My Bookmarks Created in Word 2013 Dont Display in Microsoft Reader

I created some bookmarks in my Word 2013 file and I saved it as a pdf. I re-opened the file and when i open the Bookmark diaglog box my bookmarks show in the list. When I select one and click 'go to' it navigates to the book mark.
However when i open the pdf in Microsoft Reader, I dont see the bookmarks. I right clicked the document, selected more options and the only options that show are rotate and info.
Why can't I access the bookmarks in the reader?
Keith Aul

Hello again,
After working on my problematic document some more, I believe I’ve found the cause of the issue.
@Microsofties – I think this one is either a bug or a dodgy OOTB template…
I noticed that the high CPU usage only seemed to occur when the document’s footer was displayed. Experimenting with some careful scrolling and zooming to hide footer (without actually using the “hide white-space” option) seemed to confirm this so I investigated
the footer a bit more.
My document was using the standard Word “Facet (Odd Page)” footer template with a couple of fields added to suit my needs, namely “Publish Date” and a page number.
The template seems to be structured such that the content of the footer is inside two nested text boxes (one inside the other). I also noticed previously that this footer template also appears to “jump” up each page and back down again as I scrolled.
So I deleted the footer and its text boxes, and recreated the same content, in the same position (using the standard paragraph alignment tools) by hand without the nested text boxes. This has, so far, fixed the issue!
I also noticed that the CPU usage dropped right down to idle the moment I deleted the nested text boxes.
Altogether, this leads me to conclude that the “Facet (Odd Page)” footer template in Word 2013 is the source of my issue. Specifically, I believe that the use of nested text boxes in this template causes Word’s interactions with the .Net 4.5 WPF to go a
bit nuts, as evidenced by the infinite loop of request for the non-existent “Avalon.Graphics” WPF registry key I mentioned previously.
It would be nice to see some feedback on this one, Microsoft people, if only to know if this is actually a general issue or is specific to my document!
Thanks, Chris

Similar Messages

Bug Report: Original image location sometimes displayed in PDF created with Word 2013

I found a non-critical security bug in Office 2013.
Here is the issue:
If you drag and drop an image into Word 2013 (I'm using x64 version in Windows 7 if that matters) and then save as PDF (using the default settings) it saves the full file path of the original file in the PDF such that the full path name gets displayed when
you hover over the image. I've only tested this in Adobe Reader XI. If you use the Insert Picture method then this does not occur.

I found this posting as I have now "rediscovered" this issue. I came to the same conclusion - edit ALT TEXT for every image.
However, I think it is confusing that these paths of image file are not considered Personal Information that can be removed using the Inspect Document feature (I tried - was not successful). The list of things to be removed using this wizard is quite extensive
- and some of them less visible than these file paths.
It would be interesting to know if this is going to change with future updates of Word. Why is an ALT TEXT included at all per default? I think using the file path in ALT TEXT should be made optional. Is there a way to turn off this default embedding of
the full path?
As the OP I also used Office 2013 on Windows 7 64bit.
Elke

PDFs load, I can see the status bar fill up, but dont display, Using Adobe Reader X on XP

Upgraded to Firefox 4, using windows XP abd Adobe X reader. PDFs load but dont display, followed the instructions but did not help

Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.

Word 2013 - restrict formatting

Hi
I have a template created in Word 2013 where I want to restrict what people can to with it. The document is set out as a table. I want to make sure that the font is always Arial and the size is always size 10. No changes can be made to these. Also, as the
document is set out in table format, I don't want people typing in too much and it changes the size of the cells. How can I set a character limit?
One final question - I have a series of cells with a tick symbol in, I want people to be able to remove the ticks from the relevant boxes.
Any suggestions?
Viv
Viv Haig

Hi,
Based on my test, please try the following workaround:
1. Set the Arial font and the size was default
Press Ctrl+D>Choose font and size>Set as default
2. Click the Layout tab> Set a fixed Height and Width value>Auto Fit> Fixed Column width
After that the table is fixed, and if type more letters than 10, it will not display.
3. Add protection to a template
http://office.microsoft.com/en-gb/word-help/add-protection-to-a-template-HA010030757.aspx
The article also applies to Word 2013.
To your other question, where did you have a series of cells with a tick symbol in Word file or Excel file? We could try to use Replace function, type the tick symbol and replace all of them to blank.
If I misunderstand, please let me know and give me more information.
Thanks,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Sample Word 2013 documents in Arabic, Chinese, Hebrew, Japanese, & Korean?

Hi;
Can someone (actually 5 someone's) please post a sample docx file where it has just a line of text in Arabic, Chinese, Hebrew, Japanese, or Korean and is created in Word 2013 where Windows & Word are both the local version for Arabic, Chinese, Hebrew,
Japanese, & Korean.
Please don't set any formatting. Have it be the default font, style, etc. I want to get what Word uses as the default for all settings for each language. For Chinese, if possible, one from PRC and one from Taiwan.
Thank you - dave
Who will win
The Windward International Collegiate Programming Championships?

Hi,
Due to the limitation of my resources here, currently I'm not able to do the same with other languages, I really apologize if I brought you any inconvenience.
As I mentioned in another post, the default fonts depend upon the version of Office, they change in different versions:
http://social.technet.microsoft.com/Forums/en-US/f4615e44-8804-4ba4-bab7-1e76513e2d15/what-is-the-default-font-for-cjk-bidi?forum=word
The results I got about Simplified Chinese and Traditional Chinese were from Office 2013, Windows 8.1, both local versions.
Actually the default font can be set easily, I hope this can be a little helpful:
http://support.microsoft.com/kb/291291
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Printing a Word 2013 file to a PDF, which prints the PDF, but when printing the gereated PDF to a laser printer an error occurs: Error: invalidfont Offending Command: show Stack: ( )

I was wondering if any else has had an problem with error codes printing PDF that has been generated from Word 2013 to Acrobat Xi Pro. I have converted fonts from local install to common fonts - Arial, and the same error occurs.
Help!

Thank you Bill,
you maybe right, there seems to be a localised issue as the PDF that has been created from Word 2013 can be printed, on the same printer I am using, by other members on the server with different versions of PDF.
Still stuck though.

Bookmarks are not automatically creating based on Word 2013 Table of Contents.

Bookmarks are not automatically creating based on Word 2013 Table of Contents. In older version of Word, the Style built Table of Contents converted into Bookmarks when PDFing.

I figured it out. There is a new checkbox you must turn on in Word 2013 when export to PDF that allows it to convert items to Bookmarks when PDFing.

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error w

I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error writing to file: c:\Config.Msi\feea.rbf. What do I do?

Hi Beverly ,
Please refer to the following and see if this helps.
https://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
Regards
Sukrit Dhingra

Can a Hyperlink be created in Word to open to a specific PDF bookmark?

I'm learning to create & use PDF files so excuse my newbiness...
I want to create a Word document (eventually converted to PDF) with a Hyperlink so that it opens a separate PDF file and immediately position to a particular Bookmark.
I am able to create a Hyperlink in Word which opens the PDF file in Adobe reader, but I don't know how to position to a particular Bookmark in the PDF file.
Is this possible?
TIA

A Word Hyperlink to a PDF can only provide, in the PDF made from the Word file, a link to the PDF file.
A Word Hyperlink to a Word bookmark that is in the Word file becomes a viable link in the output PDF (if Adobe PDFMaker is configured properly).
A Word Hyperlink in a Word file (Doc1) to a bookmark in a different Word file (Doc2) will be a link to the other file only when Doc1 is processed to create a PDF.
A Word cross-reference, to something in the Word file, that has the 'use as/show as hyperlink' feature selected will be a viable link in the output PDF.
With proper configuration in Word and of Adobe PDFMaker a Word generated TOC (for the open Word file being worked) can result in viable links in the output PDF.
Once you have the PDF you can use Acrobat's Link tool to developed more refined links.
fwiw - In context of setting up more refined links within a document and between documents much more can be done with FrameMaker & InDesign than with Word.
Be well...

ODT file images not displaying correctly in Word 2013

When I open an ODT file in Word 2013, the images appear "grayed out". I must click on each to reset them to automatic color. This only happens in mine, when I send the file to others, the images display fine. I am thinking it is some sort
of setting in word, but can't figure out what.

Hi,
Does this happen to all ODT files or a certain one?
As an initial troubleshooting step, please try to open Word in safe mode and try again:
Type winword.exe /safe in Run
dialog (Press Windows key + R)and hit Enter, to start Word in safe mode.
Office Safe Mode will help to determine if there is any add-ins caused the issue.
Thanks,
Ethan Hua CHN
TechNet Community Support

How do i get the acrobat tab to display in Word 2013?

how do i get the acrobat tab to display in Word 2013?
i have Adobe Acrobat 11 Pro for Windows. In Word, it's in the Add-Ins area, and set to display at startup, but it doesn't.

Are you running at least version 11.0.1 of Acrobat? Have you checked to make sure the add-on isn't on the disabled list for Word 2013? This is done under the Word Options button.
In the categories pane, click Add-ins.
In the details pane, verify that the add-in appears in the Disabled Application Add-ins list. The Name column specifies the name of the assembly, and the Location column specifies the full path of the application manifest.
In the Manage box, click Disabled Items, and then click Go.
Select the add-in and click Enable.
Click Close.

How to copy one user-created Group from one tab to another tab in word 2013 Ribbon

hi Friends
in Word 2013 Ribbon, i have created a customized Tab & a customized Group within it which contains some stuff.
i need this Group & all its contents be copied also to another tab (for example Home tab).
is there any workaround to copy it to another tab?
i know i can customize the ribbon, create new Group, find each desired item & add each one to group... but i don't want to do this method because is time consuming & is creating from scratch which is not desired
any solution?
thanks in advanced

Hi,
As far as I know, we can only export the entire ribbon and QAT with the build-in Export functionality in Microsoft Office, not just part of it.
However, the exported Customizations.ExportedUI file is a XML text file. We may try to modify the
Customizations.ExportedUI file to achieve the goal. See:
http://msdn.microsoft.com/en-us/library/office/ee704589(v=office.14).aspx
Since it's a development issue to customize the Customizations.ExportedUI
file and we are not experts on such issues, I'd recommend you post a question in the Word for Developers forum:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=worddev
The reason why we recommend posting appropriately is you will get the most
qualified pool
of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
hi Steve
useful
thanks a lot

SharePoint 2013 site coll's created. Home page not displaying for any site collection in farm

SharePoint 2013 site coll's created. Home page not displaying. Same issue for all site coll's in the farm. Done the basic checks. Any Ideas?

Hi lakshita,
Would you please check whether you can go to the page:
http://siteurl/_layouts/settings.aspx page:
http://siteurl/default.aspx page? If so, go to Site Features in site settings page, reactivate the Wiki Page home page feature, check the result.
If not, please check whether there is related information in ULS log and event viewer log file? Does the page shows page not found or other errors? Check whether the site can be opened in other machine?
Thanks,
Qiao Wei
TechNet Community Support

When right clicking on a doc file and choosing create a pdf file....Word 2013 launches and creates problems. We are using Acrobat Pro. Is there a way to turn off this feature in Word 2013?

Is there a way around Word 2013 hijacking Acrobat Pro "create a pdf" process? When right clicking on a doc file and choosing "create a pdf" .......the Acrobat process will beging but then Word 2013 jumps in and creates problems.

That's exactly why it needs to support it... The support means the
application was tested in the supported environment and is known to work
well in it. In unsupported environments you can get all kind of strange
conflicts like the one you're experiencing.
On Tue, Apr 21, 2015 at 7:27 PM, timmm4731946 <[email protected]>

[Solved]Error opening large documents created in Word 2010 in Word 2013

When you open a large
2010 word document in word 2013, it can yield an error of type:
We're sorry. We can't open XXXXX.docx because we found a problem with its contents.
Details:
Operation aborted: max-element-depth constraint violated.
Location: Part: /word/webSettings.xml, Line: YYY, Column: ZZZZ
To fix this error, you have to rename the .docx to a zip file, delete the file Websettings.xml and then rename back to a docx.

To fix this error, you have to rename the .docx to a zip file, delete the file Websettings.xml and then rename back to a docx.
I've been having the same error and this solution worked for me. It seems to be linked to documents built using Mendeley's reference plugin for Word. This issue is mentioned on their support site (here)
and that may be why the issue comes up with dissertations &c. The fix is easy and it works, but I would suggest you do the fix using a
copy of your document. That way if anything goes wrong you still have the original.

My Bookmarks Created in Word 2013 Dont Display in Microsoft Reader

Similar Messages

Maybe you are looking for