Multipoint 21012 "Take control" from Dshboard failed

GoodDay
I have installed WindowsMultipoint2012Premium
and I use Direct-Video-Coneted
station.
When I want to use Dashboard, it works
fine, but when I want to"Take
Control"- it appears the following error message;
"The Take Control Failed
action.Multipoint can not connect to
the session "
Same if I use the"Project":
error messageis:
"Project failed.Unable to connect to
session"
I do not use virtual machine.
I do not use WMP 2012 virtual.
It is installed as the operating system on
an Intel i7 with 16 GB
RAM. Connection using NVIDIA
Quadro 440 (and/or Nvidia Quadro nvs 295)+ USB HUB
+ monitor and the second Config. (connection)
is a Zero Client HP T 200.
I reinstalled WMP 2012 several times.
Tacke control sometimes worked
and sometimes not. I do not know why.
Pleasehelp me,
What should I do?
Thanks
[email protected]

Good day
  Thanks for the reply. I checked
those mentioned by you.
As I said, I use Monitor
connection (Nvidia NVS 440 qadro)
+ HUB ..and  another station
with the HP t200 Zero Client
No results for Take Control
I want to sent a copy from screen to
be more specific.
please inform me an E-mail
address where I can send
Thank you and I wait for your advice

Similar Messages

  • Take input from table control using wizard

    Dear experts,
    I am trying to take data from table control into internal table using wizard.
    In main report program i defined the internal table and used wizard after  that.
    I could see internal table there and i picked the fields i wanted.
    Also i defined a workarea of same time.Further i made a push button.
    In PAI user command module i specified
    loop at itab. (one used for table control data)
    endloop.
    Here i put break point and find that no data is coming from grid.
    With wizard what additional i have to do ?

    Hi
    PROCESS AFTER INPUT.
    MODULE USER_COMMAND_2209.  "do processing
    loop at itab.
       module UPDATE.                           "read from tbl ctl into db table using wa.
    endloop.
    DATA:   itab TYPE TABLE OF YSTUDENT WITH HEADER LINE,
                WA LIKE LINE OF ITAB.
    MODULE UPDATE INPUT.
    WA-ID = YSTUDENT-ID.
    WA-NAME = YSTUDENT-NAME.
    INSERT YSTUDENT FROM WA.  
    ENDMODULE.
    Instead of Insert into table, you can write: APPEND WA TO ITAB.    
    Also YSTUDENT-ID is the name of the column in your tbl ctrl.
    Make sure your PBO also loops thro the itab:
    loop at itab with control tab1.
    endloop.
    Hope this helps
    Regards,
    Jayanthi.K

  • Failing to take control of navigation

    Hi,
    Im trying to take control of the navigation. Im using MyFaces.
    let me explain:
    I wish to have my own piece of code to parse the request URI and control the navigation to the next JSF page.
    This functionality is desired for accomplishing a permalinks scheme of some sort.
    For example
    The link root/yuval/yuvals_stuff should cause the following to happen:
    - I parse the request with a servlet filter and know that we need to load some data for yuval.
    - I use a ViewHandler to load the data (it delegates the call to some service that gets the data from the database)
    - I now forward the user to a known jsf page that is bounded with the viehandler and presents yuval's stuff .
    Actually, the first time i try to use the code, the navigation goes well. But right after refresh or calling the same url again I get an exception. The code and the exception are provided here:
    Here is what i do inside a servlet filter (I also tried to put this code inside the faces servlet, just for testing):
    <code>
    FacesContext fc = FacesUtils.getFacesContext(req, res);
    String action = "#{viewPollViewHandler.go2}";
    javax.faces.application.Application application = fc.getApplication();
    MethodBinding mb = application.createMethodBinding("#{viewPollViewHandler.go2}",null);
    String outcome = (String)mb.invoke(fc, null);
    String fromAction = mb.getExpressionString();
    NavigationHandler navigationHandler = application.getNavigationHandler();
    navigationHandler.handleNavigation(fc, fromAction, outcome);
    String viewId = fc.getViewRoot().getViewId();
    UIViewRoot view = fc.getApplication().getViewHandler().createView(fc, viewId);
    view.setViewId(viewId);
    fc.setViewRoot(view);
    fc.getExternalContext().dispatch(viewId);
    fc.responseComplete();
    </code>
    Explanation:
    First we try to get the FacesContext, using the current request and response objects. Now we know what action we want to invoke on what ViewHandler, so we go ahead and make a method binding for this method through the JSF Application context. Now we invoke the method and get the outcome String from it. Till now everything seems to work ok � we get the ViewHandler's method invoked correctly and we get the proper outcome String from it.
    This means the ViewHandler is now populated with our needed data, so all we have left to do is go to the presentation page that uses this ViewHandler.
    We use JSF's NavigationHandler to navigate as usual, giving it a "fromAction" and an outcome. Now we want the name of the page for this navigation, so we get the view id from the FacesContext. The view id is correct and points to the next page as states in the faces-navigation.xml, so we set it as the new view root and try to "dispatch()" (which is the same as "forward()") to it.
    The result seems sufficient, as we get to the next page and all the data is presented correctly (sometimes, in IE only we experienced some javascript errors that were unknown). The big problem occurs when trying to hit "REFRESH" or clicking back and then trying the original href link again. We suddenly get a NullPointerException that occurred in the "getValue()" method of JSF's getValueBinding()".
    Can anyone contribute?
    Thank in advance!
    Yuval.

    Hey all,
    The following link shows how to solve the problem:
    http://wiki.apache.org/myfaces/InvokingJsfPagesWithStandardUrls#head-6c1aaf488d48f938896da962aaa4361ec3ffaf70

  • Upgrading robosource control from 3.0 to 3.1

    Hi,
    Our doc. group will be upgrading robosource control from 3.0
    to 3.1. I can't find much documentation on this. I know that there
    are both clent and server upgrades for 3.1. Other than running both
    the client and server upgrades, is there anything else that we
    should be aware of or may need to do to complete the upgrade (and
    successfully connnect to our exisitng database)??
    We've already sucessfully upgraded from RH 6 to RH 7.
    Any info. you can provide is appreciated.
    thanks,
    Brad

    There must be loads of people who still use Precision 670s and I fail to understand why Microsoft would block using 8.1 for this model (or its processor).
    Perhaps not.  I had my last Precision 470 (same Dell design era) die late last year (it was running Vista x64 nicely at the time).  I tried to resurrect it but when I opened it up I found the plastic parts just were falling apart.  I finally
    determined the problem to be on the motherboard somewhere and, given the power of modern systems, I just kicked it to the curb and integrated all the duties it was performing into the other systems we have.  The processors in the Precision 470/670
    line are getting near 10 years old.  That's an eternity in modern computing terms.
    As far as failing to understand...  At some point every software author must make a decision whether to continue to build their systems to run on old hardware, or use instructions that only newer hardware supports in order to take advantage of
    the additional power and capability it provides.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation fail

    Hi,
    During the clone of R12.1 instance, while running the post clone on the DB tier, i am getting the following error
    RC-50004: Fatal: Error occurred in ApplyDatabase:Control file creation failed.
    when i looked into the log file, i can find this
    Creating the control file for hr12at1_jsrc-cn6 database ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Tue Nov 17 04:41:58 2009
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1071333376 bytes
    Fixed Size 1318172 bytes
    Variable Size 427819748 bytes
    Database Buffers 629145600 bytes
    Redo Buffers 13049856 bytes
    Control file created.
    alter database open resetlogs
    ERROR at line 1:
    ORA-01152: file 2 was not restored from a sufficiently old backup
    ORA-01110: data file 2:
    '/u01/app/oracle11/db/apps_st/u32/oradata/R12HRM/tx_data11.dbf'
    Please help
    thanks a lot
    Sasikala

    Hi,
    Sorry, my mistake, I did not pay attention to the cloning part.
    For this error, looks like the database was not cleanly shutdown before copying the files or that preclone was not run successfully. You will have to run preclone again, and shutdown the database normally, then copy the file again.
    Regards,
    Hussein

  • Not able to generate Service control from WSDL in Weblogic Workshop9.2

    Hi All,
    I am not able to create Service control from my WSDL in Weblogic workshop9.2. It was working fine in Weblogic 8.1.
    I am getting the following error. Please help me out.
    Types analysis failed for both JAX-RPC and XmlBeans.
    BEGIN JAX-RPC CAUSE
    com.bea.control.servicecontrol.internal.validation.BindingsCheckException: Failed to generate the JSService with the endpoint builder
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.setupJsService(BindingsClassNameReference.java:573)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.loadJsService(BindingsClassNameReference.java:321)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.getJsService(BindingsClassNameReference.java:362)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.loadTypeNamesForService(BindingsClassNameReference.java:398)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.getTypeNamesForService(BindingsClassNameReference.java:383)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.getComplexTypeNamesForService(BindingsCheckUtility.java:210)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.getComplexTypeBindingTypeInfoForService(BindingsCheckUtility.java:131)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.getComplexTypeBindingInfoForServiceByBindingsDataSourceType(BindingsCheckUtility.java:104)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.initializeTypesForTheService(BindingsCheckUtility.java:273)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.findMatchingBindingsDataSources(BindingsCheckUtility.java:434)
    at com.bea.wlw.controls.service.ui.util.BindingsChecker.<init>(BindingsChecker.java:55)
    at com.bea.wlw.controls.service.ui.wizards.SelectSCInfoPage.checkForCompatibleBindings(SelectSCInfoPage.java:304)
    at com.bea.wlw.controls.service.ui.wizards.SelectSCInfoPage.<init>(SelectSCInfoPage.java:98)
    at com.bea.wlw.controls.service.ui.GenerateSCWizard.getPageList(GenerateSCWizard.java:150)
    at com.bea.wlw.controls.service.ui.GenerateSCWizard.addPages(GenerateSCWizard.java:136)
    at org.eclipse.jface.wizard.WizardDialog.createContents(WizardDialog.java:499)
    at org.eclipse.jface.window.Window.create(Window.java:418)
    at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:996)
    at org.eclipse.jface.window.Window.open(Window.java:776)
    at com.bea.wlw.controls.service.ui.actions.NewSCGenAction.run(NewSCGenAction.java:101)
    at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:246)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:538)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:488)
    at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:400)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:843)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3125)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2758)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
    at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
    at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
    at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
    at org.eclipse.core.launcher.Main.run(Main.java:973)
    at org.eclipse.core.launcher.Main.main(Main.java:948)
    Caused by: java.lang.IllegalArgumentException: unable to find java type for t=String@http://www.w3.org/2001/XMLSchema
    at weblogic.wsee.bind.buildtime.internal.TylarBuildtimeBindings.getClassFromXmlType(TylarBuildtimeBindings.java:693)
    at weblogic.wsee.bind.buildtime.internal.TylarBuildtimeBindings.getClassFromSchemaType(TylarBuildtimeBindings.java:182)
    at weblogic.wsee.tools.source.EndpointBuilder.getJavaClassName(EndpointBuilder.java:735)
    at weblogic.wsee.tools.source.EndpointBuilder.addPart(EndpointBuilder.java:664)
    at weblogic.wsee.tools.source.EndpointBuilder.createParams(EndpointBuilder.java:591)
    at weblogic.wsee.tools.source.EndpointBuilder.addMethod(EndpointBuilder.java:521)
    at weblogic.wsee.tools.source.EndpointBuilder.buildEndpoint(EndpointBuilder.java:475)
    at weblogic.wsee.tools.source.EndpointBuilder.buildJsService(EndpointBuilder.java:252)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.setupJsService(BindingsClassNameReference.java:549)
    ... 43 more
    END JAX-RPC CAUSE
    BEGIN XMLBEANS CAUSE
    com.bea.control.servicecontrol.internal.validation.BindingsCheckException: Could not create buildtime bindings with ClientGenUtil
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.loadBuildtimeBindings(BindingsClassNameReference.java:242)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.getBindings(BindingsClassNameReference.java:161)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.loadJsService(BindingsClassNameReference.java:307)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.getJsService(BindingsClassNameReference.java:362)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.loadTypeNamesForService(BindingsClassNameReference.java:398)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.getTypeNamesForService(BindingsClassNameReference.java:383)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.getComplexTypeNamesForService(BindingsCheckUtility.java:210)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.getComplexTypeBindingTypeInfoForService(BindingsCheckUtility.java:131)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.getComplexTypeBindingInfoForServiceByBindingsDataSourceType(BindingsCheckUtility.java:104)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.initializeTypesForTheService(BindingsCheckUtility.java:253)
    at com.bea.control.servicecontrol.internal.validation.BindingsCheckUtility.findMatchingBindingsDataSources(BindingsCheckUtility.java:434)
    at com.bea.wlw.controls.service.ui.util.BindingsChecker.<init>(BindingsChecker.java:55)
    at com.bea.wlw.controls.service.ui.wizards.SelectSCInfoPage.checkForCompatibleBindings(SelectSCInfoPage.java:304)
    at com.bea.wlw.controls.service.ui.wizards.SelectSCInfoPage.<init>(SelectSCInfoPage.java:98)
    at com.bea.wlw.controls.service.ui.GenerateSCWizard.getPageList(GenerateSCWizard.java:150)
    at com.bea.wlw.controls.service.ui.GenerateSCWizard.addPages(GenerateSCWizard.java:136)
    at org.eclipse.jface.wizard.WizardDialog.createContents(WizardDialog.java:499)
    at org.eclipse.jface.window.Window.create(Window.java:418)
    at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:996)
    at org.eclipse.jface.window.Window.open(Window.java:776)
    at com.bea.wlw.controls.service.ui.actions.NewSCGenAction.run(NewSCGenAction.java:101)
    at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:246)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:538)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:488)
    at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:400)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:843)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3125)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2758)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
    at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
    at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
    at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
    at org.eclipse.core.launcher.Main.run(Main.java:973)
    at org.eclipse.core.launcher.Main.main(Main.java:948)
    Caused by: weblogic.wsee.tools.WsBuildException: com.bea.xml.XmlException: Exception while compiling org apache xmlbeans: C:\R4WorkSpace\TestEWS\src\controls\EWSDeal.wsdl:0: error: src-resolve: type 'Array@http://schemas.xmlsoap.org/soap/encoding/' not found.
    at weblogic.wsee.tools.clientgen.ClientGenUtil.createBuildtimeBindings(ClientGenUtil.java:217)
    at weblogic.wsee.tools.clientgen.ClientGenUtil.createBuildtimeBindings(ClientGenUtil.java:174)
    at com.bea.control.servicecontrol.internal.validation.BindingsClassNameReference.loadBuildtimeBindings(BindingsClassNameReference.java:228)
    ... 44 more
    Caused by: com.bea.xml.XmlException: Exception while compiling org apache xmlbeans: C:\R4WorkSpace\TestEWS\src\controls\EWSDeal.wsdl:0: error: src-resolve: type 'Array@http://schemas.xmlsoap.org/soap/encoding/' not found.
    at weblogic.wsee.bind.buildtime.internal.XmlBeansApacheBindingsBuilderImpl.createBuildtimeBindings(XmlBeansApacheBindingsBuilderImpl.java:262)
    at weblogic.wsee.bind.buildtime.internal.XmlBeansBaseBindingsBuilderImpl.createBuildtimeBindings(XmlBeansBaseBindingsBuilderImpl.java:119)
    at weblogic.wsee.tools.source.EndpointBuilder.setupBindingProviderWithServices(EndpointBuilder.java:836)
    at weblogic.wsee.tools.clientgen.ClientGenUtil.createBindingProvider(ClientGenUtil.java:458)
    at weblogic.wsee.tools.clientgen.ClientGenUtil.createBuildtimeBindings(ClientGenUtil.java:211)
    ... 46 more
    Caused by: org.apache.xmlbeans.XmlException: C:\R4WorkSpace\TestEWS\src\controls\EWSDeal.wsdl:0: error: src-resolve: type 'Array@http://schemas.xmlsoap.org/soap/encoding/' not found.
    at weblogic.wsee.bind.buildtime.internal.XmlBeansApacheBindingsBuilderImpl.compileXmlBeans(XmlBeansApacheBindingsBuilderImpl.java:361)
    at weblogic.wsee.bind.buildtime.internal.XmlBeansApacheBindingsBuilderImpl.createBuildtimeBindings(XmlBeansApacheBindingsBuilderImpl.java:257)
    ... 50 more
    END XMLBEANS CAUSE

    Hi
    I have not seen the wsdl yet but your xmlbean types generation looks familiar.
    This is one reason why you could get the error with the xmlbeans type.
    error: src-resolve: type 'Array@http://schemas.xmlsoap.org/soap/encoding/' not found.
    Workaround: To allow the XmlBeans to be built from this type of WSDL correctly, add the schemaLocation attribute. For example, if the original WSDL had an import such as:
    <s:import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
    It should be changed to the following:
    <s:import namespace="http://schemas.xmlsoap.org/soap/encoding/" schemaLocation="http://schemas.xmlsoap.org/soap/encoding/"/>
    After this change you should not see the error.
    Vimala-

  • HT201318 why is it so difficult to just update my Debit card details do you want to take money from an out of date card for I cloud storage?

    what is the use of sending an e-mail with a no reply address?
    Telling me you are going to take money from a Debit card that my bank has changed due to a faulty chip?
    I go to the control panel to sign in to my account and get told the information of my dream job and street where I grew up is not what you have.
    That is being very American Silly as far as I am concerned.     I have I phone 4s and I pad with wifi .
    I cloud storage wants to take money in a few days time but I can not update my card due to these two issues.
    your loss  if you make it so complicated  to just find the option just to up date a Debit card.
    I can do without I cloud storage.

    Wizluv Ibrahim wrote:
    or I dump de ipad
    Knock yourself out.

  • Error encountered in Rapid clone (control file creation failed)

    hi all,
    i have 2- node ERP server running EBS 11.5.10 with database 9.2.0.5 and OS HP UX 11.11
    while running perl adcfgclone.pl dbTier
    i encountered the following error
    Verifying correctness of adcrdbclone.sql
    RC-00115: Not able to read temp001.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp002.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp003.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp004.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp005.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp006.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp001.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp002.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp003.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp004.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp005.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00115: Not able to read temp006.dbf
    Raised by oracle.apps.ad.clone.ApplyDatabase
    RC-00116: Error while reading dbf files. Control file creation will fail.
    an later part of log file
    Creating the control file for DVP_test database ...
    SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:29:27 2009
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 598700552 bytes
    Fixed Size          737800 bytes
    Variable Size          419430400 bytes
    Database Buffers     167772160 bytes
    Redo Buffers          10760192 bytes
    Control file created.
    Database altered.
    alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp001.dbf' REUSE
    ERROR at line 1:
    ORA-00959: tablespace 'TEMP1' does not exist
    alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp002.dbf' REUSE
    ERROR at line 1:
    ORA-00959: tablespace 'TEMP1' does not exist
    alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp003.dbf' REUSE
    ERROR at line 1:
    ORA-00959: tablespace 'TEMP1' does not exist
    alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp004.dbf' REUSE
    ERROR at line 1:
    ORA-00959: tablespace 'TEMP1' does not exist
    alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp005.dbf' REUSE
    ERROR at line 1:
    ORA-00959: tablespace 'TEMP1' does not exist
    alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp006.dbf' REUSE
    ERROR at line 1:
    ORA-00959: tablespace 'TEMP1' does not exist
    but when i query v$tablespace it shows temporary tablespace is TEMP not temp1
    even on my production system the TEMPORARy Tablespace is TEMP
    when i see the alert file
    it says
    Tablespace 'TEMP' #2 found in data dictionary,
    but not in the controlfile. Adding to controlfile.
    File #143 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00143' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #144 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00144' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #145 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00145' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #146 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00146' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #147 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00147' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #148 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00148' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #149 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00149' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #150 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00150' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #151 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00151' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #152 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00152' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    File #153 found in data dictionary but not in controlfile.
    Creating OFFLINE file 'MISSING00153' in the controlfile.
    This file can no longer be recovered so it must be dropped.
    how can i come out though this confusion??

    i have opened the database but what about the next porcess now
    Beginning database tier Apply - Sun Jan 11 17:31:13 2009
    Log file located at /oradvp/ora/proddb/9.2.0/appsutil/log/DVP_test/ApplyDBTier_01110531.log
    RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    ERROR while running Apply...
    ERROR: Failed to execute adclone.pl
    Please check logfile.
    logfile says
    Checking for errors ...
    ORA-00959: tablespace 'TEMP1' does not exist
    ORA-00959: tablespace 'TEMP1' does not exist
    ORA-00959: tablespace 'TEMP1' does not exist
    ORA-00959: tablespace 'TEMP1' does not exist
    ORA-00959: tablespace 'TEMP1' does not exist
    ORA-00959: tablespace 'TEMP1' does not exist
    ORA-00376: file 148 cannot be read at this time
    ORA-01111: name for data file 148 is unknown - rename to correct file
    ORA-01110: data file 148: '/oradvp/ora/proddb/9.2.0/dbs/MISSING00148'
    ORA-00600: internal error code, arguments: [1236], [], [], [], [], [], [], []
    ORA-24313: user already authenticated
    ORA-01031: insufficient privileges
    ORA-01031: insufficient privileges
    ORA-24313: user already authenticated
    ORA-01031: insufficient privileges
    The database has not been successfully created. Shutting down the instance ...
    SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:30:01 2009
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Disconnected
    .end std out.
    .end err out.
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : test
    sDbDomain : khannapaper.com
    sDbPort : 1528
    sDbSid : DVP
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@test.khannapaper.com:1528:DVP
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    HP-UX Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP)))
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    HP-UX Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP.khannapaper.com)))
    Exception occurred: java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153093376)(ERR=12514)(ERROR_STACK=(ERROR=(CODE=12514)(EMFI=4))))
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    RC-00118: Error occurred during creation of database
    Raised by oracle.apps.ad.clone.ApplyDatabase
    StackTrace:
    java.lang.Exception: Control file creation failed
         at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:469)
         at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:314)
         at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:290)
         at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:131)
         at java.lang.reflect.Constructor.newInstance(Native Method)
         at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
         at java.lang.Thread.run(Unknown Source)
    and why does it shows temporary tablespace TEMP1
    but in real it is TEMP
    i dropped around 50 days back from production and added TEMP to it

  • Recover an iMovie from a failed external drive?

    Has anyone been able to get an entire iMovie recovered from a failed external Firewire drive? My LaCie just won't power up despite having its light come on, and having other external drives connected through it to my iMac and working fine.
    I was about to do some backing up after finishing some edits on my latest iMovie, located on that drive. The edits were taking a longer time than usual, with spinning beach ball going on and on, so I decided to restart the Mac and see if that would speed things up. A restart resulted in a totally white screen for over 20 minutes, so I powered off with the switch, and powered on again with it a few minutes later. After three tries, including trying to boot from the installation disk, the iMac sprang to life again, and three of my external drives came on as usual, but not the La Cie that has my iPhotoLibraries and the iMovies I am working on. It is not a problem with power cords or the Firewire cables, as I swapped them out with the other drives, and everything works except this drive will not power up. Its light comes on, and the Firewire ports allow the other drive to come on, as this one is the one connected to the iMac, but the drive remains cold and quiet, just sits there with its blue light blinking.
    I just need it to power on long enough to transfer my data to another drive.
    I will settle for drive-recovery if that means I will get all my movies and photos back......anyone ever had to use a drive recovery service for this? If so, how did it work?
    I do have backups for the photos, but not all of them as I don't usually backup every day. The movies will have to be recreated I can do this, it will just take lots of time......
    not happy with this situation....any support/sympathy greatly appreciated!

    Beverly Maneatis wrote:
    .. The drive comes on and its light blinks, but does not progress to the drive powering up and the light becoming a solid nonblinking. ..
    sorry to contradict you, Bev, but the drive itself has no lights.. :
    (pic by wikipedia)
    THIS is your drive with your precious data .. no blinks ...
    ok, I'm a typically 'Tim Taylor/Home Improvement'-guy (incl. friends in hospital...), so maybe a daredevil about screwing things up/open (pun-taaaa). if you open the housing (usually 4 screws on bottom), you would see a power-supply, some small board for the interface electronics, a fan, some small board for some other electronics. and two cables: one with 4 cables (=power), one flat cable with ~20something wires (=data).. the drive is fixed with another four screws.. it is really dead easy, and you can not damage the drive itself, except you wear some angora and plastic sandals, to get some zillion of volts of static electricity into your fingertips ...
    so, if you find a nice PC-guy, ask him to place the drive into another housing (usb or fw.. doesn't matter...).. for a pro, that is a 5min procedure.. I'm pretty sure, it will work! < fingers crossed > < throwing ash over shoulder > < murmering some Hun's incantaion >

  • Is it possible to create data control from wsdl when complextype is used

    Getting DCA-40015 error when trying to create a data control from WSDL file.
    The error clearly says complextype is not supported . just trying to see if there are any workarounds . because creating data control will save time in developing user interface by dragging and dropping the the data control in jsf page. jdeveloper webservice tester is able to create user interface for me based on wsdl when i run it , trying to develop the user interface using jsf pages
    oracle.adf.model.adapter.AdapterException: DCA-40015: Failed to create the structure for schema element "result". The complex type definition of the element is not supported.

    Hi,
    I could reproduce what I did:
    - created WebService from custom Pojo Model
    - Made sure all entities implemented serializable
    - In the WebServices Wizard, I created XML representations for my entities
    - tested with OC4J WebServices tester
    - Built ADF data control from WSDL file of deployed WebService
    - Created dependency t project containing the POJO entities
    - Selected result.xml of each method exposed in the WebService project
    - In the structure window, selected "item" (result-->item)
    - changed Bean class to my entity class name (absolute name)
    This showed my entity in the DC palette
    Frank

  • How can i take control of an ipad using my apple ID..??

    I have bought a used ipad mini 2 [wifi + retina], & while trying to sync the apps from my PC using my apple ID, the ipad keeps asking for the authorization of the PC even though the authorization was successful using my ID. then i authorized the PC with the previous users apple ID, and the syncing was successful..! however i want to use my apple ID to run the ipad, & take control of it. can anyone advise how can i get rid of the previous ID, & use my own one..?? Thanks!

    The Seller should have performed these Steps Before you took possion of the Device.
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    NOTE:  You may need to contact the Seller
    salm4n wrote:
    I have bought a used ipad mini 2
    i want to use my apple ID to run the ipad, & take control of it
    Restore the Device as New and Set it up using your Apple ID.
    See  Erase your device  Here  >  http://support.apple.com/kb/HT4137

  • RC-50004: Fatal: Error occurred in ApplyDatabase:  Control file creation failed

    There's anyone ever get error like this?
    [oradev@ebs bin]$ ./adcfgclone.pl dbTier
    perl: warning: Setting locale failed.
    perl: warning: Please check that your locale settings:
      LANGUAGE = (unset),
      LC_ALL = (unset),
      LC_CTYPE = "UTF-8",
      LANG = "en_US.UTF-8"
        are supported and installed on your system.
    perl: warning: Falling back to the standard locale ("C").
                         Copyright (c) 2011 Oracle Corporation
                            Redwood Shores, California, USA
                            Oracle E-Business Suite Rapid Clone
                                     Version 12.2
                          adcfgclone Version 120.63.12020000.7.1202010.2
    Enter the APPS password :
    Running:
    /u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /u01/DEV/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_21933.lst -stage /u01/DEV/11.2.0/appsutil/clone  2> /tmp/adcfgclone_21933.err; echo $? > /tmp/adcfgclone_21933.res
    Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
    Provide the values required for creation of the new Database Context file.
    Target System Hostname (virtual or normal) [ebs] :
    Target Instance is RAC (y/n) [n] :
    Target System Database SID : DEV
    Target System Base Directory : /u01/DEV
    Target System utl_file_dir Directory List : usr/tmp
    RC-00213: Warning: The path specified must be the absolute path
    Target System utl_file_dir Directory List : /usr/tmp
    Number of DATA_TOP's on the Target System [1] :
    Target System DATA_TOP Directory 1 [/apps/DEV/data] : /u01/DEV/data
    Target System RDBMS ORACLE_HOME Directory [/u01/DEV/11.2.0] :
    Do you want to preserve the Display [null] (y/n)  : n
    Target System Display [ebs:0.0] :
    Do you want the target system to have the same port values as the source system (y/n) [y] ? : n
    Target System Port Pool [0-99] : 0
    Checking the port pool 0
    RC-50221: Warning: Port Pool 0 is not free. Please check logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for conflicts.
    Target System Port Pool [0-99] : 0
    Checking the port pool 0
    done: Port Pool 0 is free
    Report file located at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
    Complete port information available at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
    Creating the new Database Context file from :
      /u01/DEV/11.2.0/appsutil/template/adxdbctx.tmp
    The new database context file has been created :
      /u01/DEV/11.2.0/appsutil/DEV_ebs.xml
    Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
    Check Clone Context logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for details.
    Running Rapid Clone with command:
    Running:
    perl /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/DEV/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/DEV/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/DEV/11.2.0/appsutil/DEV_ebs.xml showProgress contextValidated=true
    perl: warning: Setting locale failed.
    perl: warning: Please check that your locale settings:
      LANGUAGE = (unset),
      LC_ALL = (unset),
      LC_CTYPE = "UTF-8",
      LANG = (unset)
        are supported and installed on your system.
    perl: warning: Falling back to the standard locale ("C").
    Beginning database tier Apply - Sun Mar 29 11:35:27 2015
    /u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true  -Doracle.installer.oui_loc=/u01/DEV/11.2.0/oui -classpath /u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/share.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/srvm.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar   oracle.apps.ad.clone.ApplyDBTier -e /u01/DEV/11.2.0/appsutil/DEV_ebs.xml -stage /u01/DEV/11.2.0/appsutil/clone   -showProgress
    APPS Password : Log file located at /u01/DEV/11.2.0/appsutil/log/DEV_ebs/ApplyDBTier_03291135.log
      \     50% completed       RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    ERROR while running Apply...
    Sun Mar 29 11:46:03 2015
    ERROR: Failed to execute /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl
    Please check logfile.
    [oradev@ebs bin]$

    perl: warning: Setting locale failed.
    perl: warning: Please check that your locale settings:
      LANGUAGE = (unset),
      LC_ALL = (unset),
    LC_CTYPE = "UTF-8",
      LANG = (unset)
        are supported and installed on your system.
    perl: warning: Falling back to the standard locale ("C")
    Please check - $ env | grep LC
    If its set to LC_CTYPE = UTF-8 then unset or set it to blank value i.e. export LC_CTYPE = 
    Please see - ODA: oakcli command failed with perl: warning: Setting locale failed. (Doc ID 1526079.1)
    -Kj

  • 10.4.9 removes Brightness Control from System Preferences?!

    Has anyone else noticed that the Intel 10.4.9 update has removed Brightness Control from their System Prefs?!
    maybe it's just mine... seems unlikely!!!

    No, mine still has it. Perhaps it no longer thinks you can adjust the brightness. You may try the "standard" repair techniques to see if it will come back: Repair permissions, repair the disk (you must start up from installer DVD or use Safe Mode--which takes a while to boot because it is checking the disk), and then running the combo updater instead of Software Update.
    1.8 SP G5/iMac G4 FP/MBP 2.33/PB G3 Pismo   Mac OS X (10.4.9)   XLR8 G4 Upgrade for Pismo

  • Create application from spreadsheet failing - APEX 3.0

    Create Application from Spreadsheet failing (wrong column order) on the upload
    example csv columns are nameA, nameB, nameC
    Upload as csv
    The column order of the csv file changes....(its random).
    example csv is nameC, nameB, nameA -.but sometimes it works after numerous tries uploading it (column order is correct - same as csv file)
    I have another apex/db (10.1.0.4.2) installation(same version 3.0) where it works all the time(same csv file)
    The database for the failing Apex installation is (10.2.0.1.0)
    ANY IDEA???...could be a a database caching issue or a wrong db parameter?

    What table gets populated when you upload a csv file via create application from spreadsheet (is it only APEX_APPLICATION_FILES)? Because if i import the csv file in the repository it looks file when i download it. I not sure what controls the order of the csv file column order upon the upload create application from spreadsheet process. This is a very perplexing problem since it works on another apex 3.0/10.1 database environment.
    thanks

  • What would be the simplest way to view and take control over the internet?

    Hi All:
    Can some one tell me what would be the best and simplest way to connect from my laptop to another laptop through the internet?
    I have DYNdns running on the second laptop and have a host name assigned to that system for it to update the IP since the system uses different internet connections. The services that I would like to be able to have are the viewing and controlling of the system. I've read some where in this NG that if I have a copy of ARD admin. installed on that system also, it would be one way to do it... can some one verify this and please let me know if there are any specific settings I need to have on either one of the systems.
    I can connect to the second laptop while in my home network with no problem and perform all tasks. when trying to connect through the internet.. the system shows offline .
    Both systems are identical in hardware an software, Intel 2.16, 2G's RAM, OS X ver 10.5.2 all up to date and ARD 3.2
    Yes, I'm new to ARD and yes I'm searching the NG and the net. but I figure it doesn't hurt to ask since time is limited.
    All help greatly appreciated ..
    TIA
    Oscar A.

    To be able to connect to a workstation from outside it's network, the ports that ARD uses must be open on both ends of the connection. ARD uses ports 3283 and 5900 so those must be open.
    If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, you can only get reports, push package/files to etc. for a single workstation.
    ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install VNC servers on the systems (since the ARD client cannot listen on any port other than 5900 while VNC servers can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
    Remote Desktop 2: How to specify a port number for a VNC client
    to connect.
    The only other options are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
    Hope this helps.

Maybe you are looking for