My apple tv gives a msg " there was a problem connecting to the network " check your settings and try again (5) - sometimes it comes with the number 3905 - i have tried all the suggestions from reset, restart, to switching and unplugging everything -
I was trying to download a movie and then it said there was a problem connecting to the network , check your settings and try again (5) . I tried all the various suggestions already in the discussions including restore, restart, unplugging everything etc - still doesnt work. Any other new ideas? I bought my apple tv just a few days ago and am really annoyed its already run into problems
Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).
Similar Messages
-
why wont my apple tv see my library? I can connect to internet etc... But it has stopped seeing my media files on my pc. i have tried all the suggestion but with no luck:-(
Hi
i have the apple tv2. I was working ok,with no problems but now will not see my library. I have all my films music etc.. on a extl hard drive and my itunes is set to that file.
its wireless connected via my Bt home hub
I have tried restore , i have moved it to a new location . as i said i can get youtube and go to the itunes store but will not see my media files .
tried unplugging router, unplugged the apple tv, no success.
any other suggestions Winston? -
I recently purchased the New IPad and am trying to sync to this computer. I need to download iTunes and /or Quick Time. Last night I tried downloading Quick Time and this morning it was still trying to load. iTunes will not download, but gives me the error code " not a 32bid win program" I am running a 64 bit system and have tried all the fixes that are listed. Now what. This is a Acer, Windows 7 64bid system.
iTunes will not download, but gives me the error code " not a 32bid win program" I am running a 64 bit system and have tried all the fixes that are listed.
Doublechecking. In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application" -
I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
The message ~There was a problem connecting to the server “your-447023ae6b”.appears when I try to play music transferred from my PC to my iMac. Files were transferred from my PC by a Genius. How do I sort it? Next appointment with genius is 5 days away!
Hi
Thanks this has helped me solve the problem.
I used the Outlook Anywhere connectivity tester you suggested. Selected Outlook autodiscover.
It told me that it could not resolve things on any of the 4 tests.
I saw that using the last test "Attempting to contact the Autodiscover service using the DNS SRV redirect method", was the only one likely to work in my case.
I had already changed 3 entries in dns to point at my DDNS address but this had not worked, from the errors I could see that it was just the certificate name not matching so I changed the DNS entries for Autodiscover, autoconfig and _autodiscover._tcp
to be webmail.domain.com which is a CNAME to my ddns address for the broadband router, which in turn forwards ports 80 and 443 to the exchange server for owa and activesync access. I got an error message saying that I had an illegal entry in my SRV record
as a CNAME is not allowed, but it saved the change anyway.
I reran the test and it worked.I can now make new outlook clients attach teo exchange.
Thank you, after 8 hours yesterday of trying to reolve this I suddnely got it to work on one laptop but the other still would not and had lost track of what I could have changed so had no idea what actually made it work.
Thank you for your suggestion. -
I upgraded to iOS 7 to my ipad using iTunes. When signing with the Apple ID I get an error reading "There was a problem connecting to the server" anyone who knows what to do next
Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer. -
Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting TC.
The TC is the wifi base station, also have AirportExpress on the network, both of which work fine. The TC has an external disc connected as well, which is also visible in the sidebar but also cannot be connected to. Several MB computers use the network, all of which either can or cannot connect to the TC disc depending on when it is acting up.
Any ideas other than clicking "connect as" or powering down the network every time?Read up how to install 5.6 utility into ML.. it is pretty easy.
I downloaded 5.6
http://support.apple.com/kb/DL1482
Download unpkg
http://www.timdoug.com/unpkg/
Open the dmg to get the pkg.. drag it onto unpkg.. and it will create a directory under desktop with all the files.. drag the application to the utility directory.. or just run it direct.
Google if you want more explicit instructions.
Much easier with a real tool instead of a toy.
Hold the option key when you select firmware update.. all the old ones will appear.
But this will not work on newer Gen4.. only on every other model and early Gen4. .I do not know when they turned the corner and started this only 7.6 nonsense. -
I just updated my iphone4, it reset to original settings and I cannot get it passed my birtday. It says ther was a problem connecting to the server. how do I get passed this?
I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck. -
I just bought a 3rd generation ipod touch. It was professionally refurbished. I'm trying to set it up, and everything seems to be working fine, until we get to the wifi. I live on campus and our wifi is username and password protected. I signed in and everything seemed to work fine, and in the top left hand corner I have all the bars for wifi. However, when I go to sign in with an apple ID it says 'Could no sign in: there was a problem connecting to the server'. I've tried turning it on and off again, tried signing on to our wifi again, but it all isn't working. What can I do?
I also encountered the same problem. Try using a different email address or try signing in later.
-
When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?
Where is everyone???? Does anyone have an answer???
Allik1 -
I am unable to connect my Macbook air, iPhone or iPad though bluetooth. I have tried all the suggestions I have read. i.e. toggle bluetooth on and off, turn devices on and off, forget devices and then pair. I seem to be able to pair but the devices immediately go to not connected and a message appears that reads: make sure devices are turned on and in range.
Pairing the phone with the car is one thing, but paring to the computer is not generally supported. Tethering is using the cellular data access from the phone for the other devices. It is part of Personal Hotspot. If you aren't aware of what it is, then it probably is something you do not use.
As far as the car is concerned, what is not working? Does the car not see the phone, or the phone see the car, or after you start to pair something fails? If you provide more information about the problem and what you have tried to do to correct it, then we can offer some solutions. What version of the iPhone, what iOS, and what year and make of vehicle? -
My iPad is not being recognised in iTunes. I have tried all the basic tests and then followed a series of uninstall instructions. One suggests deleting the following file however I cannot locate it - "com.apple.usbmuxd.plist-orig". Is there anything else I can do?
My iPad is not being recognised in iTunes. I have tried all the basic tests and then followed a series of uninstall instructions. One suggests deleting the following file however I cannot locate it - "com.apple.usbmuxd.plist-orig". Is there anything else I can do?
-
There was a problem connecting to the server ... OS 10.8.4 + WD NAS
Dear all,
first my configuration:
iMac from mid 2012, MacOS X Mountain Lion, 10.8.4, iPhoto 09 v. 8.1.2 - all software updates done and up-to-date
MacBook Pro late 2011, MacOS X Mountain Lion, 10.8.4
NAS WD My Book World Edition II (white light), 2 x 1TB (configured RAID : 1TB mirrored), original firmware (01.02.14 with MioNet built on Thu Feb 9 14:11:48 CST 2012 ) NFS, AFP enabled
a win 7 laptop and plenty of other devices
everything on a LAN with GB router + WiFi
I have my iPhoto library on my iMac, but the photos (the originals) stored on the NAS. I have the option "copy photos to library when importing" disabled. So I guess iPhoto has a reference / link in the library to the original files.
Everything used to work fine until some weeks ago. Not sure what happened but suddenly I got the error message "There was a problem connecting to the server ... Check the server name or IP address, and then try again. ..." when I tried to import photos stored on my WD NAS. When I want to display any photo stored on the NAS - same thing.
Now I guess I have a bunch of gray hairs more while trying to get this fixed.
I tried so many of the tips posted everywhere including booting in save mode, deleting the .plist files (first I actually tried to clean them using Xcode first before deleting them), etc. I cleared out KeyChain. I removed all recent entries (folders) and recent servers from the "history". I tried to connect as guest or named user. There are also no "logIn items" pointing to the NAS. I even tried to disable / enable AFP + NFS on the NAS, not to mention countless restarts of all the machines
One other thing I noticed: Before that problem occured I was able to select the NAS in Finder and it would show me all the shares. When I selected one of them it was mounted automatically. When I select it now I get "connecting" for a loooong time and then "Connection Failed". Most of the time (not always!) however I am able to get in via "Go -> Connect To Server - smb://<nas server name>). And suddently after that also selecting the NAS in Finder shows me all the shares! Hoever even this not in 100% of all cases. I can replicate this from the iMac and the MacBook.
I do use an external HD for TimeMachine to back up my data (directly connected via USB). No issues there.
Not I really don't know what to do any more
Do you have any ideas? Did anyone ever get a response from Apple with a useful solution that really hit the core of the issue?
Thank you!SOLVED!! and I want to share the solution which worked for me with everybody here. Ultimately I had to install nettalk 2.2 on my NAS as described here: http://mybookworld.wikidot.com/netatalk2-2-on-whitelight . A nice description on how to do that can be found here: http://forums.macrumors.com/showthread.php?t=1102423 .
One last remark: When asked about the "DHX2 login process", I opted to install the original version, so I can confirm this one works too. -
I noticed this week an exclamation mark on the time machine icon on the menu bar.
My Macbook, iPad and iPhone all connect to the network but i get "there was a problem connecting to the server..."
When I open the preferences the time capsule is off but turnign it back on sends me in a loop of selecting the Time Capsule device (which has a nice green light etc) and then getting the error messgae about being unable to connect. I've pulled the plug a couple of times (this has worked in the past) but no change.
Any advice would be welcome before I try a factory reset or have to return to Apple for repair (the one thing they are offering as the thing is only 5 months old)I also noticed that when I go to finder I see two MacBook Air's that are in my name but have the number (2) and (3) next to the name.
That is a well known bug in Yosemite.
Try open System Preferences (gear icon on the dock)
Open Sharing
Edit back to the correct name for your Mac
This may...or may not help. But, it won't hurt.
The Mac's name may stay stable....or you may see (2), (3), etc again soon.
Be sure to restart both your Mac and the Time Capsule after you do this. -
On submit button type - There was a problem connecting to the server.
Hi,
Please give me a solution for server connection issue. I am new to the adobe live cycle designer ES4.
I created a web form use of adobe live cycle es4 v.11.0 to retrieve the data from web service method. So, I created the WSDL type data connection in data view menu to invoke the .asmx?wsdl service and connection is established successfully. Then, I dragged and drop a button from object library window to invoke the service method and changed the type as submit button. In the submit button URL, I given the web service url as eg. http://<localhost>:<port>/Web_serive.asmx?wsdl. Finally, I saved it has a PDF file.
When I click the submit button, a pop up window is openning as 'preparing for submit..' and 'Receving data..' and finally, it shows a pop up error message as 'An error occured during the submit process. There was a problem connecting to the server'. I tried all possiblities and if any bad english grammer, sorry for that.
Please give me a proper solution for this issue.
With Regards,
G. Prabakaran.After trying these suggested actions several times success has not been reached.
I understand you are getting unable to connect to server error message on your printer. I would first unplug router and printer for about 1 minute. I would plug router up first then printer. I would then try to enable web services. If not successful and you get same error message. I would follow these steps.
1. Obtain your printer's IP address
a. This can be done by pressing the wireless icon on printer.
2. Enter the printer's IP address in a browser.
3. Select the network tab at the top of the page.
4. On the left select networking.
5. Select Network Address (IP)
6. Select Manual DNS Server
a. Manual Preferred DNS should read 8.8.8.8
b. Alternate DNS Server should read. 8.8.4.4
7. Select apply you might get a warning just select okay.
8. Try again to access ePrint.
Let me know how it goes.
I am able to print wirelessly to the printer, print through eprint, scan, and copy things. The only thing that is not working is the printer itself connecting to the hpeprintcenter.com.
Kyle
Maybe you are looking for
-
In Mavericks, how do I change the "name" of a bluetooth device?
I have a bluetooth mouse that has been given a name that I wish to change. But I can't find a way to change the name.
-
I can't find a way to purchase my iTunes wish list.
Using iTunes 11.1 - created a wish list of music to purchase, but there is no "buy" button on the wish list screen (unlike what the help page suggests). Is this a bug, or am I missing something really obvious? thanks for any help!
-
No element type defined for object type BSEG and system / Disp Management
Hi all, I get the error message No element type defined for object type BSEG and system ... Message no. UDM_MSG006 when I try to save a dispute case. What do I have overlooked in config? Thanks Hein Points guaranteed as always.
-
Hi, I've a couple of tables that has a million records or more and occupying some 300MB of space.I export these tables with no data (using the ROWS=N option). When I try to import these tables from the .DMP file, the tables gets created with 300MB of
-
Why is Get_Item_Property ('my_item', Canvas_Name) undocumented?
I found yesterday, that canvas_name is working and it does a very good job in my webforms-environment. Is it undocumented, because it is obsolet, it becomes obsolet or is it still forgotten in the doc's ? Gerd