MX7 Updater report error

I have used the MX 7.01 updater to the version of
7,0,2,137072 . Since I have run this updater I not get a when I run
a report, error as follows:
Measage:Report compilation error. Error at (135, 20: null
Type: coldfusion.util.RuntimeWrapper
I have rolled back on the production server, can anyone help
please? I assume the new updater would contain all the lastest
patch updates. Im not sure what to do now
Many Thanks
Wayne

quote:
Originally posted by:
edwelch4
I think that I found a solution. There is an update to the
report builder to 7.0.2. I installed the updated version of report
builder and then made a small change to the report and then saved
and now the report works. No more error.
Here is the link..
http://www.adobe.com/support/coldfusion/downloads.html#cfdevtools
The build number of the updated CF report builder is 142150.
Give it a try...
That was the first thing I tried... it also didn't work :(
Anybody care to cough up 500 bucks for a support ticket? I
can't convince people here to do it :(

Similar Messages

Updatable report error: "Error in mru internal routine: ORA-20001"

Hi all,
i have a updatable report with a Multi Row Update process.
The report has 6 display column and 1 Select List column.
When i try to save any changes, the application shows this error:
"Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "D8B5C89AA33C8434C26DCF9A6ED939E4", item checksum = "39FB99A42FF86E64FD66D1F3C142C5F6"., ... "
This application allows many user's connections at the same time.
What can i do?
Thanks.

Hi,
Obviously, without these tables I can not check this, but I would suggest something like:
SELECT
'<img title="Click to enlarge" onclick="javascript:showImage(this);" src="#OWNER#.DISPLAY_IMAGE?inID=' || NVL(IMAGE_ID, 0) || '" height="30" width="30" />' FOTO, -- DISPLAYED
CA."E_UNI_OPER_K_UNITA_OPER", -- HIDDEN
CA."E_OPERATOR_K_OPERATORE", -- HIDDEN
CA."O_CARICO_UO", -- HIDDEN
CA."O_TIMESTAMP_RSS", -- HIDDEN
CA.K_MATRICOLA, -- HIDDEN
CA.K_MATRICOLA K_MATRICOLA_DISPLAY, -- PRIMARY KEY, -- DISPLAYED
CA.K_SERIAL_NUMBER, -- HIDDEN
CA.K_SERIAL_NUMBER K_SERIAL_NUMBER_DISPLAY, -- DISPLAYED
CA.E_UNI_OPER_K_UNITA_OPER_***, -- HIDDEN
(SELECT TMA.N_MODELLO_ASSET FROM TIPO_MODELLO_ASSET TMA WHERE TMA.K_MODELLO_ASSET = CA.E_TMODASS_K_MODELLO_ASSET) N_MODELLO_ASSET, -- DISPLAYED
CA.E_TCATASS_K_CATEGORIA_***, -- HIDDEN
(SELECT TCA.N_CATEGORIA_ASSET FROM TIPO_CATEGORIA_ASSET TCA, A_IMAGES AI WHERE TCA.K_CATEGORIA_ASSET = CA.E_TCATASS_K_CATEGORIA_*** AND TCA.K_CATEGORIA_ASSET = AI.E_TCATASS_K_CATEGORIA_***) N_CATEGORIA_ASSET, -- DISPLAYED
CA.D_RIFERIMENTO_CERTIF, -- HIDDEN
CA.D_RIFERIMENTO_CERTIF D_RIFERIMENTO_CERTIF_DISPLAY, -- DISPLAYED
CA.TIPO_CONFERMA_CERTIF, -- SELECT LIST
CA.D_INSERIMENTO_CERTIF, -- HIDDEN
CA.D_FINE_VALIDITA, -- HIDDEN
CA.E_TMODASS_K_MODELLO_ASSET, -- HIDDEN
CA.E_PG_SIGLA_K_PARTIZIONE -- HIDDEN
FROM CERTIFICAZIONE_ASSET CA
WHERE CA.D_RIFERIMENTO_CERTIF IS NOT NULL
AND CA.TIPO_CONFERMA_CERTIF IS NULL
AND CA.D_FINE_VALIDITA IS NULL
AND E_UNI_OPER_K_UNITA_OPER_*** = :G_UO
Note that you can not have a tabular form over multiple tables (if you had to do that, you should use a SQL view plus an INSTEAD OF trigger) - but, as you are only displaying data from the joined tables, you can use inline SELECT statements to retrieve the related data. All other columns should be either editable by the user or hidden - any hidden columns can also have a displayed version as well, so any DISPLAYED items above also have a HIDDEN instance as well.
Andy

SM12 "Diagnosis in update" reports "Error discovered"

Diagnosis in update reports the following in SM12:
09.10.2007 Dynamic List Display 1
Diagnosis in Update
Line
Step 1: Owner Keys / Dialog / Update
ok.
ENQKEY = 20071009203712187000000300*********.......................
ENQKVB = 20071009203712187000010300*********.......................
Step 2: Set Lock for Update
ENQKEY = 20071009203712187000010300*********.......................
ENQKVB = 20071009203712187000010300*********.......................
Object: ENQ_TEST
Granule: ENQ_TEST E ENQ_TEST ENQ_TEST ENQ_TEST ENQ_TEST
ok.
Step 3: Update Call, Pass On Lock
ok.
Step 4: Lock Passed On
ok.
Step 5: Wait for Update to End, Max.20 seconds
Update not completed after (seconds): 20
Locks not deleted
Step 6: Read Locks Messages from the Update
Step 7: Delete Locks
Error discovered ******************
Messages Received from Update
-No- -Time- -
Message Text -
ENQ_TEST ENQ_TEST ENQ_TEST ENQ_TEST
It is not possible for functional people to create/change any entry in table LFA1
I am able to see 3 update work process in SM50 out of which 2 shows to be running
but with a time entry as 496297 and 494093
Searching in SDN did not yielded much help.
Can anyone please help?
Regards,

Ruchit,
I am not able to interpret the information it is showing for the two processess.
But, it says that there is a sequential read going on, on table KOCLU and a report named SAPLV45U is running.
But there are no user except myself and one more in the system.
SM13 shows 10 update records. 2 have status enqueues deleted(shown in red).
Rest others show status initial(shown in green)
Please guide as to how interpret information about the work process if needed.
Regards,

Error in updatable report

Hi All,
I need to add validation to updatable report.
As the report doesnot have items, I am using collection package.
eg:
select
htmldb_item.select_list_from_query(9,em_agent,'select em_agent, em_agent from IBM_MANAGED_DATABASES') em_agent,
htmldb_item.select_list_from_query(10,em_in_scope,'select em_in_scope, em_in_scope from IBM_MANAGED_DATABASES') em_in_scope
from "#OWNER#"."IBM_MANAGED_DATABASES" d, ibm_servers s
where d.server = s.server
When I run the page, I am getting an error
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
The same thing I implemented on emp ,dept tables in apex training instance and it works.
Can anyone please address where I am going wrong in actual implementation.
Thanks.

Sarvani,
I am sorry I did not get you "or change your handle to show it".I mean go to the Control Panel link (top right of on my page) and make your handle something like "Sarvani". While you are there click "Show" for your name and put at least your first name there. Messages are a lot easier to track when they are associated with human-sounding names.
Is that you are pointing to the way I explained the problem.I don't know what you mean by that.
My report has 1045 columns...1045 rows
and as you suggested I used apex_item.popupkey_from_query...I first suggested that you try select_list_from_query_xl. Did you try that? I don't think it will help because you are returning so many rows but you could try it.
Then you tried the popupkey_from_query. I am not clear if the page doesn't run and gives a 404 or if the page runs and the popup page gets a 404.
When you put the test case on apex.oracle.com, we will be debugging the popup item but it will be much easier if you can first check your Apache logs on your system and get the error message.
Scott

Numeric or value error in updatable report

report error:
ORA-06502: PL/SQL: numeric or value error
This is the error I get when I run my updatable report.
Here the query:
select
IDS,
CPY_IDS,
PU_IDS,
START_DT,
END_DT,
IDS AUDIT_BUT,
IDS EDIT_BUT,
CREATED_BY,
CREATION_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_DATE
from GOM_PROD_UNIT_COMPANIES
where CPY_IDS = :P47_IDS
for column cpy_ids i use a select list (named lov) with next query:
select nm d, ids r
from gom_prod_units
order by 1;
When I run the page the error is shown.
When I use display as text (based on lov, does not save state), it does work...
The application was exported from dev to test, and in dev it did work without any problem...

This is the output in toad:
select
a.IDS,
a.CPY_IDS,
a.PU_IDS,
a.START_DT,
a.END_DT,
a.IDS AUDIT_BUT,
a.IDS EDIT_BUT,
a.CREATED_BY,
a.CREATION_DATE,
a.LAST_UPDATED_BY,
a.LAST_UPDATE_DATE
from GOM_PROD_UNIT_COMPANIES a
where a.CPY_IDS = 4;
IDS;CPY_IDS;PU_IDS;START_DT;END_DT;AUDIT_BUT;EDIT_BUT;CREATED_BY;CREATION_DATE;LAST_UPDATED_BY;LAST_UPDATE_DATE
163;4;16;9/29/2004;;163;163;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:50 PM
166;4;537;10/15/2004;;166;166;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:50 PM
340;4;13;10/13/2008;;340;340;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM
372;4;14;10/13/2008;;372;372;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM
414;4;15;10/13/2008;;414;414;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM
445;4;12;10/15/2007;;445;445;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM
446;4;8;10/15/2007;;446;446;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM
482;4;9;5/21/2003;;482;482;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM
493;4;7;10/13/2008;;493;493;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM
498;4;11;10/13/2008;;498;498;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM
499;4;10;10/13/2008;;499;499;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM
549;4;485;5/21/2003;;549;549;GOM3;10/13/2008 11:00:37 AM;GOM3;11/3/2008 4:51:51 PM

RMMR1MRS-When run in background cause update failure errors looking

hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.

Have you found a solution already? If so, please, share it with the community and close this thread.

Opening updated report fails because record selection filter is invalid

I am trying to update a report stored in BOE XI. The report has been modified and the main part of the report has been moved to a subreport.   I first replace the .rpt file with the updated report. Then I attempt to open the report using the code below it, but it throws an error and complains about an unknown field being mentioned in the filter
oReportAppFactory = (IReportAppFactory) es.getService("", "RASReportService");
oReportClientDocument = oReportAppFactory.openDocument((IInfoObject) oReport, 0, Locale.ENGLISH);
ERROR MESSAGE: Cannot open report document. --- This field name is not known.
Details: errorKind
Error in File /opt/bobje/bobje/tmp/{F395AC11-26FC-11DF-A70C-00065B8B38B5}.rpt:
Error in formula <Record Selection>.
'// Filter on desired date range
This field name is not known.
Details: errorKind
If I manually delete the record selection filter in CMC before upgrading the report all works fine. So, do I need to remove the filter before attempting to open the report or is there another step I'm missing to refresh the report using the newly updated .rpt file?
thanks,
Brett

The relevant part of the stacktrace is below.
java.lang.UnsupportedOperationException
        at com.crystaldecisions.sdk.properties.internal.AbstractSDKList.remove(Unknown Source)
        at java.util.AbstractList$Itr.remove(AbstractList.java:436)
        at com.crystaldecisions.sdk.plugin.desktop.common.internal.i.do(Unknown Source)
        at com.crystaldecisions.sdk.plugin.desktop.report.internal.e.f(Unknown Source)
        at com.crystaldecisions.sdk.plugin.desktop.report.internal.e.f(Unknown Source)
        at com.crystaldecisions.sdk.plugin.desktop.report.internal.e.refreshProperties(Unknown Source)
The context is the same as the original post...
An existing report is being updated. The original report uses a single view and has a record selection filter. The updated report uses the same view in a subreport, and the main report has no record selection filter.
.rpt file is updated using IReport.replaceUnique(int, File).
Changes are committed to IInfoStore -> iStore.commit(IReport)
Refresh options are enabled
IReportRefreshOptions refreshOptions = oReport.getReportRefreshOptions();
refreshOptions.removeOption(IReportRefreshOptions.CeRefreshOption.TITLE);
refreshOptions.removeOption(IReportRefreshOptions.CeRefreshOption.DESCRIPTION);
refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.PROMPT_VALUES);
refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.RECORD_SELECTION_FORMULA);
refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.GROUP_SELECTION_FORMULA);
refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.PRINTER_OPTIONS);
refreshOptions.addOption(IReportRefreshOptions.CeRefreshOption.DEFAULT_LOGON_INFO_VALUES);
Properties are then refreshed using IReport.refreshProperties() which throws the UnsupportedOperationException
changes are again committed.
thanks,
Brett

Problems panel no longer reporting errors until I run

I've been using Flash Builder and just the other day it stopped reporting errors in the problem panel for any projects until I try to run them.. saving is no longer enough. I know this isn't an issue of external files because I'm in class and my neighbours have the same code and it's updating the problems panel on save for them!
Anything I can try to get it back to normal short of reinstalling?

Can you check if "Build Automatically" is checked in the Project menu?

Software Update reports bundled apps cannot be updated because they are associated with a different Apple ID

New MacBook Pro 15" Retina arrived today.
Software Update reports that updates are available for iPhoto and iMovie, bundled with purchase.
However, when UPDATE is selected, the error message
"You have updates available for other accounts.
To update this application, sign in to the account you used to purchase it."
I am the initial user and have no other account.

Any chance you had a different Apple ID with an earlier Mac and then it got migrated to your new MBP?
When you registered new MBP did you use the same Apple ID?

Potential Windows Update database error detected 0x80070490

This is the response I get when I run the Windows update troubleshooter from the Windows 8.1 Action Center. If I click next it reports the errors have been fixed. However if I run it again it reports exactly the same errors.
After searching the Internet I have found that several users have reported having this issue. As result of the aforementioned search I have tried the following:
1) Run the Fixit tool for Windows 8.1 located at:
http://support.microsoft.com/kb/971058/en-us.
2) Run the System Update Readiness commands: DISM.exe /Online /Cleanup-image /Scanhealth and DISM.exe /Online /Cleanup-image /Restorehealth located at:
http://support.microsoft.com/kb/947821/en-us.
3) Saved contents of C:\Windows\System32\catroot2 to a temp folder and then deleted contents of C:\Windows\System32\catroot2.
4)Renamed C:\Windows\SoftwareDistribution to C:\Windows\SoftwareDistribution.old
5) Restarted Windows 8.1.
6) Verified that C:\Windows\System32\catroot2 and that C:Windows\SoftwareDistribution folders had been rebuilt.
7) I then ran the Windows update troubleshooter from the Window 8.1 Action Center again and got the same response as listed above. The errors still exist and are not fixed.
8) Finally, I downloaded Windows 8.1 Enterprise Evaluation and I did a completely new clean install of Windows 8.1 and without installing anything else (no updates, no software, no antivirus) the above errors appeared within minutes after connecting
to the internet. I checked using the Windows update troubleshooter several times before connecting to the Internet and each time no problems were found, but shortly after I connected the above errors are shown to exists.
Any suggestions that will help fix this issue will be of great help.

Did anyone ever find an actual fix for this problem? I have a very similar problem. I have gone through the same steps for fixing my issues with getting a message of problems found every time I run the Windows Update troubleshooter. It
continually finds what it says are Potential Windows Update Database error detected 0x800700D and says they are fixed, along with another message saying Windows Update components must be repaired and it says they are fixed as well. However, each time
I run the troubleshooter it finds the same issues. I have no problems running Windows Update under Windows 8.1 and them all installing without issue, yet I can't download or update ANY apps within the MS store and like the problem above, when it looks
for my apps it says it's having problems finding them and to try later. If I try to download even a free app, I get an error message that something happened and your purchase can't be completed. Error code: 0x80096004.
I have dug through everything I can find on this error message and tried changing my sign in on my laptop to a local account, created a new MS account to access the store and continue to get the same error message. I have tried it with my Kaspersky
Internet Security 2015 turned completely off. I've also ran SFC scannow and there are no errors and have ran DISM which found a problem but says it was fixed. After running it again, there were no errors. I have no other problems with anything
else (that I know of on my machine). It is an Asus Q400A and came with Windows 8.0. I ran all the updates and then upgraded to 8.1 through the MS store without issue. I have installed all updates since upgrading to 8.1 and have absolutely
no problem running ANY updates, but can't seem to access the store no matter what I try.
If anyone has found a solution to this I'd appreciate your input. Hard to believe MS would put out a product that has such a basic problem that has affected so many users and can't seem to come up with some resolution that doesn't require registry
editing, running commands from elevated command prompts, and a CS degree to resolve--there are soooo many issues online regarding this kind of error and others related to running SFC and DISM...most ending up in their ultimate default answer....renew or reinstall
Windows and all the updates....which still doesn't resolve the problem for many! I've always been a PC guy, but I'm starting to like the MacBook Pro I picked for work related reasons with great hesitation. I've wasted more time chasing this issue
down than I all the time I've spent actually using the Mac without even a hitch!
Thx in advance for any feedback....please no MAC blasting....at this point, it would be not well received!!

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Reporting Error while Restart to apply Recent Changes in OBIEE 11g in EM

Hi Friends,
I tried to open my rpd in online mode in OBIEE 11g, For that i went into EM for getting my rpd updated...
So after all doing changes, I need to restart for applying changes, so I restarted the system components
But only 80% of it started, remaining 20% is showing error and these are the error details
"Restart failed with 2 errors: problems reported by coreapplication_obis1, coreapplication
see detailed logs for more information"..
The above is the error message that i got..
The below are the log messages that reported error
Message type: Error
Message ID : -
Message : SEVERE:Element type:BI_instance,element_id:coreapplication,operation result:failed_to_start, detail Message-Error in starting one or more components of Bi instance; please check the server log files for detailed information..
Target : biadmin services(11.1.1)(Admin server)
Target type : application deployment
Log files : Admin server_diagnostic.log
Message type: Error
Message ID : -
Message : SEVERE:element type:process, element Id: coreapplication_obis1, operation result: failed_to_start, detail message- operation failed: start; oracle instance: instance4; component; coreapplication_obis1;msg: 0 of 1 processes started..
Target : biadmin services(11.1.1)(Admin server)
Target type : application deployment
Log files : Admin server_diagnostic.log
Message type : Error
Message ID : EM-02694
Message : Supplementary information regarding operation: BI_instance:coreapplication; failed_to_start; error in starting one or more components of BI instance; please check server log files for detailed information..
Target : em(Admin server)
Target type : application deployment
Log files : emoms.log
Message type : Error
Message ID : EM-02694
Message : Supplementary information regarding operation: PROCESS:coreapplication_obis1; failed_to_start; operation failed: start; oracle instance:instance4;component:coreapplication_obis1;msg 0 of 1 processes started..
Target : em(Admin server)
Target type : application deployment
Log files : emoms.log
how to solve these errors, because of this i couldn't able to open my repository in online mode as well as cannot able to update my .rpd file in presentation services in obiee 11g..
I couldn't able to understand the error that is pointing to me....
Help me friends..........
Regards,
Harry...

It's myself harry and i solved this problem, since this problem occurred for me as i tried to update my repository.rpd file for more than 5 times because of the error that it reported to me in my previous post...
How i solved this error means, i deleted all the other .rpd files(out of 5 i deleted 4) and i made some changes in my rpd file in the administration tool and after that i tried to update my rpd in EM..
Once it updated, then i gave restart to apply recent changes, after that my system components tempt to work as of 100%...
Anyway friends thanks for your views.....
Cheers
Harry...
Edited by: HariPrasad on Nov 13, 2010 2:59 AM

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

Carl's Auto Updating Report example with Apex 3.0

Hi,
I'm try to develop a page very similar to Carls' "Auto Updating Report" page and been very new to Apex I find it very hard to work out all the things I need to do from the example pages.
Is there anywhere I can download a sample application so I can explore the code through APEX to see how everything works and fits together.
Any help would be most appreciated.
Anthony

Carl,
Thanks I have it working.
Just one more question is it possible to have two reports on same page to auto update?
If I simply add another html_PPR_Report_Page with the second report_id I get an Error : "gNode is null or not an object". using IE.
function mon_Refresh()
setTimeout("mon_Refresh()",5000);
html_PPR_Report_Page (null,'R1736701112358007',$x('r_R1736701112358007').getAttribute('htmldb:href'))
works fine but
function mon_Refresh()
setTimeout("mon_Refresh()",5000);
html_PPR_Report_Page (null,'R1736701112358007',$x('r_R1736701112358007').getAttribute('htmldb:href'))
html_PPR_Report_Page (null,'R1738006943370690',$x('r_R1738006943370690').getAttribute('htmldb:href'))
raises an error.
Anthony

Report error: ORA-01403: no data found.

Hi,
I was getting a following error and not able to figure it out.
Here what I have:
I have a page where I have 3 regions and out of them, there are 2 Html conditional regions
and one SQL updatable report. Also, I have a validation to validate a field on the tabular form
based on one field on the HTML region. The validation works fine but it also throws following error :
report error: ORA-01403: no data found.
Code:
Declare
v_office_id number;
Begin
SELECT count(id) into v_office_id from dar_asd.asd_office;
if (:P299_ROLE_TYPE_ID = 1 and apex_application.g_f30.COUNT = v_office_id ) or
(:P299_ROLE_TYPE_ID = 2 and (apex_application.g_f30.COUNT < v_office_id
and apex_application.g_f30.COUNT >= 1) ) then
return null;
else
RETURN 'Error: '||'Not a valid office selection.';
end if;
EXCEPTION
WHEN NO_DATA_FOUND THEN
RETURN 'Error: '||SQLERRM;
end;
Thanks.

Marc,
Thanks for the reply.
It is derived columns i.e. Use Query-Specific Column Names and Validate Query. The select statement returned by the stored procedure function will allways have all list of columns in select list. But the report displays allways some fixed number of columns in the secod region and remaining will be dependent on the check boxes and lov items selected in the first region. For e.g. if the select has 20 columns. Out of this, let's say 8 will allways displayed and remaining 12 will be displayed depending on the check box and lov items defined for them in the first region. I mean if 3 check boxes are checked and if the user selected some value from lov for the corresponding check box items, then the report will display 8+3 = total 11 colums. And the lov values selected will be used in the where condition of the SQL.
How can I go to the report attributes? I can go to page definition, but I am not finding report attributes here. Please let me know...
Thanks,
Srini

MX7 Updater report error

Similar Messages

Maybe you are looking for