Disks Not Displayed in Server Manager 2012 After Upgrade

I have two identical IBM x3650 M3 servers with the M5014 RAID controller installed. The internal SAS drives are configured with three RAID 5 logical drives, basically a C:, D:, and E:. They also have an external eSATA drive with a Silicon Image eSATA
card installed that is used for backup. Both servers were upgraded from Server 2008R2 to 2012R2. Both of the server's firmware was updated prior to the upgrade and are using the same versions.
On the first server, all of the RAID controller's logical drives are displayed under Server Manger > File and Storage Services > Volumes > Disks. All of the volumes on these drives and the eSATA drive are displayed correctly under Server
Manger > File and Storage Services > Volumes.
On the second server, all of the volumes correctly displayed under Server Manger > File and Storage Services > Volumes. However, only the first logical drive is displayed under Server Manger > File and Storage Services > Volumes
> Disks. The other two logical drives are not displayed. The drives show up correctly under Disk Management and Device Manager. All of the data and shares are accessable and the server functions like it did before the upgrade. While it doesn't seem
critical at the moment, I would like to find out why the logical drives are not being displayed.

Hi,
Did you have a failover cluster with a highly available storage solution that uses LSI MegaRAID controllers and use Server Manager to manage the storage using the LSI SMI-S storage provider? If so, the associated physical disks may not appear correctly in Server
Manager when you create storage pools or virtual disks from the storage pools.
To work around this issue, run the following Windows PowerShell cmdlet on all nodes, and then refresh the Server Manager UI:
Update-StorageProviderCache –DiscoveryLevel Full
For more detailed information, please refer to the article below:
Known Issues: File and Storage Services in Windows Server 2012
http://social.technet.microsoft.com/wiki/contents/articles/13392.known-issues-file-and-storage-services-in-windows-server-2012.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Remote desktop connections not showing in server manager 2012 for one of the session hosts

This is a three server deployment with one server being the connection broker, gateway, licensing, etc with two session host only servers.
rdmgr
rd1
rd2
Using the server manager on the rdmgr connection broker (or any other server for that matter) yields only connections from rd2 with nothing from rd1 displaying.
Users can connect to rd1 without issue.
At one point rd1 had the connection broker role installed also but high availability was not setup. I removed the role hoping it would correct the problem but no luck.
Any help would be appreciated. Thanks.

Hi,
1. Is rd1 part of a collection?
2. On rd1, in Computer Management, is the broker's computer account a member of the local RDS Management Servers group?
3. If you run the below command do you get a list of sessions:
query user /server:rd1
4. Any errors/warnings in either the broker's or rd1's event log?
Broker: Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-SessionBroker
rd1: Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-SessionBroker-Client
Both: System and other logs
-TP

Itunes will not display , although task manager says it is on

itunes will not display , although task manager says it is on, by double clicking icon, it will ask , do you want itunes to make changes, I say yes and nothing appears afterward as if it is already on but no display of itunes, so i cannot use iphone or ipad to pc

Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles.<br /><br />
NOTE: Establish a habit of exiting/closing Firefox with Firefox button > Exit or File > Exit to allow an orderly shutdown of Firefox and closing of all of the files that Firefox has open.
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
#Why Firefox may hang:
#*[http://support.mozilla.org/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.org/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably an Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Entity Framework doesn't create the database in SQL Server Management 2012, instead it just creates in (localdb)\v11.0 How to fix it?

Hi, I'm Begginer in Entity Framework. Then I'm having some problems.
I created my entities and I give Save Changes. (Ok)
Then, I Tried to Connect with the database through Server Explorer, if I use the instance of the SQL Server Management Studio 2012(PC-PAULO\INSTANCIAPJ) as Server Name, the database doesn't appears but, if I use the the instance (localdb)\v11.0 the dabase
appears.
How to change the save to the SQL Server Management Studio 2012, I don't know where this (localDB)\v11.0 saves.
Help-me Thank you :D

Hello PauloJos,
The code should be ok and it is really strange that the database is only created into the local database in your machine. I am wondering if it is related with the machine environment, could you please have a try with below demo on your machine which works
on my side and if it is possible, please have a try to run your application on other machines to see if it works:
class Program
static void Main(string[] args)
#region https://social.msdn.microsoft.com/Forums/en-US/00eff3c4-2336-4807-9212-e6f2a6c8812e/entity-framework-doesnt-create-the-database-in-sql-server-management-2012-instead-it-just-creates?forum=adodotnetentityframework
using (CFDbContext db = new CFDbContext())
db.Database.CreateIfNotExists();
#endregion
public class CFDbContext : DbContext
public CFDbContext() : base("UltraFoda3") { }
public DbSet<TestOne> TestOnes { get; set; }
public class TestOne
public int ID { get; set; }
public string Name { get; set; }
Config file is similar:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>

<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.LocalDbConnectionFactory, EntityFramework">
<parameters>
<parameter value="v11.0" />
</parameters>
</defaultConnectionFactory>
<providers>
<provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
</providers>
</entityFramework>
<connectionStrings>
<add name="UltraFoda3" connectionString="Data Source=YourServer;Initial Catalog=UltraFoda3;Integrated Security=True;MultipleActiveResultSets=True" providerName="System.Data.SqlClient" />
</connectionStrings>
</configuration>
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

Greetings;
This seems to an ongoing issue (see related discussion link). We've been experiencing the same update lag since last Friday. The new additions to the Collection appear and are accessible in both the iPad and iPhone applications, but even though they additions appear in "Quick View", the material doesn't appear in the Collection itself. Apple is aware of the issue and is investigating. All the best...
Syd Rodocker
Tennessee State Department of Education
https://discussions.apple.com/message/15461971#15461971

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
I had absolutely no problems before with Snow Loepard.
I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

After acceessing home screen with assistive touch auto lock is not working in my iphone 4S after upgrading to ios6

Additional testing i perform to make wifi work but nothing works out:
i did re-installing the software using iTunes, reset the network settings restarting the phone. Nothing solves my problem.
wifi was working with older software versions. i think there should be a problem with 8.1.1.
is anyone has fix for this issue?

The search function in App Store, is not working in my iPhone 4, after upgrading to ios6

The search function in App Store, is not working in my iPhone 4, after upgrading to ios6. Does anyone have a solution for this problem?

Having the same problem. No response from Apple as I tried all the suggestions. Had to perform a system restore. Currently iy's working. Make sure you backup everything to your computer. IOS6 is still glitchy in other areas.

I am not able to change the object after upgrade(SPAU Activity).

HI All,
I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
You are not authorized to make changes
Message no. 37202
Diagnosis
You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
There is also a second possibility:
You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
System Response
Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
Procedure
Comsult your system administrator.
Thanks in Advance,
Mahesh Devershetty

Hi,
Does the user who would like to change the screen have the authorisation
for S_DEVELOP in his profile? Please run transaction /NSU53 after the
failed authorisation. You will get an information which authorisation
is missing.
Additional please check if you have open entries in transaction SPAU for
that object.
If you couldn´t solve the issue I need an user to analyse it in your
development system.
That user needs all authorisation for development and has to be
registrated as developer.
The system uses the authorization object S_DEVELOP for Workbench objects
can you please check your user master record whether it contains the
required autorization or not.
Please also ensure that modification adjustment is turned on as per note:
197600 Switching the Modification Assistant off and on
Aidan

Managed Server Startup failed after upgrade to 11.1.1.6 from 11.1.1.4

We tried to upgrade from SOA Suite 11.1.1.4 to 11.1.1.6.
After upgrade when we tried to start our managed servers we get the below error. Did anyone ran into this? If so how did you resolve it?.
Its still referring to some Weblogic 10.3.4 libraries. We were not able to find out where..
<Mar 22, 2012 3:21:29 PM CDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:610)
at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:577)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:482)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
at weblogic.jndi.Environment.getContext(Environment.java:315) Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) Truncated. see log file for complete stacktrace>
The WebLogic Server encountered a critical failure
Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:145) at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:124) at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:427) at weblogic.jndi.Environment.getInitialReference(Environment.java:245) at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:1083) at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:429) at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:415)
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:206) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:482) at weblogic.Server.main(Server.java:71)
Thanks,
Jp

Hi,
I found an oracle note with the next solution:
Add -Xverify:none to the JVM Arguments in the WebLogic console if you're using Node Manager to start managed servers:
1. Go into WebLogic Console
2. Navigate to Environment> Servers> [Sever_name]> Server Start> Arguments
3. Add -Xverify:none to the arguments
4. Restart the WebLogic server
5. Retest the issue.
6. Migrate the solution as appropriate to other environments.
Or
If you're not using Node Manager to start managed servers:
Edit the WebLogic start-up script to add -Xverify:none to the JVM arguments
See if it works for you
Arik

Workflow Not displaying in Data Manager once it is launched ...

I am experiencing a strange problem in Data Manager Workflow Tab. I am using MDM 5.5 SP6.
While importing records either Iby using import Manager OR Import server, workflow is triggered and we can see the workflow in the workflow tab with status 'Unlaunched' and once it is launched it is not displaying any other steps and it disappears after completes the workflow. But all the steps in the workflow completed successfully. Workflow tab is empty for Status = ALL.
This was working fine until few days back.
Anyone experience this issue?
Edited by: Lamp S on Mar 12, 2010 11:24 PM

Hi,
I think it may be because you are using wrong user to check this.
Try to login into Data manager through Workflow Owner User ID.. it should display All workflow jobs there, even completed ones also. and Status = ALL should work there.
The workflow owner has special privileges and visibility. The owner of a workflow is the only user who can see in its task queue for every instance of every step that is available to or received by every other user. I think, other users will see tasks only if it is step is available for them or in received status.
Check and revert with the result.
Regards,
Shiv

SAP Server Manager Error after BPC installation on domain controller

Hi, I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . I think that the application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users).
Thanks

Hi
I have the same issue that you had.
"I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . The application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users)."
Can you please let me know how you solved this ?
thanks & regards
Lokesh

Not able to restart managed servers after password change in console

im doin the following steps,am i doin anything wrong?
1)shutdown all managed servers
2)change pwd in admin console
3)edit boot.properties file with new pwd in admin server
4)copy these boot file to every managed server
5)now restart admin server.(able to do it succesfully)
6)not able to restart managed servers (im getting the following error.
Can any help me out plz very urgent?
<Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
<Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>

Hi,
*1)In order to export the user data on to the server,do we have to create a specific directory to save this data into the server.*
Yes ....you can give any Existing Directory Path in the AdminConsole Export Page.... Any Directory in your File System.
*2)Is there any other way by not exporting or importing the data?*
That is the only way to prevent the Data Loss....There are some other ways to do it without using Admin Console like Using WLST or Using JMX you can export the Data but all these techniques will exactly do the same thing ... The AdminConsole is the easiest way to do it.
Thanks
Jay SenSharma
http://middlewaremagic.com/weblogic/ (Middleware Magic Is Here)

Robo 8 Topic files not displaying in project manager

I am working on a project upgrade and have made new topics in Robo 8 project. When I view the topic files for a particular folder in the Project Manager view only 1/2 of my topics are displayed.. When I look in the folder (behind the scenes), all my topics are there, just not displayed in the Project Manager. What do I need to do? Thanks!.

Peter,
Thanks for your help and suggestions.
I have a project that I tested with RH 8.0.2.208 using the following steps/results.
October 5, 2009 – last date the project was modified – based on the modified date of *.htm files and *.xpj file.
Copied the project.
Opened the copy using *.xpj.
Broken links exist.
Opened a 10-5-2009 copy of the actual HTML help file. Checked one broken link topic. The topic exists in the output and looks correct.
Copied the project again.
Deleted *.cpd.
Open the new copy using *.xpj.
Broken links exist.
Generated (HTML) primary output.
Checked one broken link topic (same as above). Topic content exists, but the screen captures in the topic do not. A red x appears in place of the screen captures.
I do not know how to uninstall only the patch. I looked at Add or Remove programs, and I do not see a stand alone entry for the patch.
To uninstall the patch, do I have to completely uninstall RH 8.0.2 and reinstall the older version fresh? That seems like a major bother. An uninstall and fresh install of the earlier version will likely eliminate some styles and other settings that I have saved.
Is there a way to uninstall just the patch?
As an alternative to uninstalling 8.0.2, I opened a fresh copy of the project (last modified 10-5-2009) on a machine with RH 8.0.203 installed, i.e., a machine without the patches installed.
There were no problem with the project, i.e., no broken links.

Disks Not Displayed in Server Manager 2012 After Upgrade

Similar Messages

Maybe you are looking for