Multiplication Factor in MM Pricing

Hi all,
My client requires pricing as below
Basic price=1000
Multiplication factor =1.1
Surcharge=10
Other charges=15
Insurance Charges=20
Vat =2%
I have requirement for Vat calculation as per below:
Vat= {(10001.1)1015+20}2%
Please suggest how to use multiplication factor 1.1 to calculate vat % as mentioned above.
Thanks & Regards
Sunil Singh

You can use the surcharge condition type with % as parameter to meet this requirement. In the pricing procedure you configure this surcharge to be applied only on the base price. So by entering 10% as surchage, this multiplication factor of 1.1 will automatically applied.

Similar Messages

Price determination using a premium (multiplication factor)

Hi
I have a business scenario where services are being maintained as a material type - DIEN with a standard price. Now what is required is to maintain a multiplication factor which will always be multiplied with the standard cost and the resultant value will be the value at which GR will be done for a service. Do we have the provision to do it through standard SAP config. we are not doing service entry but are doing regular GR since service is being maintained as a material of type DIEN. Please suggest.
Thanks!!

You have to use Tcode: CKMSTART
Controlling - PCControlling - Actual Costing/Material Ledger - Environment - Production Startup - Set Valuation Area as PRoductive.
Thanks

Multiplication factor in measurment point/counter

Hey Gurus,
Is it possible to include multiplication factor in measuring points / counter? Like when my clients are entering the readings of energy meter they have to multiply it with some factor to get the actual reading. Is it possible in std sap or do i ve to go for development?
Thanks,
Abhishek

Hi Abhishek,
Some time back I have done the same requirement for one of my clients.
For that we have created a Z- Table and maintained the multiplication factor for that particular measuring point.When we enter the reading in measuring documnet system will check the multiplication factor in the Z- table and populate the reading.
We have used IMRC0001 user exit for this.Please ask your ABAP team to develop this, it is not much complicated.

Multiple calls of same pricing routine while saving sale order

Hi,
I have a requirement where I have to modify a pricing routine 9XX for sale order. In pricing procedure, I observed that this routine 9XX is assigned to multiple pricing conditions (ZNN, ZMM, ZDD etc). I saw that this routine is getting called many times in debugging for each of these assigned pricing conditions. May I know on what basis this pricing routine gets triggered multiple times for the corresponding pricing condition?
Thanks in advance.
Regards,
Sri

Sri,
For everychange at ITEM level,Pricing mechanism will be repeated.
You can check in debugging as below
1.FM Pricing.
2.Subroutine perform xkomv_aufbauen_aus_komt1.
3.Check for the below code
* L O O P Pricing Procedure
loop at komt1 from komk-ix_komt1_v to komk-ix_komt1_b.
4.Within this loop you will find a subroutine
perform (bedingung_pruefen) in program saplv61a if found.
Put a break point on this LOOP and check what is happening at the desired condition type while it is running through all the condition types of that Pricing Procedure.
K.Kiran.

Multiple factor - Depreciatioin

hi,
I am facing one problem regrding multiple shift factor depreciation. i updated the shift factor in asset master. systems is calculating the exact amount as per the shift factor and depreciation key upto the 11 period but in 12th period systems is reversing the shift depreciation value. the total of depreciation value is only as per the depreciation key only. it is not calculating the combination of shift factor and depreciation key in the period of 12th. what will be the possible solution?
asset value is Rs.100000.00
depreciation rate is 4.75%
Shift factor for april is 1.71
Now for example april deprciation value is Rs. 667.00(Cr) for 30
for May Rs.674.00 Cr
june Rs.667.00 Cr
july Rs.674.00 Cr
Aug Rs 674.00 Cr
sept Rs.667.00 Cr
oct Rs.674.00 Cr
nov Rs.667.00 Cr
dec Rs.674.00 Cr
jan Rs674.00 Cr
feb Rs.656.00 Cr
march Rs.2817.00
total Rs. 4750.00 Dr and also accumalated depreciation Rs.4750.00
Can any one help me in this regard.
govind.
govind.

finded solution by own

Multiple CRM clients (MCRM) pricing and lean order management

Hi CRM experts,
We have a scenario where two CRM CLIENTS (not different systems/boxes) (lets say 100 and 110) are connected to two different SAP ECC systems (NOT different clients but different ECC systems). Both CRM clients have interaction center sales with Lean order management. Now ECC systems have to me merged and the it is required to have one ECC client is connected to 2 different CRM clients.
As per the note 1143540 provided by SAP on this subject it seems that multiple CRM systems can be connected to one ECC. The note tells that conditions exchange in not supported.
1) I want to know if conditions can be exchanged atleast with one system.
2) We know that multiple CRM systems/boxes are supported but are MULTIPLE CLIENTS supported
3) Will Lean order be supported with multiple clients of CRM with one ECC backend
Your help on any of the above questions is highly appreciated and points will be given liberally.
Thanks
Satish

Hi Satish ,
Though I have no document which says this would happen or don't , yet I believe this is possible.
I would visualize the scenario likes this
OLD Scenario
CRM_CLNT1--RFC_1ECC1 CRM_CLNT2--RFC_2-ECC2 ( CRM_CLNT* connected through RFC_* to ECC*)
New Scenario
CRM_CLNT1 -
RFC_1------ ECC1----RFC_2--
CRM_CLNT2
In my opinion at the CRM side this should be possible. It would not lead any change at the CRM side because CRM_1 system and CRM_2 system would still connect to ECC1 through separate RFC connections. But at the ERP side you would have to replicate the data for ECC2 in ECC1.
The Lean order or LORD connects the SAP ERP & SAP CRM systems through a RFC connection using LORD framework on the CRM side. The ERP fields and CRM fields are mapped using mapping table and data is exchanged through communication structure. I don't see any reason why this would be affected.
Let me know your thoughts on this.
I would be interested to know if I you find any relevant documents on this which proves my hypothesis wrong.
Regards
Kavindra
P.S: award points if you find it useful.
Edited by: joshi_kavindra on Nov 15, 2011 8:29 AM

Data Modeling - Creating a multipling factor for a year

We have a need on a report to adjust the result by a percent based on the year. i.e. if the value is 100 and it is in year 2007 we might add 1% making the end result 101. But if the value is 100 and it is in year 2006 we might want to subtract 2% making the end result 98.
My first thought was to create this percent as an attribute on 0CALYEAR, but it is not possible to place attributes on time charateristics. Does anyone have any suggestions for me to consider on how we might model this?
Thanks,
Chris

Hello Chris very simple suggestion for you copy from 'value' field 2 new value fields in query one for 2006 and filter this with calyear 2006 and multiply with .98 and one for 2007 and filter with calyear 2007 and multiply with 1.01. Show them in columns.
Don't worry about records for 2006 the 'value 2007' will be 0 and records for 2007 'value 2007' will be 0
Simple one
Sarhan.

Multiple Variant pricing conditions in a Pricing Procedure

Hi,
I have a scenario regarding variant configuration pricing in a sale order. I need to attach multiple pricing condition like VA00 in my pricing procedure .
A material M1 has many characteristics under the category Basic and Special for example.
Under Basic I have the following characteritics and its respective values maintained in VK11
B001- Basic Spec 1 USD 100
B002- Basic Spec 2 USD 200
B003- Basic Spec 3 USD 300
Likewise under special category ,
S001- Special Spec 1- USD 500
S002- Special Spec 2- USD 1000
In the pricing procedure the varaint condition VA00 will carry the price of the characteristics. My requirement is as follows
1. The prices of the Basic spec should be added first and later the special spec
VA00- Basic Spec 1      100
VA00- Basic Spec 2      200
VA00- Basic Spec 3      300
Sub total Basic spec Value 600
VA00 Special Spec 1    500
total basic and special spec - 1100
The problem I faced in the above format was that the pricing procedure will allow only one entry of VA00. To over come that I copied the condition VA00 and named a new one, for e.g, ZVSP.
Now when I use the condition ZVSP, it does not fetch the values like VA00.
Could any one suggest a method in which I can introduce varaint conditions in multiple levels in a pricing procedure.
Thanks and regards
Rasheed

Hi,
When you copied the VA00 condition type, did you also copy the associated access sequences? Your new condition type should have an access sequence with an access that transfers the value of the doc. field KOMP-VARCOND into the condition VARCOND; use transaction V/07 to check this.
Regards, Jesper

Pricing condition record text maintenance in multiple language

Hi friends,
While maintaining condition record by VK31 transaction, there are options for multiple language selection. but after saving it appears only in English. Please let me know whether we can maintain text in multiple languages for a pricing condition record?
Regards
Manish
9741178072

HI Manish,
You need to maintain the translations for the condition types in SPRO.
The path is SPRO - Sales and Distribution - Basic Functions - Pricing - Pricing condition types - Maintain Condition types.
Then selecting the particular condition type GOTO- Translations, you need to maintain the translation in the particular language as desired.
Thanks
Ani

Pricing schema for steel industries

Hi Friends,
Kindly help me on following issue..
I am working on a pricing schema (additional information : steel industries and material is being used with varient configuration)
take a example --there are three vendors suppling different grades of steel , having different material composition..( contains of AL, SL, PH, Mo etc in %)
suppose supplies will be as -- 0<x<1.2% x .85(multiplication factor)
0 .12<x<2%x.90
0.23<x<10%x.98
If the supplies meets any of the above combination then system should pick pricing schema for that material ..
I could not able to understand how to link these formulas with a pricing schema and how to trigger if supplies falls under these categories.
Your earliest response on above is highly appricable
thanks

Hi ,
Thanks for your reply , in the same mail i wish to thank all who has spare their time for ansering to my quires.
Is it possible in the following way...
Suppose i ask the quoations from the different vedors ( say Q1 , Q2 and Q3 theree different quoation for a same grade of a material or we can say for which falls in a specified material composition range)
I will create one ABAP program where in , while creating a PO, system will pick the price from the quotation ( the final quotation - the best one) along with a source of supply , material and the validity period .
Sytem will do the pricising based on the price picked from the quotation .
Is it possible .......?
kindly suggest me if it is possible .. then which thing or table etc need to consider while defining the schema.
thanks

UK pricing of Adobe Software a rip off compared to US... Why?

I'm an existing Adobe customer and own Lightroom 2 which I upgraded to Version 3 and Photoshop CS4 Extended which I want to update to CS5 Extended.
I was on Adobe.com (via the help button in Photoshop) and noticed on the right of the page upgrade to CS5 Extended from $199. So, I went through and selected from CS4 Extended to CS5 Extended and with the current offers go a final price + shipping of $285.15 which is £183.02.
I tried but, I couldn't complete the order, so I logged onto Adobe.com/uk and created the same order but the price is almost Double the US price (was £183.02) at £333.60. Why is the same product almost double the price in the UK vs US?
I totally understand that there maybe a slight currency translation adjustment and additional shipping cost (although the product is very light anyway).
I spoke to someone ad Adobe via the live chat and was told (text taken from the actual chat).
Although Adobe Europe and Adobe US are different parts of the same global company, European Marketing strategies and pricing are not directly related to those used for the US.
I truly understand your concern regarding the price being more in UK as compared to US conversion, however, there are many factors that decide pricing like 'the cost of doing business in each country' and the 'difference in the perceived value of the product'.
We want to make sure that we are giving our Customers the best products and at the right price.
We're sure that the Adobe products add value by helping you get the desired output at ease, efficiency and speed.
Come on, the US and UK product is 100% identical and why would charging almost double the price be 'the right price' for the consumer?
I'm very unhappy about this, and believe it's yet another classic case of overcharging the UK customer.

Marian Driscoll wrote:
these types of discussions only demonstrate the desire for Adobe software. It only strengthens Adobe to realize that people passionately want Adobe software.
You may be right, but I don't think so
A much stronger message can be sent by ignoring Adobe. If we do not like the price. Do not pay it. The "classic case" is that a vendor will drop prices when it finds that nobody wants to pay so much.
This can (and might) happen simultaneously along with all the griping. Many people may just decide to keep using their old versions, especially since they can't upgrade from versions older than CS5. At least the griping will tell Adobe WHY they aren't buying.
To add to the reasons explained in post #3...
3. There may be a greater cost to market in different countries
4. There may be a greater cost legally defend software licenses/patents in different countries
As pointed out by many other people, not all software companies make such a large difference in what they charge their customers, though the challenges are the same. I personally tend to believe the explanations given by the customer support representative regarding perceived value of the product (translation: charge the most that people are willing to pay) and the separate marketing strategies for the US and international.

How to view Conversion factor in info records conditions

The Buyer define a conversion factor for a box. 1 box = 500 pce.
When I was trying to see the conversion factor of the pricing in the info records conditions (Menu in conditions Extras->Conversion Factors, it shows inactive...
I ask to the basis team to check my rol for authorizations and that not depend of autorizations.
They also use an ID with SAP_ALL authorizations and they get the same inactive (grayed out) item in the menu when I tried to look at a pricing condition.
Do you know in Configuration where I can modify it in order to can display the conversion factors?

Hi
In the Purchase info record General data screen, at the bottom of the page ,there is Purcahse order unit of measure under that heading you have the Conversion factors.
If you specify the order unit you will be able to maintain the conversions there
Thanks & Regards
Kishore

Vendor rating - Demerit factor

Hi Friends,
In vendor rating, 3 evaluation criterian are followed namely, quality(Q), delivery (D) & service (S).
Now the vendor rating becomes, VRx = (QDS) .
In this above rating, our client wants to multiply by using demerit factor.
a. Demerit-factor-1 (Rejections in shop) on Quality , Delivery and Service.
b. Demerit-factor-2 (Rejections in site) on Quality , Delivery and Service
Then vendor rating becomes,
VRx = (QDS) * Demerit factor.
How can I address this.
Munna.

Hi,
Demerit factor is nothing but multiplication factor which vendor decides based on the rejection of goods supplied by the vendor ( after acceptance by quality, it is rejected at shop floor).
If there is no rejection then Demerit facto is 1. So vendor gets full rating. If the demerit factor is 0.9, he will get 90% of the vendor rating.
I hope it clarifies the requirement. Kindly let me know if you still you could not able to get it.
Munna

Multiple conditions in Query doesn't work

Hi all,
I've made a query pointing on a Multiprovider wich 's made of two main dimension ( multiple infoproviders ) :
contract and pricing and on the other hand Sales and Revenues.
In my Query, one condition's concerned by a contract & pricing key figures ( Number of pricing condition > 0 ), and another one is about a Minimum Turnover Sales & Revenues key Figures restriction( by a prompt ).
This doesn't match, Some rows are missing, and while a condition is active , the other one can't be..
If any one meet this kind of problem before ?
Thanks and sorry for my bad english..

Hi,
I already try to create another key figure wich made like this :
Number of condition * Turnover
and made a condition on this result.
But the main problem is if the contract doesn't have Turnover, it will not shown the rows with condition ..( the condition is on the single value 'number of document ) and if I put anotehr condition with number of condition > 0, it still doesn't work..
thanks for help.

Minimum and Multiple Order Qty attributes by product

What are the options for managing Sales Order Multiples. Would like to have the option of setting required or optional quantities. For example, Product A is shipped on a pallet with 12 units. Would like orders to be managed as 12, 24, 36 etc. In other words, the 12 would also become an order minimum. In some cases this should be mandatory. Is this an item master field? If not, how is it normally managed? As an added bonus, the ability to flag these multiples as mandatory for only certain customers or sales channels would be better still. Any ideas?
Thanks,
Chris

Hi,
This is the definition of your questions:
Order Multiple u2013 you can set a multiplication factor for ordering the item e.g. in
case you define 5 in this field and14 items are required, the MRP will recommend to
order 15 items (3X5=15). If 18 items are required, the recommendation will be to
order 20 items (4X5).
Minimum Order Qty u2013 you can type a minimum quantity for ordering items by the MRP.
The planning data is apply when there is a requirement (sales order, forecast, production orders (for the child item) and reserve invoice.
JimM

Multiplication Factor in MM Pricing

Similar Messages

Maybe you are looking for