My i-sight camera hasn't worked for a bit so I bought a logitech external...it works fine on photo booth but i-movie won't recognize it?
Can anyone offer a solution? Also, how do I get the video on photo booth to "flip" as it records video backwards.
Welcome to the Apple Community.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option which is revealed in the iTunes app on your iOS device by tapping the more button at the bottom of the screen.
Similar Messages
-
I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. The cable as well as the iPod, is covered by the warranty.
Apple Retail Store - Genius Bar -
my i phone 4s camera is not working... tried everything but of no use...may be the hardware issues.Then how to resolve it? warranty is void..suggest please!!!!!!!
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). If each of these has been tried and the issue still occurs, the only option left is to take to Apple for evaluation and possible replacement.
Out of Warranty replacement is $199US. -
HT4623 I can't get my camera to work, or my Photo Booth. Any sugestion
I can't get my camera to work,or my Photo Booth. Any sugestion
Close all apps on your iPad and reset the device.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!
12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411 -
Is there a way to print from ipad 4 to a non AirPrint printer?
I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
Is there an app for this or adaptors which could work?
Thank, RicPrintopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
Canon Easy-PhotoPrint
Canon Mobile Printing
PIXMA Printing Solutions -
iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?
Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.
-
Have base station and added extender for downstairs. Worked great upon initial setup, but now it won't connect despite an "excellent" signal. All i get is a blinking amber light; only get green if I bring it into the same room as the base. Both units are the latest models; purchased 2 months ago. What's wrong? Thanks!!
Power off both the AirPort Extreme and AirPort Express
Wait a minute
Power up the AirPort Extreme and let it run for a few minutes
Now locate the AirPort Express about half way between the AirPort Extreme and the general area where you need more wireless signal coverage, and report on your results.
The more that you can minimize obstructions between the AirPorts like walls, ceilings, etc. the better the wireless will operate. -
My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?
Sign her out and sign yourself in!
-
Workbook works fine in discoverer plus but shows error in discoverer viewer
Hi,
I have some issues with the parameter of a report.
one of the parameters is
mgr_id (eg: 1,2,3) -- from database table.
manager names are not available in the database but they are known to users like
1 - david
2 - alan chris
3 - peter
so the requirement is
(i) the input parameter wud be entered as 1 or 2 or 3 or null ( or in multiple combination or all).
But the report shud have parameters in the header of the report.
for eg: if the input parameter is mgr_id = '1' then the report shud have manager name: 'david' in the header.
if the input is mgr_id = '1',' 2', '3' then on the report header, it shud display as manager name: 'david','alan chris','peter'
(ii) the default value of mgr_id shud be 'ALL'. if the user enters mgr_id as 'ALL' then it shud take all the values of mgr_id and pull all the values of mgr_id (like 1,2,3)
and the report header shud display as department name: 'ALL'
i have developed a custom query where i used,
select dept_id, decode(mgr.mgr_id,'1','david','2','alan chris','3','peter') as mgr_name, ..... etc.
in discoverer admin,
I have created LOVs (item classes) for mgr_name.
after that going to properties of mgr_name, i have selected mgr_id as indexed item.
and in the report i have created parameter dept based on mgr_name and selected the option -- allow to select both indexes and values.
and in the default value i mentioned 'ALL'.
after that i changed the condition as
((mgr_name = :manager name) OR (mgr_name LIKE DECODE(:manager name,'ALL','%')))
and in the header, i used &department name --- then it displays correctly.
but the problem is ---
the report works fine in plus. the problem is only when parameter value is 'ALL'
when i run the report from discoverer viewer for the very first time (after logging in), the report works fine with correct data.
but when i run the same report second time with parameter value 'ALL', it gives an error ---
Invalid value "''" for parameter "department name"
i dont understand, why it works for first time and doesn't afterwards. If i logout and login again, it works fine in viewer.
am i doing anything wrong in conditions or declaring the parameters?
I came to know that, the very first time, when we enter 'ALL' it is taking '%' but when we run for the second time, it is taking NULL. since NULL isn't there in mgr_id or mgr_name, it is throwing that error.
How do i fix this error?
ThanksHi Puppethead,
I have tried with your suggestions.
the following condition -- did not work
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(:manager name, 'ALL', '%', NULL)))
but for the other condition ---
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(nvl(:manager name, 'ALL'), 'ALL', '%', NULL)))
is wrong because, :manager name cud be null, when it is null, it takes 'ALL' i.e. '%' which shud not be the case.
if the user enters null, it has to display records with null only but with the above condition it takes '%'
The main issue which i dont understand is, the report works fine for the first time. for the second time, the report takes null values . why is it taking null values for the second time.
Thanks -
Isight works with photo booth but not in ichat or google talk or skype?
isight works with photo booth but not in ichat or google talk or skype?
Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My beats studio 2013 work fine on my ipad but the mic/ volume control doesn't work on my iphone 5
My beats studio 2013 work fine on my ipad but the mic/ volume control doesn't work on my iphone 5. Can anyone help me?
Thanks, daniel.early79!
I have an iPhone5 bought in late Dec 2012.
I've noticed on rare occassions that the volume down button some times would not respond.
Starting yesterday, the volume down button would not respond more consistently.
Sometimes a reset would fix it, sometimes a reset network would fix it, but the problem would come back.
Came across this thread, and pressing gently on the upper right hand corner fixed it!
I remember seeing some video on Youtube or iFixit that shows how to replace the power button. It appears that the volume buttons and the power buttons are tied in together on the same piece of connector. I supposed taking the iphone in and out of cases may have warped or twisted the connector inside the case ever so slightly that the sensor for the down volume button got shifted.
The down volume button works now, after doing the trick you suggested. I'll wait and see if it comes back before taking it in for warranty repair. -
ANT Deployment issue. works fine in one environment but fails in other
Hi,
Ant script is working fine in Dev environment but is failing in the other environment. Somehow the BPEL server is not able to pick the latest deployed process , due to this the dependent BPEL processes are failing. If we restart the server , it moves forward and then fails at the point where it couldn’t find reference to the processes deployed after restart. Restarting the server at every failed interval will deploy all the BPEL processes which is not the solution.
example : we have BPEL Processes say A, B, C, D and E. A,B are independent processes C is dependent on A, D is independent and E is dependent on D. So I have Ant script to deploy in A,B,C,D,E order. Now I run the Ant Script: It deploys A,B processes and Fails at C saying it couldn't find the process A.wsdl(But A is deployed). So if i restart now it recognizes A and B are deployed so C is also deployed succesfully it also deploys D as it is Independent but fails at E. If i restart the server E is also deployed.
The Environment is clustered.
Any suggestion to make my Ant script to run at a go will be highly appreciated
Thanks
KrishnaHi KrishnaBhaskarla,
I have something related to ant script, Can you please provide me the steps for deploying applications using ant script.
Regards
Kumar -
i have an itunes library with 1,000+ songs on a pc. my daughter has a macbook air and i loaded my apple ID onto it. how do i get the songs from my itunes account to show up? This works fine on her iPhone, but having trouble on the new macbook air
Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Text Index works fine consistently with Table, but not on underlying View
Hi,
We are facing weird issue relating to Oracle Text Indexes. Search using Oracle Text Index
works fine on a Table, but when running query on View it gives sometimes (not consistently)
ORA-20000: Oracle Text error:
DRG-10849: catsearch does not support functional invocation
DRG-10599: column is not indexed
Sometimes it works.
All of the below steps are run using User IR2OWNER:
STEP 1: Table CPF_CUSTOMER created as follows (3 Non Text Indexes defined at time of creation )
**Please note no Public Synonym is created for this Table**
** There is already another Table by same name CPF_CUSTOMER under different Owner (CDROWNER)
and that Table has Public Synonym CPF_CUSTOMER created. Other Table CPF_CUSTOMER does not
have any Views **
create table CPF_CUSTOMER
CPF_CUSTOMER_UUID NUMBER(20) not null,
SAP_ID VARCHAR2(10 CHAR) not null,
IRIS2_ID VARCHAR2(7 CHAR),
NAME VARCHAR2(70 CHAR) not null,
DRAFT_IND NUMBER(1) not null,
ACTIVE_IND NUMBER(1) not null,
REPLACED_BY_CUST VARCHAR2(10 CHAR),
CRE_DT_GMT DATE,
CRE_DT_LOC DATE,
TIME_ZONE VARCHAR2(3 CHAR),
CRE_USR VARCHAR2(8 CHAR),
CHG_DT_GMT DATE,
CHG_DT_LOC DATE,
CHG_TIME_ZONE VARCHAR2(3 CHAR),
CHG_USR VARCHAR2(8 CHAR),
VFY_DT_GMT DATE,
VFY_DT_LOC DATE,
VFY_USR VARCHAR2(8 CHAR),
DIVISION VARCHAR2(20 CHAR),
SALES_ADMIN VARCHAR2(3 CHAR),
MF_CUST_CDE VARCHAR2(14 CHAR),
CR_CTRL_OFCE VARCHAR2(3 CHAR),
DEFAULT_INV_CCY VARCHAR2(3 CHAR),
AUTOBILL_OVRRD_IND NUMBER(1) not null,
AUTOBILL NUMBER(1) not null,
AUTOPRT_OVRRD_IND NUMBER(1) not null,
AUTOPRT NUMBER(1) not null,
AVE_PYMT_DAY NUMBER(3),
TTL_INV_VAL NUMBER(12,2),
INHERIT_CR_TERM_ASSGMT NUMBER(1) not null,
NORMALIZED_NME VARCHAR2(70 CHAR),
OB_PYMT_OFCE VARCHAR2(3 CHAR),
IB_PYMT_OFCE VARCHAR2(3 CHAR),
CGO_SMART_ID VARCHAR2(20 CHAR),
REC_UPD_DT TIMESTAMP(6),
NCPF_CUST_ID VARCHAR2(7) not null,
CPF_CUST_LEVEL_UUID NUMBER(20) not null
tablespace DBCPFP1_LG_DATA LOGGING;
CREATE UNIQUE INDEX CPF_CUSTOMERI1 ON CPF_CUSTOMER
(SAP_ID ASC) TABLESPACE DBCPFP1_LG_INDX;
ALTER TABLE CPF_CUSTOMER
ADD CONSTRAINT CPF_CUSTOMERI1 UNIQUE (SAP_ID);
CREATE UNIQUE INDEX CPF_CUSTOMERI2 ON CPF_CUSTOMER
(CPF_CUSTOMER_UUID ASC) TABLESPACE DBCPFP1_LG_INDX;
ALTER TABLE CPF_CUSTOMER
ADD CONSTRAINT CPF_CUSTOMERI2 UNIQUE (CPF_CUSTOMER_UUID);
CREATE INDEX CPF_CUSTOMER_IDX2 ON CPF_CUSTOMER (UPPER(NAME))
TABLESPACE DBCPFP1_LG_INDX;
STEP 2: Create View CPF_CUSTOMER_RVW on above Table (and Public Synonym on View)
This View is created under same OWNER as Table created in STEP 1 (IR2OWNER)
create or replace view cpf_customer_rvw as
select
CPF_CUSTOMER_UUID,
SAP_ID,
IRIS2_ID,
NAME,
DRAFT_IND,
ACTIVE_IND,
REPLACED_BY_CUST,
CRE_DT_GMT,
CRE_DT_LOC,
TIME_ZONE,
CRE_USR,
CHG_DT_GMT,
CHG_DT_LOC,
CHG_TIME_ZONE,
CHG_USR,
VFY_DT_GMT,
VFY_DT_LOC,
VFY_USR,
DIVISION,
SALES_ADMIN,
MF_CUST_CDE,
CR_CTRL_OFCE,
DEFAULT_INV_CCY,
AUTOBILL_OVRRD_IND,
AUTOBILL,
AUTOPRT_OVRRD_IND,
AUTOPRT,
AVE_PYMT_DAY,
TTL_INV_VAL,
INHERIT_CR_TERM_ASSGMT,
NORMALIZED_NME,
OB_PYMT_OFCE,
IB_PYMT_OFCE,
CGO_SMART_ID,
NCPF_CUST_ID,
CPF_CUST_LEVEL_UUID,
REC_UPD_DT
from CPF_CUSTOMER;
CREATE OR REPLACE PUBLIC SYNONYM CPF_CUSTOMER_RVW FOR CPF_CUSTOMER_RVW;
STEP 3: Insert Test row
insert into cpf_customer (CPF_CUSTOMER_UUID, SAP_ID, IRIS2_ID, NAME, DRAFT_IND, ACTIVE_IND, REPLACED_BY_CUST, CRE_DT_GMT, CRE_DT_LOC, TIME_ZONE, CRE_USR, CHG_DT_GMT, CHG_DT_LOC, CHG_TIME_ZONE, CHG_USR, VFY_DT_GMT, VFY_DT_LOC, VFY_USR, DIVISION, SALES_ADMIN, MF_CUST_CDE, CR_CTRL_OFCE, DEFAULT_INV_CCY, AUTOBILL_OVRRD_IND, AUTOBILL, AUTOPRT_OVRRD_IND, AUTOPRT, AVE_PYMT_DAY, TTL_INV_VAL, INHERIT_CR_TERM_ASSGMT, NORMALIZED_NME, OB_PYMT_OFCE, IB_PYMT_OFCE, CGO_SMART_ID, NCPF_CUST_ID, CPF_CUST_LEVEL_UUID, REC_UPD_DT)
values (2.26283572796028E15, '6588125000', '6588125', 'S M Mooseen And Sons(PVT) Limited', 0, 1, '', to_date('15-03-2005 08:55:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('15-03-2005 14:25:00', 'dd-mm-yyyy hh24:mi:ss'), 'IST', 'licr2', to_date('19-02-2007 00:33:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('19-02-2007 06:03:00', 'dd-mm-yyyy hh24:mi:ss'), 'IST', 'BaseAdmi', to_date('15-03-2005 09:03:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('15-03-2005 14:33:00', 'dd-mm-yyyy hh24:mi:ss'), 'ninwasa', '', '', 'SRI06588125000', '463', '', 0, 0, 0, 0, null, null, 0, 'SMMOOSEENANDSONSPVTLIMITED', '', '', '', '6588125', 109966195050333, '14-JAN-09 02.49.28.325774 PM');
commit;
STEP 4: Create Oracle Text Index on Table CPF_CUSTOMER
EXEC CTX_DDL.DROP_PREFERENCE('CTXCAT_IR2_STORAGE');
EXEC CTX_DDL.CREATE_PREFERENCE('CTXCAT_IR2_STORAGE', 'BASIC_STORAGE');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'I_INDEX_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'I_INDEX_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'K_TABLE_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'R_TABLE_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'I_ROWID_INDEX_CLAUSE', 'TABLESPACE COMMON_SM_INDX storage (INITIAL 5M)');
-- Define IR2_AB_LEXER to handle Special Characters.
EXEC ctx_ddl.drop_preference('IR2_AB_LEXER');
EXEC ctx_ddl.create_preference('IR2_AB_LEXER', 'BASIC_LEXER');
EXEC ctx_ddl.set_attribute ('IR2_AB_LEXER', 'printjoins', ',_!$~%?=({;|&+-:/)}.@`^');
--Drop Indexes
drop index CPF_CUSTOMER_DIDX1;
-- CATSEARCH INDEX on CPF_CUSTOMER.NAME
CREATE INDEX CPF_CUSTOMER_DIDX1 ON CPF_CUSTOMER(NAME) INDEXTYPE IS CTXSYS.CTXCAT PARAMETERS ('STORAGE CTXCAT_IR2_STORAGE STOPLIST CTXSYS.EMPTY_STOPLIST LEXER IR2_AB_LEXER');
commit;
STEP 5: Run Query to use Oracle Text Index on Base Table (works fine always. No issues seen so far)
SELECT a.sap_id||'|'||a.name||'|' CUSTOMER_STR
FROM cpf_customer a
WHERE (catsearch(a.name, 'Mooseen'||'*', '')>0);
CUSTOMER_STR
6588125000|S M Mooseen And Sons(PVT) Limited|
STEP 6: Run Query to use Oracle Text Index on View created under Table (get below error periodically)
ORA-20000: Oracle Text error:
DRG-10849: catsearch does not support functional invocation
DRG-10599: column is not indexed
But it works sometimes as in STEP 5 and returns 1 row. It is never consistent. We would like to
provide access to this Table using View only. That is why we would like to get this query working consistently
using View.
Any help or tips would be greatly appreciated
Thanks
AuroThis is a known issue with CTXCAT indexes. Sometimes the optimizer will "drive" the query off another index, and request results from the CTXCAT index on a row-by-row basis ("does the row with rowid NNNN satisfy this CATSEARCH condition?"). That's known as a functional lookup, and is not supported by the CTXCAT indextype.
The only solution is to try to persuade the optimizer to use a different plan which does not use a functional lookup. This can be achieved by the use of hints, or sometimes by collecting or deleting statistics on the table.
Maybe you are looking for
-
Can somebody look at this site in IE and almost any other browser, and recommend some First Aid for the content pages? www.gmavt.net/~powerdog Pages should look OK in other browsers, but in IE all the hidden elements are visible and moved to the wron
-
I find it very frustrating that when I open AE and I apply effects that I have presets for, but when I go to my animation presets drop down its empty. So my fix for this is to open the Effects and Presets menu (F5 on PC) and then a window pops up and
-
I am tryng to get a report to promt for a time period. I keep getting the following error<BR><BR><BR><BR>Members in Prompt not found in Choices List: Time Periods<BR><BR>The Choices List contains the following members:<BR>Jan, Feb, Mar, Apr, May, Jun
-
Broken network alias/Weird netstat results
After working fine for months, all of a sudden I can't connect to one particular system I have on my home network (it is a network attached storage device). The problem is only from one machine (I have 2 other Macs and they work fine). I also have ot
-
Why do I get a apple id - not my own - come up onmy iPad?
I am getting an apple ID - not my own - popping up on my iPad screen all the time. Does anyone know why,and if I can stop it?