My bb8250 doesn't recognize my password

Hi there, I really hope you can help me with the following. My bb8250 all of the sudden doesn't recognize my password anymore. It all started when I downloaded the BB desktop-manager on my mac. My mac wanted my device-password but didn't recognize it. Then I disconnected the two and now my bb doesn't recognize my password either! To be precize: it does recognize my device-password. But I can not get it of the handheld lock. When I type my password it doesn't show the normal small stars but shows letters where I want to enter cijfers instead of the stars. When I use the alt button to enter the right code my bb doesn't recognize it anyway. I've tried rebooting it by getting the battery out. That didn't help. Now I've only two shots left to enter the right password. I'm trying not to freak out, but it's half a child's life in photo's on there, so I would really really really really like to get into my bb again. Please could you help me out? Thank you so much in advance! Kind regards, K.
Solved!
Go to Solution.

I'm back in! Always thought I had a 4-cijfer-password. I was wrong! I changed each cijfer into the letter on the same key and filled that in as my password and it worked! Yeeeh!

Similar Messages

  • I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...

    I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...
    HELP HELP

    To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
    It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
    The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
    Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
    As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
    Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

  • Computer doesn't recognize administrator password.  How to override or reset?

    Computer doesn't recognize administrator password.  How to override or reset?

    You cannot override but you can chage it, the approach depends on the Mac OS X you are using.

  • Everytime I open my computer it says my server doesn't recognize my password for my account US holidays. How do I do to fix this pop-up?

    Everytime I open my computer it says my server doesn't recognize my password for US holidays. How do I fix?

    Thank you but I guess I wasn't too clear. The link to the bugzilla information is about a very bad update that can NOT be trusted and if you read it the Mozilla folks hard blocked it and took legal action against whomever was sending it out.
    The pop up I keep getting I can not trace who or where it is from. So on two unrelated matters I 1) have this non stop update that keeps popping up and 2) saw an article about a bad Firefox update that had been blocked. I put the two together and thought maybe my pop up was what the article was about and how can I tell if it is malice or a real FF update? Clear as mud now? lol

  • Mac pro doesn't recognize admin password

    Mac pro doesn't recognize administrator password on login, I am using Yosemite and I was using erlier and didint let me log back in password was correct at all times tries to reset password with apple id and still not working. Try disk utilities with terminal and disk is not available, when I updated from maverick to yosemite I didin't set up a disc recovery.

    when I updated from maverick to yosemite I didin't set up a disc recovery.
    There is no need to do anything to set up Recovery. It should have been created and updated automatically on your Boot Drive when you upgraded to Yosemite.

  • I need to install the CC products on a new computer, but it doesn't recognizes my password even when I'm logged in

    I'm an Adobe CC member and need to install the CC products on a new computer. When I download CreativeCloudInstaller.dmg and I double click to install, it requires my password but it doesn't recognizes it even when I'm logged in. Somebody knows what happens?

    Yes! That's the correct answer, you genius! Problem resolved, thank you so
    much!
    2015-04-11 16:02 GMT-07:00 Ned Murphy <[email protected]>:
        I need to install the CC products on a new computer, but it doesn't
    recognizes my password even when I'm logged in  created by Ned Murphy
    <https://forums.adobe.com/people/Ned+Murphy> in *Creative Cloud Download
    & Install* - View the full discussion
    <https://forums.adobe.com/message/7429828#7429828>

  • When I try to set up my gmail account to imap on iphone 4s it says it doesn't recognize my password for gmail

    When I try to set up my gmail account on imap on iphone 4s it says it doesn't recognize my password even though my gmail account works on my computer.

    Try it both with and without the @gmail part.
    At one time it was optional, now Gmail seems to want the entire username.
    If that doesn't fix it, sign out from your computer and and log in again, but type the password to verify it is really correct. There is no mystery to it, Gmail will work with the correct name and password.

  • New iphone 5c doesn't recognize emails passwords, can't set up email accounts

    New iPhone 5c won't let me set up my Gmail accounts, it doesn't recognize my passwords as correct.  Am I missing something?

    Apparently, there is a big delay in syncing to the Comcast mail server.  I just tapped on the email icon and it went directly to the Comcast inbox.  So thanks to anyone who read this and got a chuckle.

  • My mac doesn't recognize my password when I log off

    When I start my computer it recognize my password fine but when I log off or it goes to sleep it doesn't recognize my password anymore and it starts asking for keychains and stuff so I have to shut it down in order to login again, any help?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

    My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

    Okay, I seem to have solved the problem I posted about earlier.  I noticed that the language preference in the upper right hand corner of the screen (between the date and time and the Spotlight icon) had somehow gotten switched from American English to French.  When I switched it back to American English, my password worked when waking the computer from sleep mode.  I have no idea why changing the language preference would affect the way the password works but that seems to have been the case.  I'll post again if I experience more problems.

  • I have changed my apple id but cannot change it  on ipad. My old id comes up with request to log in, but it doesn't recognize my password or birthday. Help please.

    I have changed my apple id on itunes but can't change it on ipad. My old id asks for login but doesn't recognize password or birthday.  Help please.

    Hi on iPad itunes bottom of page Sign out then sign back in with new details. Cheers Brian

  • Error message on Iphoto when emailing says it doesn't recognize email password combination

    I just purchased an updated Iphoto and it no longer will let me email photos because it doesn't recognize my username password combination. How do I fix that

    Try it both with and without the @gmail part.
    At one time it was optional, now Gmail seems to want the entire username.
    If that doesn't fix it, sign out from your computer and and log in again, but type the password to verify it is really correct. There is no mystery to it, Gmail will work with the correct name and password.

  • I am trying to send a picture from iphoto thru sharing with an email but it has an old email address...I changed it but now it says it doesn't recognize the password

    tryin to send a picture thru sharing email from iphoto...it shows an old email i changed it to my current email and when I go to send it says it doesn't recognize the name and password....

    go into keychain and delete the old email address from your keychain (for iphoto). you may want to back up the information if you still want keychain to have a copy of it. so note the password and email or sign in via the web.

  • Looks like adobe messed up.  Unable to install the 'required" upgrade  required because it won't let you view any videos until you upgrade. Doesn't recognize new password that I changed because it didn't recognize my old one!

    I have been trying to install the new Adobe Flash upgrade 17 for most of the day, it didn't want to recognize my password so I went to the web page changed the password and now it still dosen't like the new password.  Anyone have solutions?

    I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
    Today I discovered a new treasure of doggie poop in Lion. No Save As......
    I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
    So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in  mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
    are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
    I am starting to believe that Apple is Satan.

  • Nity wireless router under Yosemite 10.10.1. Doesn't recognize the password.

    My HP Envy doesn't recognice the password to the Xfinity wireless router.   Used to work prior to Yosemite.

    Hello @Suntorygr and welcome to the HP Forums!
    I'd like to help, just curious, are you referring to an Envy printer or computer? Can you please let me know the full name of whichever it is (Example: Envy 4500, Envy 15, etc.)? Thanks!
    Until I know whether you're referring to a printer or a computer, the best I can suggest is to power cycle your network/devices. To do this, turn off the Envy and the Mac. Once they shut down, pull the power cord from your router for 30 seconds. Once it's plugged back in and has all the lights back to normal turn the Mac and the Envy back on and try connecting again
    Hope to hear back from you soon!
    In support of Movember
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

Maybe you are looking for

  • "your system hasn't been modified..."

    I wish I knew what this meant.  When this whole thing started I was simply trying to update to iTunes 10.5.  Everytime I did I would get a message telling me errors occured (exactly what it said, nothing specific given), and if it keeps happening to

  • Crystal Reports Design Documentation

    Does anyone have a good MS Word template for documenting a Crystal Report design? Fuskie Who keeps reinventing the wheel with each contract but can never settle on a good layout...

  • IPod green/gray lines down the middle and they keep growing help!

    have had my iPod touch 4th gen for over a year now and i have these weird gray/green  lines going down the center of the screen. They will not go away when i restart my iPod, and they only started when i came home from school and have kept growing pl

  • Question about clone

    Hi all experts, My customer EBS version is 11.5.9 He follow note 230672.1 to clone PROD to TEST. Pre-clone were completed without issue and TEST db is up and running now. However, when run adcfgclone.pl appsTier, system didn't ask for database server

  • Unwanted zoom in safari: is there a fix?

    In Mavericks on a 2 year old iMac, Safari sometimes spontaneously zooms, disrupting work on screen. Is there a fix?