My accelerometer outputs a charge proportional to the acceleration to which the accelerometer is subjected to.Can the labview output the waveform in voltage?if not how can i overcome the problem ?

Im am using a labview RT with PCI-7030 DAQ board and a CB-68LP .This is urgent.can somebody please help?

I suggest you consult the manifactuer of the devices to see if they sell or can recomend signal conditioning gear to output a voltage or a current.
Generally speaking, the charge can be measured by using a capacitor (where V=Q/C) but the leakage current that is introduced when monitoring the voltage across the cap will adversly affect the measurements.
I have designed circuits to do this but it quite un-orthodox.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

HT5132 I can't click on the 'Learn More' or 'Ok' options so cannot use Aperture. How do I overcome this problem? I use OS X Lion 10.7.4

I can't click on the 'Learn More' or 'Ok' options so cannot use Aperture. How do I overcome this problem?
I use OS X Lion 10.7.4.
I also don't seem to be able to disable the Mobileme account via the system preferences option as mobileme doesn't allow access with my password.

Have you tried to disconnect from the Internet before launching Aperture? Then the MobileMe webpage should not be shown and you should be able to access the Aperture preferences and remove the MobileMe account from the "Preferences > Web" panel.
If this does not succeed, (Force) quit Aperture, log off and log on again, then remove the Aperture Preferences file (~/Library/Preferences/com.apple.Aperture.plist)
from the Preferences Folder in your User Library and try again to launch Aperture. See http://support.apple.com/kb/HT3805 on how to remove the Preferences.
Regards
Léonie

I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

reinstall iPhoto
see this discussion down a few from your post
https://discussions.apple.com/thread/5426566?tstart=0
LN

How do I fix my ipod classic that says very low batter after I have charged it and the problem persists?

I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!

Have you read this post written by another forum member?
The Sad iPod icon.
However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.
You can make an appointment by using this link.
Genius Bar Appointments.

Battery isn't charging, what's the problem?

I'm having problems with my battery again (3rd time, yay!). This started yesterday, everything was peachy the day prior. Can anyone assist? (hoping this is some silly operator error...)
-The power is failing when the AC adaptor is unplugged, but the menu bar says I have 10% battery charge left.
-The battery is not charging when the AC adaptor is connected. The light is on, but I checked in System Profiler. It recognizes the battery is installed but says it isn't charging. (yes, the outlet is live)
-I tried both cords for the AC adaptor.
*Battery Info from System Profiler*
Full Charge mAh: 2444
Remaining Charge mAh: 256
Cycle Count: 149
This is my 3rd battery for this notebook. The first one was recalled, the replacement failed shortly after and I bought the current one in May '08. (Serial: 3K8080HJT70C) What am I doing wrong?
Oh yeah, and my AC charger is new (6 months).

First, the battery. The recalled battery replacements have not held up well, and, unfortunately, feedback on the Apple site isn't what I would call complementary about their batteries. When I replaced mine, I got a Newer Technology battery from OWC at http://eshop.macsales.com/item/Newer%20Technology/BAP17AL60RS/ . Mine has 104 cycles on it and 4113 mAh capacity.
Now, charging. There are only 4 components in the charging circuit: Power adapter, DC-in card, battery and logic board. It sounds like your power adapter, being newer, is probably fine. Where the power adapter plugs into the computer, is that jack loose? If you put a pen or pencil on it and push it a little, gently, does it wiggle side-to-side? If so, your DC-in card may be bad. Assuming the battery stats are good and the battery is good, it should charge. Sooo, last but not least, is the logic board. Probably the best thing you can do is find a friend with a Powerbook or visit an Apple store or Apple authorized service provider to use another power supply that they know works (just to be sure) and a substitute battery (again, to be sure). If indeed yours are good, and I went through this a few months ago with one of our Powerbooks, you can replace the DC-in card, and if that doesn't work, then the logic board.
If you want Apple to do that, have them send it to the Apple depot, where they'll do whatever is required to put the Powerbook in close to new condition. Put an old, bad, Apple battery in it, so they'll replace it. Cost runs around $350 if the case isn't banged up, and if it is, the price can go up. When ours went in, they replaced the logic board and put a new battery in. Of course ensure your data is backed up, and if anything is really confidential, move it onto an encrypted disk on your hard drive or back it up and delete it.
If you have the store replace the logic board, it will run you more than double what they charge to send it to the depot.

When I open the browser, it says as an alert regarding the profile directory and says that read/write should be changed and it doesn't work then.i uninstalled and re-installed firefox6.0.2.how can i overcome this problem

could not initialize the application's security component .the most likely cause is problems with files in your application's probile directory.please check that this directory had no read/write restrictionsand ur hard disk is not full or close to full .It is recommended that you exit the application and fix the problem.if you continue to use this session ,you mightsee incorrect application behaviour when accessing security features....THIS IS THE ALERT I GET WHENEVER I TRY TO OPEN FIREFOX.

See:
*https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

HT5622 "The maximum number of free accounts have been activated on this iphone" message is received when I try to set up iCloud. How can I overcome this problem please?

I tried to set up icloud on my iphone 4 and I get this message that "the maximum number of free accounts have been activated on this iphone". My iphone was used by someone else before I got it. How do I deactivate these accounts or overcome this problem?

You were trying to create a new Apple ID for icloud. But once the device reaches is max allowed to create IDs then you can't create more. That's your situation now. To create a new account you must use another device or computer.
You can't deactivate or turn back the clock.

My firefox crashes unexpectedly while i am chatting. memcpy | F_826626007_________________ this is the crash signature . how can i overcome this problem ?

crashing firefox while chatting ...

This Bug was filed months ago for that crash signature - related to Adobe Flash. <br />
https://bugzilla.mozilla.org/show_bug.cgi?id=641775 <br />
''(Please don't comment in that Bug report unless you can provide a reproduce-able test case or a patch to fix the problem.)'' <br />
https://bugzilla.mozilla.org/page.cgi?id=etiquette.html
Looks like "the ball is in Adobe's court".

HT4356 I have the Epson SX435 printer on the box it states it is compatible to print on an IPad 3 has anyone else had this problem? How would I overcome this problem?

I have an Epson sx435 iprinter but get problems printing. It states on the box that it is compatible with new iPad.I keep getting the message no,air printer found. Anyone got any ideas?

Dorismaria1-
I do not see the SX435 listed on Apple's list of AirPrint compatible printers <iOS: AirPrint 101>. Are you sure it is not a TX435 or SX535?
I consider it deceptive when a printer company claims a model will work with an iPad, and doesn't make it clear that you have to have their custom App. If that is the case, you need to search the App store for the Epson App. You may not find it very useful, but it should get you printing.
In case your printer really is AirPrint compatible, your WiFi router may not correctly handle Bonjour data required by AirPrint to find the printer. You would need to contact the router's manufacturer to see if there is a change in its setup or a firmware update that will solve your problem.
Fred

HT4061 My phone won't charge with any battery what could be the problem?

My phone won't charge with any charger what could the problem be?

Dock connector. Try to clean out lint and dirt from the dock connector with a toothpick or paperclip and make sure there aren't any sprongs missing or damaged. Try another charger and/or a different outlet. Change the battery

How do I overcome the fact that not all HTTP requests require redirection

I have the following scenario, The Business require that the main login to JDE is just http://prod.apps, I use a redirect server to change it to
http://prod.apps:12001/prod/Mainmanu.maf so that all works well , but reports and approvals generate links with URIs so the redirect does not work. To overcome this problem I have generated another context with a different VIP without a redirect server and that seems to work ok. But the apllication programmers have to ensure that any reports etc point to this new VIP.
Is there a better way of doing this?

Hi
You may use L7 http class map and add additional matching by GET field in url request (as one possibility). E.g.
currently you have something like this :
policy-map type load first NAME
class class-default
serverfarm
you may add something like this :
class type http load match-any
match http url
then your L7 map will look like :
policy-map type load first NAME
class
serverfarm
class class-default
serverfarm
More information you can find here :
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA4_2_0/configuration/slb/guide/classlb.html#wp1021430
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA4_2_0/configuration/slb/guide/classlb.html#wp1021388
I think it should allow you to have only one VIP for this application. Please try - if you don't succeed, please post URL you use to access reports/approvals links.
If this answer resolved your problem - please mark it as correct it will help to keep our forum more organized.
Thank you.

I have installed my lexmark x1100 printer to macpro but it keeps telling me that the ink pots are wrong and they are not how can over ride this issue please help

I have installed my lexmark x1100 printer to my macpro lion but though it registers its there it keeps telling me that the inkjet pots are not in position or wrongly inserted, how can I overcome this problem which is driving me crackers!!!!!

Thanks for the additional info. If the printer works using your Dell Laptop, then the printer is working fine. The problem is with the driver. The Lexmark X1100 is only compatible up to Mac OS 9.2.2. If you have the Mac OS X, unfortunately, it's not compatible with that OS.
You might want to consider purchasing a new printer - preferably a network printer since you have multiple computers. We do have printers that are currently on sale online. You can check it out here: http://bit.ly/KQBDe0
Those printers are compatible with the newest Operating Systems both for Windows and Mac. It also has drivers for Linux.

HT4437 using airplay from my ipod touch 4th gen. no audio output from the tv. on the ipod it shows that it is streaming to the apple tv. whats the problem

i get the air play icon on my ipod touch. when i click it the output from my ipod stops but i dont get any audio from my tv. whats the problem?

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT201272 I have purchased a movie and elected to download later; when I go to the iTunes store, it shows where it is purchased yet when I go to the movie it ask for it to be purchased, will I be charged twice for the movie I have not downloaded yet?

I purchased the movie "Black Nativity" at midnight and selected to download later; it shows that the movie has been charged in my account for billing, however; I when I go to download the movie, it ask for it to be purchased versus download. I would like to know if I will be charged again for the movie upon selecting purchase movie? I would like some direction as for how to download the movie that I already purchased.

Clicking on its purchase price again may result in you being charged again. Does the Store > Check For Available Downloads menu option download it
Or does it show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage for downloading

My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or an airport power source. My iphone and ipad charge fine on the same cable usin ghte same wall plug in the same wall socket?

My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
Has anyone asked Apple directly about this?

Hi there Apples or Pears,
I would recommend taking a look at the troubleshooting steps found in the articles below.
Charging your iPod battery
http://support.apple.com/kb/ht1384
iPod's battery doesn't charge
http://support.apple.com/kb/ta44551
-Griff W.

My accelerometer outputs a charge proportional to the acceleration to which the accelerometer is subjected to.Can the labview output the waveform in voltage?if not how can i overcome the problem ?

Similar Messages

Maybe you are looking for