My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

Hi Ron.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Similar Messages

My apple tv 3 stop working when play postcast and can not be restored

I just bought apple TV 3 for 2 weeks. Everything is ok with setup and playing all functions. Yesterday, I playing postcast and suddently It stoped working and the screen was blank. I checked my Apple TV and the light was fashing very gast and it did not have any signal to the screen.
I tried connecting apple tv with latest iTunes and tried to restore software but final step when it extracted to apple tv, it appeared unknown error 1600 and i can not doing anything anymore.
I read some forum and tried the another method with remote to put apple tv to recovery mode but i was not successful.
Any ideas or help. My friends bought this apple tv for me from the US and I used it from Vietnam and it is hard to do warranty internationally although Apple said this product can be warranty international but when I send this product to authorised reseller, they refused.
Tks a lot

Have you tried restarting, the Apple TV, your router and your mac or PC.

The email adresse that I used to create my Apple ID isn't good anymore. I tried to change it but the new one that I have can't be use for MobileMe ??? Any idea why ?

The email adresse that I used to create my Apple ID isn't good anymore. When I tried to use my new email, I have a message in my iphone saying that this apple id can't be use for Mobile Me. I use this email for some Apple training at my job.
Thanks

http://forums.whirlpool.net.au/archive/1801333
I found the above link helpful! Apparently the @me.com is a separate "apple id" ...pretty stupid - the whole reason I got the @me.com e-mail is I thought I would streamline everything into one....
Cheers

Apple tv mirroring stops working

I just installed my new Bell modem SageMCom 2684 and my Apple TV mirroring stopped working properly--it freezes in less than a minute when I mirror a MacBook Pro. My TV, Apple TV, & Bell modem are relatively close. I disabled WMM, but no luck. I connected my old router to the modem & connected the Mac & aTV to the same wireless network, but the performace remained bad. I updated aTV's software, but no luck. Is this really a a Wi-Fi network problem, or an issue with Apple devices??? Thanks.

Hello edgar103
When dealing with AirPlay Mirroring , then check out the articles below to troubleshoot the potential issue with Wi-Fi settings. Look to make sure that the recommended settings are in place for your router as well any troubleshooting steps and looking for potential items that could be causing interference.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
Regards,
-Norm G.

Bought my iPhone in march with working sim just stopped working yesterday. Has been saying searching since yesterday what do I do?!!

Bought my iPhone in march with working sim just stopped working yesterday. Has been saying searching since yesterday what do I do?!!

is restart dont help
http://www.apple.com/support/iphone/assistant/phone/#section_1
then I would return it under warrenty

Apple Push has stopped working - Exchange Server Install

Just installed MS Exchange server. Set up my Windows 7 Pro machine and Outlook 2010. Everytime I open Outlook on my machine I receive a Apple Push has stopped working error.
Problem Details:
Problem signature:
Problem Event Name: APPCRASH
Application Name: APSDaemon.exe
Application Version: 2.1.14.3

You need to have iTunes recreate the Apple Push Service. To do this you need first !!!CLOSE ITUNES!!! to go to;
1. My Computer(or Computer if using vista or higher)
2. C: Drive (Usually called “Local Disk”)
3. Program Files (If you are using a 64 bit version of windows it will be in Program Files x86. To check if you are using 64 bit right click on computer and go to properties)
4.Common Files
5. Apple
6.Apple Application support
So your navigation bar should look like this: C:\Program Files (x86)\Common Files\Apple\Apple Application Support.
In there you are going to be renaming the file APSDeamon to APSDeamon.BAK and agree to any prompts that may appear. When you next open iTunes it will force iTunes to recreate that file as it is no longer able to find it. Now your apple devices should work again with your computer.

Most apple's app stopped working

hi
please help, suddenly most apple's app stopped working. reinstalling the OS didn't help.

You probably ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below. If you use any iWork applications, you may need to delete them and redownload them from the App Store.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

TS3623 purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father's Ipad2 last night.software is the same my Ipad2's IOS 5.0.1 (9A405), to my surprise it worked properly.

Hi! My name is Nazım . I live in North Cyprus. I’ve got Apple Ipad 2 and Iphone 4. My ıpad2 is iPad 2 Wi-Fi + 3G: Serial number: DQTFFVC1DFJ3., IOS 5.0.1 (9A405), model MC775LL .my itunes is last version. I bought my ipad from America.
I’ve recently bought Philips DC390 from Apple Store in Oxford Street. Althouh Philips dock 1 seemed to work properly (charged and player). The second dock isnot compatible with my ipad2. It didn’t work(play),It charges though.
I sended e-mailed to Philips.uk for assistance. They recomend met o reset my ipad2 to see if this clears any issue, but it does indicate a fault with the unit. It didn’t work either.s(everal time Ireset my Ipad2)
In addition to this, I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father’s Ipad2 last night.software is the same my Ipad2’s IOS 5.0.1 (9A405), to my surprise it worked properly. I’ve already reset my ipad2 several times but it didn’work.
I would be grateful if you could make me some recommendations to sort out the refered my problem.

Hi Nazim
This is a user to user group. There is no-one from Apple here.
Use this link to contact Apple directly.

My apple TV has stopped working completely. Just a flashing Amber light

My Apple TV has stopped working. When it is turned on I just get a flashing amber light and it does not turn blue as normal. It doesn't connect wirelessly to my Mac and it doesn't connect to the TV. I do not get the setup menu and it is totally unresponsive to the remote control. I have tried connecting it directly to my Mac but this also does nothing. I am at a loss as to what to do next. I have a lot of films and music stored on it and I am worried that I have lost it all. I am not sure which generation it is, but it is the silver one, model number A1218. Can anyone help?

Unfortunately, it sounds as though your Apple TV 1 has failed. Unlike the later Apple TVs, you cannot connect it to iTunes to restore it.

HT1551 My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times

My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times what else can I try to fix it?

Have you tried unpairing the remote? You do this by pointing your remote at the Apple TV and holding the MENU and Left buttons down together for 6 seconds.

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?

Several days ago some of the links in my Apple Mail messages stopped working. Specifically, the links going to some variation of "response beacon" don't work. All I see is a blank screen. Does anyone have any idea how to fix this?

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Apple push as stopped working

I have this message when i shut down itunes"apple push as stopped working" since i download itunes 11, alos my remote doesn't work properly

See this thread: https://discussions.apple.com/message/16502356
To summarize that thread, a workaround for this problem is to set APSDaemon.exe to always run as an administrator. Here's how to do it in Windows 7 (Vista should be almost exactly the same).
Browse to "C:\Program Files (x86)\Common Files\Apple\Apple Application Support"
Right-click on APSDaemon.exe
Under the Compatibility tab, check "Run this program as an administrator"

Apple push has stopped working what should i do/

ALL OF A SUDDEN A NOTICE COMES UP ON MY PC SCREEN WHICH SAYS APPLE PUSH HAS STOPPED WORKING. ANYONE KNOW WHY AND IS IT OK JUST TO IGNORE.?

Try this document:
<http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html>
You are using Apple MAC right?

My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

Similar Messages

Maybe you are looking for