Colors not showing up in Photoshop. Worked fine the first day, now when I click on a color it comes out in gray tones. Pop up about RAM storage?

Just downloaded Photoshop and there was a pop up box that mentioned my RAM and something about not enough RAM left for certain 3D features, filters, and image/color graphics(?). I continued. Everything was working fine the first time I went to use it, but the next day I opened the program and could not get any colors to show up. How can I fix this?

Go to Image>Mode and make sure you color is RGB, not gray scale. Also, a preference reset might help: Ctrl/Cmd+Alt/Opt+Shift as you initiate Photoshop startup.
Benjamin

Similar Messages

  • HT5479 My brand new ipod nano is no longer connedting to my brand new jbl wireless speaker. It worked fine the first day and now either cannot find the apeaker or the connection "fails."  Any advice?

    I bought my dad a new ipod nano and a jbl wireless speaker from the same apple store. Everything worked perfectly with the bluetooth connectivity the first day. Then my dad accidentally hit the "forget this device" button when he was trying to turn the bluetooth off. Now the nano either does not recognize the device or it will recognize the device but not connect. I would appreciate any advice.

    Does it charge on a computer? Does it appear in iTunes?
    If so:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    Also see:
    - See:      
    iPod touch: Hardware troubleshooting
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

  • Itunes 8 worked fine the first time, now it keeps trying to reinstall.

    So I downloaded itunes 8 the first day it became available with no problems. I opened it to make sure all my music was there, and turned on Genius then closed it. The next day when I go to open itunes, it tries to install again and it gave me an error message saying there was a fatal error with the shortcut or something like that. I've tried to download again and I get the same message. I also tried to uninstall and I get the same error message. I don't know what to do. I've tried every solution to fix the problem posted on this site with no luck. I'm banging my head against the freakin desk. Can anyone help me, if it helps I have vista and it gives me error 2330 saying windows encountered an error while installing the package, then it tells me there is a fatal error with the shortcut.
    Thanks alot Apple.

    I had a similar problem with 8.0 a few days after upgrading from 7.7 to 8.0. I received a message as the following:
    '3DE45K...........12KD' is not a short filename'.
    I finally got rid of this by detaching my USB flash drive, which contained foler name mentioned in the error message.
    If you are getting a specific file/folder name, I would suggest finding out where it is. You should get some idea how to attack it.
    To get a prior version of go th the following URL:
    http://www.filehippo.com/download_itunes/
    and look on the right side for release you want.
    Uninstall 8.0 and install your desired release of iTunes.
    To get the library for a prior release (iTunes won't work with a library created by a newer release), go to the "Previous iTunes Libraries" folder. Copy the file the appropriate file and rename the duplicate file to "iTunes Library.itl". Place it in the "iTunes" folder, replacing the file that was created for iTunes 8.0.
    At this point, you should be good to go. the number 8 may be lucky for the Chinese but it is a disaster for iTunes.

  • I have a Rocketfish mini display port to VGA adaptor cord for a macbook pro, it was working fine the first week, now it does not show what I am seeing on my laptop on my lg Flat screen tv. It only shows the space background but not any icons. Any help??

    Is there anything I should do to the TV or any settings i should do from my actual Macbook? It only shows the space background but not any of my icons or what i am seeing on my laptop screen. It is a new adaptor which was purchased last week.

    It seems as though though it may be a connection issue, possibly hardware or adapter. Make certain the connections are TIGHT.
    For software you may try a smc reset:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Try a pram reset:
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.
    If no joy you can take it in to an Apple store genius bar for a free evaluation make an appointment first.
    http://www.apple.com/retail/geniusbar/

  • TS2972 First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first

    First night I was able to watch 2 TV shows (45 min each) with no problems, but thereafter programs will not stream without constant pause to buffer. Weather conditions are ideal and my internet comes from crappy hugesnet, but worked fine the first night.

    The speed may have been ok at that time and is too inconsistent/too slow overall. interference may have proven to be more of an issue since as well. If using public DNS that will provide Intermittant results
    I'm sure using a hotspot would be fine but it depends on your viewing habits. An HD movie is around 4-5GB. It would also be subject to speed. requirements so best to test to see how it compares.
    You would have to check with your Carrier if hotspot it's enabled then just to into your settings and toggle it ON

  • Lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

    lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

    Reh... Doesn't work on my 2012 Mac mini. A function key set in Sys Prefs worked in Leopard and Lion on my MB but I cannot get any key to work using SysPref Dictation & Speech. It is befuddling and now I have to go to Edit-Speech to turn on and turn off speech to selected text.
    I have used Macs and Apple 2es since cave man days and Apple is becoming so befuddling I am wondering if there is even an advantage to it over Windows XP. I spent a lot on this little box, it looks good (the first one had to be exchanged as it wouldn't link to my keyboard ???) but Apple intuitive does no longer seem meaningful.
    If speech to text no longer is accessible by short cuts using Fkeys, why bother to have it in Syst Prefs?
    Apple is losing its way. The pleasure is gone and no one at Apple seems to care.

  • I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

    I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
    I’m using a PreSonus Firebox audio interface.
    It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard.  I tried different midi controllers, different keyboards, different midi cords, and check midi preferences.  The audio interface is working fine and is recogonized, but the midi doesn’twork.  I re-started the computer several times and then finally it miraculously starts working again.
      I’ve been having to this every day now.  Any help or ideas is very much appreciated.

    I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

  • I have an ipad 2 the itunes program worked fine at first but now it will not connect to the store. it says 'secure link to itune store failed' i have uninstalled it and reinstalled it. what do i do

    i have an ipad 2 the itunes program worked fine at first but now it will not connect to the store. it says 'secure link to itune store failed' i have uninstalled it and reinstalled it. what do i do?

    Doublechecking before proceeding. Is iTunes endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?

  • Youtube loads but then when i click on a video it doesent play. it worked fine the other day and in the past and suddently it doesnt work. please help!!!!!!

    youtube loads but then when i click on a video it doesent play. it worked fine the other day and in the past and suddently it doesnt work. please help!!!!!!

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • IPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black.

    iPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black. What's happening ?  I show an incompatible upgrade available for OSX Maveriks, which I have not yet installed.

    What version of iPhoto are you using?  Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

    I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

    Here you can see how you can setup your Hotmail accounts in the Mail App on the iPad; http://convert-dvd-ipad.com/dvdipad/setup-hotmail-microsoft-exchange-ipad-2/

  • I'm now showing I have 9 updates in the App Store but when I click on updates it is blank and won't load. Tried to reset but didn't help. What now?

    I'm now showing I have 9 updates in the App Store but when I click on updates it is blank and won't load. Tried to reset but didn't help. What now?

    Try again later today or tomorrow. Other users are posting the same issue >  Apps update not working. Was before but...: Apple Support Communities
    The problem has been reported to Apple.

  • I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

    I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

    Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
    Do the SFC /SCANNOW again.
    If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com.  Install, update virus definition then perform a full scan.  Remove if it did find some viruses or trojans.  Restart computer.
    Back to regular windows, do the SFC /SCANNOW again.
    If that doesnot work, check to see if your Hard drive has errors or bad sectors
    GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
    Choose "Tools" tab and under error checking, click "Check Now".
    Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
    Restart windows will perform the above task to fix errors  This may take hours depends on how big is your Hard Drive
    Good Luck!!.

  • I cannot get Adobe ExportPDF to work. The screen is blank when I click on Select PDF files to Export.  I use windows 7.

    I cannot get Adobe ExportPDF to work. The screen is blank when I click on Select PDF files to Export.  I use windows 7. I also tried to export a document directly from Adobe Reader using the tool, but it gave me an error message. Any suggestions?

    Hi,
    Try to use different browser.
    Would it be possible for you to send me the document so that i can take a look at my end?
    You can email me at:[email protected]
    Regards,
    Florence

  • Can anyone tell me how to get 888 poker to work om my airbook? Strange thing is the instant play version worked on the first day i tried it, but not since.

    As the title. Worked ok on the first day, since then the instant play tries to load but does not. Have downloaded flash to no avail.
    Any help greatly appreciated by this Mac noob.

    :"In order to access the Java Applet you need to have the following ports open when you are accessing the Internet;
    21, 25 and 110"
    What 888 sent me.

Maybe you are looking for