My application doesn't update

Hello i've one javafx application deployed in my server.
Every time i need to clear up the java cache for new changes happened on my javafx application..
I 've updated many changes of my apps by uploading in server
but one issue: In one of my old computer where I 'd installed my app from server before 1 month ago still shows the same old application [cached].
Is there any way to make the java cache clear via jnlp or
there any tag which can download the updated jar file when the server jars are not matched with the client [cached] jars.
Please help/suggest.
Thanks..in advance.

narayan_gop_mah wrote:
..I usually use download="eager" but JaNeLA has told that it would be better if i use lazy download.Better? I am looking at the source of JaNeLA right now and the only find on 'better' is in a warning that is not related to downloads.
Please always [copy/paste error messages or warnings|http://pscode.org/javafaq.html#exact].
As an aside I prompted you to check that your JNLP files were 'valid and correct'. If they are not valid and correct, JaNeLA will be producing red colored errors.
You can ignore the optimizations and warnings. The lazy/eager decision is always a matter of optimization, and does not relate to the basic problem you described.
Did you check the server file times like I suggested? What were the results? I feel like you are treating this like your personal help-desk, when it is a discussion forum.

Similar Messages

Application doesn't update in web conferencing

I tried to share a graphics application, ProductView, in Web Conferencing. It worked at first, but the graphics portion does not update at the shared sites.
This product probably uses Open/GL to display its graphics. Is there a limitation in Web Conferencing application sharing?
David

The problem was I forgot to include one of the .jar files in the .jnlp file. The application started but immediately finished because it couldn�t find the second jar. Java console has the same behavior and this is why I couldn�t see the message in the console.
Thank you anyway!

Find my Friends application doesn't open after updating my iphone 6 to IOS 8.1.2

Find my Friends application doesn't open or quits immediately after updating my iphone 6 to I.O.S. 8.1.2

Finally found the solution to this issue after reading other complaints similar to mine. Go to Settings > General > Reset > Reset all settings.
After doing this the Find Friends apps, Find my iphone apps & maps will open without crashing

Modified CRM application doesn't deployed in PROD server.

Hello SDN!
We have DEV and PROD runtime systems for CRM developing. Our custom CRM application successfully deployed to the DEV server many times. But transport to the PROD server hasn't any effect - our application doesn't exists in PROD server.
In CMS we assemble CRM SCs (SAP-CRMAPP, SAP-CRMDIC, SAP-CRMWEB, SAP-SHRAPP, CUSTCRMPRJ, SAP-SHRWEB), approve it and finally import in in "Production" tab. There was no error during this process.
I don't want post whole SDM log since it' huge, here is a begin:
20081014132849 Info   :Starting Step SDM-deploy at 2008-10-14 13:28:49.0325 +6:00
20081014132849 Info   :deployment of E:\usr\sap\JTrans\CMS\archives\sap.com~SAP-SHRAPP~SMD_CRM502_C~20081014064901.sca is skipped, because it belongs to the software component (sap.com / SAP-SHRAPP)
20081014132849 Info   :start deployment of archives:http://asu-03-d05:50018
20081014133737 Info   :connected to deploytool via sdm protocol
20081014133737 Info   :The following archives will be deployed (on http://asu-03-d05:50018)
20081014133737 Info   :E:\usr\sap\JTrans\CMS\archives\sap.com~SAP-CRMAPP~SMD_CRM502_C~20081014064154.sca
20081014133737 Info   :E:\usr\sap\JTrans\CMS\archives\sap.com~SAP-CRMDIC~SMD_CRM502_C~20081014064153.sca
20081014133737 Info   :starting deployment
20081014133737 Info   :deployment finished
20081014133737 Info   :Deploy log:
20081014133737 Info   :
20081014133737 Info   :
20081014133737 Info   :
20081014133737 Info   :
20081014133737 Info   :
20081014133737 Info   :
20081014133737 Info   :
20081014133737 Info   :
20081014133737 Info   :Oct 14, 2008 1:28:58 PM Info: -------------------------- Starting deployment ------------------------
20081014133737 Info   :Oct 14, 2008 1:28:58 PM Info: Error handling strategy: OnErrorStop
20081014133737 Info   :Oct 14, 2008 1:28:58 PM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
20081014133737 Info   :Oct 14, 2008 1:28:58 PM Info: Update strategy: UpdateAllVersions
20081014133737 Info   :Oct 14, 2008 1:28:58 PM Info: Starting deployment prerequisites:
20081014133737 Info   :Oct 14, 2008 1:28:59 PM Info: Loading selected archives...
and end of log:
20081014133737 Info   :Oct 14, 2008 1:37:33 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
20081014133737 Info   :Oct 14, 2008 1:37:33 PM Info: ----------------------- Deployment was successful ---------------------
20081014133737 Info   :end of log
20081014133737 Info   :RC of deployment: 0
20081014133737 Info   :The cvers update of sap.com_CUSTCRMPRJ.SMD_CRM502_C.20081014071626 cannot be performed, because thes JSPM data is not configured (no engine URL/user or password).
20081014133737 Info   :Step SDM-deploy ended with result 'success' at 2008-10-14 13:37:37.0117 +6:00
How to deploy properly our application?
Regards, Lev

Hi Lev,
Please ensure that you have mainted the j2ee engine hostname, port number and userid/password details for deployment onto the server.
The same can be checked in CMS --> Landscape configurator -->Runtime systems tab.
Rgards,
Thulasi

Facebook App Doesn't Update Status?

Hey, anyone know why my facebook application on my n97 doesn't update my status? What could be causing this?

Look on the other screens (swipe left). If desired, move it to the first screen.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

The specified application doesn't exist

I update an existing application in the Dev environment with the Copy Application Tool and a user got the following.
The specified application doesn't exist.
Trace: Number:-2147220954
Description:
Source:General Security Error
Page:

Since this issue is related to only one user, this means that the USERPARAMS information for this user is corrupted.
The issue could be resolved by deleting all entries related to this user on this table on the HFM DB.
Kindly open the HFM DB and look for the <application name>_userparams table.
and,
Delete the enteries corresponding to the user.Backup this table prior truncating the table.Please get this operation done by an administrator.
Edited by: user10931567 on 16-Jul-2009 10:03 AM

Pxi: embedded application doesn't launch at boot up

I selected the "Launch application at boot-up" in the "Network options/RT Target:Miscellaneous" menu before creating my application but it still doesn't launch before I open the application on a local machine (the application in the PXI seems to "wake up" then). I checked that the embedded Labview RT is launching at the PXI boot-up, and that the startup.exe has been updated correctly (I checked it with a ftp client).
Any idea about why the application doesn't launch ?

hi there
- first make sure your app dosn't wait for any kind of input.
- there are some hardware - switches to avoid the execution of startup.exe. see the documentation of your PXI-system (for PXI-8186 see page 2-12)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run." What is this all about?? Shall I give up on Firefox?

When I tried to use Firefox this morning I got this message with exclamation marks.
"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run."
What is this all about?? Shall I give up on Firefox?

Sorry to hear that. I understand your frustration and I hope they send back a better working N78-3.
Myself, I count myself lucky. Everything works perfectly for me right now...email, bluetooth, maps, gps, 3rd party apps, battery life, 3G, wifi, etc. etc.
The only issue I've been having is the dreaded reboots but I believe that may have to do with 3rd party apps. I recently uninstalled Google Search app from my N78 and since then it hasn't rebooted or shown any issues. This seems odd at first but makes sense if you think about the fact that the Google Search app loads itself into memory and runs in the background at all times.
I did this this past Tuesday night and so far no reboots, crashes or any problems. I'm sure I just jinxed myself but I've been using it heavily over the last few days with no issues. Prior to this, it would usually reboot every 2 days. If it doesn't reboot for another few days I'll be happy.
I would normally not stand for this but I just love the phone and if I got something else it'd probably be the iPhone 3G which has perhaps more software bugs and issues than the N78-3!!
Best of luck. Here's hoping they release an update soon.

Terminal display doesn't update

I upgraded from 10.6.6 to 10.6.7 last weekend. Since then, Terminal.app doesn't work correctly: I can enter commands, but the window display doesn't update until I click it, so I can't see what I'm typing.
For example, I launch Terminal and a window opens. It is blank. I click it, and my command prompt appears. I enter ls -l, but I don't see what I've typed until I click the window again. I press Enter, but nothing happens until I click the window again ... then the directory list appears.
While writing this note, I also noticed that if I move to another application, the Terminal window also updates at that point. It just doesn't update in real time as I'm running commands.
Has anyone else seen this? And more importantly can anyone suggest a solution?
UPDATE: I just moved my com.apple.Terminal.plist preferences file to the desktop and launched Terminal again ... no problems. Then I replaced the preferences file and launched again ... still no problems. ??? Anyway, it's working for me now, but I'll go ahead and leave this note in case it helps someone else.

There are a few previous threads on this same problem. I would search for:
time AND loosing

SOLVED - Weather App Doesn't Update Live Tile, Xbox (Games, Music, Video) App stuck at "Signing In" Help?

I'm running Windows 8 Pro (RTM -> TechNet). Everything seemed OK the first day of use. Now onto the next day, I can't "Sign In" to any of the Xbox Apps and the Bing Weather app doesn't update its Live Tile with local weather. Other tiles/apps like Finance
appear to be fine.
Event Viewer is reporting:
App Microsoft.BingWeather_8wekyb3d8bbwe!App did not launch within its allotted time.
or
The program wwahost.exe version 6.2.9200.16384 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: b30
Start Time: 01cd7d96ab2036fa
Termination Time: 51
Application Path: C:\Windows\system32\wwahost.exe
Report Id: c736bb20-e98a-11e1-be69-386077604c72
Faulting package full name: Microsoft.XboxLIVEGames_1.0.928.0_x64__8wekyb3d8bbwe
Faulting package-relative application ID: Microsoft.XboxLIVEGames
I am able to sign-in to the SkyDrive App without issue, and the Store App works fine as well. I have tried uninstalling Games, Music, and Video apps and reinstalling to correct the issue, no dice.
My Microsoft Account still signs into this site, my regular Xbox, iPad Xbox App, and Windows Phone just fine. What is up with Windows 8? Thanks in advance.

It appears to end up having been a time sync issue. I must have only been off a couple of seconds?!? I decided to try Armed! and it reported a difference in Time when creating my profile for the game and I was like.. hmmm. So I went ahead and hit Internet
Time settings (under Date and Time in Control Panel) and did a Update Now with time.windows.com. I am now able to login on all the apps I was having issues with before where it was stuck at "Signing In".

Mail application will not update new messages

Mail application will not update new messages

If you have Webmail access you might check that, sometimes a malformed email can clog the system.
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup

Doesn't update iCloud ID

My iPhone 3gS, iOS 6.0.1, doesn't update iCloud ID, while it's done on the others Apple device.
Settings >>> iCloud: I have the previous Id, so iCloud on iPhone does't work.

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

Code doesn't update when uploading new files to website.

code doesn't update when uploading new files to website. I was using an old DW version for a long time then forced to upgrade when I bought my MacBook Pro. Now when I make changes to my pages and link to new files etc on my harddrive, when i upload the pages it won't image because the code still points to harddrive (this did not used to be a problem)... I manually changed the code on the web host site to point to the site and it loaded fine. But now my files on my harddrive also point to the web host files and now don't image on my computer. I never had to worry about this so far and wonder if the new version has a setting I'm supposed to be aware of so that I can design on my hardrive and upload and it knows that the files are being uploaded with it? Ugh hpe this makes sense - I'm NOT a webs designer and the new DW is way more than I use in it's technology.

Hi
This sounds like you have not defined your site in the site definition.
Follow the steps in these 2 tutorials to set-up your site locally and for the remote server -
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt6.html
PZ

TS4083 Is there a way or a setting my folders in Mail to automatically update across all devices? if I transfer an email to a folder for follow-up on my PC, my folder in Mail on my iPhone doesn't update until I actually go into the folder and update manua

Is there a way (or a setting) for my individual folders in Mail to automatically update across all devices? For example, if I transfer an email to a folder for follow-up on my PC - say 10th of the following month - the same folder in Mail on my iPhone doesn't update until I actually go into the folder and update manually. Interestingly though, if I create a new folder on any of my devices they automatically appear on the other devices so it is just the actual contents that I am referring to here. Appreciate any help or guidance.
Regards
Justin

You can turn mail off in the settings but then you can't use it for anything, including the "test" that you want to perform.
Settings>Mail, Contacts, Calendars>Account Name>Mail>Off. That totally turns off the mail account.
As long as mail is turned on and you launch the app, it will look for an download new mail.

How to delete the applications in the "Updates" tab at the lower right part when you open the App Store?

Hi, I bought the new Itouch 5 recently, i'm just wondering how can i delete the applications in the "Updates" tab at the lower right part when you open the App Store? I just want to delete the applications that i've already deleted but it seems that it is still posted at the "updates" tab ad i can't delete it. Please i need your help. Thank you for those who will reply.

Try turning off & on your iPod (sorry if that sounds dumb, but it might work)
Or, since that's a matter of not refreshing, turn off your wifi& reconnect
Hope this helps

My application doesn't update

Similar Messages

Maybe you are looking for