MXE3500 Windows Server and Sharing Permissions
I currently have an MXE3500 running and have added the virtualized windows server to our Active Directory domain. I can go to go to computer management --> local users and groups --> administrators group and add users from our Active Directory domain (after logging in with an account within that domain).
If I modify a share, and give the administrators group full control of that share, plus modify the NTFS permissions to allow full control, I am unable to connect via UNC from my personal computer to that share on the MXE3500. Has anybody been able to do one of the following:
Successfully, apply permissions from a windows domain other then "everyone" to folders that exist on the MXE3500 file system
Run the windows instance as a user within my active directory domain, so that I can map a drive to a UNC share on my active directory domain
Any other way of connecting to a fileshare where I can apply permissions to a select group of people, and then make a folder watch on that fileshare.
thanks for any help you can provide.
Thanks for the reply. I noticed there are quite a few issues with trying to UNC map to any share outside of the local MXE3500. I'm also seeing some issues with FTP watches on an EMC NAS, that has been FTP enabled. The problem I'm seeing now is that the watch will only work, if the watch is at the root level. If I add a file path, its accepted as valid when I save the directory watch, but looking at the fa.log its appending the last directory on twice.
So if my watch is looking at FTP Directory Path of: lifelink
The fa.log shows: .../lifelink/lifelink/
the word lifelink is displayed twice, causing an error, stating: "Error checking file size delay"
thanks,
Dave
Similar Messages
-
At UC platform i can see some applications are installed on Windows server and some directly to VMWare. Pls explain?
Pretty much all newer versions of UC applications have started supporting virtualization so they can be installed on the VMware.
Have a look at dockwiki for virtualization supported apps:
http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Supported_Applications
Some applications like CUCM version 4 were windows based previously but going ahead with version 5, 6 onwards the OS has been changed to Linux Operating system.
Let me know if you need any more information.
-Terry -
Applet works in Windows Server and not in Unix server
My friends,
I have a signed applet working fine in a windows server and a client with win98. When a put this applet in a AIX/Unix server in same win98 client did not work.
The applet call a program in the client by Runtime.exec and a give "error=0".
Someone can help me ?Show the code with the runtimeexec line.
Windows file system is different than UNix.
Windows eg. Runtime.exec (c:/fileToRun.exe)
*ix eg. Runtime.exec (fileToRun) -
Java class to connect Windows server and excecuting bat file
Hi All,
Could some please provide or let me know how to connect windows server and executing bat file in windows box.
All i have in hand to connect is Host name,Username and Password.
Basically i am SOA guys and facing difficult in building class to do.
I want to use Java code in my integration project in order to achieve the above case.
I am using Linux OS. And i want to run Java code in Linux Box and to connect to Windows server
Thanks in advanace
Regards,
Tarak.
Edited by: Tarak on Aug 8, 2012 4:08 PM
Edited by: Tarak on Aug 11, 2012 9:08 PMI'm afraid few if any of us are going to know anything more about connecting to Windows Server than you do. All I can suggest is to check if its client interface is publicly documented and try reverse engineering it from that.
-
When installing CS3 Design Premium it instals Version Cue server and shared components, but I get the message "Errors: 6 component (s)" and dose not install, Photoshop, Flash, Illustrator, Indesign or Creative Suite Premium
Thank you Bturko in the future only migrate/copy/transfer your documents and settings. Adobe applications especially are not designed to be transferred from one computer to another. It is possible to recover however. I would recommend the following steps:
Run the uninstaller located in Applications/Utilities/Adobe Installers
Run the CC Cleaner Tool to ensure complete removal - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files they can be downloaded at Download CS3 products.
Run the installer and reinstall Creative Suite 3. -
Pls Suggest server names for Reporting Server and Shared Services
Hi,
Can any one Pls Suggest server names for Reporting Server and Shared Services
Thanks in advance.Report server name: OrclRpt
Shared Services: OrclSS -
Using Shared Review via Network Folder on Windows server and PC and Mac users commenting
We are having initiation and connection problems on the Macs (running OS 10.6.4 Snow Leopard) with Shared Reviews (from Acrobat 9) that are stored on a Windows 2008 Server connecting via SMB. I would be very interested to hear from anyone who is successfully:
1) Initiating Shared Reviews from a Macintosh via "Automatically collect comments on my own internal server" and navigating to a folder (with full read/write permissions for all) on a Windows server. We cannot get Acrobat (via the automated SR set-up wizard) to verify the network folder location on the Macs so that a Mac user can initiate a Shared Review. On Windows (using Parallels or logging in to a PC directly), the same users have no problem initiating and accessing Shared Reviews.
2) Accessing Shared Reviews on a network folder (set up on a Windows 2008 server) via a Mac running OSX 10.6.4 and Acrobat 9. All users have read/write access to the folder and can navigate to it via the server. They can save documents to the network folder and open other documents there as well. When they open a Shared Review-enabled PDF for commenting, they get the error message that Acrobat cannot connect to the server. Retry results in the same error message.
We use Shared Reviews extensively and have no problems with PC users accessing the files and Mac users accessing them via Windows (Parallels or on a PC). This is very frustrating so I would really appreciate any ideas, especially if anyone is actually doing Shared Reviews this way.
Thanks.Unfortunately, this is NOT fixed based on the testing I have done.
1) I am still unable to connect to the network folder on a Windows server from the Mac to initiate a Shared Review In Acrobat version 9.4.6. Same error message as previous Unable to locate server. See screenshot:
2) One of the Mac users (also upgraded to Acrobat 9.4.6) who was invited to participate in a Shared Review (initiated using Parallels/Windows) was initially able to open the file and Publish comments. However, after she did and closed the file, she was unable to reopen the same file, connect to the server and add comments. And no other Mac user could access the file after she added her first comments. We all got the error message "Unable to connect etc" See screenshot.
3) I opened the same file in Parallels/Windows with no problem. However, the Mac user's comments were not there. I could add comments and publish in Windows.
4) When I tried to access the Tracker from my Mac (review was initiated via Parallels), I got the error message File not Found when I tried to access the test review via my Mac (see screenshot).
Could you give me more information about the fix? I would also be happy to talk to you or send more details if that would help.
Our set up has not changed from the original information I sent (there may have been some Mac updates -- we are all on OS 10.6.8 but still Snow Leopard). Server has not changed. -
Windows Server 2003 Sharing and Security Problem
Hello all,
I am having a problem with setting permissions and sharing folder "A" within our domain. As a member of Domain Admins, I am unable to open the contents of any folder within folder A's hierarchy. Domain Admins has full control
at the top level of the folder structure, so I am not sure why I cannot open any of the subfolders. I have even added my user id directly to the top folder with full permissions and I am still not able to open any of the sub folders. The message
I get is "Access is denied". I have even tried giving Everyone full control and I can still not open any lower level folders. Not sure how this happened or how to fix it. I'm hoping someone can point me in the right direction.
Thanks very much,
Linda
Thanks, LindaJust because it is set at the top level doesnt guarantee that it is fully inherited to all the files and folders below it. You have two things to consider
1) It's possible specific folders or files below have been set to not inherit permissions. So no change at a higher level will change them. You can see if this is the case.
2) When you add yourself to the top folder, did you got into advanced mode and ensure that it was set to This Folder, Files and Sub Folders?
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years. -
I am unable to print to a Canon iR-Adv C5045 from a MacBook Pro (OS X 10.9.4) that is connected to Windows NT computer and shared on the company network. I am connected to the network by ethernet.
I was able to add the printer manually by going to Advanced, Windows printer via spoolss, smb://computer name/printer name and used the Canon iR-ADV C5045/5051 driver.
When I print it appears to be printing but nothing comes out. I checked the completed jobs from the Print Queue and the job is listed. Checked the print log on the printer and it isn't listed. Is there a different driver I should be using for this configuration?You may not have a choice as to what driver you can use. If the ADV C5045 only has the default UFR2 printer kit, then you will have to use the UFR2 driver - which is what you are using now. If you can access the copier, press the Counter Check button on the control panel. Then on the display you will see an entry labelled Check Device Configuration. Select this and scroll down through the pages. You are looking for an entry called PS. If you see it then the Canon does have the optional Postscript printer kit enabled and this will let you use an alternate driver. One suggestion would be to create the printer again using the same setting that you have done already but this time select the Generic Postscript driver included with the OS rather than use the Canon driver. This will help to determine if the driver is the cause.
If there is no PS option you will have to use the UFR2 driver and this could be the problem, as the Canon drivers don't always work well on a Mac via a Windows share. As a test, are you able to create a print queue directly to the Canon rather than via the Windows share? If you can, then this will let you check if the driver currently installed will work, as there can be settings on the copier that can block/stop you from printing. Assuming that you can print to the Canon with a direct connection from the Mac, then we can work on getting the printing via the shared queue. But if it doesn't print directly from the Mac, then it confirms that it may not be the server and more to do with the copier. -
Service Bus 1.1 for Windows Server and AMQP connetion problems
I am having an issue making AMQP connection to Service Bus on my local Network. Service Bus 1.1 has been implemented on a development box Windows Server 2012 using SQL Express. The Windows Firewall is wide open for testing. The SB certificates
have been copied down to the client machine.
The connection to the topic using other than the AMQP protocol works just fine but as soon as the transport is changed to AMQP, the following is received
Error 10054 "An existing connection was forcibly closed by the remote host."
I have tried to change the connection string ports to reflect the AMQP settings to no avail.
The same code works in Azure using AMQP, but the STSEndpoint is not present for that code.
The STSEndpoint comes from the connection sting generated by the WS SB Management Portal.
I am sure that I missed a step or that if a certificate is added somewhere this should work.
The AMQP is an important item as if it is not made to work, a different messaging platform will have to be implemented at quite a large cost ie Red H4T. Using Azure outright is not an option either.
Any assistance would be appreciated.I think I found the problem, and it is in the connection string. you have probably just added the ;TransportMode=Amqp to the connection string in order to change the connection type to AMQP. However, you also need to change the runtime port to 5671.
<add key="Microsoft.ServiceBus.ConnectionString" value="Endpoint=sb://servicebus...net/TestNamespace;StsEndpoint=https://servicebus...net:9355/TestNamespace;RuntimePort=5671;ManagementPort=9355;SharedAccessKeyName=RootManageSharedAccessKey;SharedAccessKey=XXXXX/E=;TransportType=Amqp" />
See also:
http://stackoverflow.com/questions/27986958/using-aqmp-with-on-prem-windows-service-bus -
Hi,
How do you link windows server 2012 so that it pulls all the user information from a mac server running the server version of mavericks. I want windows users to be able to login on their computer but have the windows server pull the user information from the
mac server's open directory, that is the primary directory and for password updates etc to be synchronised in either direction.
Thanks for your helpHi,
If your Windows PC has an Ethernet port, you can connect your PC and Mac using an Ethernet cable.
For more and detail information, please refer to:
http://support.apple.com/kb/PH7116
Or you could ask for the Mac support.
Regards.
Vivian Wang -
What standards are used by Microsoft for developing Windows Server and other products
Where can I obtain or solicit information regarding Microsoft software development process compliance with national/international standards? I need to create regulatory documentation, and knowing which ISO, IEC, ANSI, etc. standards that Microsoft uses to
develop specific applications (including but not limited to Windows Server 2012 Standard) would be most useful.
My efforts to obtain this information (live chat, calls to different support numbers and tweeting) have been fruitless.
Any help would be much appreciated.As to the 'broken' link. The editor in the forums has a nasty habit. If one concludes a sentence with an URL and puts a period after the URL to designate the end of the sentence, the forum editor includes the period as part of the URL.
Delete the period and the link will work.
What do you mean by 'standards' for software development? If you mean something like ISO/IEC 12207, I think you are going to have to search Microsoft web sites and then see if you can strike up a conversation with authors of articles you find.
I am not aware of any specific publication of conformance to such standards within Microsoft. Even though I worked for them for 12 years in a non-engineering role, I tended to take an interest in this sort of thing based on interests developed in previous
roles.
Here is a link (http://www.microsoft.com/security/sdl/resources/publications.aspx) and here (http://www.microsoft.com/security/sdl/default.aspx) that
covers their Secure Development Lifecycle. To a great extent, Microsoft 'wrote the book' on how to do secure development (http://www.barnesandnoble.com/w/the-security-development-lifecycle-michael-howard/1110830298?ean=9780735622142).
It may appear dated, as it was published about eight years ago, but it became the textbook for some college courses on secure development.
. : | : . : | : . tim -
Windows Server and Internet Printing - Printer Not Found
Having looked at every thread I can find on the subject of IPP, I have finally come to post my first cry for help.
My system is:
Server 2008 R2 Enterprise
I have the following roles and services installed.
Print and Document Services
Print Server
LPD Service
Internet Printing
Web Server (IIS)
Web Server Services, most all but Custom logging and ODBC logging
Management Tools, all
If I visit http://<myip>/printers , I get a list of my printers.
Clicking on one of them I get the status page for that printer with option to connect.
Clicking connect I get "Printer Installation Failed -- The printer name is invalid." I have searched for an answer to this problem for three days and nobody seems to have the exact same problem as me.
Now, when I look at the detailed error page here:
http://localhost/printers/SAVIN2NDFLOOR/.printer
I get a 404 error.
Requested URL: http://localhost:80/printers/SAVIN2NDFLOOR/.printer
Physical Path: C:\Windows\web\printers\SAVIN2NDFLOOR\.printer
That physical path does not actually exist. C:\Windows\web\printers\ is all there but there are no printer folders in this directory. Are there supposed to be? What am I missing?
All help will be greatly appreciated.Hi,
Thanks for the post.
As we know, when the user connects to any of the printers on the Internet printing Web page, the client (running, for example, Windows Vista or Windows Server 2008) first tries to find a driver for the printer locally. If an appropriate driver cannot be
found, the print server generates a cabinet file (.cab file, also known as a setup file) that contains the appropriate printer driver files. The print server downloads the .cab file to the client computer. The user on the client computer is prompted for permission
to download the .cab file.
In this case, I would liket to confirm if a custom website is set up for Internet Printing. If so, a custom website will need to have the Printers virtual directory copied to it with the Application Mappings.
Please also check if the "Anonymous Authentication" and "Basic Authentication" is enabled in IIS Manager.
Hope this helps.
如果您对我们的论坛在线支持服务有任何的意见或建议，请通过邮件告诉我们。
立刻免费下载
TechNet
论坛好帮手 -
Installing Windows Server and Linux on a hyper-v
Scott Alan Miller wrote:
But we have lots of Windows too.
That allow the sunlight into your office?! :)Are you allowed to install Linux in a hyper-v on the same hardware as a Windows server? Also, would there be any issues to crop up? I am curious because I want to put Windows Server 2012 on one VM, Exchange on another VM, and then a Linux Server on another VM all on the same physical hardware. Windows Server 2012 Hyper-V would be hosting them all. The reason for the Linux Server is to use it for anti-virus or spam etc. and Linux is a free OS. I am curious though how it will jive with a Windows domain as well as being on the same machine as a hosted VM.
This topic first appeared in the Spiceworks Community -
Externalise Users from Essbase on windows server to shared services on unix
Hi All,
We have Essbase 11.1.1.3 installled on Windows 2003 service pack1 and we have Shared services on SUN OS 5.10 with Hyperion version 11.1.1.1 and when we are trying to externalise the users from essbase to shared services we are facing an error saying that
''Error: 1051429: ESsbase product existence check fails aganist the shared services server with error(unable to connect to shared services make sure server is up and running try again"
If you any ideas regarding this issue please let me know.
Thanks,
Ram.Hi Rob.
What if you:
start Computer Mangement.
Open System Tools
Right Click Shared Folders
Select All Tasks -> Configure Shadow Copies
Do you see/can configure both disk available there?
Via cmd can you list the volumes that vss knows about using:
vssadmin list volumes
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Even if you are not the author of a thread you can always help others by voting as Helpful. This can
be beneficial to other community members reading the thread.
Oscar Virot
Maybe you are looking for
-
How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?
-
Dear sap gurus I am creating material cost estimation with quantity structure while doing in T CODE CK11N the following error is coming Message no. 213 Cost component structure z9 is not active. But I am not using the particular Cost component struct
-
Report Not apperaing in User's Query Report Viewer Menu
Hello There! Continuing with below thread Report Category not Appearing in Report Definition When i search for a report i created, i'm(as a normal user) not able to find any report after searching.(assigned to me or to my role.) The view PSXPRPTSRCH_
-
Hi, I am considering getting the new 64GB macbook air and I have a question. Later on if I decide I want more memory, is it possible to upgrade it via the apple store or to do it myself? I'm a bit confused because for the 128 GB one it says online "C
-
please help me! Why when someone rings me on my number it also comes up on my dads phone we are both on isos 8 and he has the iphone 5 and i have the 5s (if that helps)