My fone won't ring! All the switches are NOT muted. But it still will ring for sms's and notifications. But NOT when someone calls

My iphone 4 does not ring when a caller is calling

I was having the same problem with my iPhone 4: incoming calls would vibrate in vibrate only mode, but nothing woulld happen in ring mode. I rebooted the phone (hold down the "off" button, until the "slide to Power Off" message comes up) and that fixed the problem.

Similar Messages

My keyboard doens't work correctly when I push numbers it appears symbols and all the letters are not good

My keyboard doens't work correctly when I push numbers it appears symbols and all the letters are not good

I suspect someone or something in your house may have changed a keyboard preference. Try System Preferences - Keyboard - Keyboard tab - uncheck Use all F1......

BlackBerry 9220 all the keys are not working & camera working Automatically

Guys Please Help,
My BlackBerry 9220 all the keys are not working (except end button)& camera working Automatically, i tried to update from desktop manager but the update reaches to 100 % & stucks. I tried 5 time but still it is not updataing. I m fedup from this phone, please help
Regards,
Taj

Hi Taj151286
Welcome to BlackBerry Support Forums
Please run a Self Test on your Device to see if its an hardware issue , follow this Knowledge base :
KB16037 : Using the Self Test application on the BlackBerry smartphone.
If your device fails then you might have to look for warranty or repair options.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

My camera app won't work, all the buttons are grey when I open the camera

when I open my camera, all the buttons are grey so that I can't take a picture, turn on flash, etc.
I can view my pictures taken but that's it.
have restarted it numerous times, no success.
thanks for your help.

Hello there, Johnmr88.
You might want to close out all apps first and foremost:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Then it might be worth attempting a restart of the iPhone, and then a reset, should that not resolve the issue.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the Camera app is still showing greyed out then you may want to try restoring the iPhone.
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

All the subnets are not reachable over the VPN

Hi all,
We have a EZVPN connection to one of our branch office. Connectivity diagram is attached with this discussion.
HO LAN (10.1.0.0/16 & 192.6.14.0/24) --------- ASA5520-------- Internet ---------- Cisco2911-------- LAN of remote location (10.2.0.0/16)
we are using 10.2.0.0/26 subnet at remote office and 10.1.0.0/16 & 192.6.14.0/24 subnets at HO. From HO through 10.1.0.0/16 & 192.6.14.0/24 all the devices are reachable except the firewall which is connected with GigabitEthernet0/2 interface of cisco2911 router(on which VPN is created).
Its a fortigate firewall and it is reachable locally from the network 10.2.0.0/16. I believe its an issue with phase2 ACLs but didn't able to resolve the issue.
I'm not able to take GUI / CLI interfaces of fortigate firewall even i'm not able to ping the IP of GigabitEthernet0/2 interface of cisco2911.
kindly advise on same.
Below is the configuration of ASA5520 of HO and cisco2911 router of branch office
ASA5520:-
access-list inside_access_in extended permit ip 192.6.14.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list inside_access_in extended permit ip 10.1.0.0 255.255.0.0 10.2.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.6.14.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 10.1.0.0 255.255.0.0 10.2.0.0 255.255.0.0
access-list splittunnelacl_JNC_AUH extended permit ip 192.6.14.0 255.255.255.0 10.2.0.0 255.255.0.0
access-list splittunnelacl_JNC_AUH extended permit ip 10.1.0.0 255.255.0.0 10.2.0.0 255.255.0.0
access-list Outside_cryptomap_65534.191 extended permit ip object-group DM_INLINE_NETWORK_103 10.2.0.0 255.255.0.0
jashanmalasa/sec/act# sho run obj
jashanmalasa/sec/act# sho run object-group | b DM_INLINE_NETWORK_103
object-group network DM_INLINE_NETWORK_103
network-object 10.1.0.0 255.255.0.0
network-object 192.6.14.0 255.255.255.0
group-policy AUHNEW internal
group-policy AUHNEW attributes
dns-server value 192.6.14.189 192.6.14.182
vpn-access-hours none
vpn-idle-timeout none
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec
ip-comp disable
re-xauth disable
pfs enable
ipsec-udp disable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value
default-domain value xxxxxx
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout none
ip-phone-bypass disable
leap-bypass disable
nem enable
tunnel-group AUHNEW type remote-access
tunnel-group AUHNEW general-attributes
authorization-server-group LOCAL
default-group-policy AUHNEW
tunnel-group AUHNEW ipsec-attributes
pre-shared-key *****
peer-id-validate nocheck
isakmp ikev1-user-authentication none
Cisco2911:-
Current configuration : 10258 bytes
! Last configuration change at 19:06:18 AST Thu May 8 2014 by admin
! NVRAM config last updated at 19:01:43 AST Thu May 8 2014 by admin
! NVRAM config last updated at 19:01:43 AST Thu May 8 2014 by admin
version 15.1
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname AUHOffice_RTR
boot-start-marker
boot system flash:c2900-universalk9-mz.SPA.151-4.M4.bin
boot-end-marker
card type e1 0 0
no aaa new-model
clock timezone AST 4 0
network-clock-participate wic 0
network-clock-select 1 E1 0/0/0
no ipv6 cef
ip source-route
ip cef
ip name-server 213.42.xxx.xxx
multilink bundle-name authenticated
isdn switch-type primary-net5
crypto pki token default removal timeout 0
voice-card 0
dspfarm
dsp services dspfarm
voice service voip
fax protocol pass-through g711ulaw
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice class h323 1
h225 timeout tcp establish 3
voice translation-rule 1
rule 1 /^9$.*$/ /\1/
voice translation-rule 2
rule 1 /^0$2.......$$/ /00\1/
rule 2 /^0$3.......$$/ /00\1/
rule 3 /^0$4.......$$/ /00\1/
rule 4 /^0$5........$$/ /00\1/
rule 5 /^0$6.......$$/ /00\1/
rule 6 /^0$7.......$$/ /00\1/
rule 7 /^0$9.......$$/ /00\1/
rule 8 /^00$.*$/ /0\1/
rule 9 /^.......$/ /0&/
rule 10 // /000\1/
voice translation-rule 3
rule 1 /^3../ /026969&/
voice translation-profile FROM_PSTN
translate calling 2
translate called 1
voice translation-profile TO_PSTN
translate calling 3
license udi pid CISCO2911/K9 sn xxxxxxxxx
license accept end user agreement
license boot module c2900 technology-package securityk9
hw-module pvdm 0/0
hw-module sm 1
username admin privilege 15 secret 4 Ckg/sS5mzi4xFYrh1ggXo92THcL6Z0c6ng70wM9oOxg
redundancy
controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-10,16
crypto ipsec client ezvpn jashanvpn
connect auto
group AUHNEW key jashvpn786
mode network-extension
peer 83.111.xxx.xxx
acl 150
nat allow
nat acl 110
xauth userid mode interactive
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 10.2.0.1 255.255.255.248
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1430
ip policy route-map temp
duplex auto
speed auto
crypto ipsec client ezvpn jashanvpn inside
h323-gateway voip interface
h323-gateway voip bind srcaddr 10.2.0.1
interface GigabitEthernet0/1
description *** Connected to 40MB Internet ***
no ip address
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface GigabitEthernet0/2
ip address 10.2.0.11 255.255.255.248
duplex auto
speed auto
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface SM1/0
ip unnumbered GigabitEthernet0/0
service-module ip address 10.2.0.3 255.255.255.248
!Application: CUE Running on SM
service-module ip default-gateway 10.2.0.1
interface SM1/1
description Internal switch interface connected to Service Module
no ip address
interface Vlan1
no ip address
interface Dialer0
description *** JASHANMAL 40MB Internet ***
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxxx
ppp chap password 7 0252150B0C0D5B2748
ppp pap sent-username xxxxxx password 7 15461A5C03217F222C
crypto ipsec client ezvpn jashanvpn
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source route-map nonat interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.2.0.0 255.255.248.0 10.2.0.2
ip route 10.2.0.3 255.255.255.255 SM1/0
ip route 10.2.6.1 255.255.255.255 10.2.0.2
ip route 10.2.7.1 255.255.255.255 10.2.0.2
ip route 172.16.5.0 255.255.255.0 10.2.0.2
access-list 100 deny   ip 10.2.4.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 100 deny   ip 10.2.4.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 100 deny   ip 10.2.4.0 0.0.0.255 10.1.50.0 0.0.0.255
access-list 100 deny   ip 10.2.4.0 0.0.0.255 10.1.2.0 0.0.0.255
access-list 100 deny   ip 172.16.5.0 0.0.0.255 10.1.6.0 0.0.0.255
access-list 100 permit ip 10.2.4.0 0.0.0.255 any
access-list 100 permit ip 172.16.5.0 0.0.0.255 any
access-list 110 deny   ip 10.2.0.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny   ip 10.2.2.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny   ip 10.2.3.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny   ip 10.2.1.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny   ip 10.2.5.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny   ip 10.2.5.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny   ip 10.2.3.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny   ip 10.2.2.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny   ip 10.2.1.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny   ip 10.2.0.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny   ip 10.2.4.0 0.0.0.255 10.1.9.0 0.0.0.255
access-list 110 deny   ip 10.2.4.0 0.0.0.255 10.1.50.0 0.0.0.255
access-list 110 deny   ip 10.2.4.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 110 deny   ip 10.2.4.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny   ip 10.2.4.0 0.0.0.255 10.1.2.0 0.0.0.255
access-list 110 deny   ip 10.2.6.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 110 deny   ip 10.2.6.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny   ip 10.2.6.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny   ip 172.16.5.0 0.0.0.255 192.6.14.0 0.0.0.255
access-list 110 deny   ip 172.16.5.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny   ip 172.16.5.0 0.0.0.255 10.1.9.0 0.0.0.255
access-list 110 deny   ip 172.16.5.0 0.0.0.255 10.1.50.0 0.0.0.255
access-list 110 deny   ip 172.16.5.0 0.0.0.255 10.1.15.0 0.0.0.255
access-list 110 deny   ip 172.16.5.0 0.0.0.255 10.1.2.0 0.0.0.255
access-list 110 permit ip host 10.2.6.1 any
access-list 110 permit ip host 10.2.6.2 any
access-list 110 permit ip host 10.2.6.3 any
access-list 110 permit ip host 10.2.6.4 any
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 86.96.201.72 eq 10008
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 86.96.254.136 eq 10008
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 216.52.207.67 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.151.22 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.148.22 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.149.22 eq www
access-list 110 permit tcp 10.2.0.0 0.0.255.255 host 199.168.150.22 eq www
access-list 110 permit tcp 172.16.5.0 0.0.0.255 any
access-list 150 permit ip 10.2.4.0 0.0.0.255 any
access-list 150 permit ip 10.2.0.0 0.0.0.255 any
access-list 150 permit ip 10.2.1.0 0.0.0.255 any
access-list 150 permit ip 10.2.2.0 0.0.0.255 any
access-list 150 permit ip 10.2.3.0 0.0.0.255 any
access-list 150 permit ip 10.2.5.0 0.0.0.255 any
access-list 150 permit ip 10.2.6.0 0.0.0.255 any
access-list 150 permit ip 172.16.5.0 0.0.0.255 any
access-list 150 permit ip 10.2.7.0 0.0.0.255 any
route-map temp permit 100
match ip address 100
set ip next-hop 10.2.0.9
route-map temp permit 110
route-map nonat permit 10
match ip address 110
snmp-server community xxxxxxxx
snmp-server location JNC AbuDhabi Office
snmp-server contact xxxxxxxx
snmp-server enable traps tty
snmp-server enable traps cpu threshold
snmp-server enable traps syslog
snmp-server host xxxxx version 2c jash
control-plane
voice-port 0/0/0:15
translation-profile incoming FROM_PSTN
bearer-cap Speech
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
mgcp profile default
dial-peer cor custom
name CCM
name 0
name 00
dial-peer cor list CCM
member CCM
member 0
member 00
dial-peer cor list 0
member 0
dial-peer cor list 00
member 0
member 00
dial-peer voice 100 voip
corlist incoming CCM
preference 1
destination-pattern [1-8]..
session target ipv4:10.1.2.12
incoming called-number [1-8]..
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 101 voip
corlist incoming CCM
huntstop
preference 2
destination-pattern [1-8]..
session target ipv4:10.1.2.11
incoming called-number [1-8]..
voice-class codec 1
voice-class h323 1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 201 pots
corlist outgoing 0
translation-profile outgoing TO_PSTN
destination-pattern 0[1-9]T
incoming called-number .
direct-inward-dial
port 0/0/0:15
dial-peer voice 202 pots
corlist outgoing 0
translation-profile outgoing TO_PSTN
destination-pattern 00[1-9]T
incoming called-number .
direct-inward-dial
port 0/0/0:15
prefix 0
dial-peer voice 203 pots
corlist outgoing 00
translation-profile outgoing TO_PSTN
destination-pattern 000T
incoming called-number .
direct-inward-dial
port 0/0/0:15
prefix 00
gateway
timer receive-rtp 1200
gatekeeper
shutdown
call-manager-fallback
secondary-dialtone 0
max-conferences 8 gain -6
transfer-system full-consult
timeouts interdigit 4
ip source-address 10.2.0.1 port 2000
max-ephones 58
max-dn 100
system message primary Your Current Options SRST Mode
transfer-pattern .T
alias 1 300 to 279
call-forward pattern .T
time-zone 35
date-format dd-mm-yy
cor incoming 0 1 100 - 899
line con 0
password 7 030359065206234104
login local
line aux 0
password 7 030359065206234104
login local
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password 7 110E1B08431B09014E
login local
transport input all
line vty 5 15
password 7 030359065206234104
login local
transport input all
scheduler allocate 20000 1000
ntp master 1
end

Attached is the result from packet tracer of ASA5520-ASDM

HT1386 I deleted all my photos in the Camera Roll folder,I created separate folders containing all my pisctures. When I sync my iPhone it shows that all the pictures are loaded. But nothing displays on my phone?

Hey Guys,
I need some advice. I had about 9000 pitures and photos in my camera roll folder.
I wanted to manage all these pictures into separate folders for easier access.
I imported all the pictures onto my pc, and created and managed the pics.
I synced the phone and excluded the photos,as advised on the site.
The I disconnected the phone, connected again and included the pictures.
On the coclour tab it indicates that all the pictures are there, after syncing,
but on my phone, nothing appears.
Am I doing something wrong? Is there another way of importing my pictures
onto the phone and keeping the separate folders?
Thanks,

If you don't find an iTunes backup as suggested above, another possibility is that the phone was setup to automatically back up to iCloud. You can go to Settings > iCloud > Storage & Backup > Manage Storage to see if your device name is listed there. If it is, the section titled "How do I restore an iCloud Backup if my device is already set up for use?" in the following link gives directions on how to resore it: http://support.apple.com/kb/TS4036
Also, I'm sorry to hear you lost 5 years of pictures. Having them in one place (as you unfortunately found out) is not a good idea as all kinds of things can happen including loss of the phone. If you have a computer it is a good idea to periodically import them to the computer where you can see that they have successfully transferred to a second location. Following is instructions on how to do that if you want to in the future: http://support.apple.com/kb/ht4083

All the cubes are not visible in cube browser of Voyager

Hi
After following the steps below:
1. Login to Central Mangagement Console.
2. Click on Voyager Connection to see the list of avaliable connection.
3. Click on New button(present below the manage menu) to create a connection.
4. Give name and chose the type of server you want to connect from the providers list.
5. Now Give the server name and click on connect button.
6. Give the username and password and click on ok
7. Select the cube you want connect from the cube browser and click on OK button.
I am not viewing all the cubes in cube browser. Do I have to make any setting/ maintain in BI to view the cubes in cube browser.
Any suggestion/solution?
Thanks
Debasish

Hello Debasish,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

All the properties are not displying for the View Object

i my one of the view Object it is only showing the properties
Values
Lable
Render values
I want to use text box (Input box )...but it is not showing in the property window
why it is not showing the all the properties for the that view Object.
Is it a read only view object ? if so then how to change it

This question is confusing.
You talk about properties, suggesting attribute properties are not showing up in the view object editor. Then you talk about a read-only view object, which suggests you talk about a running application?
Normally a view object is updatable when it is based on an entity object and when on the entity object tab of the view object editor (the page in which you select the entity object) the updatable checkbox has been checked.
But being updatable as such is not why attributes would not show up in a screen.
Can you be more specific, and also tell us what JDeveloper version you are working with?
Jan Kettenis

TS1718 Purchased Eagles Desparado Album All the songs are not fully downloaded

I just purchased Eagles "Desparado " album and though my library says they are fully downloaded ,they are not.Tred to download one song and stillget the same result ,patial download Updated i pod and i Tunes to no avail Please help

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

I have a split screen with two site. All the suggestions are not working.

Everytime I load Firefox, I get a split screen with two sites on it.
I have tried the resetting of home page and clicking off the icon to not show the site selection page.
I have facebook on the left and it cannot be expanded bigger than a panel. I have a 3/4 screen of what ever web site I wanted to load.
How do I turn this off?
Nothing is working and I cannot imagine how it happened.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the Properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Cmd+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
Make sure that "Load this bookmark in the sidebar" is not selected.<br />

GR/IR clearing all the documents are not clearing

Dear Experts,
In ob74 i have the following setings for my GR IR clearing a/c
EBELN
EBELP
GSBER
VBUND
ZUONR
My client is using F.13 clearing function. But in that some entries are not clearing.
Example of that
Assignment               Docment no. TYPE Pk   Doc date   Psng Date Amount in DC Cur           Amt in Loc   Cur Lcu Reference
450002593900002   5000004774      WE   50 26.5.2009   8.6.2009   2785.59-          SAR       2785.59-       sar
450002593900002   5100006581      RE    40 07.11.2009 6.12.2009 2785.89-        SAR       2785.59-       sar
Here assignemnt field is same and amount in DC is also same but can you please let me know the why it is not cleared.
Thanks
Bhaskar

Hi Thank for the reply.
In my goods receipt document
entry is creating like
81 Material
96 GR/IR
50 GR/IR
and invoice
31 vendor
40 GR/IR clearing
Can you please let me know how to crate these type of entries
why it is getting created only these entries are not getting cleared thru F.13
Waiting for your reply.
Thanks
Bhaskar

My iphone screen is black and all the buttons are not working

The screen of my iPhone 4 suddenly went irresponsive and within a few seconds it went completely black. I tried to power it off and also tried the home button but nothing seems to be responding.
Incoming calls still ring out but I am not able to answer the calls and cannot see anything on the screen.
I connected it to my laptop, the iphone appears on "my computer" and I was able to see pictures and videos that are on the phone, however iTunes cannot detect the devise.
Any help please?
Thanks

The phone is now working
I followed the steps in the below link
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks

HT201359 Suddenly for the past 3 months ,I am unable to buy anything through my visa credit card in iTunes store as well as in google play store, all the transactions are getting declined.But Iam able to buy in other sites using the same credit card. Pls

For the past 3 months I am unable to buy anything in I tune store as well as google play store using visa credit card.
It is getting declined in these stores only.
In all other online stores I am able to buy with the same credit card for eg. in e bay
Guide me.

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

So in this updated version of Pages under share all the options are not there

In the previous version of Pages, you could always click on share and then click on email and they would give you option of PDF, word, pages, etc. Now there is not an email option. I have to save it as a word document and then find it under finder and then attach it to an email, Many more steps. This has got to be a mistake

There are too many versions of Pages, and OS X in play now to speak in generalities such as in the previous version of pages.
On OS X Yosemite, with Pages v5.5 (requirement), the appropripate Sharing menu structure to send a document via Mail remains (as it was in Pages v5.2.2 on Mavericks). Once you click on Mail, a new sheet slides down, offering PDF, Word, etc.

URL'S of all the pages are not shown by aurora 12.0a2. on opning and browsing the net

URL'S of my firefox has been gone. i cant see the url's of the pages. please suggest how can i make the url's appear again.

If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

My fone won't ring! All the switches are NOT muted. But it still will ring for sms's and notifications. But NOT when someone calls

Similar Messages

Maybe you are looking for