Muvo tx SE spar

I have a Muvo TX SE gb and i have just managed to crack the plastic screen, the lcd is ok. Can i get a replacement screen form anywhere?
Cheers
Steve

i cant now ebuyer said they will not refund my money. so i cant even purchase from there store either.
i might as well stick with them repairing it. for this year. and use it till it dies again. i think that the muvo tx se has a design fault. which has to be the fact that its removalable and the usb head on the player is prone to damage.

Similar Messages

MuVo TX FM works on PC but won't start on it's

Hi Guys,
I have a Creative MuVo TX FM that works well when it's plugged in the PC but would not start on its own (as an MP3 player). So now it's demoted as a mere flash dri've.
So far here's what I've done:
. Upgraded the firmware (MuVoTXFM_PCFW_LF__23_03)
2. Tried doing the recovery mode but the "New Hardware Found" dialogue box would not appear (instead the taskbar baloon "This device can perform better" appears), also installed the "Mass Storage Device" drivers (MStorage_PCDRV_LB__07_00_250)
3. Cleaned the contact point / ports in the battery module and USB dri've
4. Used a spare batter module to check if it's the one failing (I have another TX FM that seems to have died already)
5. Batteries are new, been buying around 8 batteries already thinking that it's a power issue... using Panasonic's Digital AAA (LR03 (T))
Still no avail.
I really love the functionality of the TX FM (File organization is really nice and it looks really great!!!), but after 2 mishaps (less than 2 years, both we're purchased almost the same time, and failed almost the same time) it's really starting to bother me if I would choose Creative as the next MP3 player of choice.
Would really appreciate any help.
Thanks,
Gary Lamanilao
Philippines

Hi Guys,
Still got the problem, just some minor updates.
Mananged to actually do "recovery mode" using Windows XP SP2... here's the procedure:
. Wait 'til taskbar baloon "This device can perform better" appears... if new "New Hardware Found" dialog box fails to appear.
2 Run the Firmware, it will prompt you that it recognizes a device under recover mode.
I was hoping that after sucessfully doing the recovery mode would resolve everything... but alas the Muvo Tx FM still fails to fire up on it's own. I tried probing the battery, the connectors inside (dismantling the battery module), and the battery module port / terminal (middle terminals?), I'm getting consistent .5V... that would scrap battery module problems right?
Any leads? Really desperate of getting this fixed...
Would really appreciate any help,

Has anyone bought this Creative Labs MuVo V10

Creative Labs MuVo V00 GB
I want to buy one, and I find a deal for it is $35.
http://dealstudio.com/viewtopic.php?t=3497&ru=283
Has anyone bought this one, do you like it's Is it a good price?

For only the g model, not such a good price. I see competing g devices for about $20.00. I have the 2g Muvo00. I like it- especially uses AAA batteries- never worry about it dying unexpectedly. I cut a slit in my workout shoes and keep a spare AAA there.

Muvo V200 battery cover's tab l

Hi from Spain,
I've lost the battery cover's tab of my Muvo V200. I've read that Creative has a service in USA were they can supply some spare parts. Anyone knows which is the situation in Europe?. I can't use my Muvo without the this part and is frustrating, 30 euros to the bin, and a wonderful player, for a piece of white plastic.
Thanks

First of all many, many thanks for your help :-D. I will call the phone number today and I hope I get a positi've response. I plan to buy some items from the creative shop for my lovely Zen Micro (I like Creative products, you know, Sound Blaster, EMU, Creative cam... :-)). I was held by this incident though. Why? no one wants a product that is difficult to get spare parts for, at least not me. I trust Creative and I hope their customer support is as good as their products or as their comunity :-D.

Help With MuVo V2

To anyone who can spare 5 minutes to read this and give me feedback, I will be very greatful for your help =)
I switched off my mp3 player (it's a MuVo V200) to the radio mode. When I switched it on I wanted to return it to the music mode, and it automatically switches off.
At first I thought it was the battery- i have bought batteries of 2 different brands and both have not worked.
Has anyone faced the same problem? How did you fix it's
Once again, thank you for reading this and I hope you are able to help me =)

That was frustrating me also, could not find my device, but as you suggested, I changed the country to germany and guessed my way through selecting device, etc. Muvo V200 is what I have. I downloaded and executed the mstorage file, and the folder ends up at the programs folder... creative... mstorage and I do see in there the two .inf files and the one log file says everything installed correctly . However I am running windows 98 and for the life of me, I point the wizard directly to the mstorage folder and it still says it cannot find the driver. I also downloaded both the Muvo V200 installation program and the other program to organize the music and transfer, etc,. both of them requires the device to be connecte and detected in order to finalize installation, so I am like the chicken and the egg going in circles... I thought the Installation program would take care of everything but it just hangs up on detecting the device which of course it will never detect because I cannot get the device to install... you see how I am going in circles... This was a promotion from SBC when I ordered dsl and dish, so I am not too worried since I did not pay for it, but it came without the installatin disc, we are supposed to download everything from the site... I am frustrated... anything you can help with will be greatly appreciated... I have two USB ports, I have tried both they are 2.0 by the way.. I also have 2 extra USP ports from the keyboard those don't work either, even though they work fine for my digital camera and my webcam...,,, now I am rambling... Please help

Satellite P200-1EE Can I install a 2nd hard disk in the spare bay?

First of all, hi everyone!
I have the above model laptop, and it has a spare disk bay. There are pin connectors at one end, but it does not seem like the drive will fit. It's like there is a component missing - like the connector slot housing for the 1st drive. I have bought a 500GB drive, and have tried seeing whether it would fit. The 1st drive has a metal caddy attached, and that did not work either.
Is it possible to fit a 2nd drive to this model? If so, what would I need to do it?
Thanks!
Andy

Hi
If you have a connector in second HDD bay you can add a second HDD. But you will need such a metal caddy as on the first HDD. Therefore you can contact an authorized service provider because you can get all spare parts from them.
On the Toshiba website is a list of all ASPs, check this!!!

Sir, We have around 500 items as Insurance Spares in the stores. These spares are checked once in 6 months for their healthiness, storage, etc with a special checklist. We want this checklist an schedule in SAP ( MM). How to do it? Please help.

Sir, We have around 500 items as Insurance Spares in the stores. These spares are checked once in 6 months for their healthiness, storage, etc with a special checklist. We want this checklist an schedule in SAP ( MM). How to do it? Please help.We are presently doing it as similar to PM schedule ( PM module) but want it in MM module.

Hi Prerna
Please refer the this doc ...it might help you
http://www.erptips.com/Samples/ERPtips-SAP-Training-Manual-SAMPLE-CHAPTER-from-Basic-Quality-Management.pdf
and kindly update the status if it works or not
Regards
Partha

MuVo does not show up in "My Comput

I have an Emachines 2.92 ghz system with 024 ram running Windows XP and I do have Adminstrati've rights. I installed the software on my computer as instructed. When I rebooted and then attached the Muvo txfm to my usb port. The Muvo screen shows the moving USB icon as pictured in the instruction manual but it was NOT recognized in "My Computer".
There was something under "Control Panel" called Muvo system folder I think and when I clicked that, it said there was no dri've connected and that I should connect the dri've to the USB port. But it already was connected. I tried another USB port but the system would not recognize it from there either. It is listed in Device manager under dri'ves and there is no question mark or exclaimation mark there or anywhere in Device Mgr. but when I select the dri've to go into "Properties" the computer freezes for about 20 seconds. Then properties opens up and it says "there is no problem with this device." A window came up in my taskbar saying there was a problem with hardware installation so the device may not work properly. I disconnected all usb devices and connected the Muvo again but it doesn't show up. Then I rebooted, attached the device again but still the same problem. Then I unistalled the software and attached the device to the USB port and a window came up saying the hardware was installed and the device was now ready for use but it still is not in "MY Computer" so I am unable to access the device to do anything with it. It is in Device Mgr as "disk dri've" now. Then I deleted the device from Device Mgr and rebooted. I installed the driver update called "MStorage_PCDRV_LB__07_00_250.exe" from your website and then plugged the Muvo into the USB port again and it showed up there as Muvo TXFM but still not in My Computer listing.
I tried to install the Firmware update from your website called: "MuVoTXFM_PCFW_LF__9_0.exe" but because the Muvo doesn't show up in "MY computer" it is unable to find the device and it just hangs as it looks for the device.
OK, now I'm thinking the Muvo is a defecti've player so I plugged it into my 998 Dell computer running Windows Me. with no software installation at all and it showed up in "My Computer" in a matter of seconds. I even put a song on it from the Dell computer. So wassup?
Thanks for your help
P.S. I also did these two registry fixes allowing permissions on both (but they were already set to that anyhow) so it did not fix it:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\U SB
And also I downloaded and installed the three microsoft fixes I found on one of the many posts I read on this forum for media player and something else. I cant remember what, I am just so exhausted!

Connect your player and find its entry in Device Manager. Click on Remove then disconnect player. Also select Show Hidden Devices and remove any extra entries for your player.
Go to Control Panel, Add/Remove Programs and remove the MuVo drivers, Mediasource and Media Explorer software.
Reboot PC and then re-connect player - it should be detected immediately by XP.
Another thing it might be is if you are using a front-mounted USB port on your PC - these don't always supply enough current. They allow the player to be seen but not enough to actually do anything with it.
If you choose View Devices by Connection in Device Manager with the player connected and drill down to find the entry for your player, you can look at the properties for the controller and hub that it is connected to. One of these shows the current equired and the current available.
PB

Having a Problem with WMA DRM and Muvo TX FM - Upd

No elapsed time problem with WMA DRM or other protected files from:
Napster
WalMart
Audible.com.
Elapsed time problem with WMA DRM from:
Netlibrary.com
This is an update on the problem that I described below:
Windows Media Player
One problem I had was that Windows Media Player would not recognize my muvo players. It turned out that because I was using a USB hub for the players to connect WMP was not recognizing the players. When I used a direct line to the USB port on the computer, WMP has no problem recognizing the player.
Digital License.
As a test, I bought a WMA song file from WalMart to see if its Digital Rights Management was compatible with Muvo. There was no problem with the correct elapsed time showing. I will also test a file from Napster and add its license details here.
Here is something else I noticed - the differences in
the license for the two types of WMA files:
The one from WalMart - which works fine with the
elapsed time on the MuVo:
This file can be played an unlimited number of times
Collaborati've play for this file is not allowed
This file can be burned 0 more times<<<
This file can be synchronized an unlimited number of
times
The license for this file can be backed up <<<
For the one from netlibrary.com
This file can be played until 4/9/2005
Collaborati've play for this file is not allowed
This file cannot be burned
This file can be synchronized 3 more times until
4/9/2005
The license for this file cannot be backed up<<<<
I have been able to copy WMA with DRM audiobook files to my TX FM, but the elapsed time doesn't change with either play or fast forward. The file is from Netlibrary.com which supplies audiobooks to public libraries. The file plays, but the display stays all zeroes.
I have been sending information and getting replies and suggestions from both Netlibrary support and Creative technical support with no solution. I have the latest firmware and everything else. I have the problem on both Windows XP and Windows 2000 computers. I have downloaded several files, but none of them show elapsed time. I suspect it is something to do with the DRM, because I can play a preview file from Netlibrary - without DRM - with no problem. I also have no problem with other files copied over - from Audible, from CDs, etc.Message Edited by alex20850 on 03-30-2005 07:54 PMMessage Edited by alex20850 on 03-30-2005 08:4 PM

I'm primarily using my TX FM for netlibrary.com audiobooks and also get all zeros on the display.
I've been steadily complaining to netlibrary and my local library about problems/inconveniences, itcertainly is experiencing growing pains; we're the ones getting the pain, though!
I'll post here if I find a (legal) resolution to this.
What firmware version do you have? I have .2.04 and I see that .3.03 is available for download. I've read here that there are problems with .3 with volume limiting and I'm hesitant to change. I do notice that one of the listed fixes is:
Updates the elapsed time displayed during navigation within a long recorded track
so, maybe this is the answer?
Dr Dave

Report for Order and spare parts

Hello every one, i am looking for a report which can tell me order number wise use of spare parts. It can be either in order or some seprate report. I have not find any such report till yet. Kindly help me in this.
Regards
Abhishek

Baed on the requiremtns given, IW13 can also be auseful report for you.
SM

103 movement inspection for spares and engineering materials

can any body tell me how to control engineering and & spares materials when i done GR against 103 movement inspection lot is created but there is no control of goods is keep in quality but system allow 105 movement total quantity also how we will control the quantity if it is in quality stock any settings is required kindly send me guidelines

Hii,
103 movement is GR w.r.t P.O into GR blocked stock. Generally GR blocked stock means keeping the material outside the plant. The stock displayed in GR bloocked does'nt considered into inventory stock.
103 movement will be activated were the stores want to put some Quantity check on the material & where the Purchase dept does'nt want to take any accountability for the supplier deficit stocks. (In 101 immediately accountability take place and reflected in the inventory and FI document gets generated).
In MIGO after 103 movement, user can immediately release stock from GR block stock in the same screen (A05 Release from GR blockd stock). From Quality point of view u need to go with 103-105 movement type. Here don't activate Quality for 103 movement but activate quality for 105 movement type.Bcoz in 103 after inspection, u cannot show defect material in Blocked stock and it will remain in GR blocked stock. Confusion remains between new material and defect material where bothe will remain in GR blocked stock.
In short 103 - Quantity check (stores activty, no Inpsection lot)
105 - Quality check (Quality activity. Inspection lot)
Edited by: Lokesh K on Aug 10, 2010 1:03 PM

Need field and table for spare part material and price for a given material

Hi,
      In need to create a report with following fields:-
       Customer           Material          spare part material            spare part description             price                   currency.
From which table and field I can get all this information.Please guide me.
Hint. cl30n transaction for material managemant.
         vk13 transaction for price maintenace.
Regards.

CL30N is a general transaction that can be used for any classification, but material master maintenance is usually MM01/MM02 or MM41/MM42
Material description can be taken from table MAKT
customer from table KNA1
The question is what you are going to analyse? where do material and customer tie together? do you do the analysis on sales orders VBAK and VBAP ? or invoices VBRK and VBRP? or customer material info record KNMT?
or do you capture this info in classification? then you get the values from AUSP
Edited by: Jürgen L. on Aug 3, 2010 9:42 AM

Deletion OF schedule LInes from APO SPP(Spare Parts Planning) through ABAP.

Dear All,
I need to delete the schedule Lines from APO SPP(spare parts planning ) system.I am looking for any available BAPI provided by SAP for this purpose.Please provide me help if any of you folks previously in your project went through this requirement.
If any other way is there other than BAPI please suggest.
Regards
Mukesh Pandey

Hi Siddartha,
That option is not working.
Thanks

MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue) I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.

hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

Can i set up a spare box in my bedroom?

Im sorry if this has been asked a million times but ive had a look at a few posts but theyre not specific. Also, im not familiar with too much tech talk.
The new house had already black box (which we watch freeview on now) and a hub but obviously the web doesnt work now. I also found in a cupboard a brand new boxed silver box. Ive signed up to unlimited broadband and just recieved my new hub so just waiting for them to tell me its activated.
My main question is can i somehow use this spare box in the bedroom as it has all the bits, do i need an aerial or something upstairs or what are these radio reciever thingys ive read about? Also, is the old hub and stuff any use? I dont like throwing useful stuff away so any ideas?
Thank yooo!
Solved!
Go to Solution.

It uses a different system to the new boxes and requires an active subscription and internet connection. If you try to get a subscription they will supply you with a new box. It can't function on its own and if you connect it to the Internet it won't even boot up since it doesn't have an active subscription. It's a bit like trying to use an analogue TV.
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Muvo tx SE spar

Similar Messages

Maybe you are looking for