My apple TV optical connection is not working with optical to analog adapter after the update to 6.0.

When i bought the apple tv, i could listen to my iPhone's music on my home's audio system, which was connected to the apple tv through a digital to analog audio converter. It was working until the apple tv upgrade to 6.0. I tried connecting the apple tv directly to another amplifier with optical input and it worked fine, i tried the converter on the play station and it worked as well. I switched the DD on the apple tv settings from Auto to on and the problem remains. Any ideas?

Welcome to the Apple Community.
Try switching Dolby digital to off.

Similar Messages

Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

Ear Sir: Yesterday on 18.09.2014 evening, I wanted to install IOS 8.0 according to your instructions iPhone 5S.during installation Stopped working and was closd, I can not work with him. Ibought it in the United States Apple Store Fifth 40venue 767 N

Dear Sir: Yesterday on 18.09.2014 evening, I wanted to install
IOS 8.0 according to your instructions iPhone 5S.during installation
Stopped working and was closd, I can not work with him. Ibought it in
the United States
Apple Store Fifth 40venue 767 New York NY1053
iPhone 5s Spase Gray 32 gb verizon.
Part Number: ME344ll / A.
Serial number: DN*******NjM.
Model A1533. I would like to request a new password for opening the
iPhone. Passwod..... Thank you very much,
Im not difficult for you to request a quick answer.Israel.
<Personal Information Edited By Host>

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - it looks like somebody has asked the hosts to remove your personal info from your post (it's not a good idea to post any personal info on any public forum).
What do you 'stopped working and was closed, I can not work with him' ? What exactly are you seeing on the phone's screen ?
If it's the activation screen and you can't remember your password for your account then see if you can get it reset via http://iforgot.apple.com

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

My documents to go is not working with my ipad. Is in the same wi-fi net

my documents to go is not working with my ipad. Is in the same wi-fi net. the intrener is ok, but i can to do synchronization?

I just synced mine and it worked just fine. I have an iPad 2 and the desktop version is running on a win 8 laptop.
Have you tried to unpair and re-pair your device? I've had to do that upon occasion.

My iPhone 5 stopped working with my 2015 Subaru Outback after the iOS 8.1.3 update

My iPhone 5 stopped working with the USB connector on my 2015 Subaru Outback. The phone will still charge, but the message is something like "this iPhone will not work with this accessory". Is there a fix being made? I saw others post with issues with the latest update. It worked fine with the prior iOS version 8.1.2

Hello bballfan85,
It sounds like your getting an error message that the iPhone isn't going to work with your Subaru all of a sudden over USB. I would use these troubleshooting steps from this article, named:
If you need help with iPhone, iPad, or iPod touch accessories
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
These steps will help you troubleshoot the iPhone side of the equation.
Thank you for using Apple Support Communities.
All the best,
Sterling

Optical Audio Is Not Working with Onkyo Receiver TX-SR501

Hello,
I can't seem to make the optical audio from Apple TV work with my Onkyo Receiver TX-SR501. The Onkyo has 2 optical audio lines in in the back. When I hit the "digital input" button on the front of receiver, I can select from OPT1, OPT2, or COAX. I currently have the optical audio line going into OPT2, but if I select OPT2, I hear no sound. Any suggestions?
Thanks,
Holly

I have the exact same receiver (Onkyo TX SR-501) and tgibbs is correct...you must (during a setup process) link each function (DVD, Video 1, Video 2, Video 3, CD, etc.) with its audio source. The Optical cable doesn't connect to a "function" in the back, it connects to an "input". The receiver gives you the freedom to use different inputs with different functions. It's your job, durng the "setup" to map each of these inputs to each function...that way the receiver knows where to go looking for the audio that you are feeding into it for each function you choose. The owners manual has a pretty clear setup process outlined in it.
Not clear to me that you understood this, so forgive me if I am explaining what is already clear to you.

HP Laserjet USB Connection Does Not Work with Gigabit Airport Extreme

I have set up my Airport Extreme Gigabit edition. It works well for wireless internet. BUT, I connected my HP Laserjet 1300 via a working USB cable, and it doesn't print properly at all. This Laserjet uses the HP Universal Drivers in Vista, which should work with the Extreme if anything should. I have set up and located the printer in Bonjour as instructed.
With the PCL6 driver, I get one page that prints out portions of the test page text, but with most of it missing, and then a second page saying:
PCL XL error
Subsystem: KERNEL
Error: UnsupportedProtocol
Operator: 0x0
Position: 0
The PCL5 driver prints out "a" page, but the text comes out as solid black lines instead.
I have tried turning the printer on and off, the router on and off, and deleting the printer and re-creating it in Bonjour, as suggested by Apple's technical support document. Nothing works. I have downloaded the latest Windows software and router firmware for this product, both of which were released recently. Same result. I also tried connecting my laptop via a Gigabit port instead of wirelessly to see if that would help. Nope.
I have seen a few postings in other forums (not here) saying that the Airport Express (Gigabit) firmware has problems with HP printers connected via USB, which seems hard to believe given their ubiquity. If that is the case, I'd appreciate a straight answer from somebody on when it will be fixed. Some have suggested just using Ethernet, but I purchased this product (and therefore paid extra) for the USB print server, and expect to get that working.
Thanks very much.

I have an HP laserjet 4L with a usb adapter connected to the airport via a usb hub, and have had little trouble, except for last night it kept printing 1 partial page over and over. I printed multiple pages at once, I figured the printer just OD'd, after all its an old printer. I have one laptop that uses Vista, and its always giving me grief. Vista

Apple wired keyboard - certain keys not working with shift

I treated myself to a new Apple wired keyboard MB110B/A for my mac mini.
My previous keyboard worked fine, however the new keyboard causes the computer to enter the Hardware Test mode every time the computer is restarted. The computer only starts normally without the keyboard connected (or with my old keyboard connected).
Once the computer has started, if I plug the new keyboard in, it appears to work normally with the following exceptions. The following keys do not register when the "shift" key is pressed: 2, w, s, x. This fault does not occur with my old keyboard.
As these keys are in a line, I think there may be a wiring fault inside the keyboard. If so, would this explain the computer entering Hardware Test mode every time it is started with the keyboard connected?
Thanks in advance.

Definitely sounds like a hardware fault in the keyboard to me. I assume it's the same whichever USB port it's connected to? (and if you plug it into another Mac, too)?
Of course, as that keyboard is glued together in final assembly, it's completely unrepairable.
If it's a reproducible fault (and new anyway): take/send it back for replacement. You shouldn't have any trouble with Apple arguing.

Camera connection kit not working with ipad2

I have had no problems using my camera connection kit, and have downloaded plenty of pics and films, but it now seems that since I have updated to recent IOS it now no longer works and just comes up with the 'this accessory is not supported by ipad' message.
Anyone got any ideas? I have tried several SD cards and several cameras, so it is a problem with the ipad itself by the looks of it. I have tried a soft reset, turned on/off etc.
Many thanks in advance.

I have a 5 in 1 (not Apple) connection kit and like most others was pulling what little hair I have out trying to use the SD card reader on my IPAD 3 (probably the same with the Ipad 2), it simply does not work since the recent software upgrades. However I have just discovered that my camera USB connection lead DOES work when connected to the USB socket of the 5 in 1 connector. You will need to move the little black switch on the connector to the USB position. Once connected it shows an import icon which then allows scroilling through every photo on the camera. I can now import selective or all photos and it saves spending out £25 plus on an 'official' connector. Hope this helps.

Camera Connection Kit Not Working with Canon Rebel

Using the connection and the Canon Rebel SRLD, I was not able to transfer pictures to the iPad.
I was able to transfer pictures using the memory card.
Not able to transfer pictures from the 3G iPhone.
Should I take the connection kit, the camera, and the iPad to an Apple store to see why it's not working, or does anyone have any solutions.
Thanks,

The cameras connection kit does not support the iPhone 3G.
http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE&mco=MTc0Njk4NzU#ov erview
It does however supports both the iPhone 3GS and 4.

ODBC Connection Pooling not working with 10g On Windows 2003

I have a bog standard Windows 2003 machine and installed Oracle 10g on it. It seems that the ODBC Connection pooling is not working.
I am using ASP and every time I try and render a simple page it is taking 4-5 seconds which is the time necessaru to create a database connection. ( Machine is 2.8 Ghz Xeon with 2 gigs of Ram)
The following VB Code can be used to test that the pooling is not working. It creates 2 connections to the database. On oracle 10g on windows 2003, it takes 5 seconds to create the first connection, and another 5 seconds to create the second connection.
When you run the same program on windows 2000 and oracle 9, the first connection take 3 seconds, and the second 0.05 seconds. ( The shorter time being due to the connection pooling)
time1=timer()
set conn=createobject("adodb.connection")
Conn.Open "dsn=oracleDSN;uid=yourusername;pwd=yourpassword"
time2=timer()
msgbox time2-time1
conn.close
set conn=nothing
time1=timer()
set conn=createobject("adodb.connection")
Conn.Open "dsn=oracleDSN;uid=yourusername;pwd=yourpassword"
time2=timer()
msgbox time2-time1
conn.close

ODBC Connection Pooling is controlled by the ODBC Driver Manager and defaults to off for every driver on every platform. Have you enabled connection pooling for your driver in the ODBC Data Source Administrator?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Camera Connect Kit not working with iOS 4.2 software update

Since updating my iPad software to iOS 4.2 when I try to use my Camera Connect Kit I receive a message saying "Cannot Use Device: the connected USB deivce requires too much power"
Can any body help me find a way to fix this problem, or even tell me how i can downgrade to the previous software on my iPad as I am sure this is what is causing the problem as my CCK worked fine before I upgraded.
Thanks,
Amber-Rose

One article that might be helpful is here (suggesting you need HUB if it's drawing too much power):
http://support.apple.com/kb/HT4106
@ rotorcraft:
It has to have a DCIM folder, but the directory after the DCIM folder, and the files themselves, have to follow DCF rules (http://en.wikipedia.org/wiki/Designrule_for_Camera_Filesystem)..if it's the structure created by the camera it should be fine but if you change the folder to something other than DSC_xxxx and you change the image filename to something other than ABCD1234.whatever then it won't show up.
You can double check if the kit is being recognized at all in Settings -> About, then scroll to the bottom, it should say like Apple Card reader or something I forget. If it isn't, I would just reboot

Connect By not working with nested queries in from clause.

Using Connect By on a query which has a nested from clause(The from clause fetches around 100k records) gives incorrect results but if the same nested queries are used to build a table and the Connect By is used on the table then the output is correct.
I put the nested queries in a 'WITH' clause and got the correct output also.
I am not sure how to give the code here as you would need dump to make them work.
I am giving the a sample code:
--Non Working Code
SELECT     con_item, prod_item, compsite, bcsite, ibrsite, res
      FROM (SELECT con_item, prod_item, compsite, bcsite, ibrsite, res
              FROM (SELECT bd.item AS con_item, bd.fromid AS compsite,
                           bd.toid AS bcsite, bd.toid AS ibrsite,
                           bd.bodname AS ID, bd.item AS prod_item,
                           'BOD' AS res
                      FROM TABLE1 bd
                    UNION
                    SELECT bc.item AS con_item,
                           bc.componentsiteid AS compsite,
                           bc.siteid AS bcsite, ibr.siteid AS ibrsite,
                           ibr.routingid AS ID, ibr.item AS prod_item,
                           op.resourcename AS res
                      FROM TABLE2 ibr,
                           TABLE3 bc,
                           TABLE4 op
                     WHERE ibr.bomid = bc.bomid
                       AND ibr.siteid = bc.siteid
                       AND ibr.routingid = op.routingid(+))
             WHERE con_item IN ('SCFCD0T9B', 'SWXCD0S9B')
               AND ibrsite LIKE 'CRCW%HSM')
START WITH ibrsite = 'CRCW_QA_HSM' AND prod_item = 'SWXCD0S9B'
CONNECT BY PRIOR con_item = prod_item AND PRIOR compsite = bcsiteWorking Code:
--The table TEST_V is constructed on the from clause of above query
SELECT     CON_ITEM, PROD_ITEM, COMPSITE, BCSITE, IBRSITE, RES
      FROM TEST_V
START WITH IBRSITE = 'CRCW_QA_HSM' AND PROD_ITEM = 'SWXCD0S9B'
CONNECT BY PRIOR CON_ITEM = PROD_ITEM AND PRIOR COMPSITE = BCSITEAlso another working code:
WITH SUB AS
     (SELECT BD.ITEM AS CON_ITEM, BD.FROMID AS COMPSITE, BD.TOID AS BCSITE,
             BD.TOID AS IBRSITE, BD.BODNAME AS ID, BD.ITEM AS PROD_ITEM,
             'BOD' AS RES
        FROM TABLE1 BD
      UNION
      SELECT BC.ITEM AS CON_ITEM, BC.COMPONENTSITEID AS COMPSITE,
             BC.SITEID AS BCSITE, IBR.SITEID AS IBRSITE, IBR.ROUTINGID AS ID,
             IBR.ITEM AS PROD_ITEM, OP.RESOURCENAME AS RES
        FROM TABLE2 IBR, TABLE3 BC, TABLE4 OP
       WHERE IBR.BOMID = BC.BOMID
         AND IBR.SITEID = BC.SITEID
         AND IBR.ROUTINGID = OP.ROUTINGID(+))
SELECT     CON_ITEM, PROD_ITEM, COMPSITE, BCSITE, IBRSITE, RES, LEVEL
      FROM SUB
START WITH PROD_ITEM = 'SWXCD0S9B' AND IBRSITE = 'CRCW_QA_HSM'
CONNECT BY PRIOR COMPSITE = BCSITE AND PRIOR CON_ITEM = PROD_ITEMI am sorry if I am giving incorrect syntax, please let me know if my giving the dump of table be of any help.
Regards,
Vikram
Edited by: BluShadow on 11-Jan-2012 11:05
fixed {noformat}{noformat} tags.

Hi, Vikram,
Welcome to the forum!
user2765706 wrote:
Using Connect By on a query which has a nested from clause(The from clause fetches around 100k records) gives incorrect results but if the same nested queries are used to build a table and the Connect By is used on the table then the output is correct.
I put the nested queries in a 'WITH' clause and got the correct output also.What exactly is the problem? Why not use one of the queries that gives the correct output? I find that WITH clauses are a lot easier to understand and debug than in-ine views, anyway.
Are you just wondering why one of the queries doesn't work?
I am not sure how to give the code here as you would need dump to make them work. You're absolutely right! You need to post some sample data and the results you want from that data. Without that, it's much harder for people to understand what the problem is, or how to fix it.
I am giving the a sample code:
--Non Working CodeLet's call this Query 1.
SELECT     con_item, prod_item, compsite, bcsite, ibrsite, res
FROM (SELECT con_item, prod_item, compsite, bcsite, ibrsite, res
FROM (SELECT bd.item AS con_item, bd.fromid AS compsite,
bd.toid AS bcsite, bd.toid AS ibrsite,
bd.bodname AS ID, bd.item AS prod_item,
'BOD' AS res
FROM TABLE1 bd
UNION
SELECT bc.item AS con_item,
bc.componentsiteid AS compsite,
bc.siteid AS bcsite, ibr.siteid AS ibrsite,
ibr.routingid AS ID, ibr.item AS prod_item,
op.resourcename AS res
FROM TABLE2 ibr,
TABLE3 bc,
TABLE4 op
WHERE ibr.bomid = bc.bomid
AND ibr.siteid = bc.siteid
AND ibr.routingid = op.routingid(+))
WHERE con_item IN ('SCFCD0T9B', 'SWXCD0S9B')
AND ibrsite LIKE 'CRCW%HSM')
START WITH ibrsite = 'CRCW_QA_HSM' AND prod_item = 'SWXCD0S9B'
CONNECT BY PRIOR con_item = prod_item AND PRIOR compsite = bcsite
[\CODE]
Working Code:Let's call this Query 2.
--The table TEST_V is constructed on the from clause of above query
SELECT     CON_ITEM, PROD_ITEM, COMPSITE, BCSITE, IBRSITE, RES
FROM TEST_V
START WITH IBRSITE = 'CRCW_QA_HSM' AND PROD_ITEM = 'SWXCD0S9B'
CONNECT BY PRIOR CON_ITEM = PROD_ITEM AND PRIOR COMPSITE = BCSITE
[\CODE]Why does Query 1 not do the same thing as Query 2? That depends on what is in test_v. Only you know what test_v is, so only you can say. If you'd post the code that created test_v, maybe somebody else could help.
Also another working code:Let's call this Query 3.
WITH SUB AS
(SELECT BD.ITEM AS CON_ITEM, BD.FROMID AS COMPSITE, BD.TOID AS BCSITE,
BD.TOID AS IBRSITE, BD.BODNAME AS ID, BD.ITEM AS PROD_ITEM,
'BOD' AS RES
FROM TABLE1 BD
UNION
SELECT BC.ITEM AS CON_ITEM, BC.COMPONENTSITEID AS COMPSITE,
BC.SITEID AS BCSITE, IBR.SITEID AS IBRSITE, IBR.ROUTINGID AS ID,
IBR.ITEM AS PROD_ITEM, OP.RESOURCENAME AS RES
FROM TABLE2 IBR, TABLE3 BC, TABLE4 OP
WHERE IBR.BOMID = BC.BOMID
AND IBR.SITEID = BC.SITEID
AND IBR.ROUTINGID = OP.ROUTINGID(+))
SELECT     CON_ITEM, PROD_ITEM, COMPSITE, BCSITE, IBRSITE, RES, LEVEL
FROM SUB
START WITH PROD_ITEM = 'SWXCD0S9B' AND IBRSITE = 'CRCW_QA_HSM'
CONNECT BY PRIOR COMPSITE = BCSITE AND PRIOR CON_ITEM = PROD_ITEM
[\CODE]Why does Query 1 not do the same thing as Query 3? Query 1 has these conditions:
...           WHERE con_item IN ('SCFCD0T9B', 'SWXCD0S9B')
                AND ibrsite LIKE 'CRCW%HSM'but Query 3 does not.
I am sorry if I am giving incorrect syntax, please let me know if my giving the dump of table be of any help.Yes, that always helps. Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data. Simplify the problem as much as possible. For example, if you have the same problem when you leave out one of the tables, then don't include that table in the problem.
Always say what version of Oracle you're using. This is especially important with CONNECT BY queries, because every version since Oracle 7 has had major improvements in this area.

Apple Wireless Keyboard - some keys not working with iPhone 5

I just bought an Apple Wireless Keyboard (2011) and paired it with my iphone 5 (iOS 7.0.3).
All keys work except the following:
Space bar
Delete
Caps Lock
Down Arrow
Tab
I can understand if iOS has no concept of Tab, but Space and Delete are essential.
Did I get a bad keyboard?

Hi Scoobydootoo,
I understand that you are experiencing an issue with your keyboard responsiveness. Here is an article that will help you troubleshoot this issue:
Troubleshooting wireless mouse and keyboard issues - Apple Support
https://support.apple.com/en-us/TS3048
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

My apple TV optical connection is not working with optical to analog adapter after the update to 6.0.

Similar Messages

Maybe you are looking for