Bug Report: Original image location sometimes displayed in PDF created with Word 2013

I found a non-critical security bug in Office 2013.
Here is the issue:
If you drag and drop an image into Word 2013 (I'm using x64 version in Windows 7 if that matters) and then save as PDF (using the default settings) it saves the full file path of the original file in the PDF such that the full path name gets displayed when
you hover over the image. I've only tested this in Adobe Reader XI. If you use the Insert Picture method then this does not occur.

I found this posting as I have now "rediscovered" this issue. I came to the same conclusion - edit ALT TEXT for every image.
However, I think it is confusing that these paths of image file are not considered Personal Information that can be removed using the Inspect Document feature (I tried - was not successful). The list of things to be removed using this wizard is quite extensive
- and some of them less visible than these file paths.
It would be interesting to know if this is going to change with future updates of Word. Why is an ALT TEXT included at all per default? I think using the file path in ALT TEXT should be made optional. Is there a way to turn off this default embedding of
the full path?
As the OP I also used Office 2013 on Windows 7 64bit.
Elke

Similar Messages

  • Odd Display of PDF Created with Pagesn '09

    I create the monthly newsletter for a Macintosh user group, Capitol Macintosh of Austin, Texas (CapMac), using Pages '09. The newsletter is exported from Pages as a PDF and is then made available on the CapMac website <http://www.capmac.org/>.
    A weird problem is that the newsletter displays as intended when viewed in Preview but not when viewed in either Adobe Reader or Acrobat. In Reader and Acrobat some of the included text displays as light gray and not the specified black.
    I've found a weird work-around which is to change, in Pages, the text which displays incorrectly from black(#000000) to a dark gray. (#191919) and then re-export the PDF.
    So, the question is am I dealing with an error in Pages or an error in Reader or Acrobat?
    The version that is posted on the website has three instaces of text changed from black to dark gray. These are on Page 2 (the text between the bluebonnets), Page 7 (the article), and Pages 9 and 10 (the article)
    Many thanks for any thoughts and/or suggestions..

    TaliesinSoft,
    What you are looking at is an effect of color management where the black text has been changed to a cmyk mix that results in a dark grey.
    Why it is happening selectively I can't say, I would have said in the case of the bluebonnet example because it is over the tinted background but then it has also done it on plain white background.
    You could try saving the newsletter to a .ps file and using Acrobat Pro (if you have it) to convert the file to a .pdf using your own selection of color management and distiller settings.
    Peter
    I gather you think that if Frank Lloyd Wright, if he had lived long enough, would have been a Mac User?

  • Reader 11.0.07 does not display content of PDFs created with LiveCycle Designer ES 8.1

    We use some PDFs created with LiveCycle Designer ES 8.1 which do not show any content when opened with Reader 11.0.07, only a blank display area or erratic copies of the screen behind it. Documents look fine in print preview though and also print correctly. Tried to change various security or display settings, no effect. Tried other machines, different hardware, different OS versions (Win7, Win8), same effect on every single device with 11.0.07 installed.
    Any ideas, anyone?!?

    Hi,
    Not sure why you are resolving the node (??), also I would not be inclined to include a period in the object name (.), maybe this is why you are resolving the node.
    Also I don't see in the script where you are calling the instanceManager, in order to use the addInstance method.
    Having said that the problem may be in the File > Form Properties > Defaults tab:
    Check that Preserve script changes is set to Automatic.
    Lastly is the form Reader Enabled? It would need to be for users with Reader to save the changes, including new instances of a repeating element.
    Niall

  • Displaying a PDF file with adf tags

    hello,
    can anyone give me some advice in how to display a pdf file with adf tags.
    many thanks

    http://technology.amis.nl/blog/?p=1182

  • Bug report: A keyboard layout is incorrect on the remote with Japanese keyboard

    This is a bug report for Microst Remote Desktop
    ===================================================
    ## Summary
    A keyboard layout is incorrect on the remote with Japanese keyboard
    ## Version Information, I tested
    * Client
        * Case 1
            * MacBook Pro with JIS106 Keyboard
            * Mac OS X Lion 10.7.5
            * Microsoft Remote Desktop 8.0.24308
        * Case 2
            * MacBook Pro with JIS106 Keyboard
            * Mac OS X Mavericks 10.9.1
            * Microsoft Remote Desktop 8.0.24308
    * Remote
        * Case 1
            * Windows 7 Professional Japanese
        * Case 2
            * Windows Server 2008R2 Datacenter Japanese
        * Case 3
            * Windows Server 2012R2 Datacenter Japanese
    ## Detail of bug
    When login from Mac OS X with Microsoft Remote Desktop, the keyboard layout is always incorrect on the remote.
    The client machine have a built-in keyboard of JIS 106 layout,
    and the primary language is set to Japanese.
    But on the remote, the keyboard layout is US 101.
    So a input of Shift+2 does not result " but @.
    I've seen the above behavior on the 3 remote enviornments described the above.
    This bug did not occcur with Microsoft Remote Desktop Connection Client for Mac 2.1.1, even if the system language is English and keyboard layout is Japanese.
    ## Captures
    I've took some of screen captures.
    I'm sorry for the capture includes Japanese words, so I added description in English.
    Capture 1:
    Mac OS X Keyboard Setting
    Capture 2:
    Windows Server 2012R2 Screen Keyboard
    Capture 3:
    Windows Server 2012R2 Screen Keyboard, with a additional registry key configured.

    This bug also affects the Canadian English settings.  If the client is set to Canadian English with a US keyboard the remote server is setup using a Canadian French keyboard.  Using the language selection in the toolbar you can temporarily correct
    the problem but the keyboard resets to french at the most inopportune times.  The was a problem in the earlier RDP client and was fixed so it's sad to see it reoccur in the new client.
    Lawrence

  • Bug report: A keyboard layout is incorrect on the remote with Hungarian and other "exotic" keyboard layouts

    This is a bug report for Microst Remote Desktop
    ===================================================
    ## Summary
    A keyboard layout is incorrect on the remote with Hungarian keyboard
    ## Version Information, I tested
    * Client
        * Case 1
            * MacBook Pro with HU101 Keyboard
    * Locale: Hungarian
            * Mac OS X Maverics 10.9.2
            * Microsoft Remote Desktop 8.0.6
    * Remote
        * Case 1
            * Windows Server 2003 R2 (English)
        * Case 2
            * Windows Server 2008 R2 (English)
        * Case 3
            * Windows 8.1 (Hungarian)
    ## Detail of bug
    When I connect to the listed remotes the client sets the keyboard layout to Latvian which is a completely different layout than Hungarian (not even close...).
    - On Windows 8 if I set the language on the login screen it stays on that language after the login.
    - On Windows Server 2003R2 and 2008R2 even if I set the language at login it will switch back to LV after the login.
    ## Attachments
    Unfortunately cannot include my shots because I'm not allowed to do this...
    ## End of report
    Please allow the users to set the correct "target" language on connection basis because the automatic method the app use to determine that is unreliable.

    Hi,
    Thanks for the feedback.
    I will forward this to the product team.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Some images do not display on E-Bay with FF 11

    Running Vista. had no problems with E-bay using FF 10 or lower. some images will not display, and when a image that does show in the category, when selected, it does not display. I am running FF11 on my xp machine with no problems.
    every thing on E-bay works with IE

    It's not recommended to go back to Firefox 10 due to known security vulnerabilities. It's still available if there's no other solution.
    Another standard diagnostic step is to try Firefox's Safe Mode to see whether it is caused by a custom setting or add-on.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in [http://support.mozilla.com/kb/Safe+Mode Safe Mode] using
    Help > Restart with Add-ons Disabled
    In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
    If the images load correctly, this points to an add-on or custom setting or perhaps a saved password as the problem. A few things to work through.
    If the site doesn't load correctly, we would have to consider other factors.
    Any luck?

  • Substitution string used in custom Report column name does not display in PDF version of report

    I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system.  We previously used Oracle 10.2, with Apache with a custom fopping document.
    My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report.  When the report is run and displayed, the column headings appropriately display the date.  However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
    Is it possible to use a substitution string in the column heading?  I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
    In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string.  See below for actual display:
    The report column headings in APEX displays correctly (bold is the substitution detail): 
    Fund    Account Description          Balance 07/01/2014     Budget/Goal FY 14-15     YTD Actual 02/28/2015         Ending Balance 02/28/2015
    In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names.  See below:
    In the version of the report that is Printed to PDF I get the following for display:
    Fund           Account Description           Balance %26amp;P347_BEGIN_DATE.     Budget/Goal %26amp;P347_FY.     YTD Actual %26amp;P347_END_DATE.     Ending Balance %26amp;P347_END_DATE.
    Any assistance would be greatly appreciated.
    Thanks,
    Pat

    First, the misspelled word is a test object and not data.
    Second, all data display correctly.
    Third, text object is displaying the old misspelled word.
    Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
    Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
    Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
    Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
    One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
    I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening.

  • My Bookmarks Created in Word 2013 Dont Display in Microsoft Reader

    I created some bookmarks in my Word 2013 file and I saved it as a pdf. I re-opened the file and when i open the Bookmark diaglog box my bookmarks show in the list. When I select one and click 'go to' it navigates to the book mark.
    However when i open the pdf in Microsoft Reader, I dont see the bookmarks. I right clicked the document, selected more options and the only options that show are rotate and info.
    Why can't I access the bookmarks in the reader?
    Keith Aul

    Hello again,
    After working on my problematic document some more, I believe I’ve found the cause of the issue.
    @Microsofties – I think this one is either a bug or a dodgy OOTB template…
    I noticed that the high CPU usage only seemed to occur when the document’s footer was displayed. Experimenting with some careful scrolling and zooming to hide footer (without actually using the “hide white-space” option) seemed to confirm this so I investigated
    the footer a bit more.
    My document was using the standard Word “Facet (Odd Page)” footer template with a couple of fields added to suit my needs, namely “Publish Date” and a page number.
    The template seems to be structured such that the content of the footer is inside two nested text boxes (one inside the other). I also noticed previously that this footer template also appears to “jump” up each page and back down again as I scrolled.
    So I deleted the footer and its text boxes, and recreated the same content, in the same position (using the standard paragraph alignment tools) by hand without the nested text boxes. This has, so far, fixed the issue!
    I also noticed that the CPU usage dropped right down to idle the moment I deleted the nested text boxes.
    Altogether, this leads me to conclude that the “Facet (Odd Page)” footer template in Word 2013 is the source of my issue. Specifically, I believe that the use of nested text boxes in this template causes Word’s interactions with the .Net 4.5 WPF to go a
    bit nuts, as evidenced by the infinite loop of request for the non-existent “Avalon.Graphics” WPF registry key I mentioned previously.
    It would be nice to see some feedback on this one, Microsoft people, if only to know if this is actually a general issue or is specific to my document!
    Thanks, Chris

  • Two page display of pdf created in InDesign CS4 js

    Hi, I need to set page desplay for pdf created in InDesign to two page view and I couldn't find anything like that in OMV. I assume it will be setting preferances for Matadata. Would you be able to help me.
    Thank you.
    Yulia

    @Yulia:
    You can set all "open"-options with Acrobat Pro and you can automate this with a batch process under "Advanced => Document Processing => Batch Processing".
    Also there is a way to do that through pdfmark instructions inside a placed EPS. Documentation for doing a "Two-Up (Cover page)" with pdfmarks is not available in the pdfmarkReference_v9.pdf for the PageLayout-tag. And of course you have to use Distiller to get the pdfmarks working, no chance doing that trick with PDF export.
    Here is the pdfmark-code for an EPS you can work with (found and adapted it from the "PostScript & PDF-Bible" by Thomas Merz and Olaf Drümmer):
    %!PS-Adobe-3.0 EPSF-3.0
    %%BoundingBox: 0 0 72 72
    %%EndProlog
    /pdfmark where {pop} {userdict /pdfmark /cleartomark load put} ifelse
    [ {ThisPage} << /Trans << /S /Dissolve >> >> /PUT pdfmark
    [ {Catalog} << /PageLayout /TwoColumnRight >> /PUT pdfmark
    %%EOF
    Save the code as a plain text file with the ".eps" suffix. Place it on any page you want to print of your InDesign layout, write a PostScript file and distill it to pdf. You should get a "Two-Up" view when opening it in Acrobat.
    Meanwhile (after doing a little research on the web) it seams that all possible "/PageLayout" parameter pairs are indeed documented, but not in the pdfmarkReference_v9.pdf, but in the PDF32000_2008.pdf on page 73:
    SinglePage     Display one page at a time
    OneColumn     Display the pages in one column
    TwoColumnLeft     Display the pages in two columns, with odd-numbered pages on the left
    TwoColumnRight     Display the pages in two columns, with odd-numbered pages on the right
    TwoPageLeft     (PDF 1.5) Display the pages two at a time, with odd-numbered pages on the left
    TwoPageRight     (PDF 1.5) Display the pages two at a time, with odd-numbered pages on the right
    Default value: SinglePage.
    Uwe

  • Bug report: import image failure

    When I try to import images (formatted as either .gif or
    .jpg) some fail to load and a blank outline of the appropriate
    dimensions appears. Images that fail to appear have been set to
    grayscale and/or RGB, and have a file size less than 200 KB.

    We are currently investigating this issue and will update
    shortly.

  • Image is not displayed in APEX Form with APEX utility Function

    Dear APEX experts,
    As i am new to the oracle apex development. I have just created the basic employee information form in which i upload the photograph of the employee. The photograph gets uploaded but it does not display properly. I have already referred the sample database application to display the image. Moreover, i have followed the same steps as it is used to display the product image in that application. Still i am unable to get result. I am getting following output:
    <img src="apex_util.get_blob_file?a=35682&s=101496289174102&p=15&d=10639237623242912156&i=10639236703270912154&p_pk1=21&p_pk2=&p_ck=FCA12832591A1C706D76FDD589E551A2" />
    Please help me seniors to solve this issue. How to display the image using this utility.

    mehpandya wrote:
    I have observed following HTML code after inspecting the two application.
    1.Sample Database application:
    In this application , the product image is uploaded and displayed correctly and following code is rendered in the HTML source.
    <span id="P6_IMAGE" class="display_only" ><img src="apex_util.get_blob_file?a=64703&s=134073736366663&p=6&d=25732916709090782422&i=25433760606377189086&p_pk1=1&p_pk2=&p_ck=7E23190CC0BFE98BBE4CCE2ADFBBEF26" /></span>
    2.Sample HRMS Application - Which i have created for learning.
    In this application , the employee photo is uploaded but it is not displayed correctly. Following is code is rendered in the HTML.
    "<span id="P15_EMPIMG" class="display_only" >&lt;img src="apex_util.get_blob_file?a=35682&amp;s=100541516379272&amp;p=15&amp;d=10639237623242912156&amp;i=10639236703270912154&amp;p_pk1=21&amp;p_pk2=&amp;p_ck=31A8328E0F5754D7CBD0FC0C6313B38A" /&gt;</span>"
    Hence , in my application the code is not rendered perfectly and syntax is not completed.
    following characters are rendered like this.: &lt , &quot , &gt , &amp.
    So, is this the reason of not displaying the image???Yes.
    To get a Display Item to render as HTML, in the item definition Security section set Escape special characters to No.
    For a report column, ensure the Display Text As report column attribute is Standard Report Column rather than the default Display as Text (escape special characters).
    Use a Display Image item and declarative BLOB support instead of this clunky manual method.
    Please read the FAQ and forum sticky threads (if you haven't done so already.
    You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s)
    The APEX documentation is here.

  • Images won't display on my webpages with Rapidweaver 5

    For some reason I can't see any pictures on my website once it's published onto my website. The pictures won't load on my website. At first I thought that there was a conflict with my APPS because i have other APPS on my Mac too. So I've formatted my hard drive and restored my computer to factory default  and reinstalled Rapidweaver from the app store before installing any other apps. So there was no other apps I've installed on my Mac. Rapidweaver with the first apps I've installed. I didn't even install any themes or add-ons and I was still having problems viewing my images on-line.
    Well…still having the same issue regardless if I'm using a third party add-ons or from Rapidweaver. I have a Macbook Pro 2012. Everything is currently updated. I've checked updates for your softwares and plug-in. I've paid a lot of money buying themes and plug-ins. Over $200 buying themes and plug-ins before knowing that I can't view my pictures on-line. I'm a teacher. I have multiple domains. I was using Sandvox to design my websites before purchasing Rapidweaver.
    Since I've purchased Rapidweaver Version 5.3.1. I've been testing your softwares on www.jwmien.uni.me and www.mien.uni.me. These two site are my test sites for RAPIDWEAVER.
    Can you please help. I really don't want to flush $300 down the toilet. I bought RapidWeaver, Nick Cates Design themes for $99 and not to mention tons of plug-in such as Blocks, Stacks 2, collage and many more.
    So I feel sick to my stomach because I can't see the view any images on my webpage using Rapidweaver. The picture on my computers are standard jpeg images. These jpeg images are taken from the same digital camera. I am able to view these jpeg format when I was using Sandvox to publish my website.
    PLEASE! PLEASE HELP! Crying for help.
    Hardware Overview:
    NOT RETINA Display
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro9,1
      Processor Name:          Intel Core i7
      Processor Speed:          2.6 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          16 GB
    System Version:          OS X 10.8.3 (12D78)
    This is the same message I sent to Rapidwaver support and they still haven't gotten back to me about any fixes yet.

    For some reason I can't see any pictures on my website once it's published onto my website. The pictures won't load on my website. At first I thought that there was a conflict with my APPS because i have other APPS on my Mac too. So I've formatted my hard drive and restored my computer to factory default  and reinstalled Rapidweaver from the app store before installing any other apps. So there was no other apps I've installed on my Mac. Rapidweaver with the first apps I've installed. I didn't even install any themes or add-ons and I was still having problems viewing my images on-line.
    Well…still having the same issue regardless if I'm using a third party add-ons or from Rapidweaver. I have a Macbook Pro 2012. Everything is currently updated. I've checked updates for your softwares and plug-in. I've paid a lot of money buying themes and plug-ins. Over $200 buying themes and plug-ins before knowing that I can't view my pictures on-line. I'm a teacher. I have multiple domains. I was using Sandvox to design my websites before purchasing Rapidweaver.
    Since I've purchased Rapidweaver Version 5.3.1. I've been testing your softwares on www.jwmien.uni.me and www.mien.uni.me. These two site are my test sites for RAPIDWEAVER.
    Can you please help. I really don't want to flush $300 down the toilet. I bought RapidWeaver, Nick Cates Design themes for $99 and not to mention tons of plug-in such as Blocks, Stacks 2, collage and many more.
    So I feel sick to my stomach because I can't see the view any images on my webpage using Rapidweaver. The picture on my computers are standard jpeg images. These jpeg images are taken from the same digital camera. I am able to view these jpeg format when I was using Sandvox to publish my website.
    PLEASE! PLEASE HELP! Crying for help.
    Hardware Overview:
    NOT RETINA Display
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro9,1
      Processor Name:          Intel Core i7
      Processor Speed:          2.6 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          16 GB
    System Version:          OS X 10.8.3 (12D78)
    This is the same message I sent to Rapidwaver support and they still haven't gotten back to me about any fixes yet.

  • Images don't display in PDF read in iBooks

    I subscribe to a scholarly journal that is distributed in PDF format.  Lots of photographs, illustrations, diagrams.
    If I open them on my desktop everything displays fine.
    If I open them on my iPad, using iBooks (my preferred reader for this purpose) or iAnnotate or Docs to Go, the document opens fine.  The pagination and formating is fine.  But there are NO images (including ads).  I just have text and white space anywhere an image would be.  Any ideas?

    Sorry, no go.  I get the same results with GoodReader as in iBooks, Docs to Go and iAnnotate: perfect pages minus all photos and graphics.  (And I have confirmed that photos and graphics appear properly in PDF on the desktop.)

  • Bug? Error when using Alternate Display for a preso with Build transitions.

    I was working on a preso and Alternate Display worked fine for a while when I'd play the presentation. Then I added some Build transitions and when I tried to play the presentation, I started getting this error:
    *Keynote cannot play your slideshow because an error occurred.*
    I restarted Keynote and created a new presentation. Alternate Display worked fine when I just had a couple of plain test slides. Then I added a Build to a set of bullet points and started getting the error again.
    Is this a known bug? Any way to fix it? Is it caused by something else?
    System Version: Mac OS X 10.6.4 (10F569)
    Chipset Model: NVIDIA GeForce GT 330M
    Model Name: MacBook Pro
    Total Number Of Cores: 2
    L2 Cache (per core): 256 KB
    L3 Cache: 3 MB
    Memory: 4 GB

    Certainly not a known KN bug, but might be an expression of the NVIDIA problem referred to here: <http://www.macrumors.com/2010/09/29/nvidia-class-action-settlement-for-macbook -pro-owners/>. Given your expertise and your hardware, that'd be my first guess. Barring that, you have to line up the usual suspects: corrupt pref file, corrupted app, etc. Have you been having any other problems/strange behavior either with KN, with other apps, or with your Mac generally? What, if any, software maintenance/repair have you tried/do you do routinely?

Maybe you are looking for