My iphone 5 is working very slow hanges constantly and battery drains very fast

MY iphone is working very slow as well it hangs and also drains a lot of battery..plz suggest me a solution

No, it is impossible to overcharge the battery. The battery charger circuit is actually in the phone, not in the so-called "charger" which is actually just a power source. The charger circuit stops charging once the battery reaches 100%, so you could leave the power source connected for a year and it would not overcharge the battery.
The battery life will decrease over time, according to Apple, reaching about 50% of its original capacity after about 400 full charge cycles (a full charge cycle is 0-100%; so if you charge it twice from 50% to 100% that counts as 1 charge cycle).

Similar Messages

  • My iPhone 5s button home is not work and battery draining very fast

    is buy new iphone about 1 month in true shop in thailand
    1.is use about 15 days have a problem battery draining very fast *    16/5/2014
    i go to shop true but shop tell is not problem
    2.bluetooth is not compair with my car
    but in the first time i can connect bluetooth. But 1. shop true restore my device after then i can not connect this
    3.the button home i cannot used    25/5/2014
    i go to true shop again
    - tell to me this shop not receive becasue the phone have scratch and i want to change i pay 9800 bath about 326 us dollar
    BUT  i seach information scratch about 4mm. right
    *1 min 1 per*
    i hope apple help customer i buy product apple a lot of because i thust your brand but this case im not sure
    plese reply is mail as soon as im wait your answer....

    12 hours i don't have a answer.... this time my phone not used

  • IPhone 5 Continued Problems - Unable to Sync and Battery Drain

    It seems that my iPhone 5 went to crap after the last iOS 6.1.2 update.
    Battery life took a turn for the worse. No consistency in usage and standby time and battery drain.
    But now, for some reason and I don't know if it's iTunes, I have been unable to sync and back-up for two weeks now. After going through all the syncing steps, all 7, it kicks back and error message: "iTunes could not back up the iPhone "My Name" because an error occurred."
    No error code. Nothing.
    Any ideas what I can do to fix it?

    I got a new iPhone 5 about 3 weeks ago. I notice that from time to time in my pocket it heats up high enough I can feel it trough the material, but not as to burn.  I read in a post in this fuorum that this hapened for some iPhones after they updated to the new IOS either when is recharging or some blame it on heavy gaming. Mine was not recharging and no game apps open, just the usual iTunes, Messages and phone as usual when I carry it. It happens about every other day, I can feel it through my pocket and soeme times when I am holding it it is quite hot. After a couple of minutes it seem to cool off again. it just does not seem right. (Im posteing in different discussion to see where I get an answer before taking it to the geniuses )
    PS: Dave049 I'll try your suggestion and try re-adjusting the SIM card . if it works I let you all know. thaks for the idea

  • SIII constantly searching for WiFi and battery draining extremely fast

    Hi! So within the last week I notice my phone has been dying at an alarming rate (instead of going almost 16 hours without having to charge it I now have to charge it within 4 or 5 hours). Mind you my S3 is only 5-6 months old.  I have noticed within the past day that while at home my phone is constantly connecting to my WiFi. Also for most of yesterday my screen would not turn off and into power save mode after answering a text, phone call etc. (I would have to click the side to lock it and turn off the screen).  I ran a virus scan, which came back as clean.  After spending most of yesterday researching this problem online I have turned off the power save mode, which does not seem to have helped.I have also turned WiFi off.  Most responses on other tech sites apply to Sprint and AT&T who have different screen than Verizon. I have seen to enter into some hidden screen to enter this*#0011# but I am not sure if it's legit or not.  I have two apps on my phone outside of what is factory loaded from Verizon.  I do not want to keep my WiFi off all the time but I am desperate! Any suggestions? I have seen previous posts in which someone from Verizon just copies and pastes the same answer and Verizon please do not do that now!

        Hi DaniDee126, 
    The alarms have been heard and I am here to offer my personalized support! Did this seem to start after installing a new application or updating an existing one? When checking the stats in Menu>Settings>Battery, what are some of the top processes using the battery? Are you streaming music or videos more frequently? Have you adjusted your brightness settings to conserve battery life as well? I am more than happy to offer my help to increase the enjoyment of using such an awesome device!
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Updated iPhone 4s iOS 6.1 App Store and iTunes is very slow sometimes does not open, what to do?

    Updated iPhone 4s ios 6.1 App Store and iTunes is very slow sometimes does not open what to do?

    My App Store won't even open all the way and says request failed or something along those lines.

  • My iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?

    my iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?
    i try to downgrade to 6.1.3 but its not possible

    http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
    Downgrading isn't supported by Apple, sorry.

  • Firefox works very slow on startup and going to webpages. Why?

    When I had firefox before it worked very fast. It was great. Since I installed Windows 7 it has started working very slow on startup and when going to webpages. In fact I always have to wait for it to move. Very poor results. What is the problem?
    Also, don't ask me about Firefox 4; this is a real piece of crap. I tried it and deleted it. I am back to using 3.

    When I had firefox before it worked very fast. It was great. Since I installed Windows 7 it has started working very slow on startup and when going to webpages. In fact I always have to wait for it to move. Very poor results. What is the problem?
    Also, don't ask me about Firefox 4; this is a real piece of crap. I tried it and deleted it. I am back to using 3.

  • IPhone 5 battery drains very quickly

    I've had an iPhone 5 for about a year and a half and it all of a sudden started draining really quickly.  Without using it outside of a few texts, it is at 50% by noon.  With use, it easily completely drained by then.  Also, I have noticed a few odd things regarding charging my phone: I receive  a "this accessory is not meant for this device and may not charge" error and when plugged into my car charger, it alternates between charging and not charging rapidly, just making the battery drain even faster.  I replaced the car charger, and no longer have this problem, but recently had the same problem when trying a new external portable charging source.  I've stopped using the particular cord that gave me the error, and think this has solved the problem.  Just mentioning both these issues as I've never had problems with them before.
    Here are the things I've tried to fix the problem:
    Tested battery at Apple.  First time was deemed okay, the next week they said it was borderline failing (80%). 
    Replaced the battery by buying a battery online ($25, and relatively well rated).  Continued to see problems.
    Updated settings (remove location services, switch off bluetooth and wifi, turn off push for all email accounts, you name it I've tried it).  Although I tried these things, I did have a phone with all these settings turned on for a year and a half and still had a battery that would last me through the day, so I don't think settings alone are the problem.
    Restored phone to factory settings (not to previous iphone back up).  This was to address any software bugs that could be causing the problem.
    Replaced battery with a second battery bought online (bought the highest rated battery I could find). 
    Took phone into iPhone repair store.  They looked at the inside of the phone and said it looked good.  Replaced battery again. 
    After all of this, my battery still drains super quickly.  I do not think it the battery since I've replaced it three times and don't think it is the software since I did a restore to factory settings. 
    Does anyone have any idea what it could be?  I've tried everything I could think of and need to squeeze another 5 months out of this phone until I'm eligible for the upgrade.  Right now I have an external battery pack, but this is a bit of a pain to charge and carry around. 
    A friend of a friend has had some similar issues and they said they had the lightning connector replaced, and it solved the problem.  Anyone have any experience with this?
    Any advice or help would be greatly appreciated.  Thanks!

    I have been round and round with Apple "geniuses" trying to resolve battery drainage issues. I have turned off all kinds of background programs, reset the phone and even did a full restore. Nothing worked. The end result was an Apple senior technician just giving up and telling me that the battery life I'm getting is "good." I don't see how that's the case since I used to go to work, use my phone and come home with battery power still in the 70s or 60s if I was really active. Now with most everything turned off, I come home with battery power in the 30s and sometimes even the 20s, just barely hanging on to operational status. I now have to carry my charger around with me and charge this hunk of junk every opportunity I get. The diagnostic on the battery shows it to be fine which is not surprising considering I take very good care of my phone. I had no issues until installing that battery sucking virus known as iOS 8.1. I am so utterly disappointed with Apple that I will never buy any of their junk products again. I am especially angry at being told that the life I'm getting is somehow "good." I imagine that no one actually tested iOS 8.1 before rolling it out. They finished the last line of code and immediately issued it to the public. My interactions with Apple Support confirm that they only care about people who have purchased their latest product. Have an iPhone 5? Too bad! You need to get the iPhone 6 to continue enjoying your Apple experience. Screw their overpriced crap.

  • PS CC 2014 very slow to load and operate after 2014.2 update

    I updated my Photoshop CC 2014 64bit today.  It was working perfectly up to the update.  Since the update, PSCC 2014 has been very, very slow to load and slow in use.  I have uninstalled PS used the PS Cleaner and reinstalled through CC Desktop.  The speed problem remains.  Interestingly, 3D is the Menu feature that seems to take the longest to load.  In other words, the program eventually loads, but 3D appears 6 or 7 seconds later.  I don't know if this is significant.  The setup was working fine up to the update.
    Grateful for any ideas about what may be the problem and what I can do about it.
    My system is a 3770K, with 32Gb ram, x4 SSDs one dedicated to OS and programs and the others to data, and an Asus GTX660 (2Gb) graphics card.  I am using the latest driver from the Nvidia site.  OS is Windows 7 64bit.
    I am getting no error messages - just great sluggishness.
    Thanks.

    Sorry for the delay in responding.  I had to get some sleep.
    Changing "sniffer" made no difference I'm afraid.  I have put it back to "sniffer.exe" having tried reopening with "~sniffer" twice with no success.
    Resources.  The maximum cpu resource used during the period from clicking the desktop icon to the menus in the program becoming usable is 23%.
    At the end of the splash screen when "initializing panels" is briefly on the splash screen, the line for the resource meter for the cpu went red and said "not responding" - the red disappeared once the workspace was active:
    Do you need anything more?

  • CS4 File info dialog very slow to open and respond.

    CS4 File info dialog very slow to open and respond. Every click or or key stroke takes more than 1 second to record. I have try multiple changes in the performance preferences and nothing has an affect. This is the only dialog box in the program that has the problem. The problem started when I uninstalled and reinstalled because of problems with the program freezing. I have changed every setting in the preferences performance section back and forth including 3 different amounts of memory usage (lo hi and recommended) restarting PS every time and nothing works. I would appreciate any help, keeping in mind that there have been no changes to the PC and it worked fine for a long time (approx 1/12 years) previous to the reinstall. Lenovo H420 windows 7 64bit 8gb ram 1gb HDD

    I've been having the same problem now for a few weeks and its killing me. Not sure what I can do, but in Photoshop and Bridge, the only programmes I use on a daily basis, it takes me forever to enter file information.
    My specs are:
    eMachines ET-XXXX
    Windows 7 Home Premium
    4GB RAM
    500GB HDD

  • MacBook suddenly very slow to start and operate

    Sudenly last week my MacBook becomes very SLOW to start and to operate. Until last week it was working fine.
    I do not believe to have perform anything abnormal and what is new is just the normal updating of the Softwares that is performed automaticlly every week.
    I tried to shut down and restart several time.
    I tried several time to reinstall Mac OS 10.6.8
    I checked the hard disk with Disk utility and it results OK.
    What to do ?
    Thanks
    Marc

    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
    Why Is My Mac Running So Slow? [MacRx] | Cult of Mac

  • Update my iphone and now the battery drains very quickly

    update my iphone and now the battery drains very quickly

    my battery started draining after 4 or 5 hours on iPhone 4 8GB with little or no use. It was suggested in some of the threads I consulted that it might be related to a server malfunction on an email account, and to delete the account, hard boot the phone, and re-install the account, Sure enough, this worked for me. Charged at 100% at 11pm and got up next morning at 6am at 100% ( turned the email push notifications to OFF as well ) The previous 2 days I would get up and there would be less 10% battery life. A few days before this problem started my email provider had a server issue with Outlook, I couldnt get emails to and from that account to load on my iphone, so I suspect that this was the problem; iphone and or email provider was still trying to get those emails and this was causing the drain.

  • Very Slow Internet Connection and Backups

    I have had a Time Capsule for some time now (1st generation) and it has caused nothing but headaches. I have put up with it for some time but I have a very slow internet connection and cannot leave Time Machine on or it bogs down my machine, so I only backup periodically. Specifics are provided below.
    I have a poor internet connection to begin with. When plugged in directly either to my modem or through Ethernet to the Time Capsule, I get download speeds of ~ 2.9 Mbits/sec download, 0.7 Mbits/sec upload. When connected over wireless, the speeds drop to about 0.6 Mbits/sec download, 0.6 Mbits/sec upload. I feel like I am working on dial-up. I have both a Mac and a PC, and speeds are the same on both, so it does not appear to be a computer issue. I have played with various settings in the Airport, including how connected (b-n or n only), DHCP settings, etc, but nothing makes a difference. Any suggestions?

    Welcome to the discussion area, bigbrianb!
    Have you downloaded a utility like iStumbler to get a look at the signal strength and noise on your wireless network?
    iStumbler will display most of the other wireless networks around you, so you'll have an idea of the competition for unused channels. Ideally, you want your network to be on a channel that is at least 4-5 channels away from any other network to minimize the chances of wireless interference. Is that the case there?
    Your signal strength should be 50% or greater and noise less than 10% for a good quality connection on your network. Is that the case there?
    There are more things to test, but this will get things going.

  • Firefox browser very slow signing in and moving from one website to another

    firefox browser very slow signing in and opening different websites.
    == Operating system ==
    Windows xp

    Hello BJ.
    This kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
    #run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
    #update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
    #disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
    #enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
    #you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
    Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
    #try reinstally Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
    #do a virus/malware check on your computer. If this doesn't fix it, proceed;
    #disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
    #check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
    #check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
    #clean up your OS registry, using appropriate software. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly.

  • Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

    Hey there Logic Pro21,
    It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Verify that your computer meets the system requirements for Logic Pro X
    See Logic Pro X Technical Specifications.
    Test using the computer's built-in audio hardware
    If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
    Start Logic with a different project template
    Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
    Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    Isolate an issue by using another user account
    For more information see Isolating an issue by using another user account.
    Reinstall Logic Pro X
    Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
    In the Finder, choose Applications from the Go menu.
    Locate the Logic Pro X application and drag it to the trash.
    Open the Mac App Store
    Click the Purchases button in the Mac App Store toolbar.
    Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
    Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
    Click Install to download and install Logic Pro X.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

Maybe you are looking for

  • CL_BCS Mail not send for CC

    Hello Experts, I am sending the notification email in CRM using cl_bcs class and this mail should be send to "TO" and "CC" of this i am using add_recipient method of cl_bcs. *     Add  TO recipient with its respective attributes to send request l_rec

  • How to save an existing file into a new file using "save as" method?

    Hai to all, if i'm having a file named as "tab.doc"... i want to save it as another file as "tab1.doc" by using "save as" method.... Is there any "save as" method available for doing this process.... thanks in advance.. senthil..

  • HP Mini 110 keeps freezing!

    My wife and I both recently purchased an HP Mini 110 from the same retailer.  After about a 2-3 minutes of sitting idle, the screen will freeze.  The cursor will still move but that's all.  This is happening on both computers.  The only way to fix it

  • ITunes Error Code -42037

    Tried opening my iTunes today and it gave me this "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes. (-42037)". I've never had this problem before. I have a iMac OS X Version 10.9.4 and I do have the latest vers

  • List as function parameter type

    Hi, how to declare list parameter type in function ? I want to call function with list, param2 = ('A', 'B', 'C'...) for example: function(param1, param2) thx