MultiProvider Created from #.5 cube and 7.0 Cube

I have one global cube created with update rules and transfer rules and everything, the way we create in BW 3.5 (Delivery)
I have another newly created cube using BI 7.0 (History Delivery data) with Transformation and the DTP.
I have created one Multiprovider combining this 2 cube. The 1st cube contains all the data for Delivery with Material, Plant, 0MAT_PLANT and Delivery quantity and dates and other things as per the requirement. This is a cube to be used going forward.
The 2nd cube contains only Delivery data from legacy system loaded in to this History cube from Flat file. This cube only has 0Material, 0Plant, 0MAT_plant, Delivery Qunatity and the requested date.
Now the Multiprovider has common chars and KFs from these 2 cubes.
When I run the query on this MultoProvider to see results of past 12 months (Requested Date) excluding current month with quantity. I get only the results from the 1st cube. I have created test query on both the cubes individually and I get results on both those queries but when it comes to MP it just gives from the 1st cube which is created in BW 3,5.
Now My questions are
1) Does it make any difference for MP if one of the cube is in 3,5 and other in 7.0 ??
2) If No then what else could be the problem. I have checked the Data both of them look identicle and correct as far as I think unless I have made some basic error??
Please help. Will provide points.

Is it required that I have to select the particular InfoProviders under the DataPackage under Characteristics for the QUERY??
If you wish to see the data in the query that is stored in a particulat cube that form part of the multi, then you could.
Was I creating query the wrong way? I want to know the reason, It did work but I want to know the logic though.
No. it is wrong. But, if the query does not read data from more than one cube, but if you create it to run from multi cubes, then query response time may suffer.
Ravi Thothadri

Similar Messages

Handling Planned order created from Demand planning and Sales order in MTO

Hi all
In MTO\ Repetitive we genrate Dependent requirement from demand planning (PIR) after running MRP which finally planned order created but on the other hand in short term we have Sales order which generate planned order after running MRP(In MTO), How we should handle planned order generated from Demand planning and the ones generated from sales order.(both after MRP Running).
Regards
Babak Bolourchi

Dear,
You can combine the planning strategy also main as 56 and second as 65 and in demand managment MD61 you have the option select requirement type.
Then while creating sales order use MTO strategy and take MRP run through MD50 and then MD02.
and if you want to assign the stock to sales order then you and do it through MB1b with 412 E movement type.
As per my knowledge, generally 56 strategy only takes Sales Order Stock into consideration.
Consider setting the Individual/Collective indicator to 2.
Mark those characteristics that should have a usage probability in demand management as Relevant for planning.
Hope clear to you.
Regards,
R.Brahmankar

Create from Web Page and Out Of Memory

My machine is Windows XP Prof, 3+ GB of memory, 10's of GB of free hard drive space.
I create a PDFs from HTML pages located on my local drive. I am not making a PDF from HTML pages served by a Web Server. They are not located on some network device.
With Acrobat 7 Professional, I was able to create a PDF from HTML pages without any problem using the Create From Web Page menu option. It might have been slow, but it would predictably create a PDF. The final PDF might be as large as 72 or 130 MB.
I recently upgraded to Acrobat Pro Extended version 9. When I make some small PDFs (4-5 thousand pages) it seems to work okay. However, if I make the full PDF (about 10-15 thousand pages), Acrobat produces an out of memory error.
I have tried a number of things, but I still get the error. In the past I have had trouble like this with Acrobat 8 Prof on the Mac (but I don't remember an actual Out Of Memory message box).
Is there some setting can change, or some procedure that I can get my work done. It appears to me to be a bug in Acrobat 9, but if I could get a workaround for now, I would greatly appreciate it.
Thanks.

Even though I an using the Create from Web Page function, I am accessing files which my company has produced. They are located on my local system. I am not accessing them via a web server.
I can make a file with 1 level. I can make a file with a couple of thousand pages. Even 8400 pages. However, when I try to make a PDF of the full site Acrobat flakes out and dies. When it hits around 13,300 pages, it dies.
The troubling thing for me is that I was able to do the same thing in Acrobat Pro 7. I made a file with almost 14,500 pages. Because of the way Acrobat must be installed in Windows, I can't easily go back to version 7. It is a real pain not to be able to do something in the "New and Improved" version that I was able to do in the "nasty old" version.
It would be helpful if Acrobat had better logging and error logging facilities. Maybe there is one page that is hitting Acrobat's bug, and if I could eliminate or change that page I could continue, but there is no way of knowing (as far as I know).

Inventory SnapShot Cube and Daily Load Cube

Our requirement from the snapshot cube is to provide queries which show end of month balances similar to as what is shown if I run queries from the Standard daily cube (0IC_C03).
The scenario is as follows:
Query requirements are to show ending balances for the period:
Details are as follows
1) I create a query based on the 0IC_C03 cube, the characteristics are say for example plant and fiscal period and the key figure is Quantity Stock
The results will display the balance at the end of each period so for example
The Key Figure in this cube is non cumulative and is 0TOTALSTCK
Period: 01 Quantity: 0
Period: 02 Quantity: 5
Period: 03 Quantity: 8
Period: 04 Quantity: 2
Period: 05 Quantity: 2
Period: 06 Quantity: 2
Period: 07 Quantity: 2
2) I create the same query off a version of the SnapShot cube as defined in the How to Inventory guide
The results displayed are the movements (changes)
Period 02 Quantity: 5
Period 03 Quantity: 3
Period 04 Quantity: -6
Has anyone got a solution so that I can have the same result set for example 2 than what I get in example 1?
At the moment the approach I plan to take is to datamart 0IC_C03 and work with the cumulative key figures which are used in 0TOTALSTCK. I would like thoughts on this approach and solutions otherwise. Thanks

hi
You have to compare the exception aggregation set for every key figure and the defined time charecterist
Regards
N Ganesh

How to access my website created from another computer and location?

I am a beginner. My nephew made an e-commerce site for me using dreamweaver on a Mac. I purchased dreamweaver cs5 and have windows vista. He sent me the FTP address, username and password. I opened dreamweaver and am asking what to do to access and download the files?

but it keeps saying that the local files should match exactly to the web which I obviously don't have.
What's the exact message?
The whole purpose of connecting is to download remote files to local so they mirror each other.
It describes how to up load but not download.
Download is the exact opposite of upload.
Select Remote View, select all files, click Get.
When I get to that point, that will download all the webfiles into my local folder rewriting everything there?
Yes.
But you don't have any files locally which will be overwirtten, do you? Just an empty folder waiting to be filled with files from the Remote server.

Difference between CP-PWR-CUBE and CP-PWR-CUBE-3 for 7941G

Hi
Anybody know if an older CP-PWR-CUBE will fit and work with a 7941G ?
Cisco recommends the CP-PWR-CUBE-3 in the user guide but the specs seem to be exactly the same.
I just want to know whether I can just buy the cheaper CP-PWR-CUBE for my 7941G and I won't have any issues using it.
Thanks

Hi Alan,
The plug is a little longer because on the newer IP Phone models like the 7941G there is an additional piece of plastic (in a semi circle) around the power plug input on the base of the phone. This can be easily trimmed with a pair of side-cutters and you are good to go :) It depends on how much $$ you will be saving, if you want to go this direction. A 30 second trim job and "Bob's your Uncle"!
Hope this helps! Cheers!
Rob

How to get Cube and Dimension ID from SSAS Database programatically

Hi All,
I am processing one SSAS cube from SSIS package and processing the cubes dynamically .For this am putting the Cube ID ,Cube name, Dimension ID, Dimension Name in a table and generating the XML programmatically.
I can right click the properties of the dimension and cube and will get the ID information. But is there any way we can get the ID information programmatically .So that On the fly I will get the information and create the XML without storing
the these information in table.
We are using 2008 R2
Thanks in advance
Roshan

Hi,
Here is the C# code you want. Try it and see.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Xml;
using AMO = Microsoft.AnalysisServices;
namespace ConsoleApplication4
class Program
static void Main(string[] args)
AMO.Server oServer = new AMO.Server();
oServer.Connect(@"Provider=MSOLAP.5;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=AdventureWorksDW;Data Source=DEVWKS6\MSSQLSERVERMDX");
foreach (AMO.Database db in oServer.Databases)
foreach (AMO.Cube cube in db.Cubes)
Console.WriteLine(System.String.Format("Cube Name : {0} Cube ID : {1}", cube.Name, cube.ID));
foreach (AMO.CubeDimension dim in cube.Dimensions)
Console.WriteLine(System.String.Format("Dimension Name : {0} Dimension ID : {1}", dim.Name, dim.ID));
System.Console.WriteLine("");
System.Console.WriteLine("");
oServer.Disconnect(true);
oServer.Dispose();
System.Console.ReadLine();
If you know your target SSAS Database Name, then you could use LINQ to narrow your search. Take a look into the following Code.
AMO.Database db = oServer.Databases.Cast<AMO.Database>().Where<AMO.Database>(SSASdb => SSASdb.Name == "AdventureWorksDW").FirstOrDefault();
foreach (AMO.Cube cube in db.Cubes)
Console.WriteLine(System.String.Format("Cube Name : {0} Cube ID : {1}", cube.Name, cube.ID));
foreach (AMO.CubeDimension dim in cube.Dimensions)
Console.WriteLine(System.String.Format("Dimension Name : {0} Dimension ID : {1}", dim.Name, dim.ID));
System.Console.WriteLine("");
Best Regards...
Chandima Lakmal Fonseka

How to add FISCAL YEAR, Period and Day to cube.

hi,
I am using SD EXTRACTORS (2LIS_11_VAITM, 2LIS_11_VAKON, 2LIS_12_VCITM and 2LIS_13_VDITM) and directly updating each corresponding ODS and cube.
All the extractors only have FISCAL VARIANT has the time characteristic. So, all my ODS contains only one time char - fiscal variant and other dates (liek document created date etc. (not a time char)).
Now, I want to use fiscal period, fiscal year and fiscal day in my cube. I have added these time char in my cube.
My question:
1. how to get FISCAL YEAR, FISCAL PERIOD and FISCAL DAY get updated. Do I need to map to document created date in update rules or Do I need to use some functional module.
Pls note I am bringing only FISCAL VARIANT from R/3 into ODS and then to CUBE.
PLS REPLY.

thanks sundar..i got your point..but I have one question
All the cubes (sales, sales condition and billing) have the sales order number (VBUK-VBELN) and item number (POSNR-VBUK). But info objects used for these fields in sales cube and sales condition cube are same but for billing it is not same.
Can I combine all cubes (sales order, sales condition, billing) in muliti provider.
1. Sales order cube (from VAITM)
           Sales order number (VBUK-VBELN) -- (0DOC_NUMBER)
           Sales Item (VBUK-POSNR)              -- (0S_ORD_ITEM)
Date : Document created date (VBAK-AUDAT) -- 0DOC_DATE
2. Sales Condition cube (from VAKON)
           Sales order number (VBUK-VBELN) -- (0DOC_NUMBER)
           Sales Item (VBUK-POSNR)              -- (0S_ORD_ITEM)
Date: Document created date (VBAK-AUDAT) -- 0DOC_DATE
Key field: Netprice (VBAP-NETWR) -- 0NET_VALUE
3. Delivery Cube (from VCITM)
         Sales order number (VBUK-VBELN)   -- (0DELIV_NUMB)
         Item   (VBUK-POSNR)                         -- (0DELIV_ITEM)
Date: Delivery Date :LIKP-WADAT_IST      -- 0ACT_GI_DTE
4. Billing Cube (from VDITM)
          Sales order number (VBUK-VBELN) -- (0BILL_NUM)
          Sales Item (VBUK-POSNR)              -- (0BILL_ITEM)
Date: Billing Date: (VBRK-FKDAT)             -- (0BILL_DATE)
Key field: Net price (VBRP-NETWR)       -- 0NETVAL_INV
I want to combine above cubes. If I combine, Will I get correct data??????
Points will be assigned to every useful answer

Insert Object (create from pdf file) in wordpad fails

Problem:
I am unable to insert object (create from existing pdf file) in wordpad application.
Environment:
OS: Windows 7 Professional + SP1 (64-bit)
Acrobat X (32-bit installer)
Procedure:
Open Wordpad application, click on 'Insert Object', choose 'Create from File', Browse and Select exsting pdf file, click 'Display As Icon' and Click 'Ok'
Expexted Result:
PDF should get inserted as OLE object to wordpad
Actual Result:
Error message "Failed to create object. Make sure the application is entered in the system registry."
Addition Notes:
I noticed that while insterting PDF (OLE object) it seach for certain registry key (AutoConvertTo) which is not available hence it fails.

Yes, I am aware. But this problem appears only when I insert PDF file (which is Adobe file).
I guess this has nothing to do specifically with 'wordpad' but I referenced known application from standard offiering. It happens with any 64-bit application using 'rich-edit' control (this is Microsoft too ) and allowing user to insert OLE objects.
I guess somewhere Adobe Acrobat installation fails to create required registry entries which are being referred by 64-bit applications while inserting PDF files as OLE objects.

Mount STANDBY with EE software created from SE production database

We mount (by error) our STANDBY databases with Enterprise Edition EE softare.
Our production database is Standard Edition SE.
We apply the logs without problem, but we have intention the mount the STANDBY database with SE software.
-> Could be possible mount the STANDBY database without need to recreate it? Remember the origin db are created from SE software and mount the STANDBY with EE software.
Thanks you!
Any help are welcome.
Diego.

Please read Note:139642.1 on metalink.

I am unable to open PDF files created from another PGM.

Is there an ADOBE pgm that will properly read in PDF files created from another pgm and convert them to ADOBE PDF so they do not error when they are opened to be viewed by ADOBE pgm?

There is no way to know all the different scan/fax/pdf printers that are used to make the original PDFs...
CAD-KAS PDF Editor 2.6 is used to edit the files
doPDF 5 is used to modify pdf file.
Interesting, I can use the free CAD-KAS PDF reader to open & read the PDF file that the ADOBE XI reader
gives me the above error message.

Remodeling the cube and adding sales document number

HI guys
I have a requirement of sales order number in the sales over view cube ( 0sd_c03 ) so i am planing to remodel the cube to add sales order number and item
as i can not create a new dimension i have to add these two charecteritics to a old dimension
so whether it will give any perfomance issues later on as the sales document number will increase the
records in that dimesion or can i go ahead to do it or i have to delete the data in cube and change the cube adding a new diemension ( line item dimension)
please suggest..
Regards
Amiya

Hi Amiya,
Regarding ur case ..
In my opinion, it should be separated into different dimension ..
Because it will make that old table dimension become have huge data,
it will make slow in fetching the data.
To make it.
1. Edit Info-Cube using t-code RSA1
2. Create new dimension, and insert dummy characteristic, then save, and activate it.
3. In the remodeling, t-code: RSMRT, you can add those 2 characteristics there, you also can initilize the value for those characteristic.
4. Then, in the remodeling, you delete the dummy characteristic.
Hopefully it can help you a lot.
Best regards,
Niel.

Can we add new cubes and ODS after creating the multiprovider?

Hi all,
i created a multiprovider on a cube and ODS. Now i needed one more charactersitic from other cube.then i did change multiprovider and then add that new cube and did the identification, and adjusted the query, when i ran the query it is showing chracteristic as # and not assigned. I even tried bringing in 0infoprovider object to see whether data is coming from third infoprovider, it is not showing up any data from third one. i tried logging out of bex and logging back in.....but still no use..............i am wondering now, once a multiprovider is created can new infoprovider be added to it ?
i am even able to see the new key figures and chracteristic in my query.but data is not getting populated...i also checked and found that the data is available in the infoproviders....
plz help me out..
points will be assigned for inputs

Hi Bhanu,
nice to see your answer, I saw a lot of helpful posts on SDN by you.
I did the RSRT with debug multiprovider, it said,
0FISCPER: General restriction for InfoProvider ZSD_C12 not possible
Access to ZSD_C12 was excluded
now i corrected it, it is populating the key figure now but not the chracteristic still.....the chracteristic is still getting value only from one of the info providers
importantly, when i bring infoprovider above the keyfigures space on query, it still only shows two info providers for each key figure and not the third one ,the key figure coming the third one is only shown in overall result. how can i solve this?
i tried rsr_gen_direct_all_queries as told by krian, but still cant get the data in the report. i did list cube on mulitiprovider and i see the data for that chracteristic there....
are there any other options in RSRT to find possible setting faults....
thanks in advance
points will be assigned for inputs

Report with data that is present in cube and not in ODS from a multiprovide

Hi Friends,
I have a multiprovider with one cube and one ODS. I have a requirement to create a exception report. This exception report should have records that are present in cube but not in ODS. If cube has a record which is present in both infoproviders then report should not display that.
I hope I am clear on my question.
Thanks and regards,
Balaraj

Thanks Timur,
But this is going to give me all the data present in that selected cube. I want to the report to display data only if it is present in cube but not in ODS.
ODS data
Material............Component...........Amount
10001.................30001................100
10001.................30002................200
Cube Data
Material....................Amount
10001.......................100
20002.......................200
My report should display
Material................Amount
20002...................200
It should not display 10001 as it is present in ODS.
I hope I am clear this time.
Thanks and regards,
Balaraj

Creating Queries from Cubes and ODS

Dear Gurus:
I'd like to learn how to make queries from ODS and CUBES. can any Guru out there prescribe a particular infocube / ods project for me to make report on in both 3.5 and BI 7? I can send daily reports on my progress. I think this is the only way I will learn.. I may even have to seek help to create a simple architecture from Source DataSourc to Target Data Source to transfer Rules to InforSource to ODS to Cube and then fuill it with practice data just so that I can design a query / queries... Can any kind BW Guru offer me his/her assistance please... I may run out of a job if I dont learn soon...
<b>By the way... I would like to make it known that I am starting out totally from scratch.... As in ZERO BW 3.5 and/or BI 7.0 experience nor application background in either. Hence the why I seek expert advice.Your kind support, understanding and advice will be greatly appreciated to no end!</b>

The best way to start off is by reading the material on BW. The link below will give all the materials.
http://www.mysapbi.blogspot.com/
The to get hands on experience follow the scenarios in the best practices the link is below.
http://help.sap.com/bp_biv335/BI_EN/html/Bw.htm
And to get a tutor the best way I know is search for an institute in the following link
www.sulekha.com
Hope this helps.
Bhargava

MultiProvider Created from #.5 cube and 7.0 Cube

Similar Messages

Maybe you are looking for