My iphone 4 is stuck on the apple sign, tried turning it on and off but nothing is happening
my iphone has froze on the apple sign, iv tried turning it off and then back on again but the same thing keeps happening, please help!
What do you mean it's stuck on the apple ID?
Similar Messages
-
during installation something went awol.
Ive tried resetting the iphone, computer, and itunes.
my computer is still telling me it cant restore my iphone!
help!When the computer says that it can't restore your phone does it give a specific error code?
This article lists specific error codes and their meanings as well as troubleshooting tips:
http://support.apple.com/kb/TS3694
Hope this helps. -
contacts backup to iCloud
iCloud is not backing up my contacts for the last month or so. i tried turning it on and off but to no avail. suggestions?if you can't get it to reboot then I would let it run out of power that result in a reboot if
the screen then don't comes on when you charged it again then I would say hardware defect
and repair needed -
I am trying to switch from video to camera and when I push on the photo button, it remains on video. I've tried turning it on and off, but that doesn't help. Any suggestions?
Tapping the words don't work in iOS 7. Just swipe up or down anywhere on the screen until the mode that you want to use appears in yellow type on the right side. Yellow type indicates the selected mode.
Remember - swipe up or down to get to the mode that you want to use. -
My imessage has been sketchy lately. One text it will say my iMessage has been delivered the next I have to send it as a text message. I've tried turning my phone on and off and turning iMessage on and off repeatedly. How do i fix this problem?
It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.
-
Why does the screen turn black? I was using it normally and it all of a sudden faded to black and hasnt come back on since yesterday. You can see the back light but no image on the screen. Ive plugged it in and it vibrates that its connected but still the screen stays black. I left it alone while I slept and tried again in the morning but still nothing.
So weird mine is doing the same thing. I didnt drop it or anything. I was texting and it suddenly went white and then turned black. It says its plugged into itunes but the screen comntinues to stay black.
-
Ok so, I own an iPad 1. I was using it and you know playing games and all. All of a sudden, the screen went black/grayish. I payed a lot of money for it, this is the second one I had to buy because the first one I owned broke. Could some water have gone in it? Please, help me. I can't buy another one. Please, reply ASAP.
Might be hardware failure. Take the iPhone to the nearest Apple store
for evaluation. Make a Genius Bar appointment to avoid delay at the store.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/ -
I tried updating my ipod touch to iOS6 then an unknown error occured so i disconnected it an now it is stuck on the apple sign and has a loading sign and has been like this for 2 hours. what can i do?
My home button is also unresponsive and i have to press it really hard to make it work.Do you remember the the exact wording of the error message:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
my iphone froze so i turned it off and back on again and it has been stuck on the apple sign since 9pm lastnight how do i get it to work again?
What version of OS X are you running? If your MBP came with an installation disc, try booting from it and using Disk Utility to verify and, if needed, repair your hard drive. If you're running Lion or Mountain Lion and your computer didn't come with an installation disk, try holding down the Command and R keys whilst booting and try Disk Utility.
Clinton -
I upgraded to the io6. I'm stuck in the apple sign-in screen. It keeps timing out. I've been stuck for hours. Help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
or maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My iphone is stuck on the apple boot logo screen. What do i do and i already tried to restore but it comes with an error
Try this
http://support.apple.com/kb/TS3125 -
I "Erased all content and settings" and now my iTunes does not recognize my iPhone when I plug it in. Plus my iPhone is stuck with the apple symbol on it and wont do anything. what did I do? How do I get my phone to work again?
Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually takes about 10 seconds time. If still problem. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.
-
My iPhone is stuck on the Apple Logo and when I try to restore I get an unkown error (14) I dont know where to go from here there doesnt seem to be any other discussions like this
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware. -
During the last week my Iphone has been switching off/on on its own and now my Iphone got stuck at the apple logo.What should I do?A month ago it also happened but then everything got back to normal.A person told me to change th display...what should i do?please help!
Hey adinat,
Welcome to Apple Support Communities! I would go through the steps in the iPhone troubleshooting assistant and see if that resolves the issue you're experiencing on your iPhone 5:
Frozen or unresponsive iPhone
http://www.apple.com/support/iphone/assistant/phone/
Regards,
David -
IPhone 3G stuck at the Apple logo screen; will not boot!, continued
This thread is a continuation of
[iPhone 3G stuck at the Apple logo screen; will not boot!|http://discussions.apple.com/thread.jspa?threadID=1600894],
which has been locked.
The thread was too long and some browsers were timing out.
The above link goes back to the original thread.
Thank you.
Apple Discussions HostsAdd me to the list of people furious with Apple about this problem...
...I have just got back from a 2 week holiday in Spain, and on day 3 of the holiday my iPhone rebooted itself and stuck at the Apple logo.
What's more annoying, I'd purchased a data abroad plan from o2 for £50 and hardly used it because I couldn't use my iPhone because it was stuck on the **** Apple logo. o2 will not refund the plan I purchased because I had started to use it (about 2.3MB to be precise).
Good job my girlfriend had her trusty Sony Ericsson phone because at least it WORKS as a phone, unlike this **** iPhone 3G which only has one use - as an expensive paperweight.
Come on Apple, at least admit there is a problem and show your loyal customers that you are actually aware there is a serious problem that is causing your iPhones to become utterly useless.
I'm seriously thinking of gettting rid of this iPhone and getting a cheap no frills phone - at least I can use it to make calls.
Maybe you are looking for
-
I am trying airplay one thing from my computer to my apple tv, but at the same time work on something else on my actual computer screen. Such as airplay a movie to the apple tv but use my computer to work on something else. Is this possible/will this
-
I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?
-
Viewing Persian Characters in Oracle Form Server 9i / 6i
I have problem with 4 Persian characters ( � "GEH" , � "PEH" , � "JHEH" , � "CHEH" ) in pre compiled or new compiled forms on JAVA applets. Is there any parameter to set a default or static font family for these pages? I've tried to use Tahoma font w
-
Uninstalling, then re-installing the CS6 beta trial on the same Mac
My inquiry is really simple: Can anybody authoritatively confirm that it is possible to uninstall the CS6 beta trial, then re-install it on the same Mac and it will continue to work as when you first installed it, before the uninstall. That's all. F
-
Manually configure WCS as an SNMP Trap Receiver?
If I discover a WLC through the WCS, do I still need to manually configure the WCS as an SNMP trap receiver on the WLC?