My iphone 4s is having some audio issues.

I just recently bought the RadioLab mobile app and the first few times I used it it worked great. Then, one time I plugged in my head phones and started a downloaded story. It played just fine, but as soon as the backlight dimmed the audio stopped. When I unlock the phone it comes right back on and the story starts where it left off.
It does the same thing when no head phones are connected also.
Is there some kind of setting that tells the RadioLab app to shut up when the phone locks? Audio in itunes and Pandora Radio on the phone does not cut off when the phone locks. any help would be great.

Your only option is to return to Qatar or send the phone to someone that's living there and have them bring the phone in for service.
~Lyssa

Similar Messages

  • I'm having some Audio Issues involving my headphone jack (air and pro)?

    Ok, so, this is pretty weird.
    I have had two macbooks thus far (a 2011 macbook pro and a mid 2013 macbook air)
    I replaced my pro in 2013 due to a separate issue.
    Anyway, I have been consistently having an issue where any type of headphones I put into my computer eventually begin to lose sound in the left earphone - but still work fine on other devices.
    I.e, I'll get a new set of headphones, use them for a week, and a week later, no sound will come from the left port - but only when using my air. It is most definitely not the headphones.
    It's not the output balance - when I set the balance all the way to the left, no sound comes out, and the problem continually reoccurs with every new set of headphones I get - on TWO different computers.
    The same issue happened on my pro, and happens in my air.
    Am I like, inserting the headphone jack in "too roughly" or something? What's going on?

    some headphone jacks arent the exact right length and the contacts miss
    1. diff headphones and same
    2. diff. audio , from Itunes, online etc, and still same
    3. youve checked balances.
    4. RESET NVRAM
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    5. If same contact Apple for appt for in shop diagnostics, hardware fault

  • I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet.  Do I have any options?  Thanks!

    Friends,
    I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine.  I'm thinking that a routine OS upgrade might help.  However, this machine is not connected to the internet.  Are there any alternate methods for upgrading system software?  Thanks in advance!

    OK, what you should do is download the updates on another machine and burn them to a disc.  Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates.  Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install.  Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
    My suggestion is this: if it looks like you might need a download, get it onto that disc.

  • I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

    I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

    Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
    http://www.digitalrebellion.com
    Try deleting your render files and re-rendering the project.
    Start with these and let us know how you go.
    Tony

  • Having Some Mail issues on Apple Mail 5.2

    Hi All - Having some mail issues lately with my gmail account Imap set up.
    I can receive mail but when trying to send mail it pops up with the follwoing:
    "Can not send message using the server smtp.gmail.com"
    I tried deleting the gmail account on my iMac and setting it up again.  in the set up  It gives me two choices as an outgoing server:
    smtp.gmail.com and just Gmail.   If I choose Gmail I can send the messages, but is this secure?  I've always used smtp.gmail.com for outgoing without any problems.
    Any help or guidance would be greatly appreciated.
    Thanks
    Mark

    Thanks for responding BGreg - Yes everything looks OK under the advanced tab (see below)  I never had any
    "Red Dots" in connection doctor on the old smtp.gmail.com but it wouldn't work.  The new outgoing server - labeled merely Gmail works and appears to be the same as smtp.gmail.com, but I've never seen this in the past - it's always been called smtp.gmail.com   I wonder if Google changed the name?

  • Having some Captivate issues...

    I have having a couple issues that were not fixed with the
    1.01 update.
    1) After I publish a movie, Captivate will sometimes close,
    without saving anything at all. The movie is fully published,
    however the software basically crashes after it has been published.
    (This doesn't happen everytime, but maybe once out of ever 10
    movies)
    2) When the software is started, the loading screen does not
    always display, I sometimes have to minimize all windows, and then
    click on the loading screen in order for Captivate to have its own
    tab on the taskbar. The loading image will appear when I minimize
    all windows, and when I click on the loading image, it will then
    create the Macromedia Captivate tab that appears on the taskbar.
    3) Captivate cannot handle multiple movies open at the same
    time. I noticed that when I publish with more than one Captivate
    movie open, the software crashes. By crash, I mean the program
    closes the entire movie without saving any changes at all.
    I'm running a fully updated XP w/ SP2. I've disabled all
    startup processes that are not needed, as well as tried with Norton
    turned off- it still didn't work.

    quote:
    For the issue listed as #1, have you tried changing the
    output location to a folder very near the root of the C drive? I've
    seen issues reported where the path was longer than Captivate
    likes, and this can cause issues.
    - I tried C:\Demos, and have had it continue to happen. I
    normally do not put the finished product in that location, but I do
    remember it failing twice when it was at C:\Demos
    quote:
    I have several programs that behave the same way such as
    Firefly, Oracle, and a few others in which I launch the app but it
    does not display in the taskbar until the application gets past the
    splash screen.
    - That's different. I said I have to click on the main logo
    in order for the Captivate taskbar icon to appear, I really hope
    that wasn't the intention of the developers.
    quote:
    As for issue listed as #3, I'm assuming you are referring to
    having multiple instances of Captivate running simultaneously? I'm
    assuming this as Captivate is a single project application. You can
    only work on one project at a time. I also know that Captivate does
    seem to be resource hungry. I'm not sure I've ever tried (nor had
    the need) to open more than two different instances simultaneously.
    So how many are you opening? Surely not 100!
    - Your assumption is correct. That's a shame that the
    developers left out a notice that didn't allow you to open multiple
    instances. Hopefully we'll either get a notice when we try it in
    the future, or get support for multiple movies open at the same
    time, in future Captivate releases.
    I've done about 3 before Captivate starts to act funny. It
    has enough trouble with 2. I think I got up to 8 before Captivate
    crashed.
    I'm really looking forward to the new version of Captivate,
    is there an area to address feature requests/suggestions/bug fixes
    for the next release?

  • Having some serious issues with my iPhone and need some advice

    I'm going to these two issues which have been occuring with me for the past weeks-
    1.) I am facing a problem with my iPhone 5's lightning port or the cable. This started happening all of a sudden; one second my phone is charging, and the other it is not. Even if it is slightly moved from its position, it would stop charging, and further shaking starts it again, so on and so forth. At first I thought the issue might be with my cable, so I asked my friend to bring his lightning cable to my house so we could test that. It happened again- one shake the phone will charge, another shake stops it. (Note that any kind of movement does this, not only shaking) I'm a bit skeptical about his (my friend's) cable too, though- it shows NOT CHARGING on his iPad while it is in fact actually charging. His cable is only 3-4 weeks old though, so this confuses me even more. I think the issue might be with my port, but as of now I cannot draw a valid conclusion to my problem.
    2.) The second problem is that I've noticed my battery drains a **** lot faster now- ever since the first issue started. I manage to get my phone charging by placing it very carefully on the table and it charges overnight. However, when I pick it up in the morning, and read some news, it drains from 100% to 99% in ~60 seconds. This never happened before. Before this, it used to be at 100% for at least 10-15 minutes (might be even more). If I reboot my phone, it shows 100% again, but it still drains a lot faster now. I know because I've been using this phone for the past 4 months now, and I know when it drains and when it does nots
    Please, help! I need some advice as to how I should approach this problem. My phone is in the warranty period, however, I would like to have an expert's opinion first.

    Hello,
    First: I've experienced the same problem with my iPhone 5. I've bought a new charger and it still did the same thing. I went to the Apple Store to get my iPhone checked out and they said that the pins inside my iPhone we're damaged, and I had to get a replacement.
    ~ Josh

  • Having some weird issues with logic 8

    i am almost Positive! that i pushed some buttons or selected something to mess it up, i would be indebted to anyone who can help me with like three issues i'm having
    I run my M-audio mobile pre into logic and am having these issues:
    #1. track 1 and two seem to be tied together even though i select mono tracks... so i need to leave track two blank otherwise it interferes with whatever is on track one. and on the bar where i drag the loop i was using it has two O's that make like a vinn diagram symbol.
    #2. the volume controll (the bottom left fader one) can increase the Db but not decrease...
    #3 through my headphones the signal only comes out the right side. i am inputting my guitar/vox into the right input on the mobile pre, but i thought if the tracks were mono, it wouldn't matter.
    please please please help, i need to get recording soon!
    thanks.

    i figured out the volume issue, with the weird stereo track, i needed to adjust it on both tracks (even though one was empty haha duh)

  • Hi! So I am using a MacBook Pro with Retina Display, and I am having some trouble issues with sharing documents on Google.

    I am part of a 2 person group, who's entering a documentary for the NHD competiton. If you don't know what that is here's a link: http://www.nhd.org. Anyway, that doesn't really matter. What does matter, is that my partner and I, we're using Final Cut Pro X to make the documentary. I downloaded the Final Cut Pro X trial on my MacBook Pro so I could work on our documentary at home. My partner Cecilia, wanted to work on it as well, but using Windows Media Player or something like that. My family uses a lot more Apple than windows. So I come home, work a little on our documentary, go under file ---> share ------> masterfile---> settings-----> Video Codec -----> H.264. A couple seconds/ miniutes (it didn't take very long) later, I see our documentary as a Quick Time file pop up under my documents. I then log into gmail. i click compose, type in my partners e-mail, and then click the little paper clip to attach my new quick time file. Considering that it's 11 minutes long and is filled with media and audio, It's no suprise when I see that it exceeds the limit of ...gigabytes i think. So i send it to her using google drive. However, a couple minutes later, my partner says that she can see the file, but can't seem to download it. I double-check and make sure that I, as the owner, allowed her to edit the file. Then I check to see if i accidently clicked: "Prevent viewer from downloading" which I hadn't. Then i, myself, click on the file and click download and it works fine for me, but apparently doesn't work at all for her windows computer. This means that there's somethig wrong with her computer, or I did something wrong while sharing the file. Any ideas as to why the whole downloading process worked on my Apple Laptop and not her Windows Computer?

    These links might provide some information that may be of help.
    http://support.apple.com/kb/TA20831
    https://discussions.apple.com/message/2035035?messageID=2035035
    I've encountered this error myself upon occasion.  If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

  • Is there another bug fix coming soon. IpadAir, iPod and iPhone are still having many, many issues even with the last update. IOS8 has been a disaste! 

    Many features are still having issues, including basic iPad, iPod and iPhone functions that used to be rock solid. When can we expect the next SW releases?

    The Real Big Mac wrote:
    Many features are still having issues, including basic iPad, iPod and iPhone functions that used to be rock solid. When can we expect the next SW releases?
    What troubleshooting steps have you taken?

  • Having some major issues with track numbers in the newest iTunes

    I just recently went out and bought some new albums today for my birthday which was over the weekend and I ripped them to my computer, but when I go to put them into iTunes their track numbers are wrong. So as normal I went to change them, but found that when I click in the track number box I cannot input any numbers what so ever. I went and checked to see if the file was a read only file and it wasn't and I don't have any restrictions on this laptop so I'm not sure of what to do. Before I updated to 10.6.1 I was able to change anything and everything in the get info tab now I can only change the track name, album name, and artist. Any ideas?

    If you can click in the track number box, but get no numbers to appear, then I'd suspect you've got shift lock or num lock in the wrong position. If the box is greyed out, or you can enter new details but they are not saved, then I'd be looking for a permissions issue.
    tt2

  • Hi, I'm Caleb, having some import issues

    I've recently had a decision on whether i want to import the explicit version or just a normal version, and of course I've chosen the wrong one by accident and i cannot find a way to get the option back from importing the music from my CD.. I chose the explicit version from the CD and i only wanted the normal version, I've tried re-inserting the disc but it just imported the same live version which i did not want.

    Ok, I'll leave keep connected to the test socket then, current router stats are as follows
    DSL Line (Wire Pair):
    Line 1 (inner pair)
    Protocol:
    G.DMT
    Downstream Rate:
    1184 kbps
    Upstream Rate:
    448 kbps
    Channel:
    Interleaved
    Current Noise Margin:
    24.0 dB (Downstream), 24.0 dB (Upstream)
    Current Attenuation:
    21.1 dB (Downstream), 12.0 dB (Upstream)
    Current Output Power:
    17.2 dB (Downstream), 11.9 dB (Upstream)
    DSLAM Vendor Information:
    Country: {F} Vendor: {ALCB} Specific: {0}
    PVC Info:
    0/38
    Speedtester is reporting
     Download speedachieved during the test was - 355 Kbps
     For your connection, the acceptable range of speeds is 50-500 Kbps.
     Additional Information:
     Your DSL Connection Rate :1184 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 500 Kbps
    Kitz reports that my IP profile should be at 1 mbps (http://www.kitz.co.uk/adsl/IPprofile.htm) but I was syncing at about 600 kbps earlier today before I accidently reset my router (pulled a wire I didn't mean to pull. ) After the reset my sync jumped to the current 1184 so it's probably still readjusting, noise started at 9 dB but rose to about 20, before rising to 24 later tonight. I'm pretty sure my house doesn't have any internal wiring issues, but I suppose it's better safe than sorry. Regarding why my noise margin is currently so high, I don't know for sure but when I was first having issues I'm pretty sure I remember my IP profile being stuck at 135 kbps while I was syncing at about 1 mbps, I don't know if this could have contributed. My IP profile seems to be behaving fine now, though.
    Anyway, thanks once again,
    carrotworks

  • Been having some stability issues particularly with software...

    (as opposed to the OS), but i notice that numerous applications crash on their own. I'm thinkging i may need to dump my plist files for all of my apps...but wanted to see if there was anything else i should try first...since resetting all thos preferences will be somewhat of an inconvenience....and very time consuming...
    any help?

    um ok...well yeah it's numerous applications...and sometimes the specific app will freeze for a moment before crashing with the whole "close, reopen, and whatever" pane opens up....others, no freezing at all, just the pane pops up. I AM typically using the programs that are crashing, though not necessarily doing anything heavy or complicated, just a normal function of whatever app...
    More recently I've had a couple of stranger issues like with Mail, when the pane is minimized or hidden, and I click on the alias i have on my dock, a new Finder window would open up for a while...that happened everytime i clicked it a couple of days ago....I tried force quitting (regular quit wouldn't work) several times, and at some point after several repeated tries, it went back to normal....
    With Safari, though I DID have an inordinate number of Tabs open, more than would fit on the width of the pane, when I would click on one tab to make it active, the tab that was two tabs over to the left would be the one to activate instead...so that was weird ...
    but mostly it's the full on cashing of apps where i get the option to close or report or reopen (i believe those are the 3 things)
    i have 2gb ram..the max for my desktop. My HD is 120 GB, and I have been loading it up quite abit, running out of space more than a few times, though there doesn't seem to be an specific correlation to the timing of the crashing apps as they don't seem to happen when i get the disk space low warning....so i dunno if that could be part of it?
    not using classic....

  • Some Audio Issues with Imovie 09

    hey guys,
    when i make my videos with imovie, i mute the sound of the video clip and synchronize the video to music. I dont want the audio from the actual clip to play.
    When i export the video (i select the 'export using quicktime') and watch it in quicktime, there are random bits of audio from the clips (sometimes not even the same clip). It is rather annoying because it really takes away from the intensity of the video.
    I checked through the video, and all the clips that have sound (when watching in quicktime) are indeed muted. when i play the video in IMOVIE there is no random sound but when i play the video in QUICKTIME (the exported video) there are random bits of sound.
    Anyone know how to eliminate this?
    thanks
    -ryan
    Message was edited by: {WALLACE}

    I really don't know, but I suspect it is tricky to eliminate frames or double frames and keep the sound synched. When you stick to a preset, you are eliminating or doubling an integer number of frames. When you do a number like 39%, you have to approximate to achieve that percentage while still being constrained to full frames.. This leads to problems with the synch.
    In Final Cut Pro, you could do this with great flexibility, but it requires a great deal of effort to learn how to use all that flexibility. In iMovie, they provided some sophisticated features, but made the controls pretty vanilla, so they work for the average user. I think in this case, they imply a greater level of flexibility (through the speed slider) than they can deliver.
    Just my opinion. Maybe someone knows the real reason.

  • HT204387 Is it possible to bluetooth from the new iPad to my Blackberry torch, as i'v been having some pairing issues.

    Hi, I was wondering if it's possible for me to bluetooth pictures/music to my new iPad as i'v been having pairing issues.

    No.  iOS devices do not support Bluetooth file transfers.

Maybe you are looking for