My IPhone all of a sudden pops up saying sim card failed. I turn it off and turn it back on and it works but the next day it happens again. what do you think is wrong with it?
My IPhone all of a sudden pops up saying sim card failed. I turn it off and turn it back on and it works but the next day it happens again. what do you think is wrong with it?
Hello brittbend
Check out the article to further troubleshoot your SIM card issues with your iPhone.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
Regards,
-Norm G.
Similar Messages
-
I bought new apple TV but it open only in the menu few channel like korean channel. I think something wrong with my my Apple TV or maybe my server because I'm in kuwait please help
Was it bought in an Apple store, as there is no product page for Apple TV in your location? If it was bought through another store make sure it was an authorized seller.
There are no apps stored on the device (except Computers and Settings), they are fed through a server and will differ depending on region. For example, there are many that are US only and some require connection to a cable provider. To change accounts and access another region you would need a valid address and credit card. -
Hi! i have a macbook pro 3.1 with core 2 duo, 3gb ram and a 10.6.8 version. I want a 10.7 version but i dont want any speed problems, what do you think?
Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
http://www.etresoft.com/etrecheck
It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely -
My ipod touch wont send an imessage to anyones iphone all of a sudden. the wifi is connected. the sending bar will load then it just stops near the end and it says failed. ive tried 2 different iphones. what might be the problem??
My ipod touch wont send an imessage to anyones iphone all of a sudden. the wifi is connected. the sending bar will load then it just stops near the end and it says failed. ive tried 2 different iphones. what might be the problem??
-
hhello, please help if you can,,,
i had a new screen installed, everything working fine, as was using the phone, the next day I was flying so turn off the phone in the usual way...
oon arrival turned the phone on, received a slow acting black background with the apple sign visual, but never moved from that......... So tried a reset still the same just left looking at the apple sing in the middle if the screen,makes it there for 5 mins but still never turn on completely,,,,,
again I tried,,,,,, again I tried a reset, then started to received lines of white writing, about 4-5 lines slowly like it was being typed, which stateed INCORRECT SHUTDOWN, ????????? then took out my MacBook air, to connect to ITunes to see whaypt I could do,
i tunes did not find the phone as would normally so opened ITunes manually, still did not find the Iphone,,,,,
Any Ideas please, as it is useless stuck in the drawer, I am an apple user, an quite knowledgable having other Iphine 5, IPad air and Mac,,,,, I am stuck,,,,
PLease Help,my hank you in advanceSharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?
Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
I've searched through extensions and add-ons, and checked Firefox's options and preferences, all to no avail.
you must modify '''browser.download.manager.scanWhenDone'''
type in the address bar '''about:config'''
then press the button '''i'll be careful i promise'''
then type in the bar '''browser.download.manager.scanWhenDone'''
then''' double click on it''' to set it to '''true''' (probably you have it false)
'''exit firefox''' and '''restart-it'''.
if you like more info read this:
http://kb.mozillazine.org/Browser.download.manager.scanWhenDone
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
I Am currently having trouble with my iphone 5. After I update my iOs to 8.0.2 i can't update and install new apps on my phone it always on a "waiting mode". I already restore the setting and its works but after two days problem happened again. Pls help
Choose System Preferences from the Apple Menu.
Choose Software Update from the View menu.
Click Update Now.
Select the items you want to install, then click Install.
Enter an Admin user name and password.
After the update is complete, restart the computer if necessary. -
Just downloaded Photoshop and there was a pop up box that mentioned my RAM and something about not enough RAM left for certain 3D features, filters, and image/color graphics(?). I continued. Everything was working fine the first time I went to use it, but the next day I opened the program and could not get any colors to show up. How can I fix this?
Go to Image>Mode and make sure you color is RGB, not gray scale. Also, a preference reset might help: Ctrl/Cmd+Alt/Opt+Shift as you initiate Photoshop startup.
Benjamin -
Help! This all runs quite smoothly until I get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!
I had similar problems, it was a nightmare and on a 3 month ipod too!. I use a Powerbook G4 at home and a G5 at work - both were returning the same problems. so I sent it off to apple, they quickly sent it back saying there was nothing wrong with and it didn't need to be repaired. I tried it again and the same problems occurred "disc cannot be written to or read from." I could copy 20 songs onto it at the very most. A couple of guys at my work suggested updating it on a PC, then adding tunes via my mac as normal - guess what!? it works a treat!?. How ridiculous is that!? an Apple product works best on a PC. these generations of ipods are obviously designed to work best on Intel based Macs. What is wrong Apple? are you abandoning the G-generation!? still, atleast my ipod works for now - it will prove a problem when I have to update the iPod's software since I don't own a PC or an intel-based Mac.
-
Do you see anything wrong with this GL mapping in a cube?
hi,
Can you verify if something is wring with this mapping:
In model 1:
0fi_gl_4 --> 0figl_O02 --> 0figl_C02
the standard cube shows the following key figures and I mapped them to the following fields from the datasource:
DMSOL(in datasource) to 0Debit_LC (in DSO) to 0Debit (in cube)
DMHAB(in datasource) to 0Credit_LC (in DSO) to 0Credit (in cube)
In model 2:
0fi_gl_6 --> 0figl_C01
the standard cube shows the following key figures and I mapped them to the following fields from the datasource:
UMSOL(in datasource) to 0Debit (in cube)
UMHAB(in datasource) to 0Credit (in cube)
1. Do you see anything wrong with this mapping? And what is the solution?
2. What is the problem with the mapping if both cubes sit under the same multiprovider, since 0debit and 0credit are from differnt souce fields?
thnxHi,
Thanks for the explanation.
on #1,
if my goal is to provide a sort of trial balance, credits and debits as two columns, will it be ok to assume that it should be Local Currency or could it be Document Currency, Local Currency 2 or Local Currency 3? If the latter, then how do I decide?
on #2,
i. why will there be difficulty creating a union between the two?
ii. will there also be an inconsistency if I created 2 separate multiproviders for each model, and create a jump query from the 0fi gl_6 model to 0fi gl_c4 model. If not, why not in this case?
iii. So, is there any advantage in placing a multiprovider on each of these models separately? i.e. instead of directly reporting off the cubes separately?
3. I am wondering why in the case of gl_6 (the totals) help.sap recomended to go directly from the datasource to the cube i.e. without DSO in between.
If without the DSO step is an advantage, what are the advantages?
And why then do we use DSOs in most model instead? I will appreciate any reasons you may think of..
Thnx.
Edited by: AmandaBaah on Jul 28, 2009 11:07 AM
Edited by: AmandaBaah on Jul 29, 2009 2:25 AM -
Dear apple management, apple support communities
I have purchased I pad mini e few days ago. I need help as follows:
(1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
(2) How do i sync my pc with I pad mini?
(3)i can read on i pad mini file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
Dr Uma S Nayak
<Personal Information Edited by Host>You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
Syncing music : http://support.apple.com/kb/HT1351
Syncing apps : http://support.apple.com/kb/PH12315
If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD. -
I gave my ipad 2 to my brother last month. After that he erased all content and settings, sign in with his apple id. The next day until now, I found out that I can not udpate my apps both on my iPhone and iPad Air. I had create new apple id, change my password, delete the icloud acc. But still I can not update my apps. I have many of red notifications on iPhone and iPad Air. What should I do? Thank you in advance.
1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
itunes isnt recognising my iphone 4 after i restored my phone and updated it to ios7 on windows, but the computer recognises it...please help ppl..m done with all the recomendations given by apple
if require the new itunes11.1.X
if you already have that and it's windows then uninstall itunes
use regEdit you can type that in run or the likes and search and delete all hits you get on itunes
then reboot windows and install itunes again -
Itunes not transferring music to iphone all of a sudden!
I have an iphone 5 and 5c. Both are authorised by my computer. I managed to sync music onto my iphone 5 but it will only sync some music to my 5c. The 5C has plenty of space on it! (20GB!). I dont know why all of a sudden it wont work properly with my 5C. I have tried syncing loads of times but the same problem keeps happening. Its sooooo annoying! Any help would be very, much appreciated. There is no symbols beside the tracks that didnt sync onto the 5C.
I would check the bottom of the phone to see if there is any debris in the port for the lightning cable. That could be preventing it, or there could be a bent pin, in which case you would need to have Apple look at the device.
Maybe you are looking for
-
Hi When we executed F.03 financial comparitive analysis we are getting around 6 accounts in G/L and 3 accounts in AR as accounts in errors showing some debit or credit balance differences.(When had a glance,in some cases debit and credit differences
-
Excessive Time to launch Web Dynpro iView
Hello, I have an interesting problem here: When I launch the web dynpro Java iView in Portals 7.0, its taking 5-6 seconds to launch the iView. After that its calling the web dynpro application. I couldnt understand why there is such delay?. Has anyon
-
Cs4_deployment.pdf broken link
Hi Guys, I have contacted Adobe several times through online, trying to access the cs4_deployment.pdf file that they link to in several of their knowledgebase articles. They have not fixed the broken link and has been like that for over 3 weeks. Howe
-
BKPF 6000 records and bsid 300,000 records
Which one is better ? 1. LOOP bkpf (6000 records ) READ bsid (300,000 records ) READ ..... READ ..... READ ..... READ ..... ENDLOOP. and the other thing that i concern in (1.) is perhap i have to
-
Making a loaded swf-file loading images into the movie..
Trying to convert my problem from norwegian into english isn't always that easy... :) Anyway.. I've created som cool buttons that I want to be loaded into a movie (let's call i MainMovie.swf) and from there I want the buttons to be able to load image