My display keeps changing to 800x600 after upgrade to 10.8.3

After upgrading to 10.8.3 my display keeps changing to 800x600 after it wakes up from sleep. I have to go to preferences and set again, and it works. It is quite annoying. Any clue.

Not much to go on.
What monitor and connection method are you using with the mac Mini..?
Have you tried resetting the > NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

Similar Messages

  • Has anyone seen a DRASTIC change in speed after upgrading to 5.7?

    Has anyone seen a DRASTIC change in speed after upgrading to 5.7? Just the simple task of copying photos now takes FOREVER. Importing iphoto for just two years of photos (my smallest iphoto library by far) took A WEEK. I did not have access to Lightroom for a week. I thought it was just going to be the iphoto import, but now my regular import is taking almost 1/2 an hour and only 22 photos into the import.

    Oh no! I think I might be experiencing the same problem, oddly with almost exactly the same time to import from iPhoto, just shy of 7 days...
    I also posted this problem to the form and am actually on the phone with Adobe support right now. I have an iPhoto library of ~15,000 photos and I didn't expect it to be very fast, but it's taking an average of at least 40 seconds per photo to import, and it has kept complete focus of LR so I can't even confirm that it isn't importing duplicates. By my calculations it should take over 166 hours to complete the import! Something has to be wrong here. I've been going for over 48 hours and am scared to stop the import if this really is normal performance.
    Are normal import tasks also slow for you now? Can you share any more details? I can't test myself yet since the iPhoto import is still churning, but it could help troubleshooting with support. I'll let you know if they come back with anything, I'm on hold now.

  • I am not able to change the object after upgrade(SPAU Activity).

    HI All,
    I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
    You are not authorized to make changes
    Message no. 37202
    Diagnosis
    You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
    There is also a second possibility:
    You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
    System Response
    Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
    Procedure
    Comsult your system administrator.
    Thanks in Advance,
    Mahesh Devershetty

    Hi,
    Does the user who would like to change the screen have the authorisation
    for S_DEVELOP in his profile? Please run transaction /NSU53 after the
    failed authorisation. You will get an information which authorisation
    is missing.
    Additional please check if you have open entries in transaction SPAU for
    that object.
    If you couldn´t solve the issue I need an user to analyse it in your
    development system.
    That user needs all authorisation for development and has to be
    registrated as developer.
    The system uses the authorization object S_DEVELOP for Workbench objects
    can you please check your user master record whether it contains the
    required autorization or not.
    Please also ensure that modification adjustment is turned on as per note:
    197600  Switching the Modification Assistant off and on
    Aidan

  • Cannot change account picture after upgrading to Mountain Lion.

    After upgrading to Mountain Lion from Snow Leopard I cannot change account picture anymore.
    The box which is supposed to contain picture previews just says "No items".
    Screenshot attached:
    This is not limited to a particular account, trying to change the picture within any account leads to this problem.
    Is there any solution for the issue?
    Thank you in advance.

    Thank you for the answer.
    Sure I can drag a photo to the users profile and it works but those Default ones were quite useful for having no mess with setting custom picture.
    MacBook Pro with same Snow Leopard -> Mountain Lion upgrade did not have such issue.

  • Display keeps changing on it's own

    For a couple of weeks now my Mac Mini keeps changing the display at random.  I have changed the settings on the monitor itself and thru system pref.  Nothing fixes it permanently.  It looks as though it's going into some sort of zoom effect and the fonts look weird (almost like what windows looks like if you start in "safe mode").  I can do absolutely nothing, just walk away from the computer, and a few hours later go back and it will have fixed itself. Or vice versa.  For example, this morning I'm on the computer, everything is fine.  I walked away, it went into sleep, I come back hit the space bar on the keyboard to wake it up and I'm in zoom.    ?????       what is going on?  Do I have some sort of virus?                                  

    Mine appears to be doing the same thing.  I use reset to bring it back to normal.  It does not matter if all programs are closed or not.  It still does it. When I say reset I mean clicking on the Apple icon and going to reset not the command option r, p.  Of course they may be the same thing for all I know as I do not know the short cuts very well.
    I also have a RAM problem - the amount of RAM available keeps disappearing.  I do not know if this is related or not - but plan to post this question in another community.  I only mention it in case it might be relevant.

  • TS3899 I have trouble keeping emails on inbox after upgraded to ios 7.

    I have trouble keeping emails on my iphone 4 inbox after upgraded to ios 7.
    It kept disappearing every week. Even though "Flagged" shows 7 mails, I can only view 2 of them, and cannot view rest of the 5 emails.
    It had never happened on ios 6.
    My setting is the POP for incoming/SMTP for outgoing.
    Tried to fix the problem, I deleted my e-mail account(Shaw), and recreated with Exchange server, but it didn't work.
    So I recreated my e-mail account with POP/SMTP again.
    And set on"Never" delete from server.
    It's very frustrating and please give me some solutions!

    Read https://discussions.apple.com/thread/5327557?tstart=0

  • How to change table defnition after upgrade from 9 to 10 ?

    after upgrade from 9 to 10, tables ddl still like 9i:
    .................PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255..........
    ................ inndex PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS..........
    Is there a method to convert it all tables to new 10g style without re-create thousands tables then emp/imp one by one?
    Thanks

    What do you mean by "10g style"? Do you want tables to be using ASSM? If that's the case, that's a feature of tablespace itself. So it means that your tables need to be in those tablespace which are having Segment Space management auto set in them.I don't think that there is any automatic package which can do the same on the fly.
    One way ,which may not be very less time consuming but still can help is to convert the segment space management using EM.But again,this does recreate teh tablespace so I don't think that this is any different from exp/imp.
    HTH
    Aman....

  • Keeping access to Ubuntu after upgrading to Windows 8.1

    Using Windows 7 Pro. I got a Windows 8.1 License with a setup .iso file. I want to setup (upgrade) Win 8.1, but before, I need to verify something. I have Ubuntu installed side by side with Win 7 (Win 7 installed first). The current boot (grub) is of Ubuntu
    because it's the last one installed. My question is : "Will installing Win 8.1 overwrite the boot (grub) of Ubuntu? if it's the case, Will Windows give me (as an alternative) the choice of starting Win 8.1 or Ubuntu?"
    Because in fact, my current PC came with SLED installed, and I need Windows of course, so when I installed Win 7, I lost access to SLED (grub has been wiped) and Windows started directly. That's why I installed Ubuntu after Windows 7 because I need at least
    one Unix OS installed side by side with Windows.
    Looking on the web is saying yes, the grub will be lost. I need to confirm from you here, because, any error will cost me a very big pain (reinstalling the tens of apps that I have after installing Win 8.1 is enough), and Thanks in advance.

    Hi,
    Based on my test,if you upgrade from Windows 7 to 8.1 , this update will overwrite the MBR. 
    And you will lost my grub.I think you can repair the windows boot first then deal with Ubuntu using the live CD and boot-repair application.
    But I cannot confirm if this is a right method to resolve the issue.
    So,I suggest you post this question to ubuntu forum for further help.
    http://ubuntuforums.org/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Regards
    Kelvin hsu
    TechNet Community Support

  • I am not able to display or change the file after deleting the file

    Hi All,
    I am checking in the document to content category while creating the DIR.
    I tried to delete the file on my desktop and after i am unable to open the file in CV02N,It gives the below error:
    Error while executing "C:\
    Firdosi\Desktop\gg.txt"
    I changed the settings in define workstation applications also and i ticked on Data check of.
    Please advice.
    Muzamil

    Hi Muzamil,
    The error is occuring because you have not checked-in the document before deleting. First you need to save the DIR and then you can delete the file from your desktop. Then only SAP DMS can retrieve the file from content server and display on screen.
    If you have only selected the file which is not checked-in means DIR not saved. And suddenly you tried to delete the original file from desktop. It means the recod is not saved in SAP DMS and before that you have tried to delete it.
    This is standard behaviour and such type of files can't be retrieved from content serever as it's original is not saved properly i.e. checked-in.
    Hope this will resolve the query.
    Regards,
    Ravindra

  • German language changed into english after upgrade but wont re-change

    the option in settings is still on german but the whole iTunes is english after i upgraded to the 7.4.3.1 version.
    whats that?

    I need to be sure I haveunderstood correctly.
    You know that if you go to Edit>>Preferences>General you can set your language, then you have to restart iTunes for the change to take effect.
    So you have set you language to Genrman and it stays in English?
    Something that has worked for someone esle is to do a repair install of iTunes.
    Go to Control Panel>>Add remove programs.
    Select iTunes and press Change. Then Choose repair.

  • Unable to change window properties after upgrading project from X5 to RH8

    Hi,
    I just upgraded an existing project from X5 to RH8.  In Windows Properties (HTML Help), if I make any changes and click OK, I receive the following message:
    "For Width field please enter a value between 65 and 24."
    If I do enter a value within those parameters in any of the "Width" options on the Properties page, I'm still presented with the same error message. 
    How can this be corrected?
    Thanks!

    Hi there
    Perhaps try creating a totally new window definition and configuring the parameters as desired.
    Once in a blue moon we see that the window definition somehow becomes corrupt.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Primary display keeps changing

    I have a Mac Pro running 10.6.8 with 2 identical monitors.  Each time I reboot the primary display changes.  Tried resetting the primary display in screen prefs but each time I reboot the primary display shifts to the other monitor. 
    Any suggestions how to fix?

    One of my questions was what happeens if you physically switch the monitor connections to the vido card?
    Click Detect Displays too in the Displays system preferences.
    Try an smc and pram reset just for the heck ot it too.
    Another thing to try is to boot in safe mode and then reboot normally.

  • Disks Not Displayed in Server Manager 2012 After Upgrade

    I have two identical IBM x3650 M3 servers with the M5014 RAID controller installed. The internal SAS drives are configured with three RAID 5 logical drives, basically a C:, D:, and E:. They also have an external eSATA drive with a Silicon Image eSATA
    card installed that is used for backup. Both servers were upgraded from Server 2008R2 to 2012R2. Both of the server's firmware was updated prior to the upgrade and are using the same versions.
    On the first server, all of the RAID controller's logical drives are displayed under Server Manger > File and Storage Services > Volumes > Disks. All of the volumes on these drives and the eSATA drive are displayed correctly under Server
    Manger > File and Storage Services > Volumes.
    On the second server, all of the volumes correctly displayed under Server Manger > File and Storage Services > Volumes. However, only the first logical drive is displayed under Server Manger > File and Storage Services > Volumes
    > Disks. The other two logical drives are not displayed. The drives show up correctly under Disk Management and Device Manager. All of the data and shares are accessable and the server functions like it did before the upgrade. While it doesn't seem
    critical at the moment, I would like to find out why the logical drives are not being displayed.

    Hi,
    Did you have a failover cluster with a highly available storage solution that uses LSI MegaRAID controllers and use Server Manager to manage the storage using the LSI SMI-S storage provider? If so, the associated physical disks may not appear correctly in Server
    Manager when you create storage pools or virtual disks from the storage pools. 
    To work around this issue, run the following Windows PowerShell cmdlet on all nodes, and then refresh the Server Manager UI: 
    Update-StorageProviderCache –DiscoveryLevel Full
    For more detailed information, please refer to the article below:
    Known Issues: File and Storage Services in Windows Server 2012
    http://social.technet.microsoft.com/wiki/contents/articles/13392.known-issues-file-and-storage-services-in-windows-server-2012.aspx
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Changing HFM adapter after upgrading FDM 11.1.1.3 to 11.1.2.1

    Hi,
    I have upgraded FDM from version 11.1.1.3 to 11.1.2.1. The last step I guess is to re-register the adapters to 11.1.2.1 version - FM11x-G5-E
    Does any know how to achieve that with out re-building the mappings?
    Or any pointers is appreciated!
    Thanks,
    PM

    The adapter is not tied to the mapping table. You just need to import the adapter XML and then register and configure the adapter on each FDM application server in the environment:
    a) Login to the FDM application via the workbench client
    b) Choose File > Import and choose the FM11x-G5-E.XML file and choose "open"
    c) Click "Select All" and click "import" to import the adapter into the application
    d) Copy the "AdapterComponents" folder that was contained in the adapter .zip file to the Oraclle\Middleware\EPMSystem11R1\Products\FinancialDataQuality\SharedComponents directory
    e) Choose File > Register Adapter and choose the AdapterComponents\fdmFm11xG5E\fdmFM11xG5E.dll file and choose "open"
    f) Right-Click on the FM11x-G5-E adapter and choose"configure" and enter the FDM Service account username/password/confirm password/domain and click OK. **NOTE: this is the account that was used for the FDM configs (App Server, Load Balance Server, Task Manager, Web Config)
    g) Choose Tools > Application Settings and change the System Code to the FM11x-G5-E adapter
    You can then syncronzie the settings from the old adapter to the new adapter by right-clicking on the Fm11x-G5-E adapter and choose "Syncronize" and choose the FM11x-G5-C adapter as the source and click OK to copy the settings to the new adapter.
    You may have to update the target periods and categories in the Control Tables on the web.
    That should be everything.

  • Macbook keeps shutting itself off after upgrading to snow leopard

    Hi everyone, I hope you can help me out as I am out of ideas! After be assured that I could upgrade my late 2006 intel based macbook (10.5.8) to snow leopard, I bought the disc and tried to install. Everytime I tried, it shut itself down. I wiped the hard drive clean and tried again. Still happened. Finally after 14 hours of attempts, something finally stuck and I had snow leopard. I then tried to get all the updates and it kept shutting down. I tried to migrate my files from time machine and it shut itself down. Fed up, I tried to go back to leopard, but the computer won't stay on long enough to complete this. I wiped the hard drive clean again and now it won't stay on long enough to get to the start up page! HELP! I tried starting up in safe mode and it won't work. I've run disc utility several times and it says everything is OK. Now I have a blank hard drive on a computer that won't stay on for more than 5 minutes. Any insight would be greatly appreciated, otherwise I got to take it in to an apple specialist as the apple store has already told me the refuse to work on it because it is older than 5 years!!!!

    Try a PRAM reset
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound two more times.
    Release the keys.

Maybe you are looking for