My forwart text feature on IOS 8 keeps disappearing and the only way I know how to make it re-appear is by powering off and on my phone, is there another way to fix this feature?

my forward text message feature on IOS8 keeps disappearing and the only way I know to make it re-appear is by powering off and on my phone. Is there any other way to fix this?

I should also point out that when I connect my iPhone, it DOESN'T appear as a connected drive on the desktop. Not sure how this can be so, since the iPhone also has a drive and also functions as an iPod if I want it to. I must have changed some setting to achieve this non-appearance, but don't remember what I must have done.
What's the secret?

Similar Messages

HT4061 I forgot my 4 digit lock passcode & now cannot get into the 4S iphone - Is the ONLY way to fix this to restore to factory settings? I haven't synced my phone to my computer in a loooong time -

I setup my 4 digit lock & now cannot login (thought it was what I wrote but not working; I have not synched my computer w/my Iphone in a
long time- is restoring to factory settings the ONLY way to unlock this? (arrggghh). Any help is greatly appreciated.

Yes, that's correct.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

I have an issue with Acrobat, after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical.

I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

. I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
What kind of media files are that?
For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
* https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.

WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know

I can get video on airplay anytime but i cannot get audio all the time. in sound output i select airplay but it only reverts back to internal speakers. same if i try earbuds. the only way to fix it is to restart computer. what do i do to fix it,

I can get video on airplay anytime but i cannot get audio all the time. in sound output i select airplay but it only reverts back to internal speakers. same if i try earbuds. the only way to fix it is to restart computer. what do i do to fix it,

In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
Switch off Mac
Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
Switch off Mac again
Remove power cord and wait 15 seconds
Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

I wish to upgrade my Macbook Pro to ML from SL but told the only way to do this is by downloading thru App store. Is it possible to copy ML on a USB and upgrade that way. I would like to have a back up of the OS just in case i have a problem later. Help!

I wish to upgrade my Macbook Pro to ML from SL but told the only way to do this is by downloading thru App store. Is it possible to copy ML on to a USB and upgrade that way. I would like to have a back up of the OS installation files just in case i have a problem later. Please help me!

You can create an install disc but you would have to download Mountain Lion to do so..
How to create an OS X 10.8 Mountain Lion install drive | MacFixIt - CNET Reviews
And make sure your Mac can upgrade to Mountain Lion.
See Step 1, 2, and 3, here > Apple - Upgrade your Mac to OS X Mountain Lion.

When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer. It then attempts to install the printer software, which is already installed. The only way to fix it is to unplug the printer. Any thoughts?

When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer. It then attempts to install the printer software, which is already installed. The only way to fix it is to unplug the printer. Any thoughts?

Turn the printer off.

I need to move my library to a new computer. This is music downloaded from CD's. Is the only way to do this is to sync all songs to my ipod and they transfer them to the new computer?

I need to move my library to a new computer. my music is downloaded CD's. Is the only way to do this to sync all songs to the ipod and them sync to new computer. the new computer is already authorized.

If using a Mac, use Migration Assistant to move your iTunes library from old computer to new. Afterwards you can sync from your new computer to your iPod.
Migration Assistant tips and tricks

TS1456 What if I don't want to lose everything on my iPod?? Is restoring the only way out of this situation??

What if I don't want to lose everything on my iPod?? Is restoring the only way out of this situation??

If this program will not get the iPod out of recovery mode then you will have to restore and thus erase the iPod.
RecBoot: Easy Way to Put iPhone into Recovery Mode

When watching a program or film, the video will go black, but the audio will keep playimg. The only way to get picture back is to turn the tv off then on.

When watching a program or film, the video will suddenly fo black, but the audio will keep playing. The only way to get picture back is to turn the tv off then on. Whats going on?

Welcome to the Apple Community.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports 720p (Apple TV 2)
Try the Apple TV with another TV

I have the Iphone 5, and it shuts off randomly and the screen glitches. I have taken it into verizon and had it reset but the problem still continues. Is the only way to fix the problem to get a new phone?

I have the Iphone 5, and it shuts off randomly and the screen glitches. I have taken it into verizon and had it reset but the problem still continues. Is the only way to fix the problem to get a new phone? Also, why is it if I do need a new phone I can only get a refurbished one when I am paying insurance every month?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation.

I bought a Macbook Pro second hand and their is a line on the screen, what is the best way to fix this?

I bought a macbook pro from a cash converters store. It was online and in the description didn't mention anything about this issue. I can't really explain it very well so here is a picture.
http://i839.photobucket.com/albums/zz318/donnam1993/photo-2.jpg
Is there any way to fix this, if at all? I don't really know very much about macbooks and since i just got this yesterday i have no idea what caused this. Thank you very much for your help.

It's difficult to determine if your photograph shows a smudge on the exterior of the display, or if it is a display anomaly. Turn up the brightness. If the image changes it's a display problem.
You can clean the first one, but if it's the latter it is a hardware defect that will require parts, tools, labor or money to fix.

HT4623 the "Do not Disturb" option started to show the moon always regardless the change of time since 1-1-2013 the only way to avoid this is to turn this option OFF

I am used to scheduale the "Do not disturb" option since i updated to IOS 6.0.1 but in the first day of 2013 i notice =d the moon since is continuing to show on the screen i tried to change the time ans well as the scheduale but still the moon sign showing. turning off this option is the only way to get rid of the moon sign off and to be able to receive call.
any idea why this happening and if anybody else have noticed and if there is a way to get this feature working properly?

Hello
Same probleme on this end since a couple days.
Found this link which seems to reference directly to an apple posting.......so patience, help is on the way.....
http://daily.bhaskar.com/article/GAD-do-not-disturb-will-be-corrected-after-7th- january-4135870-NOR.html

Central 5.4 stops printing, a reboot of the server is the only way to fix the problem

Hi, We are running central 5.4 on windows 2000 SP4, this has worked for ages but has just started with an intermittent fault. When we send some output it suddenly stops printing, and no forms sent to central will be printed, the only way to get them to print is to reboot the server, stopping and starting central has no effect. there seems to be no errors (event viewer etc)apart from below errors in log file 2005/05/11 11:20:43 D:\jfsrvr\jfserver.exe: [308]Sleeping for 5 seconds. 2005/05/11 11:20:48 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Control\'. 2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Data\'. 2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [306]Processing file 's43719.dat', '^job miteksopr'. 2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [307]Launching task '"D:\jfsrvr\jfmerge" MITEKSOPR.mdf D:\jfsrvr\Data\s43719.dat -l -apr -allD:\jfsrvr\jfserver.log -asl1 -amq0 -amsD:\jfsrvr\Mst\Despatch.mst -m1T -z"HP2280" -axfon -aiiD:\jfsrvr\jfmerge.ini'. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [125]* Processing data file: 'D:\jfsrvr\Data\s43719.dat'. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [289]MDF file `d:\jfsrvr\forms\MITEKSOPR.mdf' opened. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](6) The handle is invalid. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [3016]Error, unable to obtain document properties. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [3008]Error, unable to get info about device 'HP2280' attached to port '<nil>'. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](183) Cannot create a file when that file already exists. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [2]Error opening output device/file 'HP2280'. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](6) The handle is invalid. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [3018]Error ending page on printer. 2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [210]Nothing was printed. 2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [314]Agent exit message: [3018]Error ending page on printer. 2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [312]Warning: skipping disabled task JfError. 2005/05/11 11:20:49 D:\jfsrvr\jfserver.exe: [308]Sleeping for 5 seconds. 2005/05/11 11:20:54 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Control\'. 2005/05/11 11:20:54 D:\jfsrvr\jfserver.exe: [305]Scanning for data files, directory 'D:\jfsrvr\Data\'. 2005/05/11 11:20:54 D:\jfsrvr\jfserver.exe: [308]Sleeping for 5 seconds.

2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [125]* Processing data file: 'D:\jfsrvr\Data\s43719.dat'.
2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [289]MDF file `d:\jfsrvr\forms\MITEKSOPR.mdf' opened.
2005/05/11 11:20:49 D:\jfsrvr\jfmerge: [400](6) The handle is invalid

My forwart text feature on IOS 8 keeps disappearing and the only way I know how to make it re-appear is by powering off and on my phone, is there another way to fix this feature?

Similar Messages

Maybe you are looking for