My iPad won't turn on.  It has a usb cord picture with an up arrow pointing to iTunes logo.  I can't find my device in iTunes.

I can't get my iPad to turn on.  I have done everything the internet said, other than looking device up in iTunes, because I can't find my device in iTunes.  What can I do?  It is stuck with a usb cord picture with an up arrow pointing to iTunes logo.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • 3-wk old iPad won't turn off. Has words on the screen that say "iCloud Backup, This iPad hasn't been backed up in 3 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi." The message has OK below it but won't disappear. HELP!

    Three week old iPad won't turn off.  Has words on the screen that say:
    iCloud Backup
    This iPad hasn't been backed up in 3 weeks.
    Backups happend when this iPad is plugged in,
    locked, and connected to Wi-Fi.
    OK
    When I click on the OK button nothing happens.  I have tried to turn the iPad off and restart but I can't even do that. What is happening with the iPad?
    Thanks
    Mary

    Fantastic, thanks so much.
    This also helped my problem.
    You're a gem!
    Have a great one
    Jess

  • My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

    my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My new car has a USB port and requires music in MP3 format to play. How can I convert my mountain lion Itunes 11 m4a albums to mp3?

    My new car has a USB port and requires music in MP3 format to play. How can I convert my mountain lion Itunes 11 m4a albums to mp3?

    I found this on another discussion forum it may help
    Niel
    Re: how to save music as mp3 on itunes 
    Nov 24, 2011 11:21 PM (in response to dadywak)
    Click here for information.

  • HT5654 IPad won't turn on, only has apple on screen

    I cannot turn on my IPad, it only has the apple on the screen.

    Hi Wandnetta,
    Thanks for visiting Apple Support Communities.
    If your iPad only starts up to the Apple logo, I recommend using these steps to resolve the issue:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Best Regards,
    Jeremy

  • My iPad won't turn on. Has power. Any way to troubleshoot?

    Frustrating. can you please offer any advice on how to reboot.

    Perhaps something here will help:
    http://support.apple.com/kb/TS3274
    Regards.

  • How do i hook up my wireless printer to my mac? it has no cd that came with it, i have no drive either, but i can't find any apps or figure out how to scan for it

    need help again, thank you much.

    That information should be included in the printer's documentation.
    The following Apple Support document may also be helpful: OS X Mavericks: Set up a printer

  • My ipad won't turn on.  i don't know why. i tried rebooting it but it didn't work. help.

    my ipad won't turn on. i tried rebooting it but it didn't work. i don't know what happened. can anyone explain why happen to my unit?

    When you say a reboot do you mean a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT201412 iPad won't turn without resetting and has no sound?

    IPad won't turn on without resetting, once reset it works properly but without sound. Once I turn it off it will not turn back on unless I reset it again. Any ideas? I've already used iTunes to restore it, but that didn't help.

    Try this reset ...
    Tap Settings > General > Reset > Reset All Settings
    If that doesn't help, restore the iPad  >  Tunes: Restoring iOS software

  • I updated to iOS 8.2 on iPad 2 my iPad won't turn on. What can I do?

    After I updated my iPad 2 to iOS 8.2, my iPad won't turn on, it just stays on a loop where it shows the apple logo, does the screenshot effect then darkness. I tried connecting it to iTunes to reset it but my computer can't read it. What can I do?

    Hello David,
    Thank you for contributing to the Apple Support Communities.
    It sounds like you're not able to use iMessage on your iPad. You've tried some good troubleshooting steps, and I'd recommend these additional steps:
    Turn off iMessage and FaceTime and restart
    Go to Settings > Messages and turn off iMessage.
    Go to Settings > FaceTime and turn off FaceTime.
    Restart your device.
    Turn iMessage and FaceTime back on.
    Still not activated after an hour? 
    It might take a few minutes to activate iMessage and FaceTime. If you've waited more than an hour, try these steps:
    Make sure that your device has the latest version of iOS.
    If you're using an iPhone, contact your carrier to make sure that you can receive SMS messages.
    Contact Apple Support.
    From:
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    Best Regards,
    Jeremy

  • Ipad won't turn on itunes can't connect error OxE800024

    ipad won't turn on itunes can't connect error OxE8000024

    This Apple doc has some tips that can help you fix that problem -> iOS: Unknown error containing '0xE' when connecting to a Windows PC
    If it won't turn on, you could try connecting it to another power outlet or computer.

  • I have a new ipad.  I can't get support without my serial number.  Ipad won't turn on.  I ordered it from Target so I have no receipt.  I can't get telephone help without serial number.  What to do?

    I have a new ipad.  I can't get telephone support without my serial number.  The ipad won't turn on.  I order it from Target and there is no serial number on the invoice.  How can I get telephone help without serial number?  Please help!

    The Serial Number is on the back of your iPad.

  • TS3274 my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • My ipad won't turn on. Have tried to reset by pressing the two button at the same time. It work. Why is this happening? For the first time it happened to me after using the ipad 4 running on ios 7, for almost a year and a halftime

    My ipad won't turn on. Tried to reset and it work. I'm using ipad 4 with ios 7 and this is the first time that this happened to me.what is wrong with the ipad?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • How to save the Response message from SOAP adapter

    Dear Friends,    I am sending the FIle details webserver.here sender is FILE adapter and receiver is SOAP adapter. FIle to SOAP working successfully, but I need response from SOAP. Sender QoS is BE, so the response is coming to XI, but in SXMB_MONI i

  • Rubygems - May I gem update --system?

    I did like it was told in newsletter for April 3, 2008. But now I have: [root@silverhawk ~]# pacman -Qs rubygems local/rubygems 1.0.1-1     A package management framework for the Ruby programming language [root@silverhawk ~]# gem --version 1.1.0 Will

  • BEx queries hitting aggregates

    Hi Gurus,     Is there anyway we can findout queries hitting aggregates. I mean any table where we can check which queries have ran by pulling the data from aggregates rather than cube. Thanks in advance. Gurantee of award points. Regards Baba

  • Under My Image Garden, laptop recognizes the printer can do dvd labels but the desktop does not.

    Why won't My Image Garden recognize that I can do DVD labels? All it will let me do is make calendars. Under the new menu, all the other choices are turned off. My old canon printer had no trouble. The new one is an MG5430 (in the US MG5420 or 22). T

  • URL info for Yahoo!

    Hello All! Quick question. Recently Yahoo! revised their online ad services and now it's more dependant on the listed URL information. I need to alter the URL for my "Welcome" page so that instead of reading www.CinemaShorts.com/Welcome it shows up a