My circuit goes convergenc​e error and it is not simulating

hi!!!
im simulating this circuit...
then it just went to convergence error!!
and i alow it to solve it but it only consumes time and it cant fix the problem!!
the error came when i reset the display circuit!!!
can someone help me with this matter??
 by the way im using circuit design suite 10.0.1!!
gud day!!
Attachments:
experiment ckt Vr1.ms10 ‏229 KB

O.K. I am going to tackle these as I get a solution for you or an explaination compiled.
1. I did manage to get the circuit simulating for the full time without convergence error. What I did was to take all the Analog components off of VCC and run them to the analog DC Power. I have found on a number of occassions that it is best to separate the analog components from the digital power sources and run them to their own DC Power Source to prevent problems when simulating. For some reason when you hook analog and digital components together on the schematic the simulator likes for each to be coupled to its appropriate power source otherwise it starts coughing up errors. As far as real time is concerned that is not possible with Multisim. You can get close, but you run the risk of timestep too small errors. It takes the simulator time to number crunch and it can't do that very fast. The larger the circuit the more real time it takes to simulate. On very large circuits it may take 1 minute of "real time" to simulate 1 second of circuit time. Basically it is the nature of the beast and there are very limitied options available to speed it up without it spitting errors at you. I will post the updated circuit for you to try.
2. DRC errors do not effect simulation. They are user adjustable and only there to advise you that, according to your settings, you have a wire connected where you didn't want it connected i.e DC voltage on a timer output. You can turn these on or off by going to TOOLS>ELECTRICAL RULES CHECK>ERC RULES and disbling the ones you want by turning them from red to green by clicking on the square.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day
Attachments:
experiment ckt Vr2.1.ms10 ‏200 KB

Similar Messages

  • I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    I keep getting download error and it does not want to download.  I tried deleting anything that might have creative suite links and reloading but I keep getting the same error message.

    Well... what IS the error message?
    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.

  • TS2167 I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

    I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

    Where are you publishing to?  Can you publish successfully to a folder on your hard drive? Have you read this webpage: Publish iWeb site using FTP. It may have a clue to where the problem is.
    A quick troubleshooting fix is
    Try the following:
    1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iWeb's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
    3 - launch iWeb and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    However, when you delete the preference file you probably will have to use the app described below to select and open your domain file with iWeb:
    In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • When i redeem my code it keeps saying error and that its not properly activated what do i do?

    when i redeem my code it keeps saying error and that its not properly activated what do i do?

    Ask the people at the store the gift card came from or the iTunes Store staff for assistance.
    (107049)

  • Adobe error and we could not able to solve this

    If we select a single item in the comment field, multiple edits were selected in the page. Please refer the attached screenshot. Number 1 and 2 indicates the edits that highlights when we select 1 item in the comment field which is indicated by number 3. It seems Adobe error and we could not able to solve this.
    Could you please kindly do the needful and let us know your comments?
    - Mohamed Sathakathllah
    Message was edited by: uamsathak

    Read this:
    http://forums.adobe.com/thread/931829

  • I was changing my desktop screen saver in system preferences screen protection.  Now it says it is "Loading Images" and won't stop.  The Colourful wheel goes around for ever and It does not stop. Can anyone help me?

    I was changing my desktop screen saver in system preferences>screen protection.  Now it says it is "Loading Images" and won't stop.  The Colourful wheel goes around for ever and It does not stop. Can anyone help me?

    Welcome to the Apple Support Communities
    I have seen a lot of cases like your issue, and it's easy to solve.
    First, open Disk Utility, select Macintosh HD in the sidebar and repair permissions. Sometimes, a permission can be damaged and it makes that an application doesn't work properly.
    If that doesn't work, open Finder, select Go menu > Go to Folder, type ~/Library/Prefereces, delete "com.apple.desktop.plist" and "com.apple.systempreferences.plist" and restart

  • So I downloaded the film step up .. but now it says error and it's not loading what can i do ?

    I bought the film step up.. but now it says error and it's not downloading anymore.. what can i do ?

    My guess is that they recently changed how the videos work. I logged in on my MacBook and the stream worked fine, but it is Flash content in a JW Player video player. From what I see on the website. This video player works with html5 as well as Flash so I'm not sure why it isn't working, unless the site has not updated the content for html5 and is only using Flash right now. But you should get the message on the iPad that the content is in Flash and can't be viewed on the iPad.
    I tried it with three different browsers identifying as mobile and as desktop browsers and I get the same results as you no matter what I do. So my assumption is that the site content was recently changed and it has to be updated. But that is just a guess.
    The message about the website having issues when I used iCab Mobile and identified as a desktop browser. The issue has to be on their end.

  • Bios not install error and Raid Configuration not showing physcial HDD in Lenovo

    Is this a SATA hard drive by any chance?  Sounds like you have an Adaptec SCSI controller, but no hard drive attached to it.  Are you booting an install DVD of some sort?

    Bios not install error and Raid Configuration not showing physcial HDD in Lenovo RD 120 Server (New)
    updated bios still same error
    and at array configuration it is not showing any hard disk
    hard disk utility it is showing hard disk 
    we are trying to install OS with single hard disk in Lenovo RD 120 Server
    This topic first appeared in the Spiceworks Community

  • While updating to ios7 there was an error and it did not restore my phone, now when i try to restore i get a message i tunes could not restore because back up could not be saved

    I was updating my phone to ios7 and due to the lead being pulled it failed during restore, it has ios7 on the phone but everytime i try to restore it so all my pics, apps, music etc is on the phone i get the error message itunes could not restore because back up could not be saved. please help, im using windows xp

    Hello agardner37701,
    I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode.  I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When installing adobe reader on my mac it states that the installation is complete, but on same screen it states the there is an internal server error and reader will not work

    when installing adobe reader on my mac it states that the install is complete, but on same screen its sets thaw an internal server error has occurred and reader will not work

    Hi,
    I have exactly the same problem on one of my Macs (MBP 15 Mid-2010 / OS X Yosemite): Both reader and Acrobat Pro download without a hitch. Both also install with no problem.
    But once you click the program to open, they both return "an internal error occurred".  
    I tried downloading three separate copies, and still get the same error message when I install and launch.  I've also uninstalled the previous installations via CleanMyMac2 to make sure it's no longer in the SSD.  Same results.
    Am using a new SSD as internal boot drive, with fresh / clean installation of OS X and Apps (previous internal HDD crashed) -- And am seeing errors not only with Acrobat, but also with LR5 which always comes up with a "An error occurred when attempting to change modules" -- inspite or uninstall, download and reinstall.  Not sure if it's a registry issue? (Not even sure if that's the case with OS X).
    Do I need to reformat the whole SSD? I hope not!
    Thanks
    Edwin

  • Getting a Firewire error and iPod will not go to sleep now

    Has anyone received this error before? My husband plugged his iPod into our PC for charging. After iPod showed charged on the screen, he unplugged it then got the firewire connection error and iPod will go into sleep mode so will not hold a charge now. If anyone has any fixes for this, please let me know.
    Thanks,
    Kim

    I've used some needle nose pliers and i thought i had fixed them, yet I still receive the error when plugged in. I think i see a few pins that are bent backwards/broken in half. So i guess it's not repairable by my means, but am i able to go to an Apple store and maybe get some help? I mean, it's just bent pins in the dock connector; I would think they could help with that for maybe a small fee, yeah?

  • "Open In Excel" button inside the Xlviewer.aspx page return Error and I can not open excel using local office

    Inside the xlviewer.aspx page when I click on "Open In Excel" at first I receive this Error: 
    Some files contain viruses that can be harmful to your computer. it is important to be certain that this file is from a trustworthy sourceDo you want to open this file?
    Then, When I click on Yes, the second error message(below) shows and I can not open Excel using my local Excel Application.
    This action couldn't be performed because office doesn't recognize the command it was given.
    I should notice that the application is published under the HTTPS protocol.
    It is just working with IE 9.0. Neither Chrome nor IE after 9.0.

    Sure. I posted here since I suspect that the lastest upgrade may have a bearing on it.
    What do I need to move it over to Number and Lion?

  • HT203176 My start up disk (10.6.8 ver) has errors and I do not have the OSX install disk. How can I fix this and repair the disk?

    Start up disk needs repaired. Repair Disk button is not available in disk utility and I do not have the OS install disk as recommended to fix. Any suggestions?

    You have two choices, either get a replacement install DVD for your Mac ( best choice) or make another disk a system disk.
    Option 1 call Apple and request a replacement install DVD for you Mac. They will charge you a nominal fee for shipping and handling. You really should have that because it is considered part of your Mac.
    Option 2 This one depends on exactly what kind of errors you have on the disk.
         If the data is recoverable, you can clone to the other drive.
         If not, then you are in trouble and need the install DVD to install an operating system.
    Allan

  • I competed updating my ipad2 to ios6. I have 11 apps which has updates I need to perform. But, the procedures of 'agree' and update keep going in a loop and I was not able to update any of the 11 app I need to update. Why the up date procedures keep loopi

    I completed updating my iPad2 to ios6. I hv 11 app which need to be updated and these are flagged. But the updating procedures keep looping itself and I was not able to update any of the 11 app.? Why the update procedures keep looping and how to get out of it.

    Okay - let's cut to the chase...
    If the Menu Bar (File, Edit... Help) shown in my screenshot below is not visible, use CTRL+B to display it. Then click on Help/Check for Updates. If one is available, you will be able to select it at this time.
    Note the item at the bottom of the list; About iTunes. Selecting that will show you which version of iTunes you are using.
    An alternative method to display the Menu Bar is click on the box in the top left of your iTunes window...

Maybe you are looking for