MX2004 Dreamweaver won't run in 10.5.8, any solutions?

I have been running Dreamweaver MX2004 on my (various Mac) computers for years now without a hitch.  Now I have just updated my OS to 10.5.8 and Dreamweaver will not load.
Does anyone out there have a solution to this other than buying a whole new version?  Don't have the deep pockets for that one and don't see why I should have to when my MX is all I need.

Thank you varjak paw it was actually running fine on 10.5 until I upgraded to 10.5.8.  I will see if I can go back to 10.5 and drop those upgrades.  Other than that I will reload 10.4 just to be sure.
As for Radiation  Mac, I can see why you deleted the rest of your comment, but the reason I didn't think I should have to upgrade was because I have been using MX for years since I bought it (land paid full price) and it was all that I needed with my home office; upgrading the system I didn't foresee (not a mind reader) any problems as all my other applications (old and well worn but adequate) have sailed through perfectly to the new .8; no hiccoughs at all.  Some of those programs date back to Methuselah, so I don't see why adobe has to be different.

Similar Messages

  • Java won't run in Safari, FF, or any other browser

    I need to use a lot of Java pages for work. They used to function fine with Safari and Firefox, but now, neither browser can access any page with Java content on it. Firefox gives me a dreaded "red X" with the error message that "Java Applet notloaded" and Safari actually hangs on the page that leads to the page with Java.
    Any suggestions? I'm desperate!
    Mini   Mac OS X (10.4.8)  

    Welcome to Apple Discussions
    The cache files for Java may need to be cleared.
    Go to your Applications/Utilities/Java and select Java 1.4.2 Plugin Settings.app Double click. Select Cache panel. Then "empty cache".
    Also, in the same Java folder double click on J2SE 5.0>Java Preferences.app
    The panel ought to look like this:
    If it doesn't make corrections as needed. Note the position of J2SE 5.0 and Java 1.4.2. If they are reversed, drag one to the correct position.
    Restart the system. See if that helps.
    Post back and let me know if that brought Java back on line.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.8)   LaCie 160gb d2 HD Canon i960 printer

  • BB Link software - another BB disaster? Fails to even run now - C++ Runtime errors - any solutions?

    As if the latest BB10 / BB Link software wasn't bad enough in terms of functionality - now BB Link won't even run. 
    I recently discovered by chance (thank for not telling any of your customers RIM), that they'd mildly updated BB Link so that it could actually now two-sync Outlook for contact/calendar etc. I've been using the updated software for about three weeks. Problem?
    Now it won't even run. 
    I get the following error showing on the screen - a C++ runtime error, followed by these details. Anyone know what it means or how to resolve it? 
    Would I better off actually chucking my Z10 out of the window, claiming on the insurance and just getting a phone from someone else? I probably would. Why, why, why do I persist with BB who refuse to release things that their customers want? 
    Rant over - any help, very much appreciated. 
    Attachments:
    BBLinkFailure-25.7.13.doc ‏1211 KB

    I have taken a look and while it's so tempting to just pay the miniscule fee and use that, I spose my gripe is that there is no reason why the link software should not work epecially as it did with my first Q10 (and brilliantly I must add) it's just since I had to exchange my handset that it's all got to pot.
    And worse yet no one at RIM seems to be forthcoming with a response (on the support site, or any of the many customer forums) about this issue which is effecting quite a few users (the forums are buzzing with problems with Link and no real way to report them. *sigh*
    I have taken a look and while it's so tempting to just pay the miniscule fee and use that, I spose my gripe is that there is no reason why the link software should not work epecially as it did whit my first Q10 (and brilliantly I must add) it's just since I had to exchange my handset that it's all got to pot.
    And worse yet no one at RIM seems to be forthcoming with a response (on the support site, or any of the many customer forums) about this issue which is effecting quite a few users (the forums are buzzing with problems with Link and no real way to report them. *sigh*
    Edit:
    From BBAppWorld:
    Files & Folders is a unified file manager for your BlackBerry® 10 phone and cloud services.
    ★ Voted Best New App in CrackBerry Readers Choice Awards 2012
    ★ Redesigned and optimized specifically for BlackBerry 10 phones
    ★ Check out the 800+ fabulous reviews of the PlayBook version
    IMPORTANT! Having trouble starting our app? Try removing & reinstalling it.
    Features in this version:
    ★ Works with local files & folders on your phone & sd card, but also:
    ★ Dropbox, Box, Google Drive, Google Docs, SugarSync and Microsoft SkyDrive
    ★ files on your PC, via BlackBerry Link Remote Files (requires BB10.1)
    ★ Manage cloud services in exactly the same way as local files & folders
    ★ Peek back to higher level folder
    ★ Unique "peek forward" feature: look inside folders
    ★ Open files with default app, or choose which app to use
    ★ Open Google & SkyDrive files online
    ★ Cut, copy, paste, rename, delete, even between cloud services
    ★ Share files via other installed apps, BlueTooth, BBM, NFC
    ★ Stream audio & video from the cloud & play local files, folders
    ★ Star your favorite folders for quick access
    ★ List, icon, thumbnail views
    ★ Slide show, keep-awake, text viewer
    ★ Convert between many formats on-the-fly using Google Docs
    ★ Sort by name, date, size, type
    ★ Password protection
    ★ Light & dark color schemes
    ★ Q10 support
    ★ Highly configurable
    ★ Built-in help and excellent support
    CrackBerry said this about the PlayBook version:
    "It's easy to use, has a smooth interface, and is a great addition for the PlayBook."
    If you have trouble with our app, instead of posting a review, please e-mail us at [email protected]. That way we can offer you support.
    Like us on Facebook (http://www.facebook.com/FilesFolders), follow us on Twitter (@FilesFolders) or check out our site (www.innovatology.nl ) for news, tips, updates & more!
    From the looks of it it might still need remote file share to work ...can some one confirm or deny this pretty please?
    Slàinte.
    Not all things are good.
    Not all things are evil.
    But with an open mind...
    You can see the difference.
    Knowledge is power.

  • CS6 Image Processor won't run

    My company just updated our systems to CS6. I use the batch processing of the Image Processor a LOT, day to day.
    Everytime I try to run it now, I get "There were no source files that could be opened by Photoshop".
    The folder is full of jpgs....which open just fine in photoshop if I open them manually.
    I've reset the settings file, rebooted my machine, still won't run.
    Can anyone offer any help? Photoshop seems to be working fine on it's own, I'm only having trouble with the Image Processor :\

  • Certain applications won't run

    Certain applications won't run. Mail, Safari (I'm sending this with Firefox), and now Installer. The disc now verifies although I had to repair the disc earlier. This started when trash-emptying wouldn't complete. Disc Utility from the Tiger install disc found what it called a minor error - a file that was a little too big (don't remember the file) and free space a little too small. Here's the crash log when I try to run the 10.4.10 PPC combo update - after a hint I got in another thread about a problem like this. I believe the same file is mentioned for any of the apps that won't run. If you have any ideas how I should proceed, please let me know. Thanks, Joe
    ===== Sunday, November 4, 2007 2:01:07 AM US/Pacific =====
    dyld: NSAddImage() error
    dyld: Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    Referenced from: /System/Library/Frameworks/WebKit.framework/WebKit
    Reason: no suitable image found. Did find:
    /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore: unknown file type, first eight bytes: 0xCA 0xFE 0xBA 0xBE 0x00 0x00 0x00 0x02 /System/Library/Frameworks/WebKit.framework/WebKit
    Nov 4 02:01:39 joe-diederichs-powerbook-g4-15 crashdump[351]: Installer crashed
    Nov 4 02:01:39 joe-diederichs-powerbook-g4-15 crashdump[351]: crash report written to: /Users/joed/Library/Logs/CrashReporter/Installer.crash.log

    Joe Diederichs wrote:
    How bad is it to try to install the combo update from the Terminal? Thanks, Joe
    Well, it's this bad:
    First off, a disclaimer. I didn't think of this, and I've not tried it from the DVD, though I did check the commands on a booted system. But it looks like it should work to me.
    Okay, to use Terminal on the DVD, do this:
    First, open up the disk image for the updater and copy the ".pkg" or ".mpkg" file onto your desktop, since that's an easy place to find it. Eject the disk image and make sure the package file stays on the desktop. Make a note of the package's exact name, including capitalization. You'll need it later. Now, open the Terminal on your Mac and type the following:
    cd ~/Desktop; pwd
    Write this path down somewhere, and keep in mind that case counts. It'll be something like "/Users/username/Desktop".
    Now, take a look at the name of your hard drive. It's most likely something like "Macintosh HD". The main thing is to note any spaces in the name and note the name. I'm not sure whether auto-complete, and all the other good stuff, works in the Terminal on the DVD, so it's best to write these things down.
    Now, boot from the Tiger Installer DVD and open up the Terminal app from the "Utilities" menu. Now, you need to construct a command to open up the installer package for the update package. Here's how it should look (without customization):
    "/Volumes/Macintosh HD/usr/bin/open" -a /Applications/Utilities/Installer.app "/Volumes/Macintosh HD/Users/username/Desktop/MacOSXUpdCombo10.4.10PPC.pkg"
    A couple of things to note: first, the quotes around the first part are necessary because of the space in "Macintosh HD", same with the last part. Also, it's possible that the installer will open up the OS X installer package from the DVD as well. Just be really sure you're installing the update and not the full OS. Also, make sure you customize the username in the last part, just before "Desktop".
    Finally, if you've installed any updates after the 10.4.10 update (especially security updates), it's possible that the problem with the WebKit will not be fixed, since the 10.4.10 combo installer may not install the older version of the WebKit over the newer one. In that case, you might have to do the other updates that came after 10.4.10 to eventually get back to where you should be. And all this might be in vain if some other critical file is damaged, but hasn't been updated since 10.4.0.
    charlie
    P.S. -- Like I said before, I haven't tried this, and didn't even think of it. I found the general procedure at, of all places, the Washington Post web site in the comments to a blog entry. Look down toward the bottom.

  • CS3 Uninstaller won't run in Lion - how to uninstall manually?

    I migrated from a Snow Leopard Mac to a new Lion Mac (keeping the same username and keychain) and CS3 Web Premium runs fine, except Dreamweaver won't launch (just a blank dialog).
    I want to uninstall just Dreamweaver (if possible) so I can try reinstalling from disc, but I can't uninstall CS3 at all:  The "Add or Remove Adobe Creative Suite 3 Web Premium" alias in Utilities asks for my password... and then simply exits.
    How can I uninstall Dreamweaver CS3 manually? I know you're not supposed to, but the steps must exist: whatever the uninstaller does, I can do--if I know what to do. (I'd rather not uninstall all of CS3--if I even could--since Photoshop/Flash/Illustrator are working fine, and I've got all my custom settings in them.)
    Or, can I troubleshoot the uninstaller?
    Thanks!

    The Previous link should have taken you to this link:
    <http://download.macromedia.com/pub/creativesuite/cleanertool/mac/AdobeCreativeSuiteCleaner Tool.dmg>
    Or to this link:
    <http://kb2.adobe.com/cps/829/cpsid_82947.html>
    Although the link is for CS5, I am told that it also works on CS3, CS4, CS5, CS5.5
    You need to read the both links from top to bottom.
    Good luck.

  • Dreamweaver won't start

    Please help...
    Suddenly my Dreamweaver won't start up! When I click on it I
    get an egg-timer for a few seconds then it stops and nothing
    happens. On occasions it gives me the option of design or code
    view, and then nothing. I've uninstalled and re-installed twice but
    it's still the same. Fireworks and Flash to start up fine. Any
    ideas?

    C:\Documents and Settings\<user>
    where <user> is YOUR user name on the computer.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "mightymiller" <[email protected]> wrote in
    message
    news:edhq95$cbc$[email protected]..
    > I've uninstalled MX2004 and borrowed a copy of
    Dreamweaver 8. I can now
    > view
    > the hidden files (thanks Jo - never thought of that!)
    but get the same
    > thing
    > after installing it. I can't get to the path suggested -
    I get
    > C:\Documents and
    > Settings\All Users\Application
    Data\Macromedia\Licensing\Products or
    > C:\Documents and Settings\All Users\Application
    > Data\Macromedia\Licensing\Licensing
    >

  • I formatted the harddrive and reinstalled CS5 Design Premium, but Dreamweaver won´t install again.

    I formatted the harddrive of my Macmini from 2010 2.4 Ghz Intel Core 2 Duo, 8 GB 1067 MHz DDR3, Mac OSX 10.6.3 or 10.6.4 (snow leopard) and reinstalled Adobe CS5 Design Premium student edition, but Dreamweaver won´t install again. I downloaded a new CS5 from Adobe yesterday, but it doesn´t help. What´s wrong?

    You would have to provide the install logs to figure that out:
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
    Otherwise you should run the cleaner tool and try again:
    http://www.adobe.com/support/contact/cscleanertool.html
    Mylenium

  • Adobe Stock Photos Stuck in Trash and Photoshop CS2 won't run!

    Okay, I apparently did something stupid. I'm not even sure how this happened, but I realized that Adobe Stock Photos folder was sitting on my desktop (I'm using OS X 10.5.6). I don't know when this happened and I didn't think I needed it so I dragged it to the trash. NOW I cannot run any of my Adobe software (includes Photoshop CS2, Illustrator CS2 and GoLive CS2).
    I can see the folder sitting in my trash, but it won't let me drag it back out. So, just as a test, I tried dragging out the one other file (.jpg) and I can't get that one either. I know this isn't a Mac forum, but I'm desparate and cannot find anything to help me.
    Probably I am going to have to reinstall everything and (of course) I can't find my CDs!!! Please don't get angry if I'm asking the wrong question. I've done an internet search and I cannot find any solutions.
    Thanks, Anne

    Adobe stock photos does not even exist anymore.
    Have you tried deleting your trash? I have no Adobe stock Photos on my computer and everything works. try restarting the computer.

  • CS3 installs but won't run

    Ok - not sure if this goes in this section or not.. but it's a technical question.
    My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
    When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
    I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
    I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
    I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
    I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
    The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
    We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
    So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
    errrrr
    Anybody have any clues on this?
    =======================================
    LAPTOP SPECS:
    Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
    Operating System
    Genuine Windows Vista Home Premium
    Memory
    2 GB DDR2 SDRAM 677MHz (2 DIMMs)
    Hard Disk Drive
    120 GB SATA Hard Drive (5400 RPM)
    Video
    ATI RADEON Xpress1270 HyperMemory
    Media Bay
    8X DVD +/- RW w/dbl layer write capability
    Base
    Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
    Bluetooth Wireless
    Bluetooth Wireless Card 355
    Software Upgrade
    Microsoft Works 8.5
    Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
    NoteBook Screen
    17 inch WXGA+ TrueLife Glossy Notebook Screen
    Hardware Upgrade
    No Camera
    6 Cell Primary Battery
    90W AC Adapter
    Network Interface Card
    Dell 1505 Wireless-N

    Rob - thanks for taking a stab at this.
    I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
    And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
    Here's the update from my dealings with DEll today...
    Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
    Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
    Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
    I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
    The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
    I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
    They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
    The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
    The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
    Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
    And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
    Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
    Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
    Not sure what my next move is.

  • How do I install the FM10 licensing fix when Adobe Update Installer won't run?

    Adobe Update Installer won't run so can't install FM10 licensing fix
    This question is Not Answered.(Mark as assumed answered)
    Aug 9, 2013 12:09 PM
           Tags (edit): none (add)  
    Because FM10 began crashing with "fatal" errors whenever I tried to generate a TOC for a small (65 page) book, I researched workarounds and none of them worked. Now that I have delivered a crippled deliverable via Acrobat manipulations, I would like to fix FM. I uninstalled it and reinstalled it, got some updates, and then received the "licensing fix" error that popped up in January. I'm wondering why this fix was included not in the updates. That said, the licensing fix package, first, would not unzip so I downloaded it again. I unzipped it but I got a message that Adobe Updater Installer could not run and after several clicks I found that file. I reinstalled Adoble Update Installer but it still does not run.
    I am running Windows XP and have TCS 3.5.I uninstalled FM and RH but not Acrobat, Captivate, or Photoshop.
    So, now what? Listen to my supervisor who says never use FM again?
    P.S. Why do I have to enter a title for my question and then do it again when this page opens??

    Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

  • Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)

    I have a wonderful action that was written to work in PSE 3/4/6.  It won't run in PSE 7/8/9.  After fooling around for a while, I think I understand why.  Adobe changed the way Adjustment Layers are handled.  In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box.  That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
    Here a sample of some of the action steps that won't work correctly:
    Make adjustment layer
    Using: adjustment layer
    Type: levels
    Set Selection
    To: none
    Set current layer
    To: layer
    Name:  “Adjustment 1”
    Set current layer
    To: layer
    Mode: luminosity
    Stop
    Message:  “Move gray slider left”
    With Continue
    Set current adjustment layer
    To: levels
    In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
    In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
    The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
    Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?

    Adding a new levels adjustment layer on top of the Midtone contrast layer
    should work, just use a clipping mask to restrict the adjustments to the
    areas of the levels adjustment layer below. The histogram will be different, but
    actually testing the action is really the only way to know if that makes any difference.
    Replacing the levels adjustment layer is another option, though it requires a few more steps.
    The following assumes when the action gets to this point,
    the Midtone contrast adjustment layer is the active (selected) layer.
    To record this part of the action:
    1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
        down to the Create new channel icon at the bottom of the channels panel)
    2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
        This loads the selection of that channel.
    3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
       of the channels panel.
    4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
    5. Go to Layer>New Adjustment Layer>Levels
        This creates a new levels adjustment layer using the selection loaded from
        the duplicated channel and opens the levels dialog.
    To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
    and the same is true for the red, green and blue channels.
    With layer masks, elements doesn't seem to want to load them as selections in actions,
    so that's the reason for the action steps above.
    MTSTUNER

  • CS2 won't run

    CS2 won't run, says activation code no longer usable. Been running win7 on this system 3 years. Adobe says it won't activate in win7. Well, it did, and ran just fine. what's up?

    I assume when you say "Adobe says it won't activate in win7" that you talked to customer support....
    A drive change could trigger the need for reactivation.  Did you tell them that you're running from a mirrored drive?
    It sounds to me that they're being aggressive about trying to get you to upgrade when they should still be supporting you with active maintenance of their activation database.
    But unfortunately if you can't get them to adjust their database you're out of luck.
    -Noel

  • I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I ended up putting it in DFU mode.  It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
    Itunes still didn't recognize the device for whatever reason.
    So I used redsn0w.  I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
    Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

  • How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

    The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
    Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
    Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
    HELP!

    Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
    Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
    I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

Maybe you are looking for