hi,
put the employee in rows panel -> reaming object put it in free char panel.
suppress the all result rows for the all object except employee .
select the object -> go to query properties -> select display tab -> select result rows -> select suppress.
select the employee -> go to query properties -> select display tab -> select result rows -> select always display. - now it will give employee wise hourly rate summarize data.
Thanks,
Phani.

BEx report -two different calculations for a result for one key figure how?

All,
Maybe someone could help me with the following, we have a requirement to setup for one key figure two calculations for result rows. One result (average) for one level, and on a higher level -grand total have a (sum), as for our business it makes sense to do it this way. We have setup average for this KF, we get correct results (see below values 7,5 & 6,5) however for the grand total (across multiple products) so for one level up we need to have a different calculation. How could we achieve this?
Here is an example:
location     product          inventory
AAAA     11111          5
AAAA     11111          5
AAAA     11111          10
AAAA     11111          10
AAAA     Result          7,5      ---> average
AAAA     22222          5
AAAA     22222          6
AAAA     22222          7
AAAA     22222          8
AAAA     Result          6,5       -
> average
AAAA     Result (across products)          14      ---> here I want to have a sum of averages

This could be achieve only IF you upload a hierarchy for product inventory with different levels, wherein each level show subtotals and finally grand total will be shown at the end of the results.

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, <b>but its not a range which has two fields</b> . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

Not Working-LexicalParamater used to send multiple values with one prameter

Hi,
I am calling a reportname.rdf from the web(using apache webserver and url as follows:
http://localhost/cgi-bin/rwcgi60.exe?server=reportservername&report=acctActivity.rdf&userid=bizsystest/[email protected]&destype=cache&desformat=pdf&placeholdercolumnname='2,3,4'&docid=2
I have to send multiple values for fundid.
To accomplish this,
I created a placeholder column and initialized the value '0' and type taken as character(even though datatype of this column is number).
In sql query
select table1.c1, table2.c2 from table1, table2, table3, table4 where table1.cl in (&placeholdercolumname)
and table1.c2 = table2.c2(+)
and table3.doccode = :docid
From Web, URL contains the placeholdercolumnnmae='2,3,4'
Still its taking the value zero and output is generating.
Its not taking my newvalues ('2,3,4') in IN parameter.
I donot know the reason, where exactly is wrong.
Please help me to resolve.
2. My Second Issue:
Is there anyway, can we hide all key/value parameters send through the URL not visible to endusers
like servername, database userid and password and configure some where, so system can pickup each time when I run report.
Please help me to resolve.
Thanks,
Usha.

Hi Usha,
First of all, I assume that the place holder column you have specified is a UserParameter which you have specified on the command line. I don't think there is any direct way of doing that.
I created a placeholder column and initialized the value '0' and type taken as character(even though datatype of this column is number). If I infer correctly from what you are saying, you can't mix and match the datatypes of the columns, you can't define the parameter as a number and pass characters. I suggest you declare your parameter as a character with sufficient width to hold your LOV and then process them convert them to numbers.
Another suggestion is try replacing your "Placeholder" with another query construct.
For your Second issue,
You can use the Key-Map file Oracle Reports provides for the Web client. Please refer to
<ORACLE_HOME>\Report60\server\cgicmd.dat.
In the cgicmd.dat,you can alias your entire commandline with a single key and use that key in your URL.
Regards
Oracle Reports Team.

Multiple choose for one parameter

Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
Select ....
where ....
content.style IN (:p_style)
(content.style is a column in table "content", and "p_style" is a bind variable)
i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
Li<HR></BLOCKQUOTE>
you can do that by flowing the stap
at first you will write a select statement
select ...
From ...
where Style (colomn name) = &style1
then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
then you write in after parameter form trigger...
IF :P_style = 'All' then
:style1 := null;
Else :style1 := 'and style (style means your column name) = :P_style;
end if;
null

Multiple Vendors for one Document Number in BW

Hello All,
We are getting Multiple Vendors for one document in BW. In R/3, standard table and RSA3, we are able to see correct vendor where as when it is coming into BW it is showing incorrect vendor in PSA and Data Target.
All issues are coming for Process Key 1 only.
*For Example:*
Document: 9400000007
Schedule Line:1
Doc Item: 1
Vendor:
0010019229 - Incorrect Vendor
0010018962 - Correct Vendor
Committed Quantity: 0
Doc Type:
ZNB
ZNPP
Process Key: 1
Not sure how to upload screen shot.
Please suggest.
Thanks,
Vijay

Hi ,
Are you loading for the first time ? If yes have you checked Transaction BF11 settings.
Regards
Rahul Bindroo

Multiple values for Time Characteristics (Ex: 0CALMONTH) in planning layout

Hello,
We are on BW - BPS 3.5v
We have a realtime infocube with only time characteristic 0CALMONTH.
There is a requirement that in my Planning layout I have to display the Keyfigures for:
(CURRENT MONTH) (CUMULATIVE 4 MONTHS FROM CURRENT MONTH) (CUMULATIVE 7 MONTHS FROM CUR MONTH)
I defined 3 exit variables on 0CALMONTH , one for Current Month, one for All 4 months from Current Month and another for All 7 months from Current Month.
In my planning layout when I use these variables for 0CALMONTH, I don't get the values for 4 months & 7 months.
I checked the variables are being populated with correct values. But when they get passed to the layout it doesn't read the Cube.
I got the basic doubt if we can give multiple values for the time characteristics in planning layout..??
Thanks for any suggestions.
Vish

Hi.
Did you created 3 restricted KF: one with KF amount and variable current month, second with amount and variable 4 monthes, third with amount and variable 7 monthes ?
Did you have match records in you cube ?
Regards.

Multiple values for one key in hashtable k, v

Similar Messages

Maybe you are looking for