My custom component works great in cs5 but cast a #1009 error in cs5.5!

Hello,
some time ago i made a very useful component in flash cs5 called TimelineLoading:
you can drag it from the library to the stage and set some properties in the inspector (CIRCLE or BAR loading, color, size, etc...).
It does the loading of your timeline, showing the progress in a very nice way, and then goes to frame 2 when loading ends.
It has always worked perfectly, but now, when i try to use the exact same component in Flash CS5.5 it throws a 1009 error, even before starting anything.
here is the error: Error #1009: at MainTimeline/__setProp___id0__Scene1_Layer1_0()
you can find the component here:
http://code.google.com/p/riccardosallusti/downloads/detail?name=TimelineLoading_1_2.mxp&ca n=2&q=#makechanges
install it with the Extension manager, then drag it to the stage on frame 1, place a big image in flame 2 with a stop(), change the loading type to BAR in the inspector, and then publish.
note: leaving the default loading type to CIRCLE, does not throw any error but the loading doesn't work.
If you try it in cs5 everything works fine.
Thanks
P.S. tried on Windows 7 and MAC osx 10.6.8

I tried that but I keep getting this error message:
VerifyError: Error #1053: Illegal override of createGeometry in flashx.textLayout.elements.FlowGroupElement.
ReferenceError: Error #1065: Variable _11f1d66f38eb234da07a684678bb07c1e6cff9d15441f91af33073b7534701e8_flash_display_Sprite is not defined.

Similar Messages

Pop-ups (custom animations) work in PPT presentation, but don't in published presenter PDF

Pop-ups (custom animations) work in PPT presentation, but don't in published presenter PDF. I created a file in PowerPoint 2003 that allows the user to click on words in a graphic and have definitions of the word pop-up. This only works in the PPT presentation, it does not work when I publish the file to PDF using Adobe Presenter, version 7.0.5, build 7588. Any suggestions?

MKO,
That's not entirely surprising. Unfortunately, what you're doing cannot be replicated or executed properly in Presenter content, because trigger functions are essentially Active X controls native to the PowerPoint environment. And that's the problem: Active X commands are totally ignored when your deck is converted during the publishing process.
So what to do?
You have 2 options, and neither are "clean" solutions because each represents a bit of homework.
Scenario 1: what you could do is create a series of hidden slides that are associated with / correspond to each of the text elements you have on the first slide. You'd have to assign hyperlinks to the text boxes and then point the hyperlinks to the associated hidden slide. The upside here is that if you have to edit any content after-the-fact, is that you can conduct such edits directly in PowerPoint. But there is a drawback too; namely, that if you have to keep track of slide views, hidden slides are not tracked at all by LMSs (including Adobe Connect), so you'd have to come up w/ a formula for counting the number of visible slides so your presentation will mark a "complete" on the LMS.
Scenario 2: create a Flash interaction that effectively does the exact same thing. The drawback to this I hope is obvious: if you have any content edits, then you're forced to edit the file directly in Flash. The good news here, however, is that this solution only requires one slide, so you can effectively keep track of slide views if that's something you need if the course is deployed on an LMS.
Again, perhaps not ideal, but the above does represent alternative solutions to what you attempted to do in your sample deck.
Rob
http://www.robrode.com/yabb/

HT4623 Iphone 4s works great most everywhere but at home.

Hello All, I have two iphone 4s that work great most everywhere but home thru a cell phone amplifier. I get great numbers in the field test mode -80 to -65
and it still only works around 5% of the time. I've tried to reset the network, toggle in &out of airplane mode and turning it off and on still no luck. I noticed that the rrc state keeps switching from connect to disconnect. I think when it works the rrc state will read CELL_something. Is there a cure? Thanks for any help.
Bryan

I don't think I can, my Internet is not very fast. I still don't understand why the phone won't connect with the strong signal I'm getting I've heard there is some kind of glitch in the 4s and 5 iphones that it won't switch automatically,
The iphone 4 has a manual switch..I installed the new update last night, SOS it didn't help, if anything it made it worst.

Popup windows work great in IE but not in FireFox

I'm sorry if some of you helpful folks are tired of seeing my questions, but...
I have a page with thumbnails (which float correctly thanks to Altruistic Grandpa) and clicking on each thumbnail opens a new window with a larger version of the photo and some text. It works great in IE - the window opens and closes like it should - but in FireFox it creates a second browser window that has to be manually closed in order to return to the index page.
Any suggestions?
http://acemon.com/features.html
-Ace-

Thank you, Nancy.
Not only did that solve the FireFox problem, it also fixed a minor glitch when previewing in IE.
Every day I learn something new. I just wish I had more days.
-Ace-

Have Imac with boot camp windows 7. Sound works great in mac but no sound in windows?

I have new IMAC 24 with snow leopard os and installed windows 7 ultimate 32 with boot camp. The sound works great when in MAC but there is no sound when boot up in windows.The mixers show a sound level as music is plaing but no sound out of speakers or earphones. I read on forum that many others have had same situation with Mac Book Pros and had success by downloading new realtec audio drivers, but my system has Cirius 2406 ab9 drivers and I can't find any replacements for them. Does anyone have a fix?

Keep on trying, keep searching as there are quite a few work around's for different issues.
One way is to reinstall the Boot Camp drivers and update them again via the Apple Software Updater in Windows. You did update them the first time, right?
Or extract the sound drivers from the Boot Camp package (or the DVD if you have it) and just install those again. You should find a few how-to's in the search results.
Sorry I can't help more...

View containing custom column works in SharePoint 2010 but crashes webpart in SharePoint 2013

First off.. I am using SP FOUNDATION. Secondly, I'm linking a contact library from a parent site to a view on a sub site. This works in SP 2010 but when I tried to duplicate it in our new SP 2013 site, it doesn't.
Reproduce steps to add Parent Contact Picks to Blog Sub-Site in SP 2010 (Foundation)
In parent site, create a contact list (add some people)
In parent site à Site Settings
à Site Columns … create a new Column of type “Lookup”.
Set the Information Source to the Contact List in step 1 with its Column = “Last Name (linked to item)”
Create a BLOG sub site
BlogSite à Site Settings
à Site Libraries and Lists
à Posts
à Add from existing site columns …. Select the Lookup column you created in step 2.
BlogSite à Site Settings
à Site Libraries and Lists
à Posts
à Create View à Standard View….Create a new view and select ONLY the lookup column from step 4.
Add a new Blog post and while in the ‘New-Item’ form, make sure to select a person from the Contact list.
Open up the details page of the new post so that only the single post shows. Edit the Page and Insert a New Web Part
à Lists and Libraries
à Posts.
Edit the newly added web part and change its view to the one created above in step 5.
Drop the down arrow to the right of the newly added web part’s title and select Connections
à Get Filtered values From
à Post [1] (or whatever the default Post Web part is called). Set both the “Provider” and the “Consumer” field names to “ID”.
You will now see that whenever you open the “Details” page of any blog post, you will see the Main post (aka the original form), the normal “Add Comment” entry web part, AND
the new web part that show the Contact selection specific to that single post. Clicking on the Name of the contact will actually pop up the details from the parent site.
SharePoint 2013 (Foundation)
Now perform the exact same steps in SharePoint 2013. However you’ll notice that Step 8 above appears to work but as soon as you try and edit that web part again or move on to step 9, the newly added web part states “Unable to display this Web Part. To troubleshoot
the problem….. Correlation ID: 52d36c9c-e7a2-509e-1d60-3df1ce53ce2d”.
Followup: In doing some testing I determined the following..
1 - If I adjust step #5 as to NOT select the new linked column.. it works. Oddly however, the new view works when are you just using the view by itself (/site/lists/Posts/NewViewname.aspx).
2 - I can fix the crash by enabling the 'Server Render' option on the WebPart. This actually now shows my information however the linked field is no longer a link.
3 - As long as it's not a Lookup type column, I can follow the same process and do not need the Server Render option. Of course these other types are not live links.
Seems like a bug to me.

I set "Breakline" hidden because I don't want to show this in create new item form.
I realized that may be the reason. So changed the column to Optional in CT and created a new calendar using that CT. then at list level CT I changed it to Hidden. That works. The column is available for use when modifying view.
Thanks

My website presents RSS feeds to viewers. This works great with IE but Firefox does not load the RSS data, although it does present the page with blank data regions. Ideas?

Web design tool used is NetObject Fusion 11 which puts a php proxy script on the server to function as a gateway between the RSS feed and the browser.

XmlDocument.create doesn't seem to work in Firefox. You can see an error in the Tools > Error Console
See e.g. http://help.dottoro.com/ljbcjfot.php
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25

CF Component work on local computer but not on actual web.

I'm using CF9 on windows 7 professional. when ever i execute from a form to the action page i get this error:
Could not find the ColdFusion component or interface VAFOINS_NEW.Componet.display. Ensure that the name is correct and that the component or interface exists.
It works fine on my local computer, however the Componet is not invoking properly when on the actual web. Any suggestions?
THE CFC syntax is below:

<cfcomponent displayName="volno" hint="List all FCN, NS, FOID etc. Items By way of volno input">
<cffunction name="volno" returntype="query">
<cfquery name="volno"> select TRIM(CONCAT(name.fname,' ',name.xholy))AS Brother, name.foiid, fcn.*, nspay.*, Foidpay.*, otherpay.*, CONCAT(otherpay.othpayamt,' - ',otherpay.othpaytitle) AS otherpay, fcnsales.salesid,(fcnsales.salesamt) AS FCN_SOLD, salesdate
FROM name, fcn, fcnsales, foidpay, nspay, otherpay
WHERE 0=0
AND Fcn.fcnvolno = '#form.volno#'
AND name.foiid= fcnsales.salesfoiid
AND FCN.fcnid= fcnsales.salesfcnid
AND name.foiid= nspay.NSPAYfoiid
AND nspay.nspaydate= fcnsales.salesdate
AND name.foiid= FOIDPAY.foidpayfoiid
AND FOIDPAY.foidpaydate= fcnsales.salesdate
AND name.foiid= otherpay.othpayfoiid
AND otherpay.othpaydate= fcnsales.salesdate
ORDER BY name.city desc, name.foiid
</cfquery>
<cfreturn "#volno#">
</cffunction>

<cffunction name="total" returntype="query">
<cfquery name="total">
SELECT name.*, fcn.*, sum(fcnsales.salesamt) AS FCN_SOLD_This_Issue, salesdate
FROM name, fcn, fcnsales
WHERE 0=0
AND Fcn.fcnvolno = '#form.volno#'
AND name.foiid= fcnsales.salesfoiid
AND FCN.fcnid= fcnsales.salesfcnid
</cfquery>
<cfreturn "#total#">
</cffunction>

<cffunction name="total_NS" returntype="query">
<cfquery name="total_NS">
SELECT SUM(nspay.nspayamt) AS total_ns
FROM nspay
WHERE 0=0
AND nspay.nspayvolno= '#form.volno#'
</cfquery>
<cfreturn "#total_NS#">
</cffunction>
</cfcomponent>
My action page which invokes the cfc has the code below:
<cfinvoke
component="VAFOINS_NEW.Componet.display"
method="volno"
returnvariable="volno">

</cfinvoke>
<cfinvoke
component="VAFOINS_NEW.Componet.display"
method="total"
returnvariable="total">

</cfinvoke>
<cfinvoke
component="VAFOINS_NEW.Componet.display"
method="total_NS"
returnvariable="total_NS">

</cfinvoke>
<cfquery name="total_FOID" >
SELECT SUM(foidpay.foidpayamt) AS total_foid
FROM foidpay
WHERE 0=0

AND foidpay.foidpayvolno= '#form.volno#'
</cfquery>
<cfquery name="total_other" >
SELECT SUM(otherpay.othpayamt) AS total_other
FROM otherpay
WHERE 0=0

AND otherpay.othpayvolno= '#form.volno#'
</cfquery>
<cfquery name="total_FOIClass_Attendance" >
SELECT COUNT(CLASSFOIID) AS foic_attendance
FROM foiclass
WHERE 0=0

AND foiclass.classvolno= '#form.volno#'
</cfquery>
<cfquery name="List_Class_Attendance" >
select trim(CONCAT(name.type,': ',name.fname,' ',name.xholy,' ',name.slave))AS Brother, name.foiid, foiclass.classfoiid FROM name LEFT JOIN foiclass ON foiclass.classfoiid= name.foiid WHERE foiclass.classvolno='#form.volno#' order by name.type, brother
</cfquery>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>VOL NO Results</title>
</head>
<body>

</body>
</html>

My guess is a problem with the dot path notation. I'm always fighting with this. Most likly your local computer is using a virtual directory named VAFOINS_NEW (http://127.0.0.1/VAFOINS_NEW/) and your production site points directly to the VAFOINS_NEW directory (http://somesite.com/). On your live site the dot path notation you are using is expecting http://somesite.com/VAFOINS_NEW/. Dot paths are a pain and whoever invented them should retire as he or she has done enough damage.
I usually do something like this (I'm typing from memory so there will most likely be syntax error or two but hopefully you'll get the idea):
<cfset variables.dotpath="" />
<cfif listFindNoCase(cgi.script_path,"VAFOINS_NEW","/")>
<cfset variables.dotpath="VAFOINS_NEW." />
</cfif>
<cfinvoke component="#variables.dotpath#Componet.display"... />

Customized selectBooleanCheckbox works fine on Firefox but not IE, Opera?

I'm using a customized selectBooleanCheckbox solution to give me a 'select all' like feature:
<h:form>
<h:dataTable binding="#{DialogManager.bean.nodeTable}" value="#{DialogManager.bean.nodeList}" var="nodeItem" border="1" cellpadding="10" cellspacing="1" >
    <h:column>
        <f:facet name="header">
           <h:selectBooleanCheckbox value="#{DialogManager.bean.selectAll}" valueChangeListener="#{MultipleSelectionDialog.allSelected}" immediate="true" onchange="this.form.submit();" />
        </f:facet>
        <h:selectBooleanCheckbox value="#{nodeItem.selected}" />
    </h:column>
</h:dataTable>
</h:form>When a user clicks on the selectBooleanCheckbox in the header, the other selectBooleanCheckboxs should also be selected. This works on Firefox, but not on IE or Opera. On IE, the checkbox in the header is selected and none of the checkboxs beneath it are selected. On Opera, the checkbox in the header is only selected for a moment before it is deselected.
Why would this happen? How can I fix it for IE and Opera?

tried onclick instead of onchange, no difference.
The IE browser produces browser failure messages:
'elements' is Null or not an object
container.jsp row 325
'elements.dialog:act' is Null or not an object
container.jsp row 381
Code: 0 Character 3I checked in the corresponding files and cannot make sense of the error messages.

Custom Login works in IE Explorer, but not mozilla 1.2. Why?

Portal Rel. 2, all patches applied. Our custom login portlet works just fine when IE Explorer is the browser. When mozilla 1.2 is the browser, everything processes without errors, but the user is never logged in. The portlet is calling the procedure wwptl_login.login_url, and p_requested_url is set to portal.home. Any idea why it would work using one browser and not the other?

Firefox does not use the same version of Flash as Internet Explorer, you need to download and install the version of Flash used by Firefox.
Using Firefox go to http://get.adobe.com/flashplayer/ to download the installer, then run this file to install Flash.
This support article has further details - [[Install the Flash plugin to view videos, animations and games]]

Query works great in 9i, but on 10g massive slow down.

Hi,
I am facing some trouble when running a query in 10g and i don't know why.It is currently working fine in 9i.
The query is like this:
delete from x
where (a,b,c,d,e,f) in (select a,b,c,d,e,f
from y
where site='AMERICA'
and appli='ORACLE')
and site='AMERICA'
and appli='ORACLE'
y table has 117573 entries for the site,appli combination
and x table has 117621 records for the site appli combination
It executes in 28 secs in 9i but on 10g it goes on for hours.
Stats have been calculated on the table and the tables are partitioned on site and appli combination
The explain plan shows an index range scan on the primary key index.
I tried changing the query to use exists instead of in, but it did not help.
Could someone help me with this please?

Hi,
Thanks a lot for the suggestions. Please find some additional information on the query.
DELETE FROM FL_WK_ECART
WHERE
(IDMODELE,IDVECTEUR,IDLIGNE,CDSITEFO,CDSITEBO,CDAPPLIFO,CDAPPLIBO,TPOPEFO,TPOPEBO,IDOPEFO,IDOPEBO,NOFLUXFO,NOFLUXBO,TPFLUXFO,TPFLUXBO )
     IN ( SELECT IDMODELE,IDVECTEUR,IDLIGNE,CDSITEFO,CDSITEBO,CDAPPLIFO,CDAPPLIBO,TPOPEFO,TPOPEBO,IDOPEFO,IDOPEBO,NOFLUXFO,NOFLUXBO,TPFLUXFO,TPFLUXBO
     FROM     FL_ECART
     WHERE     CDSITEFO      = '0769'
     AND     CDSITEBO      = '0769'
     AND     CDAPPLIFO      = 'KONDORFX'
     AND     CDAPPLIBO      = 'OMR'
AND     CDSITEFO      = '0769'
AND     CDSITEBO      = '0769'
AND     CDAPPLIFO      = 'KONDORFX'
AND     CDAPPLIBO      = 'OMR'Version of the database =SQL*Plus: Release 10.2.0.4.0
SQL> show parameter optimizer;
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
SQL>
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 16
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Byte
| 0 | DELETE STATEMENT | | 1 | 15
| 1 | DELETE | FL_WK_ECART | |
|* 2 | TABLE ACCESS BY INDEX ROWID | FL_WK_ECART | 1 | 8
| 3 | NESTED LOOPS | | 1 | 15
| 4 | SORT UNIQUE | | 1 | 7
| 5 | PARTITION RANGE SINGLE | | 1 | 7
| 6 | PARTITION LIST SINGLE | | 1 | 7
| 7 | TABLE ACCESS BY LOCAL INDEX ROWID| FL_ECART | 1 | 7
|* 8 | INDEX RANGE SCAN | FL_ECART_PK2 | 1 |
|* 9 | INDEX RANGE SCAN | FL_WK_ECART_PK2 | 1 |
Predicate Information (identified by operation id):
2 - filter("TPOPEFO"="TPOPEFO" AND "TPOPEBO"="TPOPEBO" AND "IDOPEFO"="IDOPEFO
PLAN_TABLE_OUTPUT
"IDOPEBO"="IDOPEBO" AND "NOFLUXFO"="NOFLUXFO" AND "NOFLUXBO"="NOFL
"TPFLUXBO"="TPFLUXBO")
8 - access("CDSITEFO"='0769' AND "CDAPPLIFO"='KONDORFX' AND "CDSITEBO"='0769'
9 - access("CDSITEFO"="CDSITEFO" AND "CDAPPLIFO"="CDAPPLIFO" AND "CDSITEBO"="
"CDAPPLIBO"="CDAPPLIBO" AND "IDMODELE"="IDMODELE" AND "IDLIGNE"="I
filter("CDSITEFO"='0769' AND "CDSITEBO"='0769' AND "CDAPPLIFO"='KONDORFX'
AND "IDVECTEUR"="IDVECTEUR" AND "IDLIGNE"="IDLIGNE")
Note
- 'PLAN_TABLE' is old version
31 rows selected

Bought New Extreme, works great with Macs but can't get PC to connect

I just bought a new Airport Extreme this weekend. As promised it was a breeze to set up and things were working well until I tried to connect my TIVO and my work laptop (Windows) to the network I set up. I can't get either to connect to either the base network or the guest network with any level of security set on it. My only success has been to configure the Guest Network without security on it (but I don't like that idea).
Please help.

I don't see "Equivalent Network Password" as a selection on the Base Network screen (or any of them for that matter).
Isn't this the password for my base station and not the wireless network? Maybe that is my problem. I am trying to connect to the network and not the Base Station? I am getting confused. What I really need to do is connect my work laptop (Windows based machine) and my TIVO to the wireless network I've created (Radio Mode selected to Automatic, Channel Selection to Automatic, Security set to WPA/WPA2 Personal).

HT4534 I installed facetime on my computer in May 2011. It worked great at first,but now the volume goes out when I am on calls.What can I do to stop this from happening? Its not my speakers,I have used Skype and Google+ and the volume never goes out.

The volume on my facetime goes out very frequently. I can hear the person just fine, but they can not hear me. I have checked my app store to see if there have been any updates to the version of facetime that I bought in May 2011 and it's not. Is there anything that I can do to fix this problem?
By the way it is not my speakers. I have used Google+ and Skype, and they both work just fine and the volume does not go out.

Thanks, it seems that it doesn't like to play games, which is a bit of a bummer as i bought this specifically because it was capable of doing that. To be fair, it is capable... I just need to get used to a sound like sitting by a washing machine on spin cycle... Wish they would make people aware of this in the Apple Store, its very misleading and not at all desireable.

TS2972 Apple TV (2) works great with everything BUT iTunes on my computer, AND I can turn Home Sharing Off and On multiple times and NOTHING show up under "shared" and NOTHING shows up under Computers on Apple TV???

My Apple TV (2) works fine with my iPad and iPhone.
My iTunes syncs with my iPad and iPhone.
I have turned "Home Sharing" off and on multiple times - of course using the same AppleID - and NOTHING shows up under Shared (and then Shared goes away) and NOTHING shows up under "Computers" on Apple TV?
Why aren't Apple TV and iTunes smart enought to work with each other on the same network? This should not be this difficult...

I think I am having the same problem.
My issue: since updating the software on ATV, I get an issue where shortly after starting a movie or video of some sort streaming from iTunes on my iMac the vid stops and Apple TV tells me that I need to connect to my Home Sharing account. Sometimes I can fix it by turning Home Sharing off and back on in my settings. Sometimes I need to completely reboot the AppleTV!
Any suggestions???

HT201177 switching to multiple displays via i-mac and apple tv works great in video but the audio doesn't switch over.

When I switch to multiple displays the video transfers perfectly through my Apple TV but the audio doesn't come through unless I turn the volume all the way up to it's maximum level, and at that, it's hardly discernible.

Hi Pommedaddy!
Try using the following article to help you troubleshoot this Apple TV audio issue:
Apple TV (2nd and 3rd generation): Troubleshooting audio issues
http://support.apple.com/kb/TS5150
Thanks for using the Apple Support Communities. Have a good one!
-Braden

My custom component works great in cs5 but cast a #1009 error in cs5.5!

Similar Messages

Maybe you are looking for