My iMac will not let me in to my iPhoto it asks me for my password but then still does not let me in

Hi,
My imac will not give me access to iphoto. It asks me for my password but then when I input that it still does not let me in. Any suggestions. I have limited computer knowledge

Back up all data.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Similar Messages

I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled. I reset my password but it still does not work. What can I do?

I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled. I reset my password but it still does not work. What can I do?

Crich,
The usual reasons for an Apple ID getting disabled are either unauthorized activity or violations of the Terms & Conditions.
Submit your request to iTunes Customer Service and if appropriate, they will re-enable it.

The Acrobat updater keeps on asking me for a password, but it does not accept my Apple ID or my Adobe password. What password do you folks want?

The Acrobat updater keeps on asking me for a password, but it does not accept my Apple ID or my Adobe password. What password do you folks want?

I'm guessing it needs a password to update your system - that is, the administrator password. Most software needs this when you install it.
This is the password you (or someone) chose when you first switched on your computer.

Why can I not download the latest version of Flash? Keeps asking me for my password but won't accept

Why can I not download the latest version of Flash? Keeps asking me for my password but won't accept even though I go through a reset process of a new passwork to ensure it is correct.

What kind of password? Can you post a screenshot of that prompt?
Also, what is your operating system & version?
What is your web browser?

Everytime i try to update my apps it comes out asking me for my password but with another email that is not mine!! I sign out just in case and when i sign in again with my real ID and try to update and still it comes out with wrong email!!!HELP!!!

Can someone help me!! I really need to update my apps! I sign in with my apple id and password but when i go to update it asks me again for my password but with an email i do not reconize!! can someone help!!

A stranger's Apple ID appears on your Mac in conjunction with an update notice -
https://discussions.apple.com/docs/DOC-5261

I have installed the new i OS 7 on my IPAD, I am having trouble with sending messages. I reset the imessage and networking as I did for the iphone but it still does not allow messages to be deleivered. any suggestions?

I have installed the new iOS 7 on my I Pad and am having trouble with messaging, I reset the imessages and networking and the messages are still not being deleivered.

Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

I have tried all the remedies for Firefox when it comes to remembering my user ID and passwords but it still does not remember them. I have the windows 7 starter system in my mini laptop. Is there a number that I can call to discuss with someone at Fire

I have tried everything that the answered questions have said and no results. I just need to talk to someone.
== This happened ==
Every time Firefox opened
== I have tried everything that the answered questions have said and no results. I just need to talk to someone. ded Firefox from the web page

I have been in the tools section and went to options and under the privacy section I have selected to remember the passwords and it does not. I also went into the security section and checked the remember the password section and it does not remember them.My exception are empty in security section also. I have read all of the replys and have yet to solve the problem.

I am trying to download adobe flash player but it is asking me for a password but i do not know it how do i reset the password?

please help with detailed instructions
thank you

the pass word is not for adobe it is for my actual profile

HT204053 After uppgrading to the latest OS the iCloud login does not accept the password. I have changed password but it still does not work

I can log in to my apple account but not to the ICloud apps even though I am using the same Apple ID.
Micke

Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
There is a difference between remembering the name and password in the Password Manager and a "remember me" check box on a web page to log you in automatically.<br />
The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and that is send to the server.<br />
If that "remember me" cookie is removed or gets corrupted or is not send to the server then the server won't remember you anymore and you need to sign in once again.
*Create a cookie 'allow' exception to keep such cookies, especially for secure websites and when cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
* http://kb.mozillazine.org/Cookies
* http://kb.mozillazine.org/Password_Manager

After a power outage my imac will not let me log in to the adminstrator, it just comes back to the log in screen

Can somebody help?
We had 3 power outages in quick succession and now my imac will not let me log in, it just comes back to the log in screen.

Hello,
What OSX version?
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!

Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

IMac will not boot up when printer is plugged in USB

After buying my new iMac (with Tiger) I successfully transfered everything from my old iMac (with Panther) and all was well.
The problem is that when my printer (Canon Pixma MP130) is plugged in on start up, the iMac will not boot up (no gears turning on the white/grey screen). When I unplug the printer from the USB and start it up, it works fine. Its not a super big deal because I can just plug the printer in when I need it. But why does it do this?
I foound on the internet someone else who had the same issues. It was suggested to him to search the printer manufacturers website for updated drivers. I did this, installed them etc..... still no luck.
I am without any mac guru's here in Yellowknife......help!
Angie

Hello there,
I hope it is OK to recycle this old thread.  I did not want to create a new one since I am experiencing the exact same issue as the original poster *flying girl* as well as other posters in the following threads:
http://discussions.apple.com/thread.jspa?messageID=4190807
http://discussions.apple.com/thread.jspa?messageID=3950255
http://discussions.apple.com/thread.jspa?messageID=4201169
http://discussions.apple.com/thread.jspa?messageID=4490899&#4490899
http://discussions.apple.com/thread.jspa?messageID=4470944
I have two Macs, a PowerBook G4 and an Intel iMac 20" (Aluminum)--please refer to my signature or profile for the specs of these machines.  Of course, I got the PowerBook before I got the iMac.  I am running the latest version of the Canon MP130 drivers, printer drivers version 4.8.3 and scanner drivers version 12.11.0, on both machines.
When I turn on my PowerBook with the Canon PIXMA MP130 multifunction turned ON and connected via USB to the PowerBook, the PowerBook boots up just fine.  I have even experimented with both a USB hub and a direct connection to the Canon MP130, and the PowerBook boots fine in both instances.
However, when I turn on my iMac with the Canon MP130 turned ON and connected via USB to the iMac, the startup tone plays, and then the iMac hangs at the blue/gray solid screen--it does not even show the Apple logo or the spokes--that is, until I turn the Canon MP130 OFF.  When I turn it off, the Apple logo appears, the spokes move, and my iMac boots up just fine.  And as long as the MP130 is OFF, I can boot the iMac fine from scratch too.
I tried starting in verbose mode (⌘V) and single-user mode (⌘S), and the gray/blue screen still appears after the startup tone plays; again, if I turn the Canon MP130 OFF, the rest of the boot sequence resumes as normal, and only then do I get to see the descriptive text for those startup modes.  But the text goes by so fast that I miss most of it--I did manage to catch something that said something like "get full config descriptor = NULL," but I am not sure if that was the exact wording.  I would need a good camcorder or even just a digital camera or another device to capture exactly what the screen says in verbose mode.  If I had those options, I would post pictures here.
I was thinking about contacting Canon, but since the issue happens on one Mac only, I figured they would tell me that it is a problem with my Mac.  So hopefully posting the information here is OK.
Another key feature is that the Canon MP130 has a built-in card reader.  I made sure that my Startup Disk preferences were set to boot from the system drive, and they still are.  And I have reset the SMC and PRAM on the iMac.
I would like to mention the following link:
http://www.ehmac.ca/anything-mac/50389-intel-imac-wont-boot-when-canon-printer-p lugged.html
If you go to page 2 on that above thread, it shows one user who allegedly physically disconnected the card reader connection from the inside of the Canon MP130 (I would NOT recommend that myself).  I just wonder if there is a more feasible resolution to this issue.
Does anyone else experience the same issue with other printers or multifunctions?  Also, why does the issue occur only on my Intel iMac 20" (aluminum), and NOT on my PowerBook G4?
Please let us know about your experience as it seems many of us are at a loss for a solution.
Thank you very much for your help; we await!  :)
Cya!
\m/ Mad Metal Mage \m/

My wireless internet is working with all of my other devices but my imac will not connect to the network?

Can anyone help? My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.

First run Software Update to make sure your iMac is up-to-date.
Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences

My imac will not start - it is hunged up, when I turn it on I see the apple and the little wheel go around and around and nothing happens - what can I do ???

Hello - can anybody help me - my Imac will not start - When I try to start it I just get to see the apple and the wheel that goes around and around HELP !!

Restart in Safe Mode, this will clear some caches. How you do this is when you hear the startup tone hold down the Shift Key until you see the progress bar appear. Let it fully boot, then open System Preferences - Startup Disk and ensure your internal HD is selected and then click Restart to test. If you still don't have luck you should run Apple Hardware Test in Extended Mode, you may need to run the test 2-3 times to report any errors. To run AHT you will need teh ORIGINAL Install Discs that shipped with the computer. Instructions for AHT are in:
http://support.apple.com/kb/HT1509
Have you been backiing up?

Suddenly my imac will not open e-mail attachments. It scans for viruses. I hit continue and nothing happens.

Suddenly my imac will not open e-mail attachments. It scans for viruses. When I hit "continue", nothing happens.

The problem most likely is the antivirus application. My recommendation would be following the developers instructions, uninstall the application. Most antivirus applications tend to create more problems than they solve. The best thing you can do for your system is to run Software Update frequently and let Apple's security handle any issues. I'd also strongly recommend you carefully read Thomas Reed's Mac Malware Guide.

My iMac will not let me in to my iPhoto it asks me for my password but then still does not let me in

Similar Messages

Maybe you are looking for