My DAQ program uses Traditional NI-DAQ in Visual C++ 6.0. I get error-10609 at SCAN_Start when run

My data acquisition program uses Traditional NI-DAQ in Visual C++ 6.0. When I run the program, I get error -10609 at the SCAN_Start that states
A transfer is already in progress for the specified resource, or the operation is not allowed because the device is in the process of performing transfers, possibly with different resources.
Why do I receive this error?

Hi,
TThe error -10609 can result from several situations in which the device's resources are already in use.
A Measurement & Automation (MAX) test panel is already open.
If you open a test panel window for your device and attempt to run your application, you can get this error. If this is the case, close the MAX test panel.
An AI Clear function was not used at the end of the previous acquisition.
If you do not call the AI Clear function after performing your acquisition, the resources remain open. Be sure to call this function, inputting your taskID, at the end of the acquisition.
Multiple programs are accessing the device.
If you have multiple VIs accessing the device, or perhaps a LabVIEW VI and another application, the resource will be taken and you will receive the error. You can only run one application accessing the specific resource (for example, analog input on channel 0) at a time
I hope this helps...and have a Great Day!
George

Similar Messages

I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?

I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?

I also have downloaded netflix "Silverlight" I believe successfully...at least acoording to the popup at the end of the Silverlight download "You have successfully downloaded Silverlight"

How do I use traditional NI-DAQ to find a temperature using a thermocouple?

I have seen examples using scxi modules and NI-DAQmx programming to find temperature using a thermocouple. For my application, I do not have a scxi module and my programming is in traditional NI-DAQ. I tried copy and pasting a NI-DAQmx application into my program and it did not work due to the traditional and mx conflict. My question now is how can I measure temperature using a thermocouple with Traditional NI-DAQ programming on a PCI6025E? Thank you.

I believe I posted a response for the same question here:
http://forums.ni.com/ni/board/message?board.id=250&message.id=8836
Thanks,
LA

How can I open a cfm file in Dreamweaver CC using a Mac? Added to the Extensions.txt. Getting error adding to preferences-- file types.

I am trying to open Cold Fusion files using Dreamweaver CC. We've never had a problem with the versions before the Cloud. My co-worker can open using a PC, but I'm using a Mac. I can connect to the server and see the files, but when I open, it opens the file in text editor. I have tried adding the extensions to the Extensions.txt file (they weren't there previously), editing the MMDocumentTypes.xml file (the file type WAS in that file), adding to the Preferences-->File Types/Editors (I can add the extension, but when I try to choose Dreamweaver CC as the editor, I get an error "You cannot use Adobe Dreamweaver CC as an external editor. Please choose a different application."). When I right-click the file, I do not see an "Open With" option, only "Open". Does anyone know of another trick that could make Dreamweaver CC more than an HTML editor for Mac? I cannot us CF Builder - no approval for loading the extra files server-side to use that IDE.

Have you tried these suggestions...
Open ColdFusion documents in Dreamweaver CC

How to use : bind character in DB adapter Select Query SOA11g. Getting Error code :17003 .java.sql.SQLException: Invalid column index error

Hi All,
The Actual query to perform is below.
SELECT name,number from emp WHERE CASE WHEN :1='T' AND term_date IS Not NULL THEN 1 WHEN :1='A' AND term_date IS NULL THEN 1 WHEN :1='ALL' THEN 1 ELSE 1 END = 1;
I have tried in DB adapter like below as a parameter for :1 as #vInputParam
SELECT name,number from emp WHERE CASE WHEN #vInputParam='T' AND term_date IS Not NULL THEN 1 WHEN #vInputParam='A' AND term_date IS NULL THEN 1 WHEN #vInputParam='ALL' THEN 1 ELSE 1 END = 1;
Getting Error code :17003 .java.sql.SQLException: Invalid column index error.
Please suggest me on using ':' bind character in DB adapter Select Query SOA11g.
Can someone help me on this please?
Thanks,
Hari

Hi,
Could you please make sure your binding style(Oracle Positional,Oracle named..etc) of the Seeded VO and Custom Vo are same.
This is the option you will get when you are extending your vo. So make sure that both are same.
You can refer the below link too
VO extension leads to "Invalid column index" exception
Thanks
Bharat

Use loadSWF load my stage3D game swf and show In AIR , This swf may crash when running

Problem Description:
use loadSWF load my stage3D game swf and show , This swf may crash when running
Steps to Reproduce:
run my Upload Project . Fill in the login box, any account and password . Because of network problems, you may need to wait a long time to show up login box
Actual Result:
this swf crash when running
Expected Result:
this swf do not crash when running
Any Workarounds:
Test Configuration
My Hardware and Environment details:
1.this url's swf load files in worker
2.this url's swf use SDK is Flex 4.6.0(bulid23201)
3.this url's swf is Flex Project
Upload Project Url:
http://fight.fuhuodao.com/fight/testUrl/!FightAirShell.zip

The loading of SWFs from AIR has a different Security model than that of the WebPlayer. There is a workaround to loading plugins in AIR: If you use a static plugin this should work for you. To do this: Link in the plugin at compile time, and pass the PluginInfoResource to the loadPlugin() method.

I NEED HELP using Site Builder for adding sound to my personal webspace ~~ getting error!!

I am trying to add a sound .wav file to my personal webspace and keep getting this error.
Even tried converting it to a .mp3 file and still got this error. Anyone know a solution?

If it did work then we know that there's nothing wrong with the site support for mp3 files. The problem is with how Itunes ripped the CD then if the website wasn't even accepting the .wav file it created. Try using another program to rip the CD. If you have a windows computer, you can use Windows Media Player to do the ripping. See if that works for you.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

When using Firefox -loging to Yahoo mail - see account but then get error page says i have lower resolution than 1024xx600- have new computer and set at 1600x900, cleared out past history etc but does the same - can log in w/chrome but not firefox

I don't know what else to say

That can happen if you zoom Yahoo mail websites.<br />
Yahoo uses a script to check the screen dimensions and zooming a page affects the window and screen width and height settings.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Getting error -10011 in filemaker when using AS in script step

Hi,
I hope someone can help. I have had this script working before but am just making the transition from FM 6 to 7 and have to update the scripts.
I am gathering info using FM script steps and AS scripts from the backdoor of iTunes. When I create a new record i am getting "Data being accessed by another user,script or transaction". (-10011) several times when i attempt to pass the info back into the record in the FM database. I get the error as i attempt to write the data i want back into the current FM db record. Here below is one field being written back and it generates this error once. Other subsequent scripts for other fields generate the same error. I am using this AS at that point:
tell application "FileMaker Pro"
set the_source to item 1 of (field "Source_number" of database "CD database" as list)
end tell
if the_source ≠ 0 then
tell application "iTunes"
set return_value to 1
set disk_name to name of audio CD playlist 1 of source (the_source as number) -- assumes is the first CD
set disk_name to my ConvertOwnerToString(disk_name)
set junk to class of disk_name
if (disk_name is "") or (disk_name is "Untitled Audio Disc") then
-- connect
set disk_name to get title
end if
end tell
tell application "FileMaker Pro"
set cell "Title" of current record of window 1 of database "CD database" to (disk_name) as text
end tell
end if
The error happens at the "set cell" line 3 up from the bottom.
When i invoke this routine separately i do not get any errors and it works fine !!
Any ideas ? No other users logged on, no other apps use this file.
Thanks
2.5 G5, 400 G4, 1.2 iBookG4, iMac, Airport, MP2k Mac OS X (10.4.6)
2.5 G5, 400 G4, 1.2 iBookG4, iMac, Airport, MP2k Mac OS X (10.4.6)

Try temporarily turning off all your firewall and antivirus software until the download has completed.

Need To use SQL Code to Appt Dates 2 Days from current Getting Error

I am trying to pull data that shows appt information on a patient:
FName,LName, PhoneNumber, ApptDate, ApptTime, and Status that equals Active. I need to pull this info everyday. How can I set this up in a stored procedure to pull all this information automatically on a daily basis where it pulls by Appt Date that is 2 days greater than the current date?
SELECT
     Patient.First,
     Patient.Last,
     Patient.HomeArea,
     Patient.HomePhone,
     Patient.Status,
     ApptHis.Date,
     ApptHis.Time
From
     Patient, ApptHis
Where
     Status= 'Active' and
     ApptHis.ApptHisDate >= dateadd(day,datediff(day,0,getDate())+2,0)     and
     ApptHis.ApptHisDate < dateadd(day,datediff(day,0,getDate())+3,0)
Please Help I am getting an ORA-00900 Error.
Thanks!

In your select statement you specify the column ApptHis.Time but it looks like in the database the actual column name is Time1.
Also, Date is a reserve word in Oracle. It's a really bad idea to create columns using reserve words. You may have to use double quotes (i.e. "Date") to specify the column name Date in your selects.
Try this:
SELECT
Patient.First,
Patient.Last,
Patient.HomeArea,
Patient.HomePhone,
Patient.Status,
ApptHis.Date,
ApptHis.Time1
From
Patient, ApptHis
Where
Status= 'Active' and
ApptHis.ApptHisDate between trunc(sysdate+2) and trunc(sysdate+3)-1/1440;
NumbNutz

Using Mozilla FireFox 2.0 to show/hide themes,I get errors

I use IE6.0 to show/hide themes,there are no errors.
When I use Mozilla FireFox 2.0,I got the following errors.
does anybody can help me?
Thank you in advance.
07/03/20 12:55:06 INFO [oracle.sdovis.CacheMgr2] Creating/replacing a geometry c
ache group: sdovis_subreg_mvdemo_jdbc:oracle:thin:@delcantsy:1521:csu2 : KINGS_H
WY_GEOMETRY_PDT_GEOM.
07/03/20 12:55:07 ERROR [oracle.lbs.foi.FOIServlet] java.lang.NegativeArraySizeE
xception
at oracle.lbs.foi.foiUtil.calculateHtmlLineArea(foiUtil.java:306)
at oracle.lbs.foi.foiUtil.getLineStringAreaStr(foiUtil.java:1096)
at oracle.lbs.foi.FOIServer.getHTMLMapString(FOIServer.java:855)
at oracle.lbs.foi.FOIServer.renderFOILayer(FOIServer.java:555)
at oracle.lbs.foi.FOIServlet.doPost(FOIServlet.java:178)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletReque
stDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(Ser
vletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequ
estHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpReques
tHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpReque
stHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.ja
va:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSo
cketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(Server
SocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocket
AcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(
ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
07/03/20 12:55:07 ERROR [oracle.lbs.foi.FOIServlet] [Foi Server] foi process err
or.

yes linestring themes will have the same restriction as polygon themes: you can add multiple of them, but you may experience strange behaviors when you attempt to turn one of them on or off. So the best practice is to ensure there is only one linestring/polygon type theme-based FOI added to the MVMapView object at any time.
This restriction is there mainly because of IE6's inability to support PNGs with alpha transparency natively.
And yes you may notice some difference in performance between IE and FF, mainly because for IE we have to apply additional processing so that it can handle PNGs with alpha transparency which introduces a lot of overhead.
hope this helps,
LJ

I am getting error code 130:11 when I try to use Adobe Acrobat Pro X

I get an error message when I try to start Accrobat Pro X. I am using the cxloud subscription and am getting the error 130.11

Hi Thomas,
Please try the solution described here:
http://helpx.adobe.com/acrobat/kb/acrobat-x-closes-launch-creative.html
-Dave

Recently had my cd drive jam while using itunes, fixed that, but now itunes wont load, I get a message that: itunes cannot run because some of its required files are missing, please reinstall itunes. I have an HP notebook that came with itunes installed,

Ok, have itunes on my HP notebook, cant reinstall itunes unless I have a mac serial number, and don't know how I get that?

Borbathegeek wrote:
... cant reinstall itunes unless I have a mac serial number, and don't know how I get that?
That's crazy. A serial number is not required.
Are you certain you chose the correct version to download?
http://www.apple.com/itunes/download/
If you are still having problems, remove and reinstall iTunes and all its components:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I frequently find that when closing Firefox, and try to reopen again, get error message "Firefox is already running, but not responding. Recommend to close it, or restart system". Using Windows Task Manager, no application is found. After restart, OK.

At the update to Firefox 3.6.8, I also updated to Flash 10.

I get this problem often, on my computer which runs XP, I find simply waiting a few moments (up to a minute) is enough to end the process.
On my Vista machine, it sometimes works that way, but if FF locked up (stopped) and is ended through the task manager, it often requires a reboot or a much longer wait (up to 10 minutes or more).

I paid for adobe reader to convert pfs to excel. It used to work but now it does not. I get "error while siging in message" but I am signed in. Please fix this or advise.

Adobe no longer converts pdfs to Excel or Word. I continually get error while signing in message. But I am signed in. I paid for service and expect it to work. I can get no help form adobe. Please help now.

Hi adoberror,
I'm sorry that you're having trouble with ExportPDF. Can you please try the following to resolve this sign-in issue:
Choose Edit > Preferences (Windows) or Adobe Reader > Preferences (Mac)
Click 'Adobe Online Services' on the left-hand side
Sign out of our Adobe ID and sign back in.
Try to convert your document again.
If you continue to have trouble, please verify that you can access the service via the web interface. To do this:
Open a browser and navigate to http://exportpdf.acrobat.com/signin.html
Try to log in with your Adobe ID (email address) and password
Once logged in, follow the on-screen prompts to convert a file
Please let me know how it goes.
Best,
Sara

My DAQ program uses Traditional NI-DAQ in Visual C++ 6.0. I get error-10609 at SCAN_Start when run

Similar Messages

Maybe you are looking for