My ipad won't turn on. Have tried to reset by pressing the two button at the same time. It work. Why is this happening? For the first time it happened to me after using the ipad 4 running on ios 7, for almost a year and a halftime

My ipad won't turn on. Tried to reset and it work. I'm using ipad 4 with ios 7 and this is the first time that this happened to me.what is wrong with the ipad?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • HT201412 My Ipad has frozen I have tried to reset by pressing the sleep and Home. still frozen???????????

    My Ipad has frozen I have tried to reset by pressing the sleep and Home. still frozen???????????

    Try a reset a few more times.
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)

  • TS3274 MY IPAD screen is unresponsive. I tried to reset by pressing the power button for a long a few seconds but it is not responding either.

    MY IPAD screen is unresponsive. I tried to reset by pressing the power button for a long a few seconds but it is not responding either.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • IPad won't turn off so I can reset it because my emails are locked.  I receive emails but can't access them, can't delete, can't send.

    My iPad won't turn off so I can reset it.  My emails are locked but I receive emails as the number of emails increases.  I can't access these emails, I can't delete the one email showing, and I can't send an email.  The screen is locked.

    Try a reset:
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

  • My ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??

    See Here  >  Device Not Recognised  http://support.apple.com/kb/TS1538

  • HT201270 iOS: Updating your carrier settings   why is this asking to do  first time since  my old 3gs

    iOS: Updating your carrier settings   why is this asking to do  first time since  my old 3gs  now its asking  on my  5

    Sometimes your carrier may release important updates that the phone needs to work with them, maybe something is missing, its hard to tell, try these steps.
    Make sure your device is connected to the Internet.
    Tap Settings > General > About. If an update is available, a prompt will appear.
    Let me know

  • HT1212 How do I unlock my iPad mini??I have tried to reset it through my apple computer but in vain

    How do I reset my mini iPad??

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • My iPad won't restore, I have tried on 3 different computers, always error -1

    Hi,
    It all started yesterday when I turned off the wifi and didn't find the 3g network. Then it begin to restart all by itself...When I tried to restore it gave me the -1 error )tried on 3 different laptops). During the restoration it stopped at about 70% and then gave the error

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    Message was edited by: Texas Mac Man

  • Ipod touch will not turn on, have tried to reset any other ideas?

    My ipod touch will not turn on, I have followed the apple fault finding and it will not reset either. Any other ideas?

    Try to connect in recovery mode, explained here: iPhone and iPod touch: Unable to restore

  • How may I get my Ipad 2 to power on? I have tried the two button approach and it did not work.

    My Ipad 2 will not power on. I have tried the two button approach but it did not work. Until last evening, the Ipad was working very well. After it entered the sleep mode, it would not come back on. What can I do?

    The first thing to suspect is a completely drained battery. When this happens the iPad shuts down and will not turn on. Even if you charge the iPad it may take more than 30 minutes before it responds. Plug the iPad into the charger that came with it and plug the charger into a known good wall outlet. Do not charge the iPad by connecting it to a computer. Wait 30 minutes. Then reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
    If the iPad restarts let it continue to charge until the battery is at 100%. If the iPad does not restart consider making an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • My ipad won't turn on.  i don't know why. i tried rebooting it but it didn't work. help.

    my ipad won't turn on. i tried rebooting it but it didn't work. i don't know what happened. can anyone explain why happen to my unit?

    When you say a reboot do you mean a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.

  • My iPhone keeps blinking the apple screen on and off, as though it is turning on, but it goes no further. I've tried the two-button shut down, but nothing is changing. What do I do?

    My iPhone keeps blinking the apple screen on and off, as though it is turning on, but it goes no further. I've tried the two-button shut down, but nothing is changing. What do I do?

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • HT1212 My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

    My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My IPAD2 has now a little box around everything I tap.  I have tried to reset it .It is not working the same thing occurs.  I have it plugged inTo my MAC OSX and trying to back up but i am told i need to use passcode. Well I cannot get into my IPAD now.

    My IPAD has a little box around everything I tap.  I have tried to reset the IPAD 2 but to no avail.  Now I am locked out and cannot put my passcode into the Ipad2 so I cannot back up the IPAD 2 when plugged in.  It is charged ..I was reading a Foot Smart email when this occured. Help

    Sounds like you have VoiceOver (one of the accessibility features) 'on'. Try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Accessibility Shortcut (or Triple-Click Home depending upon the iOS version).
    If that doesn't turn it off then you can either turn it off directly on the iPad (you need to use a tap-to-select and then double-tap to activate/type process and 3 fingered scrolling) to go into Settings > General > Accessibility and turn VoiceOver 'off', or you can do it by connecting to your computer's iTunes (after typing in your passcode via the tap/double-tap process) : http://support.apple.com/kb/HT4064

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

Maybe you are looking for

  • How to pass parameter to webtemplate

    hi, i have a requiremnet in this way. i have two i views in first iview i have all the states in india. when i user clicks on ka-karnataka i want to filter the analysis item showing all the districts in karnataka this analysis item is in the web temp

  • Create jar resource in Workspace for ALSB3.0

    I need to create a jar resource in an ALSB Workspace project similar to the way you can create a jar resource through the regular ALSB console(Create Resource -> Utility -> Jar). Does anyone know how to do this? Can't find anything on this in the doc

  • How do I enable php in OSX 10.9.3

    I downloaded webserver and have a apache and mysql and the site is working when i connect but only the html pages, the php pages dont work and i noticed the webserver says PHP is disbaled how do I enable the PHP?

  • How to edit working hours in the calendar rules

    Hi.. Does anybody know how to change the working hours in the calendar rule editor as in mine case those working hours are already frozen. Ritu

  • RE: (forte-users) MaxWaitDepth?

    MessagesWaiting is the number of message/transaction currently waiting for a free partition. ka -----Original Message----- From: Brenda Cumming [mailto:brenda_cummingtranscanada.com] Sent: Friday, August 11, 2000 1:36 PM To: joe.wolfesasktel.sk.ca Cc