MVPN Client Configuration How-To?

From what I've read, configuring the Nokia IPSec VPN Client is nightmarish. I'm looking for a way to connect my E71 as an IPSec client to a Netgear ProSafe VPN router. The router is not listed as a supported VPN gateway by Nokia, but it's what I've got and I'd like to see if I can get the built-in VPN client to work before plunking down nearly $100 for the NCP Secure Entry Client for Symbian.
I'm not an expert in VPN configuration (or I wouldn't need to post this, would I?) but I've managed to get to IPSEC VPN gateway-to-gateway tunnels connected and stable. The Nokia mVPN promises to be a bit of a challenge.
Any pointers, please? Thanks.

Hello RMOP,
Apologies that I could not login to Nokia forum for long time.
I have done the configuration of Nokia mVPN with Cisco ASA, Strongswan and Nokia IP390 successfully. I have not done with Netgear. If you have the configurations done at Netgear, please let me know so that I can help you with the VPN policy file for Nokia mVPN.
Rgds,
Rafik

Similar Messages

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

How to deploy Client Configuration Manager on 400 workstations step by step

Hi to all,
I would like to know how to install SCCM Clients on 400 Workstations which no longer have it.Our netwok have 2250 workstations and 400 workstations don't have the SCCM client installed.How to create the deployment package?Or where to find it?
I tried to deploy it using the pushing methods.I've created a collection of workstations which don't have the client installed.theni tredthe pushing methods but no workstations received the clients.
Can i create a package on software distribution then deploy it to the collection?I know that it is not good for the network to deploy 400 workstations at once.
Thanks in advance for your suggestion.
Regards,

Can i create a package on software distribution then deploy it to the collection?I know that it is not good for the network to deploy 400 workstations at once.
If the systems don't have the agent already, a package can't reach them as software distribution requires the agent first.
Here's a very nice and detailed article on troubleshooting client push: https://support.microsoft.com/en-us/kb/925282
Remember though, it's not magic. Certain pre-requisites must be in place like permissions and firewall ports. ConfigMgr can't just conjure some voodoo to make these go away.
Jason | http://blog.configmgrftw.com | @jasonsandys

Multiple ECC clients configured to APO

Folks,
If multiple ECC clients (001, 002, 003) are configured with a single APO client(001), how does APO system deal with this without causing data issues.
Say if I updated Material master in all these 3 ECC clients, which version will be refelected in APO system.
TIA

Hi Pat,
Need to maintain different BSG: Business System Group for each R/3 by tcode : /SAPAPO/C2.
"Maintain Business System Group
    Use
    In this IMG activity, you determine the assignment to a business system
    group of the APO System and the SAP R/3 System to be connected. By doing
    this, you create areas with the same naming conventions. These guarantee
    that the same names are used for master data, and also their
    synchronization in distributed system landscapes.
    Requirements
    As an independent logical system, the APO System must, in addition to
    the SAP R/3 Systems, be assigned to a business system group (BSG).
    Activities
    o   Choose New entries.
    o   On the New entries: Overview screen, specify the following
    o   information for the business system group:
        -   An alphanumerical key (maximum of 10 characters).
        -   A description.
    o   Save your entries.
Example 1
An APO System is to be linked with two SAP R/3 Systems (A and B), in
which two different materials (for example a hammer and a screw), have
the same material number (100). Both materials are to be represented as
two different products in the APO System.
Assign both SAP R/3 Systems to different BSGs. Assign the APO System to
one of the BSGs.
o   SAP R/3 System A (Material number 100 = Hammer) -> BSG A
o   SAP R/3 System A (Material number 100 = Screw) -> BSG B
o   APO System -> BSG A
In order to avoid having two identical names and to be able to uniquely
assign the material numbers, you need SAP extension APOCF005. This is an
inbound processing product (transaction SMOD or CMOD).
Material number 100 from BSG A receives, for example, product number 100
in the APO System and material number 100 from BSG B gets product number
100_B. This allows you to uniquely assign the materials.
For inbound processing in the APO System, the following SAP enhancements
are available as customer exits for master data:
o   APOCF001 : Inbound processing location
o   APOCF005 : Inbound processing product
Example 2
An APO System is to be linked with two SAP R/3 Systems (A and B). In SAP
R/3 System A, a particular screw has material number 110. In SAP R/3
System B, it has material number 120. Both material numbers are
represented in the APO System by one product, with product number 110.
Assign both SAP R/3 Systems to different BSGs. If possible, assign the
APO System to the BSG whose data does not have to be renamed.
o   SAP R/3 System A (material number 110 = screw) -> BSG A
o   SAP R/3 System B (material number 120 = screw) -> BSG B
o   APO System (product number 110 = screw) -> BSG A
You use SAP enhancement APOCF005 to convert the local SAP R/3 material
number 120, to the APO product number, 110.
Note
For the time being, this second scenario is only supported for material
masters and product masters. If, for example, the same customer is used
with different BSGs in R/3 Systems A & B, you must create two separate
customer locations in the APO System. This applies for the vendor,
plant, and other master data.

SSL or TLS client configure problems !!

Hello,
I am using Solaris native DS5.1, configured to use ssl certificate based authentication (server now running ssl configured.
Using OpenSSL created certificate and certutil tools I created cert7.db for client solaris 9 and even redhat 7.3 client.
How I can tel the client to authenticate through ssl (port 636) and to use cert7.db (where to put cert7.db file now at /var/ldap ).
Also how I can test if ssl port 636 is working and accepting ldap queries.
N.B. The system is working fine with normal port 389 fine, all clients are happy without ssl.
Thanks
Farah

Sorry, I should have mentioned that you need to use the version of ldapsearch that comes with Directory Server - mine is located in /usr/iplanet/ds5/shared/bin/. So you will probably want to amend your PATH. You will also need to add the relevant libraries to your LD_LIBRARY_PATH - mine being /usr/iplanet/ds5/lib:$LD_LIBRARY_PATH.
I've successfully used OpenSSL to create my directory server certificate & have (finally!) got OpenSSL-created client certificates to work. All I can say is make sure the server certificate is trusted.
Incidently, you do not use the "-n" flag with the tstclnt command unless you are using a client certificate. My advice to use this command was probably misleading. Maybe the better way of testing your SSL connection is simply to run the relevant ldapsearch command, e.g.
ldapsearch -v -Z -p 636 -P /var/ldap -b "ou=people,o=myorg" "cn=*"

WDS - Client Configuration Help

Hi All,
I have many ap1252ap's, I have configured WDS on the one ap and it authenticate to itself OK - to the locally configured radius server.
state = wlccp_ap_st_registered
The problem is that I do not know where to go from here.
I have followed the docs (Fast Roaming, WDS) but I cannot get very far, in fact I do not think that my clients are even attempting to authenticate with my AP. I have modified the following taken from the sraom doc,
AP# configure terminal
AP(config)# dot11 ssid fastroam
AP(config-ssid)# authentication network-eap eap_methods
SSID CONFIG WARNING: [fastroam]: If radio clients are using EAP-FAST, AUTH OPEN with EAP should also be configured.
AP(config-ssid)# authentication key-management cckm
AP(config-ssid)# exit
AP(config)# interface dot11radio0
AP(config-if)# encryption mode ciphers ckip-cmic
AP(config-if)# ssid fastroam
AP(config-if)# exit
AP(config)# end
But something is still not right or missing. I have added users (or at least I think I have from an authentication point of view) with the username and password as the MAC of the clients to the local radius server, using command
ap(config-radsrv)#user xxx password xxx
But i do not understand how this links in with the client, basically how do I configure a client to attach using cckm, where do i put in a username and password for the network profile, if i pick leap, then I am prompted for the username/password, but what username/password is this, is it the username/password entered with
ap(config-radsrv)#user xxx password xxx
Any help would be much appreciated.
Regards

Hi,
Thankyou for reading my Post, I have managed to work out how to configure my WDS with usernames and passwords, if anybody else is interested, this is what I did.
dot11 ssid fastroam
authentication open eap method_clients
authentication network-eap method_clients
authentication key-management wpa
(method_client is basically a list pointing with IP of server providing WDS/Radius)
Interface dot11radio 0
ssid fastroam
encryption mode ciphers tkip
no shut
To configure user/passowords
conf t
radius local-server
user testing password testing123
then on client
athentication:
configure LEAP
user: testing
password: testing123
encryption:
tkip
the client should now authenticate to AP/WDS.
The only thing I have not worked out yet is how to configure a backup WDS. nor do I quite understand which of the authentication methods the client is using when it succesfully connects.
Please can you advise: When you have a username/password on the radius server, does it mean that any/or all clients can use the same username/password.
or will the radius server detect that the login is already is use and prevent another attempt. reason behind my question is that if the username/password gets into the wrong hands.
Thanks and Regards

MI Client configuration settings

Hi
While MI 2.5 Client configuration we have to give the following settings Please tell me where and how I can get them:
1. Client
2. Host
3. Port
4. System
Specify detailed path for each.

Dear Anzar,
1. Client -> You have to use the client of the middleware system(i.e. MI server) which you are connecting to the client.
2. Host -> You have to use the host of the middleware system.
(i.e. MI server).
3. Port ->You have to use the port number of the MI server.
4. System -> System ID of the MI server which the MI client is connecting to.
You can get the values for Client, Host and System by logging in to the MI server(middleware system) which the MI client is trying to connect to and going to
System -> Status . Here, you will find the information you require.
Incase you are using a old technology, calculate the port by the following formula: 50000+ (system no: *100) used. For eg: if the system no: is 06, then the value of the port used shoule be 50600.
If you are using new technology, then you can get the port used by going to SMICM transaction in the MI server -> Goto
-> HTTP server -> Display Data.
Hope this helps you.
Best Regards,
Sapna

SCCM and Windows Update Client Configuration

Hello,
I am in the process of migrating SCCM 2007 client over to a new SCCM 2012 R2 site.
I deleted the AD site from 2007 and added it to 2012 and the client is pushed via Client Push. The client upgrades fine and things go well but
I run into a little problem after the client is installed.
Basically it seems to be an issue with how SCCM interacts with and controls Windows Update settings on the SCCM client. I ran into a somewhat of a major issue that caused
all (or many) of the newly upgraded clients to go the internet to download updates from Microsoft shortly after the move from the 2007 site and client upgrade to 2012. This was because the client (or at least the ones I checked) had their WU settings to “Always
download and install” (or something similar). Obviously, expected behavior with this setting, but the question is how did it get this way?
Does SCCM control any of these settings? I know it take over the WSUS settings, etc, but I didn’t think it does anything with the WU client itself.
From my understanding the WU client settings are done via GPO (local or domain) or WU setting and SCCM does not control these settings.
I’m not looking for you to solve the problem, because it’s quite tedious, I’m just hoping that someone can lead me in the right direction to find out what if any WU settings
are controlled or changed by SCCM 2007 or 2012.
Thanks
Angelo
Angelo

Thanks for the extra info, Idan. I should probably admit that I am an AD admin and SCCM is handled by someone else in my department. My main issue with the LocalGPO is the Event 1096 corruption that causes all admin template settings to revert
to defaults - currently happening on over 100 workstations in our environment. 100% of these problems are caused by LocalGPO corruption and nothing else. And we will pursue resolution of this issue with Microsoft because we agree that resolving
this problem is the primary goal.
But for the sake of understanding: We don't have any non-domain members that need to be managed by SCCM. If we had a policy stating "no SCCM client configurations resulting in a LocalGPO file are to be implemented in production - all are
to be done via Domain Group Policy," is it possible to eliminate the LocalGPO entirely? Or will there always be a LocalGPO file regardless of whether or not there are settings visible from it in a gpresult report? We would not need to match
SCCM configurations in Domain Group Policy because we would not make any changes to the SCCM client resulting in a LocalGPO file at all. The slow link detection is not of concern to us because none of these settings that would not apply in this case
are SCCM-managed via LocalGPO (as far as I know):
http://blogs.technet.com/b/musings_of_a_technical_tam/archive/2012/02/27/gpos-and-slow-link-detection.aspx
Another reason why I would prefer to do these settings in Domain Group Policy is that we have Advanced Group Policy Management installed in our environment, which is subject to our Change/Release process. We can track the changes being made to clients
much more easily when they are done via AGPM. Any changes that we want to make via SCCM client could be tested first to see how LocalGPO is effected, and then those changes could be made via Domain Group Policy instead in production.
Given this info, I'm still struggling to understand why it is recommended to implement anything via SCCM client configurations resulting in a LocalGPO file. So far, the only compelling reason is that management of non-domain members is not possible
via Domain Group Policy, but that doesn't apply to our environment. Is it recommended mostly for ease of administration, so that an SCCM admin doesn't need to work with another tool (Domain Group Policy)? Any extra reasoning for this recommendation
that anyone can provide is much appreciated!

I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

try
http://support.apple.com/kb/ht2589

Error while crawling LOB contents in SP 2013:'Could not find default endpoint element that references contract in the ServiceModel client configuration section

Hi,
I created custom BDC Model using Visual Studio. In ReadList method i am getting data using Web Service call. Using this External Content Type (BDC Model) i created one external list and it is populating with data.
I created one new content source in search service application using this BDC Model and when crawled this content source i am getting the below error.
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Runtime.RuntimeException MethodInstance with Name 'ReadList' on Entity (External Content Type) with Name 'Entity1' in Namespace 'bcsex.BdcModel1' failed
unexpectedly. The failure occurred in method 'ReadList' defined in class 'bcsex.BdcModel1.EntityService1' with the message 'Could not find default endpoint element that references contract 'ServiceReference1.Service1Soap' in the ServiceModel client configuration
section.
I included the bindings and client end point configuration settings in web.config file located at
\\Inetpub\wwwroot\wss\VirtualDirectories\Port_Number, but still getting the same error.
Please help. Thanks a lot.

The Issue resolved by including the bindings and client end point configuration settings in
machine.config file located at C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\ and also restarted the server after config changes.

I uninstalled Itunes because message "Itunes has stopped working" i attempted to reinstall now get error message "error occurred during installation before itunes could be configured" how to i fix for windows 8.1

I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.

See Troubleshooting issues with iTunes for Windows updates.
tt2

If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

If I install the Mail server on a Mac Mini as a server, can my users utilize Outlook as their mail client and how will it be different for them?

Your users can utilize Outlook no matter where your email is hosted at.
how will it be different for them
different from what?

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

Issue with client configuration for CuciLync 9.2.5

Hi,
we are currently preparing the client configuration for CuciLync 9.2.5.
When CuciLync starts we don't want to see the CuciLync window in the foreground.
Therefore we use the 'hubvisible' setting.
%APPDATA% \Cisco\Unified Communications\Jabber\CSF\Config\jabberLocalConfig.xml
<userConfig name="hubvisible" value="FALSE"/>
In addition we use this setting in the file
ProgramFiles%\Cisco Systems\CUCILync\jabber-config-defaults.xml
At first it looks like that the setting works fine.
But CuciLync always resets 'hubvisible' to 'true'.
Any idea what needs to be done to ensure that the setting is not overwritten ?
Thanks in advance for your feedback
Best Regards
Carsten Lucy

that might help
http://mysite.voicebootcamp.com/index.php/free-video-labs/video/uc-collaboration-ccie-collaboration-chapter-4-1-voice-gatew

Oracle 11g client Configuration

Hi All,
I have Oracle 11g Server installed on my Linux box.
I want to use Oracle client 11g on my windowsXP access to the Server that on my linux box.
when i go to "Oracle-oraClient11g_home1","Configuration and Migration Tools", "Administration Assistant for Windows". I couldn't find the server that i want to add.
Here is my client configuration on my windowsXP:
tnsnames file
# tnsnames.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = "myoracle server name")(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
listener file:
# listener.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = "it's my client Machine")(PORT = 1521))
Sqlnet file:
# sqlnet.ora Network Configuration File: C:\app\msokadmin\product\11.1.0\client_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
My windowXp is joined to the domain (ex. zzz domain).
Anyone who know and can help me about this, it will great.
Thanks to forum.
Marin

1. On your Oracle client side, you don't need listener.ora file
2. If you want to configure TNS Names on client, you run "Net Configuration Assistant" not "Administration Assistant for Windows"
3. You will not see a server drop down list like SQL Server did. No matter your join the domain or not. You need to enter the server hostname, port and Service name manually.

MVPN Client Configuration How-To?

Similar Messages

Maybe you are looking for