My iPhone 3G cannot get any 3G signal.

I can't seem to get any 3G service on my iPhone, and haven't for about a week now. Please help. I know that we have 3G service in this area, because I'm holding another iPhone in my hand, and that one gets 3G service just fine. I know that 3G is enabled, because I go to Settings -> General -> Network, and "Enable 3G" is turned on, and just says "No Signal." When I turn off "Enable 3G" I can get on the Edge network just fine. I don't get it. I already tried reseting the iPhone (holding down the home sceen button and the power button), and that didn't work. I tried upgrading to OS 4.0 and that didn't work. I even tried going to Settings -> Reset -> Erase All Settings, and even that didn't work. I am completely and totally stumped, and I am out of ideas. Help!

Call AT&T and make sure your 3G data plan is in order. Sometimes, for unexpected reasons, data plans can be dropped off. You can also try opening the SIM slot, taking the SIM out, and putting it back in.

Similar Messages

  • I cannot get any phone call when my iphone is sleeping

    Hi,everyone. I cannot get any phone call when my iphone is sleeping ( or locked ). After I active my phone, it will show how many call I missed. Does anyone have the same problem with mine? I tried reset, update software, but still not working.

    to put your iPhone to sleep follow these steps:
    1) press the sleep button once - screen will go dark and you'll hear a click.
    2) press home button once - screen will light up with your wallpaper in the background, time, date, etc.
    3) DO NOTHING for five (or so) seconds and then your iPhone will sleep.
    if you receive a call, iPhone will wake automatically. otherwise to wake the iPhone, press the home button - iphone will wake. slide the unlock bar (enter pass code, if enabled) and use.
    to return to sleep mode, repeat sequence (1 through 3)
    doing this will allow calls to come through while Iphone is asleep and prolong the battery charge exponentially.

  • I cannot get any sound on my iphone unless I have headphones in any suggestiosn on how to fix this?

    I cannot get any sound on my iphone unless I have headphones in any suggestiosn on how to fix this?

    From the Community Ettiquette page found here.
    Post only technical support questions and answers, unless otherwise noted.
    Be polite, constructive and stay on topic.
    Search for questions similar to your own before submitting a new question to the community.
    Try item 3, I feel certain you'll find a solution.

  • I cannot get any of my information from my Iphone or Ipad to sync to my Icloud account. Any Suggestions?

    I cannot get any of my information from my Iphone or Ipad to sync with my Icloud account. Any suggestions?

    Well, what exactly have you done so far?
    Is iCloud activated?
    What data is marked to be synced?
    What happens on icloud.com?
    Have you installed the iCloud utility on your computer?

  • After up dating iphone3 cannot get any sound on receiving calls or messages

    After updating my iphone3 cannot get any sound on receiving calls or text does anybody no how to rectify this problam ?

    I have been having this issue as well and have been looking online for possible solutions to the issue of the iPhone not receiving phone calls or text messages.   The solution for me was solved when I turned off the LTE service, forcing the device to use the 4G network.  Apparently, my location was just far enough from the LTE tower that calls to the phone were not going through, regardless of the signal strenght showing on the device.  The LTE iPhone will always look for the closest LTE town which may be further than the closest non-LTE tower and as a a result, the signal drops.  I would suggest contacting your service provider and have them locate the closest LTE tower to your location to determine if this is the cause of your issue.

  • Why am I not getting any input signal into logic X or GarageBand from my audio interface?

    Hello all,
    I'm completely new to all this so I will try my best here to give all the details needed.
    So, I am using a Mac mini (2013 model: i7 overclocked at 2.6, 16 gbram) and a focusrite saffire pro 24DSP. Overall both are in perfect working order.
    My problem, however, is that I am seemingly unable to get any form of signal from my saffire into either Logic X or GarageBand. I am trying to record guitar lined in and I have set all the settings in logic to what I think is right (software monitoring checked, output channels selected, saffire selected for both input and output) and I have set up my saffire mix control - I spent days reading the manual and watching online tutorials.
    The saffire mix control is set up thus:
    Input 1 - instrument
    Daw 1+2 = GarageBand
    Daw 3+4 = Logic X
    Sample rate 41Khz
    Master Output = stereo monitor mix (line outs 1 &2 to my monitor speakers)
    Output 3+4 headphones
    Is there anything missing here?
    As far as this all goes, when I plug in my guitar I can get a very clear "raw" signal from the saffire mix control, but when I then go to set up a track in either DAW and assign the necessary line ins and outs, no matter what I do I cannot get an input signal, not even a partial one (I have the monitoring and record armed options checked btw). I am close to giving tearing my hair out.
    I'm sure I am just missing something out?
    Thanks in advance :-)

    I've plugged into the interface a mic and an electric guitar.
    I'm not sure what I did but the guitar is coming through (though it shows no signal on the interface). Mic input level on line, mic registers a tiny bit of sound when I hit the mic (on only one channel) but doesn't register any vocals when mic input is turned up to the max.
    Odd thing: stereo/mono button reversed that is when the button is pushed in it equals stereo on the head phones when it says it should be mono and when the button is left unpushed it equals mono when it says it should be stereo.
    Monitor is on and volume is at max.
    GB system preferences don't list Input 1 or/and 2. Where do I find them?
    I've tried everything I can think of. It feels as if I just need to find the right switch but I don't know where to look...

  • TS4062 I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

    I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

    Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
    Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
    Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
    Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
    You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
    BTW Apple doesn't offer free support for this kind of issue with iTunes.
    tt2

  • I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to easily, and when it does it can never connect?

    I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to find wifi, and when it does find a wifi network it can never connect?  You think apple would have a clue how to fix it!  Because turning the wifi on and off doesn't work, resorting network settings doesn't work, even restoring phone to factory default doesn't work...

    Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

  • I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

    DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

  • My kids have given me a second hand ipad 1st gen MC497B/A ipad  3G 64GB- GBR and I cannot get ANY apps even free ones as says I must have V6 Surely this device is not so old I can't get any apps Plea tell a novice what to do as no free Apple support!

    I am the proud owner of a first gen ipad given to me for Easter by my kids and we cannot get any apps even freebies as says I must have V6 but now idea how to upgrade my ipad! i would be very grateful for simple instructions as to how to get apps ASAP And I have no idea what operating system I have
    Many thanks a VERYNovice ipadder

    The iPad 1 can be updated to iOS 5.1.1. You can see what level you are running in Settings > General > About > Version.
    If you are not at iOS 5.1.1 and if you are have iOS 4 (or earlier) there is no Software Update in Settings. That feature was first added in iOS 5.
    To update you will have to connect your iPad to iTunes on a computer (preferably the one you sync with and backup to).
    See here: http://support.apple.com/kb/HT4972
    If you are on level 5 but not at 5.1.1 you can update to 5.1.1 using Settings > General > Software Update.
    There are still many Apps which will run on iOS 5. Also, some developers have older levels still available for the iPad 1.

  • I recently upgraded my 4s to a 5s. the verizon store took my old phone for a trade in. i cannot get any of my pictures to download from icloud. my photo stream folder only has a small percentage of the photos in it. any help would be greatly appreciated.

    i recently upgraded my 4s to a 5s. the verizon store took my old phone for a trade in. i cannot get any of my pictures to download from icloud. my photo stream folder only has a small percentage of the photos in it. any help would be greatly appreciated.

    That's possible if he didn't connect to a WiFi hotspot after taking them.  I don't think the "Personal" Photo Stream uploads over Cellular, unless they changed it since the last time I used it.
    If that's the case, then the photos likely didn't upload to Photo Stream and are stuck on the phone.
    And you're not going to be able to get them back, either.

  • Cannot get any audio on spdif coa

    Im using vista 64 with a regular xfi xtreme gamer. I installed the newest drivers but cannot get any audio to output on the FlexiJack. The digital i/o setting is greyed out on the creative console. Ive tried everything i can and cannot not get any sound. I am using the Z5500. The receiver is across the room and my only choice is to use a long coax cable i have.

    You enabled it in your windows speaker configuration under "playback devices" ?
    You probably have to set it to default by rightclicking on it and activating it and set it to default!?
    http://www.homeys-bunker.de/spdif.jpg

  • I have a bose docking station with a 30 pin connector and purchased the Ipod 5G and also have a Ipad4th Gen and have tried several connectors but cannot get any audio.  Any suggestions?

    I have a Ipod Touch 5G and a Ipad 4th Gen with a Bose sound dock with a 30 pin adapter.  I have tried several connectors but cannot get any audio on the sound dock.  Do you have any suggestions?

    Have you tried this adapter from the Apple on-line store http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c  They also have one that uses a cord to connect the dock to lightning that is $10 more.

  • I have downloaded Fiefox 7 for my laptop running Windows 7. Now i cannot get any sound from web content. ( I can still get sound using Google Chrome !!) Any ideas ?

    I downloaded Firefox 7 and now cannot get any sound when playing web content. I have reinstalled but still no joy. When I use Google Chrome for the same useage, it plays sound fine.
    Any ideas ??

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
      2. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins  
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.

  • An unknown excel file has appeared on my desktop. It cannot be deleted and I cannot get any information about it. Is this malware?  How can I get rid of it?

    An unknown excel file has appeared on my desktop. It cannot be deleted and I cannot get any information about it.
    Is this malware?  How can I get rid of it?

    Hello Jeff,
    Thanks very much for your reply.  I looked over the article you mentioned, but I have tried all of these methods, but only get the response "The item “29394D00” can’t be moved to the Trash because it can’t be deleted."  Similarly, I cannot Get Info on the file.  This is why I'm so concerned, it just appeared on my desktop, but I cannot touch it, or open it or delete it...
    If you have any more tricks up your sleeve, I'd love to hear about them...
    Derek

Maybe you are looking for

  • ITunes 8 "minimize to task bar" no longer works

    Ok, i'll keep this short and simple. On my PC running windows XP, one thing I always liked was I could minimize iTunes, and it would turn into a little controller that would live in my task/start menu bar at the bottom of the screen. Then, the other

  • HT5517 AirPlay from iPad to tv

    have iTunes loaded on my PC.  Do I need it on my iPad to use airplay to protect from iPad to tv?

  • Client Device printing.

    I am trying to get printing setup so that I can print from my Unix Application Server to a printer on my windows desktop. On my Servers I am using CUPS for print services and I can see jobs moving from the Application Server to the SGD Host which I h

  • Creating a RAC standby database for a single instance database

    Dear All, I have a task of migrating a 500GB single instance database to a two-node RAC database with a little downtime at hand. My migration strategy is to: 1) Create a RAC physical standby for the Single Instance database 2) Switchover to RAC stand

  • What is the latest version of adobe livecycle designer for mac?

    Hello Guys, I am new for Adobe LiveCycle Designer. Can some one guide me what is the latest version for Mac. Thanks in advance. Regards HARI